Used press brakes with 100-119t bending force for sale (127)

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, control type: CNC control, actuation type: electric, controller manufacturer: Safan, controller model: TS1, bending force (max.): 80 t, working width: 2,550 mm, stroke length: 290 mm, throat depth: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, operating speed: 90 mm/s, table height: 950 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 6,800 kg, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, input voltage: 400 V, warranty duration: 3 months, pressing force: 80 t, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Hfedpfx Aeut S E Njg Djr Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: new, pressure: 60bending length: 1550column width: 1250daylight: 410stroke lenght (max.): 220column throat depth: 400messurements (LxWxH): 2445x2200x2390weight approx.: 4250motor power: 7,5 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK-Industries made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X via the control. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X  Hsdpfxod En R Dj Ag Dofr Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Option: r-Achse                                                                                   ¤ 5.375,-- Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)    ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,00

Condition: used, Year of construction: 1973, pressure 110 t chamfer lenght 3100 mm distance between columns 2600 mm stroke 150 mm dayligth 350 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 7700 kg dimensions of the machine ca. 3550 x 1800 x 2600 mm Equipment: - Electric rear stop (X-axis) - Electric depth adjustment (Y1 + Y2 axis) - 2x front support arms Hedpfxjw A An Ns Ag Djfr - Two-hand operation - Side guard - Tools

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 3,931 h, machine/vehicle number: B0117J0042, control type: CNC control, degree of automation: manual, actuation type: hydraulic, bending force (max.): 225 t, working width: 4,000 mm, stroke length: 402 mm, throat depth: 420 mm, distance between stands: 3,700 mm, installation height: 2,810 mm, number of axes: 4, table height: 950 mm, travel distance X-axis: 860 mm, back gauge adjustment: CNC-controlled, back gauge: 860 mm, overall weight: 15,200 kg, total length: 4,786 mm, total width: 2,268 mm, total height: 2,810 mm, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, finger protection, foot remote control, For sale: TRUMPF TruBend 1225 Press Brake (2023) – like new! For sale is a 4-meter CNC hydraulic press brake TRUMPF TruBend 1225, manufactured in 09/2023. The machine is in excellent condition, lightly used – almost new. Hjdpfxexx Nghe Ag Djfr 🔧 Technical specifications: Model: B42 Pressing force: 2250 kN (225 tons) Stroke: 205 mm Max. pressure: 300 bar Weight: 15,200 kg Power: 30.0 kVA Power supply: 400 V / 50 Hz Control unit: CNC touch panel Year of manufacture: 2023 Operating hours: 3931 Tooling bar length: 4000 mm The machine is being sold only due to upgrade to a press brake with automation. Machine price without tools: €100,000 excl. VAT – negotiable upon inspection. The machine has no damage and is like new – demonstration/testing possible. press brake, sheet metal press, CNC press brake, TruBend 1225, Trumpf, hydraulic press, sheet metal bending, press brake machine, metal forming press, industrial press, TruBend, Trumpf machine

Condition: excellent (used), functionality: fully functional, control type: CNC control, degree of automation: automatic, controller model: modeva, bending force (max.): 110 t, working width: 3,500 mm, stroke length: 500 mm, travel distance X-axis: 1,000 mm, overall weight: 14,000 kg, Equipment: lower tooling, upper tooling, fully equipped press with all possible axles Hfedpfxsxxm Sus Ag Dsr

Condition: used, functionality: fully functional, INDUMAC FOLDING MACHINE 4000 X 100 TON WITH REGISTER USED MACHINE INTERNAL CODE: SVR 290 Hjdpfx Agoxltgxs Defr

Condition: like new (used), functionality: fully functional, Year of construction: 2023, working width: 3,060 mm, throat depth: 1,000 mm, distance between stands: 3,200 mm, operating speed: 75 mm/s, table height: 1,000 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 6,500 kg, total length: 45,000 mm, total width: 18,200 mm, total height: 26,500 mm, warranty duration: 6 months, pressing force: 100 t, Equipment: safety light barrier, SAFANDARLEY E-Brake press brakes have an electric drive. Lenze servomotors controlled by inverters from the same company, allow the system to operate quickly and reliably for many working hours. In addition, the machine consumes electricity only when the slider goes down. The return of the slider is carried out by means of the force resulting from the springs. Also during standstill the machine does not consume electricity electricity because there is no pump in the system as in hydraulic presses. Electricity consumption is estimated at 50% less than in conventional hydraulic presses. SAFANDARLEY servo-electric press brake model E-Brake Pressure 1000 kN (100 tons) Slide stroke 300 mm Opening Q=590 mm Top beam descent speed 75 mm/sec. Upper beam accuracy +/- 0.01 mm Max speed of bumper fingers 350mm/second Max range of bumper fingers (third base point range in X axis) 1000mm Bumper finger range in R axis 150mm Connecting power 11kW Weight 6 350kg Machine width 4,080mm Machine depth 1,775mm Machine height 2 510 mm Power supply 3/N/PE 50Hz - 400/230V Servo-electric drive (without hydraulic system) Transmission by belts CNC-controlled axes Y1-Y2-X-R-Z1-Z2 Hsdpfjr Ndxqjx Ag Defr

Condition: new, pressure: 100bending length: 2500column width: 2100daylight: 365stroke lenght (max.): 180column throat depth: 300messurements (LxWxH): 3760 x 2150 x 2450weight approx.: 6500motor power: 5,5          Standard equipment: KK-Industries GmbHhas the general agency of the KK Kletzer group of companies. We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by KK Kletzer bursa Turkey Model KK Kletzer Europa Compact The strong press brake KK Kletzer Europa Compact  is characterized by its high precision, accuracy and versatile application. KK Kletzer Europa Compact   press brake distinguishes itself by its high precision, accuracy and versatility. We focus on quality, which is also reflected in the control system. As standard control we have the high-quality controls from Italy 10 2 D with simplest programming Furthermore, the press brake KK Kletzer Europa Compact  is equipped with Y1, Y2, X CNC axes via the control. Even with the top tool and the die we make no compromises and equip the CNC press brake KK Kletzer Europa Compact   with quality tools from EUROSTAMP Italy. or Rolleri Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. CNC axes Y1, Y2, X Control 2 D 10 Backgauge with double linear guidance and ball screw centrally adjustable crowning device 2 pcs Aulfagearme front heavy version Height adjustment on linear guide Laser protection device on the upper beam CE protection Hfedped Iy Tvefx Ag Dor options: CNC R-axis     EURO 4.300,- CNC crowning EURO 2.600,- Distributed by: KK-Industries GmbH Tel: 0043 (0)664 380 7776 There's something for everyone!

Condition: used, Year of construction: 1990, pressure 110 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 425 mm throat 300 mm stroke 225 mm working feed 10 mm/sec return speed 100 mm/sec table height 900 mm oil volume 260 l total power requirement 11 kW Hjdpfx Agjuiz I De Dsfr weight of the machine ca. 12000 kg dimensions of the machine ca. 4400 x 1750 x 2500 mm Equipment: - Cybelec DNC 34 PC control system - Controlled backgauge 700 mm (X-axis) - Hydraulic tool clamping at the top - 2 support arms with sliding system - Upper tool - Lower tool - Side + rear safety device - 2 manual foot switches

Condition: used, Year of construction: 2021, Max. pressure 100 ton Hfodpfx Agexr U Nho Djr Max. bending length 3060 mm Distance between uprights 3384 mm X-axis movement 600 mm Length of stroke (extended) 350 mm Daylight (Extended) 580 mm Automatic crowning on lower tool base Controlled axis: Y1, Y2, X1, X2, Z1, Z2, R1 & R2 Control: Trumpf T3500T (3D colour/grafic visualization ) Equipped with: Tool package for 15.000 euro. 2 manual “lay up” arms Trumpf manually quick clamp top tool holders in full width - made by Wila Machine appears as brand new. Price when bought in 2021: Euro. 115.000

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: 0304/5599, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Delem, controller model: DA-65, bending force (max.): 105 t, working width: 3,000 mm, number of axes: 4, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, european tool clamping system, Crowning: Reflex - ACSG1 Priključna moč: 11 kW Tools: Possible with agreement. NEW UPPER TOOL HOLDERS. Hjdpexv Eafsfx Ag Dofr Last service: 05/2025.

Condition: used, functionality: fully functional, BARIOLA PRESS BRAKE Hfodpsxlr Uhofx Ag Dor 3050 X 100 TON ESA CNC 4 AXES MODEL PBI 100/30NCS DISTANCE BETWEEN FRAMES: 2600 mm STROKE: 150 mm WEIGHT: 7000 KG WITH CROWNING TABLE USED MACHINE INTERNAL CODE: SVR 360

Condition: good (used), functionality: fully functional, Year of construction: 1990, Hydraulic press brake Control: Ema 5 Controlled axes: 5 Pressing force: 100 t Max. bending length: 3000 mm Working height: 960 mm Gap: 370 mm Number of cylinders: 2 Hfedexqd U Ropfx Ag Der Oil capacity: 85 l Dimensions LxWxH: 3300 x 1930 x 2325 mm Weight: 6,580 kg

Condition: new, pressure: 100bending length: 3020column width: 2555daylight: 530stroke lenght (max.): 300column throat depth: 450messurements (LxWxH): 3725x2260x2780weight approx.: 85504 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Steuerung Esa S630 (2D Grafik Steuerung)motor power: 11 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus Hfedpfxjd En Rxe Ag Djr on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                           ¤ 4,520.00 ESA 675 W 3D 21'' touch screen control (Windows Base)           ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)        ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)        ¤ 16.350,00 KK Industries GmbH There's something for everyone!

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Gasparini X-PRESS 100 synchronized hydraulic press brake. Excellent condition, refurbished. DELEM DA-66W CNC control. Number of controlled axes: 7. Table crowning compensation. Usable bending length: 3100 mm. Pressing force: 100 tons. PROMECAM H 120 type tool clamping. DSP LASER. Visible under power, fully operational. Hfedpexp E Upefx Ag Djr

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Hedpfxsrfx Uto Ag Defr Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: used, Year of construction: 1990, Technical details: pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2630 mm control for program: CNC-Steuerung CYBELEC max. stroke: ca. 215 mm throat: 255 mm dayligth: 410 mm ajustment speed: 100 mm/sec working feed: 6,5 mm/sec back gauge: 500 motorisch table-size: 3100 x 60 mm work height max.: 890 mm connection voltage: 3x380 V / 50 Hz V total power requirement: 5,5 kW weight of the machine ca.: 7,9 t machine dimensions LxWxH: ca. 3,8 x 1,5 x 2,5 m 500 mm backgauge, width 2570 mm; 2 support frames can be moved manually across the entire width Operation via control panel and/or control stand for two-hand/foot operation Hfedpou Icdaofx Ag Dsr Control also via manual control unit incl. accessories in stock i.D. *

Condition: like new (used), functionality: fully functional, control type: CNC control, LVD BENDER 3000 X 110 CYBELEC CNC 3 AXES Hfedpfx Agsxf H Rqj Dsr MOTORIZED REGISTER USED MACHINE INTERNAL CODE: SVR 249

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 7,484 h, machine/vehicle number: 2962, stroke length: 300 mm, overall weight: 9,230 kg, pressing force: 100 t, pressing speed: 10 mm/s, travel speed (max.): 200 mm/min, working length: 3,100 mm, Press brake Rico PRCN 30100 Serial number: 2962 Year of manufacture: 2021 Commissioned: 2022/01 Operating hours: 7,484 h Warranty: No Hfedoxufwuspfx Ag Dor Control system: Delem DA-66T Technical specifications: Working length: 3,100 mm Pressing force: 100 t Ram stroke: 300 mm Approach speed: 200 mm/s Working speed: 10 mm/s Weight: 9,230 kg Light curtains – rear protection AKAS LC II F (Fiessler) – front safety laser Double manual upper clamping – Promecam Rico crowning table (3,000 mm) – CNC crowning, manual clamping

Condition: new, pressure: 100bending length: 2600column width: 2150daylight: 530stroke lenght (max.): 300column throat depth: 450messurements (LxWxH): 3320x2260x2780weight approx.: 79004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 11 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,529.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)     ¤ 10.165,00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,-- KK Industries GmbH Hfedsd En Ryopfx Ag Dsr There's something for everyone!

Year of construction: 2001, condition: good (used), Used Trumpf V series cnc pressbrake for sale Trumpf v85 2.5m x 85ton – 6axis cnc pressbrake / with Extended daylight and stroke Make: Trumpf Model: v85 Hjdof Txi Sepfx Ag Dsfr Year: 2001 Total axis: 4axis back gauge / total axis 7 – y1 y2 x r z1 z2 and i axis Complete with: • Usb upgrade on the control • Extended stroke and daylight: 365mm maximum stroke / 535mm daylight • 4axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition • Full length of top and bottom tooling – brand new Trumpf pressbrake tooling in stock available for sale Delivery to your works, installation and tuition with your operators available.

Condition: used, Year of construction: 1989, Technical details: pressure: 100 t chamfer lenght: 2600 mm distance between columns: 2300 mm Hodpfx Agsu Icdmo Djfr throat: 300 mm control for program: CNC-Steuerung DNC7000 dayligth: 830 mm max. stroke: 265 mm ajustment speed: 80 - 100 mm/sec back gauge: motorisch table-size: 2700 x 113 mm work height max.: 900 mm connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: 11,3 t machine dimensions LxWxH: ca. 3,2 x 3,8 x 3,0 m 3-point BENDING - mould bending -Hydrocushion (for regular force adjustment over the entire working length) -Backstop: width 2200mm, 2x supports travel 1800mm and 4x stop travel W:2550xL:860mm -Control panel on the boom can be swivelled and/or control stand with two-hand and foot control various press brake tools available i.D. *

Year of construction: 2000, condition: excellent (used), High quality 6axis Edwards Pearson PR4 6axis 4metre cnc pressbrake with integrated hemming table for sale Pr4 150/4100 Make: Edwards Pearson Model: PR4 Pressure Reference Year / new: 2000 Total axis:6 – 4axis back gauge X R Z1 Z2 With hemming table for producing sheet metal flashings or safety edges on sheet metal Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 150ton Cnc control: Cybelec Cnc control Max stroke 215mm Rapid approach 180mm/s Bending cycle 10mm/s Rapid return 150mm/s We can quote for brand new tooling to fit this machine to produce your steel products. Delivery to your factory and installation complete with tuition with your operators can be arranged. Hodpol Tm D Eefx Ag Dofr

Year of construction: 2000, condition: good (used), High quality used Edwards Pearson pr6 7axis cnc pressbrake for sale Video at the bottom of the listing Edwards Pearson PR6 100/3100 CNC Pressbrake 3metre x 100ton / 3100mm Hfedopr U Tdspfx Ag Der New / Year 2000 5 axis back gauge – z1, z2, x, x1 and r axis – 7axis in total – multi axis Taper finger / tapered finger Crowning Cybelec CNC control Machine in good working condition Fully serviced The machine is currently working in production and will be brought into our works to be checked, tested and carry out a cosmetic overhaul. We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, pressing force: 200 t, working range: 4,100 mm, Used Edwards Pearson Pr10 8 axis CNC pressbrake Bystronic EDWARDS PEARSON PR 10 ELITE MODEL CNC PRESS BRAKE Specifications: · 8 axis machine · 6 axis back gauge · Year 1999 · 200 Ton Bending Force · 4,100mm Bending Length Hedpfx Agjwcf Eqs Dofr · Cybelec CNC Control Complete with a large amount of upper and lower tooling