Conveyor drying oven

VEI-Engineering VEI_DLO_EB 350-720

Condition: good (used), Year of construction: 2003, machine/vehicle number: 4N1028, overall weight: 300 kg, total length: 1,400 mm, total height: 1,520 mm, total width: 780 mm, type of input current: AC, input voltage: 230 V, Equipment: type plate available, SPECTRO LAVMC05A SPECTROLAB spark spectrometer, metal analysis device Input: 230 VAC / 50 Hz Nsdpfsvytalox Afredd Power: 2500 VA

Condition: excellent (used), Year of construction: 2020, READY TO USE IMMEDIATELY! This degreasing system operates under vacuum with modified alcohol. Degreasing of metal components contaminated with oil and chips from machining. Suitable solvents: modified alcohols Class AIII hydrocarbons (flash point > 55°C) Ultrasonic Weber 750W 40kHz Double loading table Double bag filter Lubrication Corrosion protection (spraying) Cartridge filter Very good condition (system has been used very little) 6-month warranty From Service Metalclean AG System processes: spray, immersion, ultrasonic, and vapor degreasing including vacuum drying. Specifications: Basket dimensions: 480 x 320 x 200 mm (h) Ndjdehg Ugispfx Afred Maximum load: 50 kg Average batches per hour: up to 5 System dimensions: 1600 x 1600 x 2400 mm (h) System weight: 2300 kg Connected load: 16 kW Energy consumption: 10 kW/h Solvent volume: approx. 250 liters

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. Nedpfx Asfz U Hvefrsdd It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: refurbished (used), Angelus can seamer model 60L Nedpstq Iukofx Afrsdd

Condition: new, Year of construction: 2018, For sale is an unused Rösler FKS 35 Tandem with soundproof cabin from the year of manufacture 2018. The unit is in its original packaging and is available in our warehouse. You are welcome to arrange an on-site viewing appointment by prior telephone arrangement. Ndjdpfxel D Ex Do Afrod

Condition: excellent (used), 12 x GRP storage container Volume: 65,000 liters Diameter: 3.500 mm length: 7.800 mm Weight: approx. 2.500 kg Final storage medium: vinegar (food) Type: Cylindrical with flat bottom Connections: 1 x manhole oval 1 x residual drain Njdjhzt N Nepfx Afrsdd 1 x discharge connection

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Njdpfsq Ttz Esx Afrsdd

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP Ndodpfx Aeppyhtefrsd dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: new, Cardan shaft balancing machine BVI-03-74 Available in stock in Poland !!! Delivery time: one day!!! . . Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Nodopbv Tfepfx Afrsdd Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: not inspected (used), Pouch making machine for liquids, hot or cold fill. Ideal for packing Soups, Sauces, Condiments (Ketchup, Mustard, Mayonnaise), Salad Dressing, Tomato Based Products (Pizza Sauce, Spaghetti Sauce), Liquid Eggs. Njdpfeig Ht Iex Afrjdd We have two identical machines here from the same sauce factory. Many other machines including kettles, sauce coolers, glycol chillers etc.