Used other metal processing machinery for sale (535)

Year of construction: 1990, condition: used, functionality: fully functional, machine/vehicle number: EHP 340 43/31, Müüa võimas painutuspink 3400kN, trapetsi pikkus 4400mm, tera 4300mm. Nljdpjxt Ettofx Ag Ieh Pink on töökorras, meie firmas töötanud 7-8 aastat, nädalas max 10 tundi. Hollandi toode. Kõrgus ilma kateteta alla 3m, kaal 27,5 ton, alumine põll käib 6-poldiga ära, kaalub 5 ton seetõttu tõstekaal 22,5 tonni.

Year of construction: 2025, condition: new, functionality: fully functional, The Blasting room (also called a sandblasting room or shot blasting room) is an enclosed area designed for cleaning, roughening, or surface preparation of materials such as metal, concrete, stone, or wood. Inside the room, abrasive materials (like quartz sand, steel grit, aluminum oxide, or glass beads) are propelled at high speed using compressed air to remove rust, paint, scale, or dirt from the surface and achieve the desired roughness. Main Components of a Sandblasting Room Blasting Chamber / Room: A steel-structured enclosure with wear-resistant lining to protect the interior walls. Blasting Machine (Nozzle System): Mixes compressed air and abrasive media, then directs it toward the workpiece. Dust Collection System (Filter Unit): Removes airborne dust and maintains clean air inside the room. Abrasive Recovery System: Collects used abrasive material, cleans it, and recycles it for reuse. Operator Equipment: Nsdpfx Asxr Am Ueg Ielh The operator wears protective gear, including a helmet with air supply, gloves, and a blast suit. CODE DIMENSIONS OF SANDBLASTING AREA (L x W x H) mm KO - 1 4.000 x 4.000 x 3.000 KO - 2 6.000 x 3.000 x 3.000 KO - 3 6.000 x 5.000 x 5.000 KO - 4 10.000 x 5.000 x 5.000 KO - 5 12.000 x 5.000 x 4.000 KO - 6 15.000 x 5.000 x 5.000 KO - SPECIAL 27.000 x 18.000 x 9.000

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Nodpsv D Uhfsfx Ag Iolh Adaptive to different sizes of tubes Servo control, excellent performance Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Highly automated ≤2m workpieces are unloaded through servo flaps

Year of construction: 2025, condition: new, Overhead Continuous Shot Blasting Machine? An overhead continuous shot blasting machine is an automatic surface cleaning system used mainly for removing rust, scale, paint, or other impurities from metal surfaces. In this system, the workpieces are suspended from an overhead conveyor line and pass continuously through a blasting chamber, ensuring high productivity and consistent quality. ⚙️ Working Principle Loading: The parts are hung on rotating hooks or hangers attached to an overhead conveyor line. Transportation: The conveyor automatically carries the parts into the blasting chamber. Blasting Process: Inside the chamber, high-speed turbines throw steel shots or abrasive media onto the surface of the parts. This removes rust, scale, burrs, and old paint layers, leaving a clean, roughened surface. Rotation of the Hanger: Nlsdpfxsxuhf Ie Ag Ieh The hooks or hangers usually rotate to ensure that all surfaces of the part are evenly blasted. Discharge and Recovery: After blasting, the parts exit the chamber. The used abrasive is collected and recycled, while dust is filtered through an efficient dust collection system. CODE W: x H: Turbine ASK-KON - 1 1.000 x 1.000 4 x F400 ASK-KON - 2 1.000 x 1.500 6 x F400 ASK-KON - 3 1.000 x 2.000 8 x F400 ASK-KON - 4 1.500 x 3.000 12 x F400 ASK-KON - 5 1.500 x 4.000 12 x F500

Year of construction: 2025, condition: new, Pipe Shot Blasting Machine A pipe shot blasting machine is a specialized surface treatment system designed for cleaning, roughening, or preparing the inner or outer surfaces of cylindrical (pipe-shaped) metal parts. It removes rust, oxide, scale, burrs, and old paint coatings using high-speed abrasive blasting (with steel shots, grit, or sand). ⚙️ Working Principle Loading: Pipes are placed on a roller or conveyor system for easy movement. Transportation: The pipes are automatically conveyed into the blasting chamber via a roller conveyor or continuous feed line. Blasting Process: Inside the chamber, high-speed turbines throw steel shots or abrasive material onto the pipe’s surface. During the process, the pipe rotates and moves forward, ensuring uniform cleaning across the entire surface. Cleaning and Recovery: The used abrasive is automatically collected, filtered, and reused. Dust and impurities are removed through an industrial dust extraction and filtration system. CODE DIMENSIONS TURBINE CBK - 1 Ø 48 – 219 2 x Ø 320 CBK - 2 Ø 219 – 500 2 x Ø 320 CBK - 3 Ø 500 – 1000 2 x Ø 500 Nljdpjxuhrbofx Ag Ijh CBK - 4 Ø 1000 – 2000 2 x Ø 500

Condition: ready for operation (used), Year of construction: 2013, operating hours: 26,646 h, functionality: fully functional, machine/vehicle number: 20360, Available for inspection in operation at our production facility. Waterjet cutting machine 6x3m, 1x2.5D cutting head, incl. HD pump 4000 bar, stainless steel cutting tank, abrasive remover. Purchase date 03-12-2013 Serial number 20360 Model Resato ACM 3060 Operating hours 26,646 hours (as of 24 October 2025) XY working range machine 3020 x 6020 mm Precision in X or Y axis +/-50 µm Maximum gap between bridge 210 mm +/- 10 mm Z-axis range -220 – 0 mm Maximum working pressure 4000 bar Minimum speed 1 mm/min Speed range 1 – 30,000 mm/min Maximum acceleration 500 mm/s2 (acceleration depends on cutting process) Ambient temperature 12 – 32°C Relative humidity 30 – 80% Nledpoxu U Nmofx Ag Ioh General protection class IP54 Specific protection class IP65 Voltage-frequency 1x 230 ± 5% VAC, 50-60Hz Electrical connections 1 x 16A + N + PE Operator panel 17’’ touchscreen, color Network/internet connection RJ45 socket Communication 100BaseT CAT5e Slat load capacity 1000 kg/m2 Floor load 5 N/mm2 Air connection Quick coupling, type Orion Air quality Dry and filtered air Dew point at 3°C at 7 bar Min 7 bar, max 12 bar 30 Nl/min Required floor flatness Max 15 mm deviation over 6 meters Typical sound pressure level 87 – 92 dB Special details The tank was originally plastic but has been modified to stainless steel Pump specifications (optional extra pump available as spare) PJ4-4000 – Resato Waterjet Centix ID: 601194 Model: Resato Powerjet 4000 Serial number: 18996 Purchase date: 26-11-2012 Max. capacity: 3.8 L/min Max. pressure: 4000 bar Max. power: 30 kW Number of intensifiers: 1 Low noise level:

Year of construction: 2014, condition: refurbished (used), High-performance 40 Ton Triple tube drawing bench BÜLTMANN GKZ 400/3-16 Complete 40 tn triple tube drawing line, revamped by Bültmann in 2014. Includes extensive set of tooling and large spare parts package. This BULTMANN GKZ 400/3-16 Triple tube drawing line combines a robust 40-ton drawing capacity with significant upgrades completed in 2014, including a Siemens S7-400 PLC conversion, renewed machine bed, rebuilt puller, and upgraded drawing carriage. The line is available immediately and is suitable for demanding tube production applications. TECHNICAL SPECIFICATIONS · Manufacturer: BÜLTMANN · Model: GKZ 400/3-16 Triple · Major overhaul: 2014 - Control cabinet overhauled - PLC converted to Siemens S7-400 - New Siemens drives - Machine bed renewed - Drawing carriage converted (wheels, damping, etc.) - New chain - Puller rebuilt · Material strength: 500 N/mm² · Input tube length: 2.5–12 m · Exit tube length: 3–16 m · Maximum drawing force: 400 kN (40 tons) · Maximum drawing speed: 80 m/min · Return speed: 120 m/min · Main motor power: 300 kW · Hydraulic power unit: 30 kW · Auxiliary drives: 7.5 kW · Tube diameter range*: 20–65 mm · Wall thickness range: 1–5 mm * Tube range produced by the previous owner. Tooling is available for this range and should be verified onsite. SCOPE OF SUPPLY - Complete drawing bench according to layout - Renewed machine bed - Upgraded drawing carriage - New chain - Rebuilt puller - Electrical system with Siemens S7-400 PLC and Siemens drives - Hydraulic system - Existing safety barriers - Large set of tooling (to be verified onsite) - Comprehensive spare parts package (to be verified onsite) - Documentation in digital and paper format BENEFITS ✓ High-capacity 40-ton drawing force for demanding tube production ✓ Modernized Siemens automation for improved reliability and maintenance ✓ Major mechanical refurbishment completed by BÜLTMANN ✓ Includes tooling, spare parts package, and documentation ✓ Immediate availability for rapid installation COMMERCIAL INFORMATION - Machine status: Dismantled - Video of the line in operation available - Delivery: Immediate | As is, where is Material strength: 500 N/mm² Input tube length: 2.5–12 m Exit tube length: 3–16 m Maximum drawing force: 400 kN (40 tons) Nodpfx Agjzkf I Es Islh Maximum drawing speed: 80 m/min Return speed: 120 m/min Main motor power: 300 kW Hydraulic power unit: 30 kW Auxiliary drives: 7.5 kW Tube diameter range*: 20–65 mm (*Produced by previous owner. Tooling available for that range. To be checked onsite) Wall thickness range: 1–5 mm

Year of construction: 2020, condition: as good as new (ex-display), The TS-200K mortising machine is a device manufactured in Taiwan by EASTAR MACHINE TOOLS CORP., a leading company in the industry. The machine is characterized by its perfect level of workmanship; the body is made of cast iron, and all guides are made of high-strength steel. The machine body is machined on CNC machines, ensuring the geometry of the machine and high precision in fitting. The machine guides are protected by bellows, and the device is also equipped with a central lubrication system, which minimizes the operator's maintenance requirements. This makes the TS-200K mortising machine an exceptionally durable device that guarantees trouble-free operation for many years. The device is primarily used in tool rooms and maintenance workshops. Due to its ease of operation, the TS-200K mortising machine is ideal for both single-piece and series production. The machine has a CE certificate, and the operating manual is available in Polish. Main features: • Hardened and precisely ground beam guides ensure precise movement and high wear resistance. • 8 mortising speeds, allowing adjustment for different types of tools and mortising operations. • Central lubrication system ensuring lubrication of key machine components. Nsdsy Uxf Uspfx Ag Iolh • Ability to tilt the mortising head in the range of +/- 30°. Technical parameters Unit TS-200K Maximum ram stroke [mm] 200 Number of strokes per minute (50Hz) [1/min] L: 22, 26, 31, 39 H: 44, 52, 61, 78 Vertical adjusting travel of the beam [mm] 220 Beam tilting angle [°] +/- 30° Distance between the base of the beam and the surface of the work table (A) [mm] 300 Distance between the tool axis and the surface of the column (B) [mm] 355 Diameter of the work table [mm] 400 Longitudinal travel of the work table (X) [mm] 250 Transverse travel of the work table (Y) [mm] 250 Main motor power [kW] 1.5 Device weight [kg] 750 Device dimensions [mm] 1260x810x1730

Condition: used, Surfacing and jig boring machine LIZUAN • Maximum diameter: 80 mm Njdpjzcpqiofx Ag Iolh • Minimum diameter: 10 mm • Maximum lenght: 1.000 mm • Minimum lenght : 70 mm

Condition: good (used), Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 1420 mm -Wall thickness: 12,5 mm -Length: 920 mm -Weight: 434 kg/m² Nlodjzfahiepfx Ag Ish

Year of construction: 2022, condition: like new (used), functionality: fully functional, For sale ATMS WaterJet 2015-B waterjet cutting machine with a working area of 2000 × 1500 mm. The machine was purchased brand new and installed in March 2022. It was purchased with EU funding for laboratory use, but was used only once during installation, for testing purposes. The actual operating time of the machine is approximately 5 working hours. Reason for sale We are engaged in research and prototype development. In practice, it turned out to be easier and more cost-effective to cut metal parts using other available equipment, therefore the machine was not used further. Technical condition • very good technical and visual condition • complete machine • stored in industrial conditions • full technical documentation available Main technical data • Working area (X × Y): 2000 × 1500 mm • Z axis travel: 200 mm • Nominal power: 37 kW, 400 V / 50 Hz • Maximum pressure: 410 MPa (60,000 psi) • Drives: servo • Control system: CNC (NC-Studio, PC with Windows OS) • Supported file formats: G-code, DXF, NCE, NC, CNC • Maximum feed rate X/Y: 15,000 mm/min • Cutting speed: 10,000 mm/min • Automatic abrasive feeding system (200 L) • Laser positioning system • Manual head tilt adjustment up to 45° • Water treatment system • Oil cooling system with fans Price: to be agreed Location: Poland / Mazowieckie region Nedpfx Agjx Rqycj Islh

Condition: used, functionality: fully functional, SECOND-HAND MITRE SAW FOR IRON RAIM 22 Nlodpfx Agjx Rrlto Ijh

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS40 Valid for: Hot and cold pointing Njdpfx Aeymadhog Iolh Feeding: Automatic and manual Forming capacity: 4 x 40 Mp Number of strokes: 710/min Diameter for round point: 12-90 mm Diameter for folded point: 20-120 mm Diameter of reduced section for both point types: Max. 60 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS25 Nsdpfjymadusx Ag Ielh Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 25 Mp Number of strokes: 800/min Diameter for round point: 10 - 75 mm Diameter for folded point: 18 - 100 mm Diameter of reduced section for both point types: Max. 50 mm Feed speed, infinitely variable: 0 - 70 mm/sec

Condition: used, Industrial shredder chopper Nlsdpfeymaiqex Ag Ieh This industrial shredder / bead chopper is a simple, robust, and versatile solution designed for the efficient volume reduction of your metallic waste, such as: - Metal scraps - Continuous welding beads - Other compatible metallic waste for industrial recycling. Its power allows it to shred, chop, and fragment various types of industrial waste, facilitating their compaction, waste management, and preparation for industrial recycling. SPECIFICATIONS Shredding: Designed to handle constant flows of metallic waste, optimizing your recovery and recycling operations. Blade access opening: A wide opening of 402 x 502 mm to facilitate the feeding of various materials. Blade configuration: Equipped with 1 blade shaft of 25 mm width, designed for effective and uniform chopping. Shaft rotational speed: Operates at 35 r.p.m., offering an optimal balance between shredding power and efficiency. Voltage: Prepared for standard 400/50 Volt/Hz connections. Weight: At 500 kg, this is a solid and durable machine, built for intensive industrial use. Blade access opening: 402 x 502 mm Number of blade shafts: 1 unit Blade width: 25 mm Shaft rotational speed: 35 r.p.m. Voltage: 400/50 Volt/Hz Weight: 500 kg

Condition: refurbished (used), 100% REVISED IN 2025 PROCESSING CENTRE FOR DEBURRING & CLEANING OF SHORT TUBE RSA RASAPLAN NV & RASACLEAN SK Scope of supply: 1. RSA automatic loading system for short pieces 2. Deburring system RASAPLAN N00; 3. RSA cleaning system RASACLEAN SK for short pieces Complete line RSA for short size/diameter tube with loading , deburring, washing. Thickness: 3 mm Pieces length / fixed lengths: 40 – 120 mm Nlsdpfsymarfox Ag Ieh Length tolerance: 0,5 mm Deburring system: RASAPLAN NK V 500

Condition: used, Complete entry line, made by OTO MILLS - Double Decoiler with bottom/top hold-down roll - Strip peeler & Pinch-roll Nsdsymatijpfx Ag Ielh - Automatic strip joiner - Extra-sized horizontal accumulator Scope of supply includes: Double Uncoiler AD508SD - Double hydraulic expansible mandrel - Hydraulic Mandrel rotation - Hydraulic Uncoiler rotation/lock - Hydraulic Uncoiler traverse for alignment - Brake pneumatically-operated disc OTO Mills Pinch-Roll and flattener PRS566 - 3+2 rolls - Hydraulic roll positioning OTO Mills 100% automatic butt-welding unit GG566 - Complete automatic joining and welding process - Strip exit table with encoder - Motorized strip exit Pinch-roll OTO Mills Horizontal Accumulator - Heavy Duty horizontal accumulator - Motorized Feeding Pinch-roll – 106 KW - Rotating table with Main motor 106Kw - Approx. 6,5 meter external table - Exit strip guiding Turret OTO Mills Tube diameter: 76,1 - 168,3 mm Material thickness: 2 - 6.3 mm Double Uncoiler: AD508SD Pinch-Roll and flattener: PRS566 100% automatic butt-welding unit: GG566 Accumulator: Heavy Duty horizontal accumulator

Condition: used, Stainless steel welding line MOD.50/60, made OLIMPIA 80 with TIG welder & Seam bead roller & Orbital polishing Nledpfxjymauto Ag Ijh Specifications: - Diameter : 18 – 63.5 mm - Thickness : 0.5 – 3 mm - Length : 3 – 6 m - Speed : Up to 3 m/min Diameter: 18 – 63.5 mm Length: 3 – 6 m Speed: Up to 3 m/min

Condition: used, Automatic packing machine Manufacturer: MAIR Model: .90.D.6.SL Nsdoyma Adopfx Ag Ijlh Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE_M_TS-31J-WILT_4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 4 - 12 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/6/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 4 – 12 m Square bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 2 Tn

Condition: used, Bar straightener WRPF 35-50, made by KIESERLING Bar diameter : 8 - 50 mm Speed : Up to 50 m/min Njdpfx Aoymcmrog Iolh Scope of supply includes : - Bar Loading channel - Input pinch-roll - Straightening machine WRPF35 - Exit pinch-roll - Bar Output channel - Electric equipment. (Option: NEW with HMI control desk) - Existing spare parts - Documentation - Optional: Loading table - Optional: Unloading cradle Bar diameter: 8 - 50 mm Speed: Up to 50 m/min

Year of construction: 2006, condition: ready for operation (used), overall weight: 880 kg, Profile Rolling / Crimping Machine manufactured in 2006. This SCHÜCO ISOMAT 4 features a maximum operating pressure of 0.8 MPa and a nominal pressure of 0.7 MPa. With a machine weight of 880 kg and an additional safety roller set weighing 250 kg, it is designed for robust performance. If you are looking to get high-quality profile rolling capabilities, consider the SCHÜCO ISOMAT 4 machine we have for sale. Contact us for further details. • Supply Voltage: 400 V • Frequency: 50 Hz • Rated Current: 3.5 A • Power: 1.2 kW • Maximum Operating Pressure: 0.8 MPa • Nominal Pressure: 0.7 MPa Additional equipment Nlodjypcilepfx Ag Ioh • Optional available: big set of roller and accessoriesSafety Roller Set (Richtrollensatz), 250 kg

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Nedpowz Ufwsfx Ag Ielh Type: Two chucks

Condition: used, functionality: fully functional, maximum load weight: 260 kg, overall weight: 3,500 kg, loading space length: 10,000 mm, loading space width: 2,500 mm, color: light grey, Year of construction: 2025, input voltage: 380 V, input frequency: 50 Hz, laser power: 3,000 W, pipe length (max.): 6,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Hohe Geschwindigkeit · Hohe Präzision · Hohe Stabilität Diese Maschine verfügt über ein hochpräzises Spannsystem, das speziell für das Rohrschneiden entwickelt wurde. Nsdpfx Agewwi H Us Ielh Dank hervorragender Abdichtung und Staubschutz bietet sie eine Spanngenauigkeit von ≤0,1 mm – ideal für die hochpräzise Bearbeitung kleiner Rohre. Das Spannfutter dreht sich mit bis zu 160 U/min und erreicht eine Beschleunigung von 1,5 G. Dies ermöglicht die hocheffiziente Bearbeitung von Rohren mit kleinem Durchmesser. Unterstützt automatisches oder halbautomatisches Laden. Ermöglicht mühelos intelligente und automatisierte Bearbeitung. Eine Maschine ersetzt drei Mitarbeiter.

Year of construction: 1997, condition: ready for operation (used), - USED - DIE SPOTTING PRESS TONNAGE: 300 ton Nlodpfx Ajwl R Ayjg Ieh UPPER HAMMER SIZE: 3500X2500 mm TABLE TRAVEL: 2500 mm OVERALL DIMENSIONS: 6000 x 7715 x 7095 mm NOTE: TILTING OF THE SWING TABLE 110°; MAX UPPER MOULD WEIGHT 24 Ton; MAX MOULD WEIGHT ON BOTTOM SLIDING TABLE 59 Ton.

Condition: ready for operation (used), BJZ NTM 300 SL Component Separator Machine Max. separating length: 300 mm Weight: approx. 110 kg Operating pressure: 6 bar You are welcome to arrange an appointment for inspection. Njdpfx Aexdw Epog Islh We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For customers outside Germany, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers as well. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.