Mandrel bending machine

unbekannt 1200/740/H1220 mm

Condition: excellent (used), IMM 72780 Double-sided polishing machine Mint condition, the machine has hardly been used. Redju Hanyepfx Ahvop TECHNICAL DATA Polishing wheel: 100 - 500 mm shafts: 35 mm Spindle speed: 1500 rpm Voltage: 400 V, 50 Hz Weight of basic machine: Approx. 400 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm Rodpfx Asfg E Hlshvsp total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 220 t Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Stroke 350 mm Installation height 600 mm Throat depth 450 mm X-axis travel 750 mm X-axis speed 300 mm/s R-axis travel 250 mm R-axis speed 100 mm/s Clear gap between frames 2555 mm Machine length 3730 mm Machine width 2290 mm Overall height 3055 mm Table height 820 mm Motor power 22 kW Oil tank 300 l Machine weight 11,500 kg (technical data may vary depending on equipment) Redpfxoq D Dzlj Ahvop Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust backgauge, double-guided - Manual backgauge fingers, double-guided on linear rails - Movable front arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T CNC controller - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X-R axis with servo motors - CNC crowning for high bending accuracy - 2 additional backgauge fingers - Further bending lengths and capacities available with appropriate accessories! -

Condition: ready for operation (used), total length: 900 mm, total width: 400 mm, total height: 1,100 mm, empty load weight: 140 kg, gasleiding: Ø50 x 3,91 mm stalen buis: Ø60 x 3 mm roestvrijstalen buis: Ø60 x 2 mm koper/alu buis: Ø64 x 4 mm massieve staaf: Ø35 mm massieve rechthoekige staaf: 60 x 10 mm vlakke staaf (hard): 60 x 16 mm platte staaf (gemakkelijk): 60 x 30 mm doosdoorsnede: 60 x 30 x 4 mm maximale straal: 200 mm buigsnelheid: 1,25 2,5 rpm Rsdpfexllirex Ahvsp video klik hier Motor power: 1,5 kWt

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, Rsdpfxohpktvj Ahvjp - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 bottom shaft 30 mm top shaft 35 mm Rodpfx Ahed S Uf Sovjp two rollers driven with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Condition: new, Year of construction: 2023, arm reach: 1,400 mm, load capacity: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China Redjqnt N Depfx Ahvep -Type: AB6-C1400 -Number of axes: 6 -Reach: 1400 mm -Maximum payload: 6 kg -Control cabinet -Remote control -Wire feeder -Welding source: TIG WSM400R -Cooler

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 Rjdpfofifg Hex Ahvjp bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm Rjdstr U Hljpfx Ahvop → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: new, round material 30 x 1 mm square material 30 x 30 x 1 mm 16 mm 30 x 10 mm Rjdpfx Ahsh D Svnovop speeds 9 U/min total power requirement 1,1 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material 1x for? - footswitch