Used Mandrel tube bending machines for sale (37)

Condition: refurbished (used), Year of construction: 2003, operating hours: 24,000 h, Functionality: limited functionality, bending radius: 300 mm, bending angle: 183 °, wall thickness: 8 mm, pipe diameter: 100 mm, pipe length: 4,100 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Cebvn Tbjtrd T Tekjgt Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: good (used), Year of construction: 1995, - Hydraulic cylinder and roller chain drive - Tube range 4-28 mm - Bending angle 190° (without tube) Cebvn Tbjwhdxmokegt - Bending radius 1.5 x D - 2.0 x D - Nominal pressure 250 bar - Operating pressure: 3005 mm n.r. - Delivery rate 4.5 l/min

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm Cobvn Tbevtgn Nskegt wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2007, tube diameter 6.0 - 50.0 mm wall strength max. 4.0 mm ST bending angle max. +/- 180 ° bending radius min. 1.5 x D mm bending radius max. 10.0 - 140 mm Control JUTEC SPS voltage 400 V total power requirement 6.5 kW Cebvov Nq R Hen Tbkjgt weight of the machine ca. ca. 650 kg dimensions of the machine ca. 3650 x 1000 x 1150 mm Good / well-maintained condition (!!) Description / Area of ??application: - Hydraulic piping / pipeline construction / plant engineering / metal construction / prototype construction - Mandrel bending machine for pipes 6.0 - 50.0 mm - Max. wall thickness 4.0 mm - e.g. hydraulic piping .. max. 42.0 x 3.0 mm Equipment: - Electro-hydraulic mandrel tube bending machine (SEMI-AUTOMATIC) - Including JUTEC NC-PLC control unit * Movable control panel * Data storage for up to 200 programs * For bending angle + length measurement and twist angle * Up to 30 bending sequences programmable for one pipe length * A database is available for monitoring springback values. * Available for various materials - Pipe length/usable length .. 3000 mm - Clockwise bending direction - With mechanical clamping device - Automatically clamps during the bending process - Standard cylinder - Standard hydraulic components - Movable machine (mobile base frame) - Feed carriage including 4-jaw chuck - Many JUTEC bending tools including mandrel bars - 1x freely movable 3-position foot control - Operating instructions (PDF) Bending segments: D 41 mm . R 123 mm D 35 mm . R 115 mm D 29 mm . R 60 mm D 23 mm . R 50 mm D 19 mm . R 40 mm D 13 mm . R 40 mm D 10 mm . R 40 mm

Condition: new, Year of construction: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room Csbvn Tonh R Susbkjgt - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: used, Year of construction: 2012, tube diameter 51 mm wall strength 3 mm semi-automatic operated UZMA bending radius max. 225 mm bending angle max. 190 ° bending speed 35 ° / sec. mandrel length 3.100 mm engine output 5,5 kW voltage 380 V total power requirement 11,0 kW weight of the machine ca. 1,36 t dimensions of the machine ca. 4,20 x 1,60 x 1,20 m - Serial No.: 0144 - semi-automatic mandrel bending machine - bending angle is program controlled - length + twisting angle manually adjustable - digital display for twisting angle, length and bending angle - the following bending sets are included: 1.) R75 mm / Ø 20 mm 2.) R60 mm / Ø 25 mm 3.) R75 mm / Ø 30 mm Cobjpungljvn Tbkjgt 4.) R75 mm / Ø 40 mm 5.) R170 mm / Ø 50 mm 6.) R35 / flat Material 40 x 10 mm

Condition: new, "Properties: Bending radii: R36 to R190 (min. R= 2xD) Max. Bending speed: 2.8 rpm Cjbvsuudi Aen Tbkogt Control: digital Number of programs: 1 Dimensions (W x H x D): 245 x 300 x 320 mm Weight: 23 kg Portable Power: Hard copper and aluminum : 42 x 1.5 mm Steel tube : 38 x 1.5 mm Stainless steel : 35 x 1.5 mm Solid material : 20 mm Scope of delivery MD070M Standard accessories (e.g. foot switch, operating instructions)"

Condition: used, Year of construction: 1990, Technical details: Cebvneu Ibvus Tbksgt tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: used, Year of construction: 1991, tube diameter 6 - 18 mm Cgobev T Nq Hevn Tbkst 180 ° 1500 mm weight of the machine ca. 0,55 t dimensions of the machine ca. 1,6 x 0,8 x 1,2 m

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, Manual length and angle positioner for 6000 mm pipe length Cgjbev Tz S Ajvn Tbket The bending capacity can be found in the attached technical documentation in PDF format.

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: Cobvsnfvy Uen Tbkegt - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2024, tube diameter 60 mm wall strength 3 mm bending radius min. bei 2,5 Wandst. 170 mm arbor length 3000 mm total power requirement 5,5 kW range L-W-H 3,8 x 1,3 x 1,35 mm The ETM-H range of semi-automatic hybrid tube bender is ideal for the machining of thin tubes without deformation of the processed tube: a compact, high- performance and economical solution. In semi -automatic bending machines of the ETM-H series, the bending function isperformed automatically, while the feeding and rotation of the tube between the curves must be performed manually. Simplicity, sturdiness and precision are the key features of this particularly cost-effective line. These bending machines are particularly used for the production of medium-small sized batches, for adaptation and maintenance work or as mobile bending machines on site. When machining tubes with multiple curves, the manual positioner will greatly facilitate the work, as this device allows the exact fixing of the length of the tube and the rotationposition between the curves. As standard supply, this electric bending machine is equipped with a hydraulic mandrel extractor, hydraulic clamp die and pressure die, thus ensuring an excellent quality bendfinish. Our ETM-H semiautomatic hybrid bending machines can bend tubes with a diameter up to 90 mm diameter with maximum quality of finishing. Other machines in sizes: 50, 80 and 90 mm. GENERAL FEATURES - Electronic Control “Digital Bend Program Plus” - Carbon steel frame - Adjustable pressure dies - Programmable advance mandrel extraction for optimized bending quality - Interchangeable shaft for small bending radii - Variable bending speed - Positioner for tube length and rotation, incl. 3-jaw spindle (optional) - Available pipe lengths: 1.5; 2.5; 4.5; 6 m. Cjbvnevfhilj Tbksgt - Counter pressure die with automatic return - Mandrel lubrication system (optional) - Length and rotation measuring system with digital display. Bending tools for different pipe diameters on request.

Condition: new, "Bend speed: programmable for every bending anglevariably up to 1 rpm Control: 7“ and 4,3” touch-screen with oicons Number of programs: unlimited by USB interface LAN or W-LAN connection (optional) Right/left bending (with special tool) possible Depending on machine type: Cebvsuudg Ijn Tbkogt Dimensions, weight, bending radius and bending capacity"

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Cgjbvou Ibyysn Tbket Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. The bending machine is movable/adjustable. Equipment/accessories: 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

Condition: used, Year of construction: 2001, operating hours: 100 h, Functionality: fully functional, thorn length: 4,500 mm, total width: 1,500 mm, total length: 6,000 mm, total height: 1,500 mm, overall weight: 3,500 kg, pipe diameter: 80 mm, Fully automatic pipe bending machine for D80x4 mm steel pipes. Very few operating hours. Control in any language. Runs perfectly. Tools for D50+D60 mm available. Cgjbvov E R S Njn Tbkst

Condition: used, Year of construction: 1999, Hydraulic mandrel bending machine Cebjvxt I Tjvn Tbksgt Max. usable length: 4500 mm For pipe diameters 6-50 mm With automatic control No tools available Weight: approx. 1200 kg

Condition: good (used), Mandrel pipe bending machine, LANG type EL 45 Technical data: for pipe diameter 45 x 2 mm Mandrel holder length 2,000 mm Bending speed for 90° approx. 3 s Electrical connection 380 V, 2.2 kW Weight approx. 1000 kg with tool: 16 x R 76 22 x R 76 28 x R 75 35 x R 105 Csbvjqff E Esn Tbkogt

Condition: ready for operation (used), Year of construction: 1990, Functionality: fully functional, wall thickness: 25 mm, overall weight: 2,800 kg, pipe diameter: 42 mm, controller model: RC 7000, TECHNICAL DETAILS Area of application: Processing of deformable pipes, rectangular pipes, round bars and square pipes. Pipe diameter: 42 mm Wall thickness: 2.5 mm Round steel (max.): Ø 20 mm Square material (pipe): 25 x 25 mm Rectangular pipe: 42 x 20 x 2.5 mm Bending performance Max. bending radius (inside): Ø 20 mm Max. bending radius (outside): Ø 170 mm Bending speed: not specified Bending direction: to the left Pipe lifting length: 3,000 mm Control Software: RC 7000 Programming: Manual Operation: via control panel MACHINE DETAILS Machine weight: approx. 2.8 t Machine dimensions (L x W x H): 5.1 x 0.7 x 2.0 m Control cabinet dimensions (W x D x H): 800 x 700 x 2,000 mm Cgjbjvyib Sovn Tbkot EQUIPMENT - Various bending tools for pipe Ø 25 mm - 12 different collets - Various auxiliary and clamping devices

Condition: new, "Properties: Bending radii: R10 to R200 (min. R= 1.8xD) (depending on the wall thickness, the material and the pipe diameter) Max. Bending speed: 2 rpm and 3.2 rpm without inverter Operation: NC soft-touch control panel in 8 different languages and foot pedal Number of programs: 30 per 9 bends Control: NC1 Bending direction: counterclockwise Effective length (available in different lengths as required): 1,5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3 m version) Weight: approx. 600 kg (with 3m mandrel) Cebvn Tsuudrksbksgt NOTE: The price quoted refers to a length of 1.5 m. Other lengths available on request! Premature mandrel retraction Positioning and rotation with mechanical stops and precise digital display Pneumatic four-jaw chuck Performance: Hard copper and aluminum : 60 x 4 mm Steel tube : 60 x 3 mm Stainless steel : 60 x 2 mm Scope of delivery: Machine Standard accessories (e.g. foot switch, operating instructions, 2 hex, 4 sets of chuck jaws, bending grease, 25 mm mandrel bar) Delivery without hydraulic oil"

Condition: new, Year of construction: 2023, mandrel bending machine ZB 55 H - mandrel length 2000 mm - pipe bender for tubes and profiles up to 54 mm - solid construction for heavy using standard equipment: - modern electromecanic movement - SPS control unit - up to 1000 different programs - electronic measurement of length and angle - manual stop system - hydraulic tube clamping - adjustable hydraulic pressure - three jaw chuck - total power 5,2 KW - bending speed 28 degrees per second - min. bending radius 50 mm, max. bending radius 150 mm - minimum tube diameter 15 mm Cobvn Ted H Rhiebkjgt - 400 Volt 50 Hz 3 ph. - weight 900 kg HS-Code: 8462 2998

Condition: new, Capacity, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radius difference ----- 50/230 Bending speed/repeatability ----- 230º/s. ±0.05 Length of mandrel ----- 1 000-∞ Weight ----- 5000kg Machine dimensions ----- 3.0 x 1.6 x 1.5 Tube rotation ----- 0-360°/sec Length feeding ----- 0-1800 mm/sec Degree of tolerance ----- 0,05°/mm Standard components conform to VDMA, ISO and DIN standards OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with free programmable robot or loading arm * Weld seam detector and tube positioner electromagnetic or optic detection * Free radius bending * Simulation/Collision Control * Bed length extension Cobega T E Aevn Tbkogt

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 5 h, Functionality: fully functional, For sele is basically a new bending machine for pipe bending. Included are tools for 35x35x3mm pipe and 8x8mm. Other tools can be ordered from the manufacturer. Machine is like new. Cgjbvn Tbsvn Umcoket Specifications are in the pictures.

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Cgobendn Agevn Tbkot Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Capacity, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s. ±0.05 Tube length ----- 1 350 ∞ mm Weight ----- 2200 kg Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0-850°/sec Length feeding ----- Standard 0-2 400 mm/sec Booster ----- 0-1 200 mm/sec Degree of tolerance ----- 0,05°/mm Bending head rotation ----- 0,75 sec Standard components conform to VDMA, ISO and DIN standards. OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with free programmable robot or loading arm arm * Weld seam detector and tube positioner electromagnetic or optic detection Cgobvn Tega T Exsbkot * Free radius bending * Simulation/Collision Control * Bed length extension

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Cgsbvn Tbsng Exaekot Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site