Used surface grinding horiz. 400-699mm grind. length for sale (234)

Condition: new, Year of construction: 2025, 0600 mm 300 mm 382 mm 700x340 mm 355x38x127 mm Ppsdpfx Aaowp Taiolsl 2400 U/min

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, grinding length: 500 mm, grinding width: 400 mm, ELB Smart Line S 5 STC, year of manufacture 2008, grinding area X/Y/Z: 500mm/400mm/475mm, grinding wheel dimensions: 300mm/50mm/76.2mm, table speed up to: 30m/min, max. table load: 400kg, spindle taper: 36mm, control: Siemens STC, magnetic chuck 500 x 250 mm (can be enlarged), incl. coolant tank with paper filter system, grinding spindle with new bearings, all functions checked, in very good condition. The machine can be inspected under power at our facility; test grinding is also possible. We are happy to handle installation/training at your site as well as ongoing service in the future. Pedpfor D R I Sex Aalspl

Condition: used, functionality: fully functional, Opportunity to acquire a good condition 1400 J&S surface grinder. Ppedpjwtfngefx Aalsl Machine has been purchased from a liquidated company previously. Current pricing on these is between £5,000 - £8,000 +VAT in perfect condition. *Important Note* - This machine looks like it has been wired up to a secondary electrical panel, which is not included in this sale. Viewing recommended so the buyer can see the wiring arrangement. Sold as seen, viewing available on request.

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, grinding length: 600 mm, grinding width: 375 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Optimal 6375 SPS, year of manufacture 1995, grinding area 600 x 375 mm, grinding wheel 300 x 50 mm, spindle power 3.7 kW, automatic grinding cycle with roughing, finishing, spark-out, and lift-off. The dresser is mounted on the spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry specifications of a new machine. The grinding spindle has been newly mounted. Accessories: electro-permanent magnetic chuck 600 x 350 mm, coolant tank with automatic paper filter. All functions have been tested and the machine can be demonstrated under power at our facility. We are happy to handle installation and on-site training, as well as future service needs. Financing / leasing is not a problem, and we will be happy to provide an offer! Ppodpfxexdalfj Aaljl

Condition: good (used), Year of construction: 1991, Technical data - Table surface: 800 x 450 [mm] - Grinding surface: 800 x 500 [mm] Ppedevx E Rtspfx Aalel - Max. distance between table surface and spindle: 650 [mm] - Max. weight on the table: 400 [mm] - Spindle speed: 1400/1700 [tr/min] - Dimensions of the grinding wheels: 350 x 127 x 50 [mm] - Dimensions of the machine: 3350 x 2100 x 1750 [mm] - Weight: 2900 [kg]

Condition: excellent (used), Year of construction: 2000, Jung Supromatic HF 50 EVO Jung Supromatic HF 50 EVO Surface Grinding Machine, year of manufacture 2000, in excellent, fully overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Technical Data: Psdswzmgyopfx Aalepl Year of manufacture: 2000 Technical specifications Clamping surface (L x W in mm): 600 x 200 Maximum grinding area (L x W in mm): 600 x 250 Maximum magnet size (mm): 500 x 200 Maximum grinding wheel dimensions (mm): 225 (250) x 25 x 51 Table to spindle center distance (mm): Max. 400 Table longitudinal feed (reciprocating, m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive speed (rpm): 800 – 4200 Power output kW (with creep feed): 1.6 – 2.2 Approximate machine weight: 2.0 t Accessories and Equipment: • Magnetic chuck • Coolant system • Machine feet • Grinding wheel About the machine: We offer a Jung HF 50 EVO surface grinding machine, year 2000, in excellent condition. The machine is, of course, fully functional and has only approx. 50 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung operates very quietly. This newer generation of surface grinders is highly user-friendly and enables the production of surfaces with a low Rz value. Take the opportunity to inspect this machine under power on site and see its condition for yourself. Scope of overhaul: Mechanical service: • Complete mechanical overhaul • Hydraulics • Infeed mechanism • Lubrication • Cross and vertical adjustment • Grinding spindle • Wheel dresser • Repainting in new machine quality Geometric service: • Guideway grinding by the manufacturer (optional) • Scraping of guideways • Column realignment, measurement, possible scraping/grinding, refitting with pressure plates, inspection and preparation of guideways • Adjusting crosshatch at spindle head • Alignment of wheel dresser • Regrinding of table and magnet • Machine acceptance according to manufacturer’s test sheet Electrical service: • Replacement of complete wiring, all limit switches and pushbuttons • Conversion of X-axis from cam switch to contactless limit switches (HF 50) • New control cabinet • RSF position display (2- or 3-axis readout) • Magnet holding force control for 24V or EP magnetic chuck Control modernization: • New auxiliary control cabinet (operator panel top right) • Thyristor control for grinding spindle drive • Manual cylindrical wheel dressing with top dresser or side dresser (for Diaform operation)

Condition: excellent (used), Year of construction: 1997, DETAILS PRECISION SURFACE GRINDING MACHINE Manufacturer: JUNG Model: JF 520 Year of manufacture: 1997 Machine weight: 2200 kg Total weight: 2600 kg Location: Haiger Psdpfjxqa I Tox Aalspl Price: €24,000 excl. VAT Description: Serial no.: 3821, Digital readout, manufacturer Heidenhain, microprocessor control, profile dressing device, manufacturer Diaform, machine lighting, coolant system, magnetic clamping table. Technical Data: Clamping surface (L x W in mm): 600 x 200 Grindable area (L x W in mm): 600 x 250 Max. magnet size mm: 600 x 200 Max. grinding wheel dimensions (mm): 225 x 25 x 51 Distance table/spindle center (mm): 350 (+50) Table longitudinal feed reciprocating (m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive speed (rpm): 800 – 4200 Power kW (with creep feed): 2.2 (3.5)

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: M60I/9035, Offer Number: M60I/9035 Machinetype: surface grinding machine Ppodsw N Dmxopfx Aalel Make: STÖCKEL Type: FX60/30 SPS Constr. year: 2010 table size: 600 x 250m Location: Germany

Condition: like new (used), Year of construction: 2017, operating hours: 59 h, functionality: fully functional, grinding length: 400 mm, grinding width: 200 mm, feed length X-axis: 510 mm, feed length Z-axis: 220 mm, feed rate X-axis: 20 m/min, grinding wheel diameter: 205 mm, distance table to spindle center: 357 mm, table load: 120 kg, type of input current: three-phase, grinding wheel width: 16 mm, spindle speed (max.): 3,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 2,100 kg, grinding spindle motor power: 2,200 W, grinding wheel speed: 3,600 rpm, input voltage: 400 V, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 Colour touchscreen: Yes Maximum grinding lenght x width: 400 x 200 [mm] Stroke X axis (table movement): 510 [mm] Min. Stroke speed X axis: 100 [mm/min] Max. Stroke speed X axis: 20000 [mm/min] Z axis travel (transverse movement): 220 [mm] Min. distance spindle nose / table: 22.5 [mm] Max. distance spindle nose / table: 357.5 [mm] Max. load on table: 120 [Kg] Grinding wheel min. speed: 1000 [rpm] Grinding wheel max. speed: 3600 [rpm] Grinding spindle motor power: 2.2 [kW] Max. diameter grinding wheel: 205 [mm] Max. grinding wheel width: 16 [mm] Min. grinding wheel width: 6 [mm] Grinding wheel bore: 31.75 [mm] Number of running hours: 59 [h] Supply voltage: 400 [V] Total power required: 11 [kVA] Weight : 2100 [Kg] INCLUDED EQUIPMENT: x1 150 [L] coolant tank FB1/R with papertape filtration unit FB1 x1 BRAILLON electro-permanent magnetic chuck type EPEFINE 2 x1 BRAILLON magnetic chuck remote control, microprocessor-based, type T10 x5 grinding wheel flanges x1 oil chiller x1 transformer Pjdow Hf Hispfx Aalepl x2 service keys x1 balancing shaft x1 set of axis-brackets for transport STANDARD CONVERSATIONAL PROGRAMMING MODE: Straight and angular dressing (standard) Surface grinding, multiple plunge grinding, and face grinding (standard) INCLUDED ISO PROFILING: Wheel profiling Contour machining of workpiece Full functionality for V-shape and freeform programming on the grinding wheel, and ISO contouring on the workpiece. Precise positioning integrated: +/- 1 [μm] Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Similar machine to brands like Jones & Shipman, Jung, Favretto, Blohm, Studer. Also see cylindrical grinder, lathe, machining center, milling machine.

Condition: used, Cup Surface Grinding Machine / Cylinder Head Grinding Machine Psdpfjwlbz Tsx Aalspl Max. grinding area approx. 550 x 250 mm Electromagnetic clamping plate 500 x 200 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1985, functionality: fully functional, ELB - SWN 5 VA II Surface Grinding Machine - Grinding area X/Y/Z: 525x375x255 mm - Magnetic chuck: 700x300 mm - Table clamping surface: 900x250 mm - Table longitudinal travel: 10-625 mm - Max. table load: 280 kg Ppodpfx Aasxn Szyolol - Table feed: 1-30 m/min - Reciprocating grinding: 3-30 m/min - Distance, table to spindle center: 525 mm - Vertical feed speed: 2-180 mm/min - Adjustable infeed: 0.001-2 mm - Grinding wheel speed: 3000 rpm - Coolant system - Machine feet - Documentation - COMPLETE TECHNICAL DATA SEE PHOTOS Dimensions: LxWxH 2.7x2.2x2 m / Weight 3500 kg Subject to errors and input mistakes.

Condition: used, Vertical grinding machine, surface grinding machine DORMAC / DORIA type Perseo Cup grinding machine No. 786 Year of manufacture 1987 Sanding area 500 x 250 mm Magnet 400 x 150 mm Ppodpfevkgvhex Aaljl Grinding height grinding wheel - magnet approx. 190 mm Grinding height grinding wheel - clamping surface table approx. 235 mm Grinding wheel diameter 175 mm Table longitudinal movement approx. 600 mm Grinding wheel speed approx. 2800 rpm Motor power approx. 2.2 kW Mains connection 380 Volt, 50 Hz - Manual depth adjustment via handwheel, travel per handwheel rotation, Z-axis 2.5 mm = 0.01 mm per graduation mark - handwheel on the right of the spindle housing, fine adjustment via knurled wheel on the handwheel - Manual transverse adjustment via handwheel, travel per handwheel revolution, Y-axis 2 mm = 0.01 mm per graduation mark - Hydraulic longitudinal table movement - mechanical magnet WAGNER, type 0112N-15/40-4 400 x 150 mm, height 45 mm - Wet grinding unit with settling filter opposite - 2 grinding wheels Ø 175 mm - 1 grinding wheel holder - 1 balancing device for the grinding wheels Space requirement L x W x H 1500 x 1100 x 1800 mm Weight 570 kg good condition

Condition: used, Year of construction: 1980, ABA surface grinding machine FF450/30 for sale. The machine is fully functional. Year of manufacture: 1980. Working area: L450xB280mm. Weight: 1500 kg. Power: 10.54 kW. Ppedpfx Asw D Snhoalol

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 250 x 500 mm Installation height (max. distance spindle/table): 500 mm Max. Table load: 250 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2250 x 1400 x 1800 mm Weight, approx.: 1350 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel Ppedpfxop Dt T Ns Aalsl - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Pictures may show the machine with special accessories and with application examples.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 200 x 450 mm Installation height (Max. distance spindle/table): 450 mm Max. Table load: 150 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2080 x 1200 x 1700 mm Weight, approx.: 950 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Psdpfx Aop Dt Ttjalspl Note: Picture shows FSM 2550 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: new, Precision surface grinding machine MIOTAL FSM 3060 AH Table size: 300 x 600 mm Installation height: 500 mm Max. Table load: 300 kg Motor power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All cast parts, e.g. machine stand, table etc. made of MEEHANITE® quality casting - Automatic cross and longitudinal feed - Permanent lubrication - Automatic cross lifting device - Splash guard on the rear - Grinding wheel - Grinding wheel flange - Honing device - Balancing mandrel - Balancing scale - Dressing diamond - Machine light - Leveling elements - Operating tool - Operating instructions - CE Special equipment of our storage machine: - Electric magnetic clamping plate 300 x 600 mm (fine pole) - 2-axis digital readout, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic vertical infeed AD 5 (NC-controlled) for model AH - mode of operation: Automatic rapid traverse vertical and automatic fine feed vertical - Automatic demagnetization control for magnetic clamping plate - Coolant system with magnetic separator - Manual dressing device - Parts enclosure - Ergonomically arranged control panel - Additional grinding wheel flange - Ball screw for cross feed - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 Alternative equipment features / other machine configurations on request. Pjdpfx Aajd Sfd Ejlspl

Condition: used, Year of construction: 1982, grinding length 0600 mm grinding width 200 mm workpiece height 250 mm magnetic plate size 600 x 200 mm total power requirement 4,5 kW weight of the machine ca. 2,5 t Ppsdpfxou Rt Die Aalsl dimensions of the machine ca. 2000 x 1200 x 1650 mm With magnetic plate 600 x 200 mm and automatic dressing arrangement.

Condition: used, Year of construction: 1987, grinding length max. 600 mm grinding width max. 320 mm workpiece height max. 500 mm Pjdpfxot Nzh Sj Aaljpl magnetic clamping plate 300 x 605 mm horiz. table movement: longitudinal hydr. max. 750 mm horizontal table movement: cross hydr. max 340 mm sanding disc diameter 350 mm grinding wheel width 40 mm bore 127 mm spindle turning speed range 1500 U/min rapid traverse vertical 400 mm/min total power requirement 3,7 kW weight of the machine ca. 2200 kg dimensions of the machine ca. 2300 x 1800 x 1850 mm

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 26BB2444, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Electrical Data Connection: 380 V / 50 Hz Psdpfx Asxliwyealopl Rated power: 10 kVA Fuse rating: 25 A Control voltage (AC): 220 VAC Control voltage (DC): 24 VDC EQUIPMENT Coolant tank

Condition: refurbished (used), grinding length: 600 mm, grinding width: 200 mm, grinding length 600 mm grinding width 200 mm electromagnetic chuck 450×175 mm X-travel 660 mm Z-travel 225 mm grinding wheel size 250x25x51 mm Control Jung TouchScreen Ppedpfxexal Hyo Aalsl weight approx. 3000 kg

Year of construction: 1962, condition: good (used), machine/vehicle number: 3791, max. grinding length: 620 mm Ppjdpfxed Ihiis Aaljl max. grinding width: 250 mm table plate chuck: 200 x 620 mm grinding plate measures: 200 x 220 x 51 mm electrical connection: 380 V, 1/1,8 kW space needed: 1650 x 1450 x 1800 mm weight: 1350 kg

Condition: good (used), functionality: fully functional, table dimensions: 830mm x 200mm magnet dimensions: 600mm x 200mm grinding wheel dimensions: 250mm Ppedpfjxg Td Tsx Aalsl stroke x:720mm y:250mm z:320mm automatic feeds on x and y axes z-axis height electrically adjustable height:1600mm x length:1800mm x depth 1500mm weight: 1700kg Financial information VAT/margin: Margin: The displayed price includes VAT (VAT not deductible for businesses)

Condition: good (used), Surface Grinding Machine ELB SWB06-VAII - Grinding length: 600 mm - Grinding width: 500 mm - Spindle speed: 1400/2800 rpm - Z-axis feed: Automatic / Manual - Y-axis feed: Automatic / Manual - Grinding movement: Automatic / Manual - Magnet size: 600x500 mm - Automatic feed - Grinding wheel dressing device Ppjdpfx Ajxgicxsalol - Max. grinding wheel diameter: 300 mm - Coolant system - Drive power approx. 6 kW Dimensions: LxWxH 2.6x2.2x2.5 meters / Weight 3,500 kg Errors and omissions excepted.

Condition: good (used), Magnetic table 455 x 170 mm digital display Podpfx Aetu Il Tealjpl water tank Honing device Wet sanding device

Condition: refurbished (used), functionality: fully functional, grinding length: 630 mm, grinding width: 230 mm, total height: 1,650 mm, total length: 1,535 mm, total width: 1,770 mm, grinding height: 360 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 20 m/min, grinding wheel diameter: 400 mm, table load: 180 kg, rotational speed (max.): 3,220 rpm, power: 1.5 kW (2.04 HP), disc diameter: 250 mm, Retrofit of Surface Grinding Machine TOS BSKF 20 NC with SCHNEIDER Control System - Machine is fully dismantled and retrofitted Standard Accessories: Psdpfexf Ez Uox Aalspl - 2-axis cycle control, manufactured by Schneider-Electric Functions: Infeed, Spark-Out, Dressing, and Compensation - Grinding wheel 250 x 20 x 76 mm - Grinding wheel flange - Electro-magnetic chuck 600 x 200 mm - Automatic feed on Y and Z axes - Diamond dresser holder (without diamond) - Coolant system with settling tank - Machine lamp - Centralized lubrication - Operating tools - Operating manual - CE declaration - Inspection report Included: Transport and packaging On-site relocation with crane/forklift Commissioning Travel and accommodation expenses Accessories: - Partial enclosure - Single-point diamond, 0.75 ct - Balancing arbor with nut and wrench - Grinding wheel balancing stand - Set of levelling elements - Oil filling