Condition: good (used), WEINIG Unimat 23 four-sided planer max planing width 230mm max planing height 140mm spindles diameter 40mm 8 spindles ( last 2 universal) Spindles fully adjustable up and down; right and left Feed on cardan shafts with smooth adjustment 5 pulling rollers in the tabletop electric height adjustment of rollers Fjln Usiq Dphjx N Iogb sturdy planer, proven in good condition length of the machine 605cm, weight +-5000kg

Condition: good (used), WACO BKW resaw + Weinig Hydromat planing line + 2x Fischer SFV800H with handling and packing equipment. Weinig pack infeed chains. Weinig tilt hoist with stick collector Weinig chain cross feed system feeding to belt conveyor before resaw. Weinig single Belt Panel Conveyor. Waco BKW-Twin resaw (2x 45kW) renovated Weinig resaw Accelerator Weinig turning and separating station after resaw Weinig chain cross feed with flat separator Weinig multi crosscut saw with 3x trimmer saws Weinig cross transfer system after multi crosscut saw with sweeper system to belt conveyor. Weinig EM15 4x feed roller moulder infeed accelerator before moulder Weinig Hydromat 23 moulder (9 spindle) Fjlowaaq Nsn Ux N Iegb Weinig belt conveyor outfeed after moulder feeding to 2x inline preparation lines. Tallybeam reader system. 2x Weinig bundler Units/Conveyors. 2x Mosca SoniXs-MP-6 T Strapping Machines, 2x Fischer SFV800 shrink wrappers (movable with side mounted bypass belt conveyor for when shrink wrapper is not needed) 2x Weinig outfeed conveyors after shrink wrappers Weinig v-belt cross feeder feeding to flat belt cross feeders Weinig layer stacker system (2x Weinig Unistack 400 automatic stackers) with stick magazines Automatic top sheet foil dispenser for pack covering. Weinig automatic pack pneumatic pressure system to squeeze packs Mosca KOF-611 automatic pack strapping machine. Weinig roller conveyors feeding to mini pack stacker system. Weinig chain cnveyors to dispatch. Siemens Simatic Driven PLC. Available immediately.

Condition: new, Feeder, roller speed on the inverter. New and unused. Fgeln Uxov U Rups N Isb

Year of construction: 1992, Condition: excellent (used), Max working width 400mm 4 knife shaft The length of the tops is 2500mm 3kW engine Fslohzx Eron Ux N Iegb Power supply 400V Cast iron

Condition: ready for operation (used), Year of construction: 1992, Functionality: fully functional, working width: 220 mm, planing height: 120 mm, planing width: 220 mm, working height: 120 mm, total width: 1,400 mm, total height: 1,350 mm, total length: 3,100 mm, overall weight: 1,210 kg, power of feed motor: 1,500 W, rotational speed (min.): 6,000 rpm, height adjustment type: electric, Four-sided planer CASADEI C4 profiler Specification: • condition - used, after inspection, ready to work • manufacturer - CASADEI • model - C4 • working width - 220 mm • working height - 120 mm • motors on vertical spindles - 2 x 4.0 kW • motors on horizontal spindles - 2 x 4.0 kW • feed motor - 1.5 kW • total power 17.5 kW • electric adjustment of planing height • manual adjustment of planing width • 4 spindles equipped with spiral heads Fgslov U Nrysn Ux N Isb • vertical profiling heads, adjustable up/down (like in a low spindle milling machine) • pulling roller before the first head • long insert table with dimensions 24 x 247 cm • 2 feed speeds (6 and 12 m/min) • feed on cardan shafts • roller pressure on springs • pump for lubricating the table • extraction nozzles fi 120 and 140 mm • soundproofed soundproofing cabin • weight - 1210 kg • year of production - 1992 • manufacturer's documentation in Italian • dimensions 310 x 140 x 135 cm (length x width x height)

Condition: ready for operation (used), Functionality: fully functional, Planer - Wood width 50 - 420 mm - Wood thickness 2-sided 300 mm - Wood thickness 4-sided 300 mm - Feed speed 5 - 30 m/min - Feed motor 22 kW Spindle arrangement Fgeln Ux Nov Dr Tfs Ijb 1. Horizontal spindle below, 15.0 kW motor, hydroplaning head 200x430 Z6, steel 2. Horizontal spindle above, 18.5 kW motor, hydroplaning head 200x430 Z6, steel 3. Vertical spindle right, 18.5 kW motor, planing head 160x300 /4, aluminum 4. Vertical spindle left, 18.5 kW motor, planing head 160x300 /4, aluminum 5. Chamfering units above, 2 x 2.2 kW - Upper section with 6 lifting columns - Vertical spindles with counter bearings - Extraction unit Powered by two upper steel rollers - Positioning control for wood thickness and width >>Very robust planer

Condition: used, Year of construction: 2001, machine/vehicle number: 01171, max. Arbeitsbreite : 180 mm max. Arbeitshöhe : 120 mm Fgsln Uxjv U Hauo N Iob Spindelanzahl : 4 Stk 1. Spindel : unten Spindeldurchmesser: 125 mm Drehzahl: 6000U/min Motorstärke: 4PS 2. Spindel : rechts Spindeldurchmesser: 125 mm Drehzahl: 6000 U/min Motorstärke: 4 PS 3. Spindel : links Spindeldurchmesser: 125mm Drehzahl: 6000 U/min Motorstärke: 4 PS 4. Spindel : oben Spindeldurchmesser: 125 mm Drehzahl: 6000 U/min Motorstärke: 5 PS Motorbremsen : Ja Hoch- Tiefverstellung der oberen Spindel : elektrisch Vorschubgeschwindigkeit : 7/14 m/min Werkzeuge : mit dabei Gewicht ca. : 1000 kg

Condition: good (used), WACO BKW resaw + Weinig Hydromat planing line + 2x Fischer SFV800H with handling and packing equipment. Weinig pack infeed chains. Weinig tilt hoist with stick collector Fjln Ux Nowaaqpj Iegb Weinig chain cross feed system feeding to belt conveyor before resaw. Weinig single Belt Panel Conveyor. Waco BKW-Twin resaw (2x 45kW) renovated Weinig resaw Accelerator Weinig turning and separating station after resaw Weinig chain cross feed with flat separator Weinig multi crosscut saw with 3x trimmer saws Weinig cross transfer system after multi crosscut saw with sweeper system to belt conveyor. Weinig EM15 4x feed roller moulder infeed accelerator before moulder Weinig Hydromat 23 moulder (9 spindle) Weinig belt conveyor outfeed after moulder feeding to 2x inline preparation lines. Tallybeam reader system. 2x Weinig bundler Units/Conveyors. 2x Mosca SoniXs-MP-6 T Strapping Machines, 2x Fischer SFV800 shrink wrappers (movable with side mounted bypass belt conveyor for when shrink wrapper is not needed) 2x Weinig outfeed conveyors after shrink wrappers Weinig v-belt cross feeder feeding to flat belt cross feeders Weinig layer stacker system (2x Weinig Unistack 400 automatic stackers) with stick magazines Automatic top sheet foil dispenser for pack covering. Weinig automatic pack pneumatic pressure system to squeeze packs Mosca KOF-611 automatic pack strapping machine. Weinig roller conveyors feeding to mini pack stacker system. Weinig chain cnveyors to dispatch. Siemens Simatic Driven PLC. Available immediately.

Condition: good (used), Year of construction: 1997, Functionality: fully functional, Equipment: cabin, 7 Spindle Scm Moulder: Max Working width 230mm Max Working height 160mm Feed Speed 5-40 M/min Diameter of spindles Ø40mm Spindle configuration: 1 Bottom 5.5 Kw 2 Right 5.5 Kw 3 Left 5.5 Kw 4 Top 5.5 Kw 5 Bottom 5.5 Kw 6 Top 5.5 Kw 7 Saws/ Bottom 22 Kw Fjln Ux Njtp Dfme Iogb Machine comes with some parts and tools incl 4 New 6 knife spindles Ø163x240xØ40 + One full set of tools on the machine.

Condition: used, Functionality: fully functional, working width: 220 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 140 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 7, frequency: 50 Hz, Weinig Unimat 23 7 spindles, Fslnov U Agqs Ux N Ijgb Working width: 220 mm, Working height: 140 mm, Spindle diameter: 40 mm, Feed rate: 5.5 kW / 6 – 43 m/min, Spindle arrangement: 1 – Bottom with hydraulic clamping and straight jointer, diameter 50 mm 2 – Right, diameter 40 mm 3 – Left, diameter 40 mm 4 – Right, diameter 40 mm 5 – Top – with hydraulic clamping, straight jointer, diameter 50 mm 6 – Bottom – with hydraulic clamping, diameter 50 mm 7 – Bottom – with hydraulic clamping, straight jointer, diameter 50 mm 3 driven rollers in the table

Condition: good (used), Hofmann planer planing width 400mm table length 268cm 4 Tersa knives 4KW, 380V motor Fgjln Uxsv Uw Rdj N Ijb both tables adjustable feed table adjustable up and down and for concave-convex machine in very good condition

Condition: used, Year of construction: 1993, spindle diameter: 40 mm, planing width: 187 mm, working height: 112 mm, 4-sided planer gone due to purchase of new planer. Very good machine, is still used daily. Fgjln Uxov Uwluo N Iob

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, MARTIN T 42 Thickness Planer It is visually and technically in very good condition. The machine comes from a small assembly company and has been used very little. Everything works perfectly. With kickback protection. The planer block has a locking mechanism for changing the planer knives. The chips can be easily removed thanks to the closed system. Fjln Uov Urq Sjx N Ijgb With a 4-knife block for standard planer knives. You will receive a setting gauge. The thicknessing table is mounted on 4 sturdy trapezoidal spindles, preventing tipping and twisting. With a protective cover that can be folded upwards. Max. planing width 630 mm, max. planing height 250 mm. The machine meets all requirements of the German Wood Industry Association (Holz-BG) and has the GS test seal. We will personally deliver and demonstrate the machine throughout Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible upon request. The machine is quiet according to DIN 45635. With very good noise levels. Effective rubber infeed and outfeed rollers, both new. The feed speed is continuously adjustable from 8-20 m/min. With a 160 mm suction nozzle. The height of the thicknessing table is adjusted via a handwheel. The handwheel features a counter that allows the planing thickness to be read very precisely. The contact pressure of the outfeed pressure bar can be adjusted using a rocker lever. With this machine, you can achieve a very clean planing finish. Thanks to the powerful 5500 watt motor, there are almost no signs of fatigue. The machine is largely made of gray cast iron. The machine contains four sharpened knives. Very robust and durable design, excellent workmanship with the highest quality. The machine is ready for immediate use. 380V, 5500W 5000 rpm Year of manufacture: 1983 Weight: approx. 1050 kg Optimal, simple, fast, and safe handling.

Condition: good (used), WACO BKW resaw + Weinig Hydromat planing line + 2x Fischer SFV800H with handling and packing equipment. Weinig pack infeed chains. Weinig tilt hoist with stick collector Weinig chain cross feed system feeding to belt conveyor before resaw. Weinig single Belt Panel Conveyor. Waco BKW-Twin resaw (2x 45kW) renovated Weinig resaw Accelerator Weinig turning and separating station after resaw Weinig chain cross feed with flat separator Weinig multi crosscut saw with 3x trimmer saws Weinig cross transfer system after multi crosscut saw with sweeper system to belt conveyor. Weinig EM15 4x feed roller moulder infeed accelerator before moulder Fgjln Uewaapfsx N Iob Weinig Hydromat 23 moulder (9 spindle) Weinig belt conveyor outfeed after moulder feeding to 2x inline preparation lines. Tallybeam reader system. 2x Weinig bundler Units/Conveyors. 2x Mosca SoniXs-MP-6 T Strapping Machines, 2x Fischer SFV800 shrink wrappers (movable with side mounted bypass belt conveyor for when shrink wrapper is not needed) 2x Weinig outfeed conveyors after shrink wrappers Weinig v-belt cross feeder feeding to flat belt cross feeders Weinig layer stacker system (2x Weinig Unistack 400 automatic stackers) with stick magazines Automatic top sheet foil dispenser for pack covering. Weinig automatic pack pneumatic pressure system to squeeze packs Mosca KOF-611 automatic pack strapping machine. Weinig roller conveyors feeding to mini pack stacker system. Weinig chain cnveyors to dispatch. Siemens Simatic Driven PLC. Available immediately.

Condition: reconditioned (used), Year of construction: 1985, Functionality: fully functional, Power rating 380V Planer block motor 4kW 8.3A Feed motor 1x0.37kW 1x0.55kW 2x feed speeds 7 + 14 m/min Star-delta switch Planing thickness adjustable with hand crank Planing width 510 mm Leitz reversible cutter block with 2 knives Fgolov Up R Aon Ux N Iob 2 table rollers Extraction connection 140 mm

Condition: excellent (used), Four-sided planer SCM Compact 22 Working width 220mm Working height 120mm Number of spindles 4 Spindle arrangement: Folnev Rdbno Ux N Isgb 1. Bottom 4kw 2. Right 3. Left 5.5kw 4. Top 4kw Mobile spindle Pneumatic material clamps Feed speed regulated by means of a variator 4-22m/min

Condition: good (used), Felder planer thicknesser spiral shaft Foln Uxov Unf Es N Iogb 2 thicknesser feed speeds thicknesser processing height 240mm planer: length of tops 220cm planing width 41cm 4KW, 380V motor machine functional and ready to work

Condition: used, Weinig Unimat 23E planer and moulder for four-sided planing and profiling of wood, with a mobile spindle for automatic adjustment and a grooved bed (optionally without grooved bed) for short and curved workpieces, as well as a long planing table. Included: Set of grooved bed cutters Optional: Conversion to a conventional smooth table, available upon request. spindles: 5 spindle 1: Bottom / 40 mm spindle 2: Right / 40 mm spindle 3: Left / 40 mm spindle 4: Top / 40 mm Fsln Uxev Rb Ais N Iegb spindle 5: Bottom / 40 mm working width: 230 mm working height: 160 mm

Condition: as good as new (ex-display), Year of construction: 2022, Working width: 310 mm Planer block: Tersa knives Number of knives: 3 Planer table length: 1320 mm Planer stop angle adjustable: yes, 45° to 90° Maximum thickness throughput of thicknesser: 230 mm Thicknesser table height adjustment: handwheel Planer thickness display: mechanical counter Feed speed: 6 m/min Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 3.7 kW Motor brake: yes, automatic Extraction connection: 100 mm Machine length: 1400 mm Machine width: 750 mm Foln Uegzln Aox N Isgb Weight: 270 kg

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Fgsln Usv Uwmxsx N Ieb Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor Automatic lubrication system. Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed

Condition: excellent (used), Weinig Unimat 23E Four-sided Planer Working width 230mm Working height 150mm Number of spindles 6 Spindle arrangement: 1. Bottom 5.5kw Fgeln Ux Nev Ralio Ieb 2. Left 4kw 3. Right 4kw 4. Top 7.5kw 5. Bottom 4kw 6. Top 4kw Feed speed regulated by means of a variator 6-36m/min Feed driven by a cardan shaft Pneumatic clamps Total power 34kw

Condition: used, Flat magazine or cross-feed conveyor Weinig type EM12 for continuous feeding of planing machines or similar machines. Fgslnsvy Af Rs Ux N Ieb workpiece width: 20 to 230 mm workpiece length: 650 to 3,000 mm table size: approx. 2,300 x 900 mm feed: up to 25 m/min

Condition: new, Year of construction: 2022, Working width: 410 mm Planer block: Tersa knives Number of knives: 4 Planer table length: 2000 mm Planer stop angle adjustable: yes, 45° to 90° Maximum thickness throughput of thicknesser: 230 mm Thicknesser table height adjustment: handwheel Planer thickness display: mechanical counter Fgjlnohpl Sps Ux N Iob Feed speed: 6 / 12 m/min Feed roller: steel Extraction roller: steel Pressure beam: yes Table rollers: no Motor power: 5 kW Motor brake: yes, automatic Extraction connection: 120 mm Machine length: 2000 mm Machine width: 750 mm Weight: 430 kg

Condition: excellent (used), Year of construction: 2010, Weinig Powermat 500 (6 spindle + Universal) CNC position adjustment. 4798 work hours Machine number 114015 (2010) 160mm x 230mm. All 7 spindles Powerlock, 8,000 RPM Bottom 7.5 kW Fjln Uxev Uwmre N Iogb Right 11 kW Left 11 kW Top 15 kW Top 15 kW Bottom 7.5 kW Universal 7.5 kW 5,2kW feed motor 30m/min feed speed. 2m infeeed table. CNC positioning on spindles 2,3, 4, 5, and 7. 3 way CNC positioning on the universal spindle. Powercom Plus. Possible to supply with automatic infeed and outfeed if needed. Possible to supply with complete handling solution with stacker if needed.

Condition: new, Year of construction: 2022, Working width: 410 mm Planing shaft: Tersa Number of knives: 4 Dressing table length: 2000 mm Dressing fence angle adjustable: yes 45° to 90 maximum passage thickness thickness planer: 250 mm height adjustment thicknessing table: electric display of planing thickness: mechanical digital display Feeding speed: 6 m/min Feed roller: steel Extraction roller: steel table rollers: no Engine power: 4.5 kW Motor brake: yes, automatic Suction connection: 120mm Machine length: 2000 mm Fgsln Uxjgqwxuo N Ijb Machine width: 882 mm Weight: 615kg