Used Mandrel tube bending machines for sale (37)

Condition: used, Semi-automatic bending machine, tube bending machine, mandrel bending machine MOBITEC Type BAH 1-2 KOTTMANN and BERGER GmbH make no. 056 year of construction 09/2004 - for simultaneous bending of two steel pipe sections up to Ø 12 mm bending angle max 90 tube diameter max 12mm Ceb Epopu R Nve Sxvegt mandrel length approx. 65 mm nominal power 3,5 kW Compressed air max. 6 bar / approx. 1 liter per bending cycle Mains connection 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STÖBER control box series 4000/5000 - Control SIEMENS S7-200 with display TD200 - Machine without bending tools and without tool bearing bolts 25 x 183 mm - only 1 bending mandrel available (see pictures). space requirement L x W x H 1000 x 1000 x 1500 mm weight 390 kg good condition

Condition: used, Ring bending machine, profile bending machine, bending machine, pipe bending tool, tube bender, tube bending machine, mandrel bending machine -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos Cgsb Ep Sjh S Ti Esxvst -Total dimensions: 1200/740/H1220 mm -Weight: 169 kg

Condition: used, Year of construction: 1997, tube diameter 60 mm wall strength 6 mm bending radius min. 180 ° Cob Ep Sxjt I D Uxjvjgt total power requirement 5,5 kW weight of the machine ca. 1300 kg dimensions of the machine ca. 3500 x 1250 x 1300 mm Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Year of construction: 1996, Condition: used, Hydraulic mandrel bending machine with lots of accessories Preselection of 8 different bending angles with digital display Digital length display and digital display of twist Max. usable length: 6096 mm Round steel tube (S 235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Cgsb Eeq Daxtjp Sxvst Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm Max. bending angle: 180° Weight: approx. 1800 kg

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 514, thorn length: 6,000 mm, bending radius: 200 mm, bending angle: 190 °, wall thickness: 5 mm, type of input current: three-phase, total width: 900 mm, total length: 8,000 mm, total height: 1,200 mm, overall weight: 2,000 kg, pipe diameter: 50 mm, input voltage: 400 V, pipe length: 6,000 mm, power: 7.5 kW (10.20 HP), Beautiful CNC tube bending machine. Hardly used in recent years. Will be delivered serviced. Large selection of bending tools. Csb Ep Sxjtuqfrevsgt

Condition: good (used), Year of construction: 1998, Functionality: fully functional, thorn length: 1,200 mm, bending radius: 600 mm, wall thickness: 8 mm, Transfluid DB 40100ST Mandrel bending machine Tube bending machine The above machine is a mandrel bending machine designed exclusively for the production of tubes and profiles with an outer diameter of 40-100 mm, max. 110x5 mm with a max. wall thickness of 8 mm or for the processing of solid materials with an outer diameter of up to 70 mm. Pipe push-on length/usable length: 1200 mm Radius range max:600 mm Bending height:1200 mm Machine data Length:4000 mm Width:2600 mm Cjb Ep Ser H Havoxvjgt Height:1400 mm Weight:9000 kg

Condition: used, Tube bending machine - Mandrel bending machine TRACTO-TECHNIK Type Transfluid DB 2060 K Series. No. 70173 Year of construction 2004 Bending capacity (steel) max. Ø 76.1 x 3.0 mm Bending capacity (stainless steel) max. Ø 76.1 x 1.65 mm Bending tool max. Ø 70 x 2 mm (for stainless steel) Tube slide-on length 4572 mm (4300 mm) Bending radius max. 150 mm Bending direction clockwise (right) Bending angle max. 190° Bending head speed at 90° 8 sec. Hydraulic operating pressure 200 bar Motor power 3 KW Mains connection 400 Volt, 50 Hz, 15 Amp. - Electro-hydraulic drive - Control panel with electronic control for 8 bending arms (IPU-8) - 360° twisting angle unit on precisely guided longitudinal sliding carriage up to 4300 mm extension length - Precisely guided longitudinal sliding carriage with adjustable stops - Hydraulic mandrel extension - Mandrel lubrication via hand pump in the operating area - Crease smoother - 10 tool sets with 10 mandrel bars 1x tool set Ø 18 - R27 1x tool set Ø 28 - R42.5 1x tool set Ø 29 - R50 1x tool set Ø 30 - R45 1x tool set Ø 33.7 - R51 1x tool set Ø 41 - R61.5 1x tool set Ø 40 - R60 1x tool set Ø 52 - R78 1x tool set Ø 53 - R80 1x tool set Ø 70 - R105 - Stainless steel mandrel tray, tightly welded with oil drain (length 5880 mm x width 450 mm) Space requirement of the machine L x W x H 5900 x 800 x 1600 mm Weight complete approx. 1.8 tons good condition Ceb Eor E Ht Aop Sxvegt

Condition: ready for operation (used), Year of construction: 2012, operating hours: 31,325 h, Functionality: fully functional, machine/vehicle number: 70836, bending radius: 180 mm, pipe diameter: 60 mm, TECHNICAL DETAILS Tube diameter: 20 - 60 mm Steel round tube: 60 x 6.0 mm Stainless steel round tube: 60 x 4.0 mm Square steel tube: 50 x 50 x 4 mm Stainless steel square tube: 60 x 40 x 2 mm Bending angle: up to 180 Cgsb Ep Soun Rc Noxvot MACHINE DETAILS Connected load: 37 kW Supply voltage: 400 V Mains frequency: 50 Hz Back-up fuse: 80 A Operating pressure: 200 bar Equipment: Pipe bending machine + control cabinet + cable

Condition: used, Year of construction: 2014, tube diameter 60 mm wall strength 3 mm bending radius min. 2 x Rohr-Ø ÷ R200 mm bending angle 0 - 180 ° gas tube pipelines 2" (60.,3mm) mm speed stufenlos 0,5 - 2,0 total power requirement 1,5 kW Cgsb Epeivqrbs Sxvot weight of the machine ca. 0,7 t - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle

Condition: new, Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 40793, bending angle: 90 °, type of input current: AC, pipe diameter: 28 mm, Tube flanging machine, new and unused still in original packaging. Surplus to requirement suitable for flaring and flanging pipework to 28mm diameter. Complete with 18x1mm and 19 x 1.2mm flanging dies. cycle time is 4-10 seconds. Capable of processing tube diameter up to 2.5mm wall thickness. Cobstq Ai Dj Ep Sxvsgt

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. Csb Ep Sed E A I Iexvogt We also offer hydraulic units.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 31,325 h, Functionality: fully functional, machine/vehicle number: 70836, bending radius: 180 mm, pipe diameter: 60 mm, TECHNICAL DETAILS Tube diameter: 20 - 60 mm Steel round tube: 60 x 6.0 mm Stainless steel round tube: 60 x 4.0 mm Square steel tube: 50 x 50 x 4 mm Stainless steel square tube: 60 x 40 x 2 mm Bending angle: up to 180 MACHINE DETAILS Connected load: 37 kW Supply voltage: 400 V Mains frequency: 50 Hz Back-up fuse: 80 A Operating pressure: 200 bar Cgob Ep Ssug Uzfoxvst Equipment: Pipe bending machine + control cabinet + cable