Planer and thicknessing machine

Robland SD410 - Tersa

Condition: new, Year of construction: 2025, Working width: 410 mm Planing shaft: Tersa Number of knives: 4 Planer table length: 2000 mm Dressing fence angle adjustable: yes 45° to 90 Maximum passage thickness of thickness planer: 250 mm Height adjustment of thicknessing table: electric Csdsl D Rwtepfx Akcegt Planer thickness display: digital display Feed speed: 6/12 m/min Infeed roller: Steel Pull-out roller: steel Table rollers: no Motor power: 4.5 kW Motor brake: yes, automatic Suction connection: 120mm Machine length: 2000 mm Machine width: 882 mm weight: 615 kg

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Cjdoxvh E Rspfx Akcogt Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Codpfx Akecqvhwscjgt Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: From stock 54634 Bitburg - available immediately -

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Cgjdsb Auu Ropfx Akcot Engine power: 0,75 KW Voltage: 230 Volt 5 amps, 50 Hz, Machine no.: 4/14242 Dust bag Location: Ex warehouse Bitburg

Condition: new, Year of construction: 2025, CASADEI PFS 520 - Surface planer with 520 mm planing width and motorized thicknessing table adjustment Sturdy cast iron construction Large, ribbed planing tables made of grey cast iron, annealed against distortion Smooth running due to high dead weight Four feed speeds Motorized thicknessing table stroke with two speeds and digital display Link pressure shoes in the infeed 4-blade shaft, precision bearing mounted Sharp toothed steel feed roller for particularly even and gentle wood feed Extraction roller with rubber coating Large dressing fence, inclinable 90°- 45° readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa planing cutter Change of planing knives in seconds When starting the machine, the planing knives are automatically clamped by the centrifugal force - self-locking The knife protrusion adjusts automatically without adjustment and screwing The planing table is adjusted by a stable and precisely guided parallelogram system, so that the distance of the table tips to the cutter head remains the same in every adjustment position. Cgsdjbxz S Hopfx Akcot The sturdy aluminium dressing fence is anodised as standard, easily adjustable and offers a large contact surface. The adjustable inclination from 90° to 45° is easy to read from the workstation. Standard with auxiliary fence for safe planing even of narrow workpieces Fig. with optional equipment The connection position of the suction i

Condition: used, machine/vehicle number: 007687, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Cgsdpfx Akjwuz Npjcst Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements Cgedjhlp D Nopfx Akcot - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Year of construction: 2017, condition: refurbished (used), ROLLER CARRIAGE 3-sided CHIMNEY WOOD 155 cm 1 ROLL CARRIAGE 810 x 720 mm height approx. 155 cm Item no. RW-3155 / 3-sided other models for comparison only we produce SPECIFIC heights , repair roll containers / roll carts. Ask for specific heights Side rails in color blue, back wall blue, rolling shelves in different colors ideal for use as: firewood trolley; yellow bags; standard boxes such as E2 boxes, etc. with the dimensions 60 x 40 cm; transport trolley, magazine trolley; storage rack; etc. per rolling container: Roll shelf with 4 wheels of which 2x rigid and 2x steerable; rolling floor / rolling plate in different colors; 2 side rails 100% in order + back wall incl. 4 pcs. connecting clamps & screw material weight: approx. 27 kg/ roll cart Offer consists only of the rolling container with height 155 cm. Other trolleys do not belong to the offer (as an idea) Price per piece 69,00 € plus the currently valid VAT Price is per piece for purchase of 1 x rolling container Inspection after telephone arrangement possible article is optically and technically good (generally overhauled) extremely stable & loadable up to 500 kg PICKUP after notification ex STORE 47441 MOERS possible (due to high stocks, goods can be evaluated on site) Questions to this article can be answered for time reasons only with indication of your telephone number if you wish a dispatch - please announce before the purchase Cgodpfx Aksd Syhgjcjt and discuss shipping costs Photos similar

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Machine width: Weight: Cgsdpfxeug Ty Ho Akcjt

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW Cedpfeh Nvyzjx Akcogt -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg