Used Ovens for sale (254)

Year of construction: 2017, Condition: like new (used), Vacuum Oven Nabertherm NRA 25/06 built in 2017 Serial number 211983 Includes exhaust cap With circulation fan Condition: Used, very good Cshx Doppv N New N Ujrb Oven room dimensions WxDxH in mm: 225x500x225 External dimensions WxDxH in mm: 750x1700x1800 Oven chamber volume in liters: 25 Furnace room temperature in °C: up to max. +650°C Controller: P470 Fumigation with protective gas possible Evacuation / vacuum possible (final vacuum 5 mbar) Cooling with cold water Vacuum furnace

Year of construction: 1989, Condition: good (used), Functionality: unexamined, Firing temperature up to max. 900°C Electronically heated Lots of accessories available (buffer storage, heating wires, sensors, etc.) The oven was purchased as new from a company liquidation and stored. The display on the control cabinet shows a total power consumption of just over 7000kW. Cohx Dwovll Hns N Uerb Forklift and tank rollers for loading on site.

Condition: excellent (used), Transport data Feeder length 9m35cm Width 70 cm Crohx Dw Njrq D Uyj Usb Height 130 cm Sawing width 150 cm Length 150 cm Height 150 cm

Year of construction: 1986, Condition: used, Functionality: unexamined, machine/vehicle number: 43563, Heating: Gas Fuel gas: Propane Gas overpressure: 10-50 mbar Crehxovkwqvo Dw N Ujb Working temperature: 150-450 °C

Condition: like new (used), Memmert Heating oven UFE 600 + 250 °C Cshx Dw Nevit Ibe Usrb Drying oven 2 pieces in stock

Condition: used, Tempering oven ARTUR NOLZEN type TL30/30/50 Warm air oven, convection oven, heating cabinet Fabrication no. 14785 Year of construction 1996 Temperature range max. 750°C Internal dimensions 300 x 300 x 480 mm Inner width at center bar 260 mm Connected load 6 kW Mains connection 400 Volt, 50 Hz - Temperature control NOLZEN type TRO t - 96 4 - THEBEN time control, type TR 635 top Crjhxjq Ubqio Dw N Ueb - Heating time to 750° C in approx. 95 min. Space requirement L x W x H 1300 x 1100 x 1400 mm Weight 310 kg good condition

Condition: ready for operation (used), Manufacturer: Beck Cshx Dwsu Nuyio N Ujrb -external sizes: 1700x1010x1400mm -Permeable cross section: 540x240mm -The temperature range: 0-400 °C

Year of construction: 1987, Condition: used, Drying oven, drying cabinet, chamber dryer oven, heating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet -Manufacturer: GFO, chamber dryer oven type KE-SO -Useful space: 1 m³ / 1000x1000x1000 mm -Heating power: 40 kW -max temperature 350°C -Working temperature: 100 to 300°C -Individual components: see photos Crshsryalbsx Dw N Uob -Setup dimensions: 2510/1600/H3760 -Transport dimensions: 2510/1600/H2380 mm -Weight: 1500kg

Year of construction: 1969, Condition: used, Technical data: Power: 2.2 kW Connection: 220 V Dimensions: Frame (WxDxH), approx.: 310 cx 355 x 755 mm Oven (WxDxH), approx.: 370 x 550 x 400 mm Oven interior (WxDxH), approx.: 180 x 23.5 x 120 mm Equipment: Crohx Dwsu Atiij N Usb - Various tongs

Year of construction: 1988, Condition: used, Functionality: unexamined, machine/vehicle number: 26535, Heating: gas Fuel gas: propane Gas overpressure: 80-100 mbar Working temperature: 150-750 °C Heating output: 550 °C (300 kg/h steel) Max. permissible load weight: 350 kg gross Type of loading: automatic with loading device Type of unloading: manually via loading device Max. batch dimensions: 610x910x460 mm Crshx Dwevkwifo N Ujb

Condition: used, Vacuum furnace, make BMI Processes: Annealing, ageing, quenching and tempering, low-pressure carburizing, carbonitriding Type: P164TH – 2 chambers with oil quenching Cohx Dw Nsvf D Rlo Ujrb Useable dimensions (BW x H x D): 600 x 600 x 900 Temperature: max. 1050°C Charge: 800 kg Vacuum: 10-2 mbar Loading power: 285 kVA

Year of construction: 1985, Condition: used, max. temperature 1250 Grad Crehst Hxc Iox Dw N Usb size of opening 250 x 160 mm depth of chamber 500 mm total power requirement 8 kW weight of the machine ca. 0,2 t dimensions of the machine ca. m

Condition: excellent (used), Industrial furnace, Industrial furnace, Furnace, Furnace, Used machine Manufacturer : Vötsch Type : NTL 60/60 Overall dimensions : 1000 x 1100 x 1820 mm Maximum temperature : 250 °c Cjhjt H Nh Usx Dw N Uorb Cassette , tray : 2 pcs Electrical data : 400 V; 7,2 KW; 11,5 A

Condition: used, Drying oven, drying cabinet, electrode re-drying, electrode cabinet -Drying oven: with isolating transformer Crohx Dwsc R Ix Uj N Uob -electric: heated -Steel lining -Interior dimensions: 100 x 420 mm -Number: 3x ovens available -Price: per piece -Dimensions furnace: 170/190/H570 mm -Dimensions transformer: 330/220/H360 mm -Weight: 14 kg/piece

Condition: good (used), Year of construction: 1995, Functionality: fully functional, Useful Dimensions : W600*D900*H900 mm Loading Capacity : 800 kg/batch Cooling Pressure : 10 bar (abs.) Crjhx Dw Njvfpfzo Uob Vacuum Level : 10exp-2 mbar (manufacturer specs.) Cooling Gas : N2

Year of construction: 2002, Condition: excellent (used), Functionality: fully functional, Dear Mr./Mrs, we have opportunity to offer you PLATEG plasma (ion) nitriding equipment. Chamber is with hot wall. Equipment is in excellent condition, fully functional, without any problems, ready for use. Equipment characteristic: - Dimensions of construction: 2700 mm x 1250 mm x 800 mm - Dimensions of chamber: Diameter 1000 mm x 1200 mm - Maximum dimension of nitriding batch: Dimeter 900 mm x 900 mm Crshx Devfm I How N Ueb - Total equipment power: 70 kVA - Power of heaters: 30 kW - Power of plasma supply (BIAS): 30 kW - Plasma supply is unipolar, voltage 0-1000V, current 0-60A, DC to 33 kHz, pulse on and pulse off adjustable - Plasma supply (BIAS) is only one year old, bought from Germany (El Connect company) - Vacuum pump: Pffeifer vacuum 65 - Vacuum system is controlled by new electrical cabinet with PLC and HMI - 4 MFC for dosing gasses - Plasma nitriding process, post oxidation process Company Planit is also giving assembly services of this equipment, maintenance manual, user manual, technology (nitriding and oxidation) and also service. For any question, don't hesitate to ask. Best regards.

Year of construction: 2020, Condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Cohofz Anpsx Dw N Ujrb Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: good (used), Year of construction: 2015, Functionality: fully functional, total length: 1,800 mm, total width: 970 mm, total height: 1,500 mm, Vacuum stove for sale Technical data: Electric power: 30kW (3x400V, 50Hz) Cehx Dw Novdyihj Ujrb Furnace dimensions and weight: 1800x970x1500; 300kg Electric cabinet dimensions and weight: 780x600x1550; 200kg Max operating temperature: 850°C Cooling water consumption: 200 l/hour Heating time: approx. 1 hour Cooling time: approx. 3 hours (up to 400°C) Year of production: 2015

Year of construction: 2011, Condition: good (used), Heated surfacefinishing machine Cohx Dw Nsfndpne Uorb for Zink-magnesium coating Tank capacity : 150 l Heating power: 20 kW Weight: 1230 kg

Condition: good (used), Laboratory Tube Furnace Naber R70/9 - Housing made of high quality structural steel. - The diameter of the tube is 70mm - The length of the tube is 1000mm - Tube made of sillimantine, works with two end caps 60 - damaged on one side. - Silent electronic relay - Maximum temperature - 1200C - Temperature drop - 10 C / min Crjhx Dody Huyow N Ueb - Programmable temperature curve

Year of construction: 2021, operating hours: 100 h, Condition: like new (used), The chamber furnace is best suited for preheating, drying, curing and other thermal treatment processes of various materials in the temperature range from 50⁰C to 150°C. We can highly recommend this furnace as ammunition dryer. Chamber volume: 7392 Chamber dimensions: 2200x1400x2400mm (WxDxH) Crshjlk Hiisx Dw N Ueb Outer dimensions: 3050x2700x2720mm (WxDxH) Maximum temperature: 160 Heating power: 54kW Total power: 59kW Own weight: 2800kg

Year of construction: 2020, Condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters. Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process. Series SL Power Electricity Forced air circulation Two-channel USB temperature recorder Number of temperature sensors MTS 2+ Wall insulation thickness (mm) 240 Ceiling insulation thickness (mm) 300 Number of programs 20 Max. Number of steps in the program 10 Average heating time up to 180 ° C 40min 35min 25min 25min 20min Cjhefy T H Iox Dw N Uerb Number of door leaves 2 Diagnostics / update via the internet Media consumption meter Stainless steel ceiling elements Direct heating Explosionproof closures Silicone door seal Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff. ThPID was created to offset the effect of inertia called hysteresis. The standard solution is based on a circuit that on / off heats with constant power. ThPID is a system in which, by adjusting the voltage at the setpoint temperature, the heating power that is currently needed is selected - minimizing the effect of temperature fluctuations. The ThPID system further allows the heating power of the furnace to be cut to a specified percentage, for example in the absence of power at the moment.The MTS is designed to provide realistic reading of the temperature of the oven. The standard measurement is based on a temperature measurement which is often wrong. MTS is a system of multiple sensors localized in the extreme places of the chamber.

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Cshx Dweuhmacj N Ujrb Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Condition: good (used), Manufacturer: Henny Penny Type: HC-934 Overall size: 460 x 620 x 550 mm. Electrical power: 230 V / 0,8 kW Crehx Dwolyquqo N Usb With three drawers Digital timer Heat modes: Mode A: 74°C Mode B: 85°C

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C ° Crehx Dw Ned Sm Dio Ueb