Used three-jaw chucks for sale (557)

Condition: excellent (used), three-jaw chuck diameter: 250 mm, through hole: 75 mm, Diameter: 250mm Codpezdidtofx Agrohd 3 Chuck: x Spindle bore:75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Outer diameter of chuck: 240 mm Bore: 77 mm Overall height: 105 mm Equipped with a short taper chuck flange according to DIN 55027, size 6 Includes externally stepped jaws and chuck key. Csdpfodaqddsx Agrehd Internally stepped jaws are not included!

Condition: used, Outer diameter of the chuck: 85 mm Bore: 19 mm Overall height: 41 mm Cjdpedaqgmefx Agrjhd Includes jaws that are stepped outward, chuck key. Jaws that are stepped inward are missing!

Condition: used, Three-jaw lining, 3-jaw lining -Feed size: Ø 200 mm -Passage: Ø 56 mm -Rezess: Ø 75 mm, Ø 103 mm Chedsd Ira Tspfx Agred -Weight: 17.9 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 270 mm -Throughout: Ø 85 mm -Short taper: 6 -Recess: 157 mm -Weight: 38 kg Chedpfx Agod Itcgsrjd -with: signs of usage but functional

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 215 mm -Throughout: Ø 67 mm -Weight: 14 kg Chsdpfxjdz Smlo Agrjd

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Passage: Ø 57 mm -Weight: 10 kg Chedpod Erwfsfx Agrjd

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg Chsdpfsd Ew Txsx Agrod

Condition: used, Flange mounting, driving flange -Chuck flange with: driving pin Codpjd Hcq Refx Agrshd -Outer diameter: 250 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 17 kg

Condition: used, RÖHM 3-Jaw Chuck, Used Type DURO-T315 Codswm D Rtspfx Agrshd - without jaws -

Condition: ready for operation (used), functionality: fully functional, Gang drilling machine with 4 units, gear transmission, and feed. One unit equipped with a thread cutting device. Tool holder MK 4. Chodex S U Uyopfx Agrsd

Condition: ready for operation (used), Outer Ø: 165 mm Bore: 45 mm Total height: 85 mm Short taper mount: Chjdpexb A Nnofx Agred with 4 studs M 10

Condition: like new (used), Year of construction: 2010, Hydr.power chuck Fabr.RÖHM Type : KFD-315 Bj.ca.2010. Diameter :315 mm Nmax:2800rpm in very good condition Chodpfxsqxavle Agrsd

Condition: used, Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 30 mm -Dimensions: see photo techn. drawing -Total dimensions: 105/90/H75 mm Codpfxsq Ei D Ue Agrohd -Total weight: 3,6 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Chjdeq Ei Ekopfx Agrsd -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Quantity: 2 sets of interchangeable jaws available Price: per set -Overall dimensions: 70/60/H54 mm Total weight: 1.1 kg/set

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set Cedpfsq Exiaex Agrjhd -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Total dimensions: 82/63/H74 mm -Total weight: 1.9 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard Chodpfjq Exilex Agrjd -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 66/60/H43 mm -Total weight: 0,8 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 18 mm Cjdpfx Agjq Exiwershd -Dimensions: see photo techn. drawing -Total dimensions: 62/54/H47 mm -Total weight: 0,7 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set Chjdsq Exizepfx Agrod -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 75/65/H45 mm -Total weight: 1.0 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Chedpfjq Exi Tjx Agred -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 14 mm -Dimensions: see photo techn. drawing -Total dimensions: 48/42/H33 mm -Total weight: 0,3 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Width: 50mm Csdpjrq Nm Uefx Agrohd -Bore: Ø 17 mm -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 180/150/H80 mm -Total weight: 13.3 kg / 13.5 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate Chedjfgb Uxepfx Agrod -Outer diameter: 240 mm -Inside diameter: 103 mm -Hole circle: Ø 133 mm -Dimension: Ø 240/H160 mm -Weight: 7.6 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard Chjdpfor R Aansx Agred -Jaw width: 24 mm -Dimensions: see photo technical drawing -Number: 2 sets of interchangeable jaws available -Price: per set -Dimensions total: 90/70/H65 mm / 90/72/H67 mm -Total weight: 2.2 kg/set

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Chuck size 195 mm diameter -Passage: Ø 60 mm Chsdpelzmw Ujfx Agred - Accessories: incl. clamping tool -Weight: 18 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 16 mm -Dimensions: see photo technical drawing -Overall dimensions: 56/48/H40 mm - Total weight: 0.5 kg Chedjq Rg Uwopfx Agred