Used other plastic processing machinery for sale (68)

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 527, Price for the machine: 214,500 EUR Price for the tools: 97,500 EUR Hnodou Ivc Njpfx Ah Nog

Year of construction: 2013, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6234-05-013, Equipment: CE marking, type plate available, I am offering a used S.M.R.E. (SolarEdge) cutting plotter designed for tracing and cutting acrylic and synthetic fabrics. The machine is equipped with 4 heads, including 3 drag knife heads (2 rotary blades for different material thicknesses, a finger blade) and a plotter pen. Hjdpsxcvt Asfx Ah Nsng Main parameters: - table width: 3200 mm, - rated power: 8 kW, - supply voltage: 400V, - max. roll diameter: 800 mm, - automatic roll feeder with material guiding correction, - manufacturer's software for pattern design, - vacuum fan for holding down the material on the worktable. The machine is fully functional and still supported by manufacturer's service. It remains connected to power and is in active operation.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: RA2002006AA, overall weight: 30 kg, total length: 700 mm, total width: 650 mm, total height: 750 mm, 3 similar gravimetrics: Hnedjwqrrtspfx Ah Nog Silo volume: 20L Power Voltage: 230 VAC Frequency: 50/60 HZ Command Voltage: 6V Equipped with: Control Panel ( PLC Genius) Command Panel (Start/Stop + Butterfly Valve man/aut + Working Indicator of Open Butterfly Valve) Encoder Load Cell Pressure Sensor Electro Valve Butterfly Valve

Condition: excellent (used), Complete recycling machinery set 2x Dynamic washer K K Recycling s 30 Evolution Sand trap with equipment 1x Dynamic washer s 55 Evolution Conveyor belt x 4 Rotary slotted screen Control cabinet Hnsdpsw Spkzjfx Ah Neg

Condition: used, Year of construction: 2011, machine/vehicle number: AVZ80-160-315/29264/11-01, Adelmann Umwelt GmbH Rubber shredder Hjdpfx Ahjuab Dmo Nong

Condition: reconditioned (used), Working area: 400mm It has automatic knife approach Hodpfowr Nnhsx Ah Nong Two material feed speeds Material feed: roller - roller Digital display of divided thickness Equipped with the possibility of automatic material retraction Equipped with dust extraction and waste basket Machine in PERFECT technical condition after a major service Working area: 400mm It has automatic knife approach Two material feed speeds Material feed: roller - roller Digital display of divided thickness Equipped with the possibility of automatic material retraction Equipped with dust extraction and waste basket Machine in PERFECT technical condition after a major service Work area: 400 mm Automatic Messereinstellung Two Material feed speeds Material feed: roller - roller Digital display of divided thickness Equipped with the possibility of automatic material retraction Equipped with dust extraction and waste basket Machine in PERFECT technical condition after a major service Work area: 400 mm Automatic Messereinstellung Two Material feed speeds Material feed: Walze – Walze Digitale Anzeige der geteilten Materialstärke Automatischer Materialrückzug möglich Staubabsaugung und Abfallkorb vorhanden Maschine nach umfassender Wartung in einwandfreiem technischen Zustand

Year of construction: 2012, condition: ready for operation (used), There are three Concept Laser M1 3D printers available, year of construction machine 1/ 2/ 3: 2009/ 2010/ 2012, operational hours counter machine 1/ 2/ 3: 82,046/ 93,781/ 68,167h, with Laser Rofin StarFiber 200, water cooling, screening machine and documentation, at machine 1 the laser is broken and the machine is without optics, machine 2 is fully functional, machine 3 is fully functional, but a machine software error occurs regularly, which has to be fixed, afterwards production can always be continued, an inspection is possible, Hsdpfjnr Nr Hex Ah Nsng

Condition: new, Year of construction: 2024, functionality: fully functional, New UV light-curing units from Dr. Hönle, year of manufacture 2024, still in original packaging. Hjdpfow Ichljx Ah Nsng Includes controller and various LED curing lamps for hardening and irradiation. Wavelengths: 356 nm and 460 nm, output: 5,000–30,000 W/cm². More detailed information can be found in the attached PDF. 3 packages available, can also be sold separately. -- Please submit your offer price. Sale only within Europe (EU), including Turkey, the United Kingdom, and Switzerland. -- Technical specifications: see handout. Excluding packaging. Any guarantee or warranty is excluded. If you wish to dismantle the equipment yourself, please indicate this in your offer. We assume no liability for the accuracy of the technical data, for the completeness of included accessories or tools, or for the compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: refurbished (used), Year of construction: 2009, ø 450-1200 mm PE/PP Central clamping Hnodpfx Asw H Iyfoh Njg

Condition: good (used), Year of construction: 2019, functionality: fully functional, total length: 8,000 mm, total width: 4,000 mm, feed length X-axis: 8,000 mm, feed length Z-axis: 1,300 mm, feed rate X-axis: 70,000 m/min, cutting width (max.): 1,800 mm, table height: 700 mm, cutting height (max.): 1,300 mm, table width: 1,300 mm, table length: 3,000 mm, working height: 700 mm, input voltage: 400 V, saw band speed: 100,000 mm/s, power: 22 kW (29.91 HP), HEMA CoreCutter 900 from our test center - High-performance horizontal band saw Hjdpfx Ahjwifxde Nong - Ultra-precise slicing of blocks into sheets down to a minimum thickness of approx. 1 mm - Vacuum table for precise workpiece clamping - Dynamic servo axes for maximum productivity - 6 years of operation in the test center - Ideally suited for cutting lightweight construction blocks made from aramid, Nomex, Kevlar, balsa, PET, PVC, PMI, PU, and many more - General overhaul at the manufacturer's facility available upon request Gantry - Steel construction - 2x linear guide units per column - Servo motor with ball screw drive per side - Bellows cover for guides and spindles - Signal tower (red/yellow/green) on gantry control Control System - Control cabinet with climate control - Siemens PLC - Frequency-controlled drives - WAGO IO-Link modules - Operator panel with 12-inch screen, integrated into the control cabinet Paintwork - HEMA standard, grey RAL 7031/7047, signal red RAL 3001 Technical Data: - Wheel diameter 2x 900 mm - Table length 3,000 mm - Overall machine length max. 8 m - Cutting width approx. 1,800 mm - Cutting height/vertical stroke approx. 1,300 mm - Cutting height (saw blade – extraction hood) approx. 300 mm - Band drive 400 V, 50 Hz, 22 kW - Continuously variable band speed 500 – 6,000 m/min - Table feed rate max. 70 m/min - Compressed air 6 bar

Condition: ready for operation (used), 🔧 Key Specifications Forming Area: 620 × 620 mm (24.5 × 24.5″) Sheet Size: 660 × 660 mm (26 × 26″) Hsdpfxownxxbj Ah Nong Maximum Draw Depth: 250 mm (9.8″) Maximum Material Thickness: 10 mm (0.4″) Heating Zones: 12 (6 top + 6 bottom), independently controllable Heater Type: Ceramic (standard) or optional quartz Vacuum Pump: 16 m³/h dry rotary vane Power Consumption: 12.0 kW Air Requirements: 87 PSI / 6 bar Machine Dimensions (W × H × D): 1732 × 1500 × 2225 mm Weight: 300 kg

Year of construction: 2015, condition: used, functionality: fully functional, Epilog Fusion 40 / 120 Watt, laser engraving and laser cutting system - 120 Watt CO2 "WaveGuide" laser source, according to the last service on August 5th, 2024, laser power 132 Watt - Working area 1016X711mm - 2" focus lens - Drive: brushless DC servo motors for crystal-clear cutting edges in acrylic glass - Max. material thickness 362mm - Max. weight of workpiece: 91kg - Laser safety class 2 - Interface: Ethernet, freely programmable IP address - Air assistant on laser beam - Joystick for motorized movement of the axes - Zero position can be changed, machine LED lighting - Large format viewing window made of safety glass - Laser beam expansion, base frame on castors - Honeycomb cutting table - Round engraving unit for cylindrical objects with roller system Extraction: vacair UML 1350 extraction system - Recirculation system with 3 levels -Filter - Filter: particle filter HEPA H14, pre-filter cassette - Activated carbon cassette 43kg (with HEPA) - Fan output 1350 m³/h - Pressure 10,000 Pa - Separation level >99% - Suction/exhaust air nozzle DM 125mm - - Sale only to traders - Exclusion of any guarantee or warranty claims - Sale with invoice and VAT - No liability for spelling errors, typos - Sale as seen, later complaints excluded Machine in very good condition, few operating hours - Machine is very well maintained and clean New prices: Round engraving unit, built in 2019, €1840/net Hnodjvvha Sspfx Ah Njg Laser Fusion 40 /120 watts, built in 2015, €55,000/net Vacair UML 1350 extraction system, built in 2021, €5,450/net Total: €62,300/net

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Hnodjh Akm Topfx Ah Nsg

Condition: like new (used), functionality: fully functional, The LANCO side channel blower is for sale. Mounting plate dimensions: 260 mm x 115 mm 220 mbar 210 m3/h RPM 2850 Hnsdpfx Ahsv T Uzks Neg 1.5 kW

Year of construction: 2024, condition: new, functionality: fully functional, ø 110-450 mm, wall thickness max. 72 mm Hnodot A Ufdspfx Ah Njg Servo steel infeed and synchronization. NEW, unused

Year of construction: 2020, operating hours: 245 h, condition: good (used), functionality: fully functional, machine/vehicle number: QX20200111A551, Used - Pre insulated pipe decoiler. The decoiler could be used for other pipe types. Hnjdpfot Eatxox Ah Njg Pipe coiler parameters: Installed power: 5.5 KW Voltage: 220V Current frequency: 50 Hz Compressed air: 6 Bar Total weight: 1700 kg Coil dimensions: Coil ID: 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400mm Coil OD: up to 3100mm Coil width: up to 1100mm Please call for more information

Year of construction: 2015, condition: ready for operation (used), There is a complete pultrusion line with three Krauss Maffei RimStar Nano pumping machines, three creels, ABUS column-mounted slewing jib crane and a KraussMaffei EW 2300 CFI winder, tensile force: 10t, max. profile dimensions: 300x50mm, max. speed: 4m/min, on-site inspection is possible. Hnsdsriurbopfx Ah Nog

Year of construction: 2011, condition: ready for operation (used), A rotational molding machine consisting of 2 rotational units and an oven in between. Rotation unit: Weight: 7500kg, weight with load: 11500kg, on 8 350mm x 350mm base plates. Rotation unit diameter: 3300mm. Compressed air nozzles: Pneumatic connection: 1inch, water connection: 0.5inch, 6bar, height: 1500mm. Oven: Dimensions X/Y/Z: approx. 5800mm/4200mm/6800mm, weight: approx. 27000kg, max. temperature: 400°C. Documentation available. Hsdsr Eqvdjpfx Ah Njng