Condition: used, Year of construction: 1994, Working width 300 mm Djdpfxszrh Htj Akvskr Number of sanding units 1 st. Weight ca. 450 kg

Condition: excellent (used), CATALOGUE NUMBER 8032 TECHNICAL DATA - max. width of the workpiece: 970mm - max. height of the workpiece: 160mm - 2 units - 1) ribbed rubber roller - 2) two metal rollers + shoe - motor power of unit I and II: 11kW - total power: 12kW - brake * from above: - metal roller, slip - pressure roller - unit - metal roller, slip - pressure roller - unit - metal roller, slip * from below: - rubber roller, slip - conveyor belt - pneumatic belt oscillation - electric table lifting - 2 feed speed settings - feed motor approx. 0.75kW - working pressure: 8-10 bar - diameter of the extraction nozzle: 2x160mm Djdpfx Akoziaxvsvokr - overall dimensions (L/W/H): 1600x1500x2000mm - weight: 1370kg ADVANTAGES - Made in Italy - 2 units - Unpainted - Used sander, very good condition Net price: 21900 PLN Net price: 5200 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller Dsdpfx Akszh H I Isvjkr - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NO. 7773 TECHNICAL DATA - max. working width: 900 mm - max. working height: 160 mm - from above: - metal feed roller I unit – grooved rubber calibration roller II unit – 2x metal calibration rollers + pad - from below: - conveyor belt - pneumatic oscillation of belts - electric table lift - main motor: 15kW/11kW - feed motor: 1.5kW - working pressure: 6–8 bar - extraction port diameter: 2x200 mm - dimensions (LxWxH): 1850x1950x2040 mm - weight: approx. 3000 kg ADVANTAGES - Italian production - calibration sander + pad Dsdszhvcnopfx Akvokr - used sander, very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on 4.2 EUR exchange rate (Prices may vary due to significant fluctuations)

Condition: excellent (used), Catalogue number 7976 TECHNICAL SPECIFICATIONS - Max working width: 1100mm - Max working height: 160mm 2 units: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – From above: - 2 slip metal rollers Djdpfszhvymox Akvjkr - Pressure device - Working unit - 2 slip metal rollers - Working unit - 2 slip metal rollers - Cleaning brush – From below: - 2 slip rubber rollers - Feed belt - Pneumatic belt oscillation with photocells - Electric table lifting - 2 feed speed options - Operating pressure: 8-10bar - Extraction port diameter: 2x200mm - Total power: 30kW - Overall dimensions (L/W/H): 2230x2020x2050mm - Weight: approx. 3000kg ADVANTAGES – German-made – 2 working units – Used sander, in very good condition Net price: 16,900 PLN Net price: 4,000 EUR depending on the 4.2 EUR exchange rate (Prices may change with major fluctuations)

Condition: good (used), Modular unit, finishing unit, grinding unit, grinding station, belt sander, belt sander, edge sander, edge sanding machine, profile grinding unit, small belt sander -Belt sanding unit: from belt sanding machine -Type: unfortunately no type designations Dkedpfxszrfb Uj Akver -Drum motor: Perske type DKAL 2117/2 3.7 kW 2840 rpm -Roller: Ø 183 x 370 mm -Rollers: Ø 117 x 325 mm -Individual components: see photos -Transport dimensions: 1110/560/H300 mm -Weight: 195 kg

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Dkodpfx Akjxy Tmujvor

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: VO995, total length: 1,700 mm, total width: 1,000 mm, total height: 1,150 mm, table length: 880 mm, table width: 370 mm, overall weight: 260 kg, power: 2.2 kW (2.99 HP), grinding width: 150 mm, grinding length: 2,580 mm, Machine type: LVO 120, Machine number: VO995, Year of manufacture: 2009, Main motor: 2.2 kW, Oscillating motor: 0.11 kW Dkjdoy Nznujpfx Akvsr

Condition: used, Year of construction: 2006, functionality: fully functional, Working width: 1350 mm Workpiece thickness: 3 - 160 mm Abrasive belt width: 1370 mm Dkodpsztac Aefx Akvor Abrasive belt length: 2150 mm Drive motors: Unit 1: 15 kW Unit 2: 7.5 kW Total connected load: approx. 28 kW

Condition: good (used), Casolin Wide Belt Sander Sanding width: 1100 mm 1 calibrating unit with a rubber roller 2 platen unit Motor: 15 kW Oscillation Continuously adjustable feed speed Electric table adjustment Table position display Thickness gauge Dkodpfx Akozr Ur Nevjr Good condition, inspected, ready for testing.

Condition: used, Year of construction: 2002, Used Machine Year of Manufacture: 2002 Features and Technical Specifications: - 572 operating hours - Wide-belt automatic calibration and fine-sanding machine - Constant table feed height - Combined unit featuring a contact roller and a grinding shoe unit with an electronically controlled segmented grinding shoe - Contact roller level continuously adjustable according to grit scale - Segmented sanding shoe pneumatically adjustable - Feed table with roller support and electric adjustment via digital display - Working width: 1,100 mm - Working thickness: 3 – 160 mm - Working height: 900 mm - Motor: 11 kW Dedpfx Akszq Hiwjvjkr - Belt drive with rotors - Feed speed: 3–15 m/min, infinitely adjustable via inverter - 2 exhaust ports, Ø=180 mm - Joystick controls - Side door with window - Dimensions: approx. 1,460 x 1,550 x 2,020 mm - Weight: approx. 180 kg Availability: approx. September 2026 Location: Lower Saxony

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592x530 mm Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Dsdpfowzzivex Akvjkr Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Condition: used, Year of construction: 2022, Belt width: 150 mm Belt length: 3000 mm Table size: 960 mm x 350 mm Auxiliary table: 330 mm x 330 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction port: 120 mm Dkedpfozq Dczsx Akvor Motor power: 3 kW Machine length: 1910 mm Machine width: 840 mm Weight: 330 kg

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding shoe and finish sanding Ideal sanding machine for interior design companies, also suitable for intermediate sanding before lacquering. Edge banding machine with a combination unit and electronic articulated pressure bar, with edge segments that can be switched on and off. Segment width of the pressure bar: 35 mm. Contact roller can be pneumatically adjusted, low wear due to a ribbed steel roller. Grain equalization. Drive motor: 7.5 kW with automatic motor brake, stepless belt speed controlled by a frequency inverter from 2 to 18 m/s. Belt feed speed can be steplessly adjusted via a frequency inverter from 2.5 to 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900 mm by adjusting the upper part of the machine, making it also suitable for integration into sanding lines. Feed belt is still in good condition and has good grip. Dedpfx Aszqvmrjkvekr Maximum sanding width: approx. 1340 mm. Workpiece height: approx. 3 to 150 mm. Common sanding belt dimension: 1360 x 1900 mm. 3 rubberized pressure rollers. Infeed roller table and folding outlet table. Preparation for a vacuum blower. The belt is perforated, and a connector for an optional blower is available. Alternatively, the belt can also be connected to the extraction system. Extraction connection: 1 x 200 mm, 1 x 140 mm, and 2 x 100 mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar application points at the front and rear, as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the connection cable shown in the picture. Original paint, only touched up in some places. Approx. 282 operating hours, which is about 20 minutes per week. Dimensions: approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight: approx. 2400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: good (used), Year of construction: 1990, functionality: fully functional, Metal cutting saw with coolant, table with adjustable angle. Saw blade diameter = 250 mm. Dkodezh Hhbopfx Akver

Condition: excellent (used), Vertongen S-320 belt sander Sanding width: 320mm, Djdpfxezr D Tps Akvekr 1 unit (rubber roller) Base 5.5KW motor Two feed speed settings, Manual table adjustment, Oscillation, The sander is fully ready for operation.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, grinding width: 1,360 mm, grinding height: 160 mm, grinding belt speed: 18 mm/s, grinding belt length: 2,150 mm, 1. Unit with rubber contact roller/calibrating roller, motor power 15 kW 2. Unit - combined unit with rubber contact roller and grinding shoe, motor power 11 kW Feed rate 4+8 m/min Grinding height 3 - 160 mm Djdpfxozr D Ero Akvskr Dimensions: approx. 2060x2660x2100 mm (W x D x H) Weight: approx. 3,800 kg The machine will be available from approximately the end of November/beginning of December.

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Storage location: Nattheim Djdpfx Aksvvki Novskr

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Dkodsvvkipepfx Akvor

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Storage location: Nattheim Dodpfxjvvkkaj Akvekr

Condition: used, Year of construction: 2022, Oscillating cylindrical grinding machine from Ecoline. Technical specifications: A possible screw variant for tightening the spindle sleeve. It uses something similar to a ProLoc device. Location: Nattheim. Dkedpfxswhqpro Akver

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine from Ecoline. Technical specifications: A possible screw variant for tightening the spindle sleeve. A device similar to the ProLoc system is used. Dkedswhqplopfx Akvsr Location: Nattheim.

Condition: new, Holzprofi Maker oscillating edge sander, a robust sanding machine for trades and industry: - Processed steel back plate - Graphite support - Table made of solid machine cast iron - Table height adjustable and grooved - 90° pivoting sanding head Djdpfxozqrwge Akvekr - Miter fence and rounding sanding table included as standard Technical data: Belt dimensions: 2260 x 150 mm Motor output S1: 2.2 kW, 400 V Table length: 750 mm Table width: 250 mm Belt speed: 16 m/sec Space requirement: 1325 x 570 mm Dust extraction connection: 100 mm Weight: 156 kg

Condition: excellent (used), Year of construction: 2019, operating hours: 614 h, functionality: fully functional, machine/vehicle number: LB828023A, grinding width: 1,350 mm, power: 46 kW (62.54 HP), COSTA S6 CTT 1350 wide belt sanding machine Professional wide belt sanding machine COSTA S6 CTT 1350, equipped with 3 working units in configuration C25 + T + T. The machine is designed for high-quality calibration and sanding of wood-based panels and similar materials. Main technical data: * Working width: 1350 mm * Sanding belt length: 2620 mm * Working thickness: 3–160 mm * Feed speed: 4–20 m/min * 1st unit: C25 roller unit, 18.5 kW * 2nd unit: sanding pad unit, 11 kW * 3rd unit: superfinishing unit, 11 kW * External cleaning brush: 1.1 kW * Approx. installed motor power: 46 kW * Power supply: 400 V / 50 Hz * Pneumatic pressure: 6 bar * HMI Vision control panel Dedpfxszgbxfj Akvekr * CE compliant Machine suitable for professional woodworking and panel processing applications.

Condition: used, Year of construction: 2006, functionality: unexamined, SANDING LINE COMPOSED OF 3 MACHINES: LOWER WITH TWO PAD BELTS; UPPER WITH TWO PAD BELTS; LATERAL WITH ONE BELT AND TWO EDGE SANDING BELTS. FOR BEAMS UP TO 800x300 mm. INCLUDING INFEED AND OUTFEED ROLLER CONVEYORS. TOTAL POWER 34 kW. Dkedpfjw E Eu Rsx Akvor