Used multi spindle machines for sale (208)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 46,942 h, functionality: fully functional, machine/vehicle number: 4903-0208, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Submission of a bid obligates the buyer to collect the item on time, no later than 15/11/2025! The following machines will also be sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2007: Listing ID A20303190 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of cross slides: 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round stock: 42 mm Max. across flats for hexagonal stock: 36 mm Max. width for square stock: 29 mm Max. bar feed per station: 130 mm Max. bar feed over two stations: 260 mm Max. radial slide travel: 52 mm Radial slide adjustment, forward/backward: ±20 mm Max. axial slide travel: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle travel: 120 mm Adjustment, forward/backward: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main Motor Main motor rated power: 22 kW Main motor speed: 1,455 rpm Rjdpfx Ajxnxgpodrsw Coolant tank capacity: 750 L Operating hours: 46,942 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2007, operating hours: 55,585 h, functionality: fully functional, machine/vehicle number: 4903-0266, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Placing a bid obliges you to collect the machine by the deadline of 15.11.2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. bar across flats for hexagonal material: 36 mm Max. bar side length for square material: 29 mm Max. bar stroke at one station: 130 mm Max. bar stroke at two stations: 260 mm Max. radial slide travel: 52 mm Radial slide adjustment, forward/back: ±20 mm Max. axial slide travel: 72 mm Redoxnxm Ajpfx Adrow Max. rapid traverse speed: 9.6 m/min Max. tool spindle stroke: 120 mm Adjustment, forward/back: 10 mm MACHINE DETAILS Dimensions & weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated output of main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank volume: 750 L Operating hours: 55,585 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Further accessories

Condition: repair required (used), Year of construction: 1989, 6 spindles Thread cutting Cross drilling Rjdpfx Adev R Uqtjrsw Thread rolling Milling attachment Many accessories Feed motor (curves) defective! with IEMCA PRA 40/32 P bar loader

Condition: good (used), Multi-spindle lathe (6 spindles) max. bar diameter 16 mm guide tubes 4,000 mm chip conveyor Rsdpop Dux Tefx Adrjw

Condition: used, Year of construction: 2019, Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2019 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot make HandlingTech. Rodpfx Ajldk R Hjdrew The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on or *

Condition: used, Year of construction: 2016, Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2016 full cross slide configuration, Rjdpsldk R Rofx Adrow counter spindle, part-pre-drawing device, 2 x driven tools, 3 x Y-axis, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot, manufacturer HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on or *

Condition: used, Article: cam Manufacturer: Schütte For Schütte multi spindle automatic lathes F- and G-Type of different sizes Please, contact us for getting more information and pictures on mail(at) or * Rjdon H Nzfspfx Adrjw

Condition: used, Article: gears Manufacturer: Schütte For Schütte multi spindle automatic lathes F- and G-Type of different sizes Please, contact us for getting more information and pictures on mail(at) or Redpfjn H Nzmjx Adrsw *

Condition: good (used), Year of construction: 2004, machine/vehicle number: 2420701, CNC multi-spindle automatic lathe, make Index, type MS52C2-1, year 2004, serial no. 160024, - robot cell, - 7 clamping devices, Redpfelmkucjx Adrsw - 3 rigid tool holders simple, - 3 rigid tool holder multiple, - 4 powered tool holders, - Suction Büchel Handlings and assembly robot cell Stäubli Unimation incl. basket translator with basket stack for raw and finished parts, two shuttles on top of each other for supply/removal baskets, Integrated measuring station Commissioning 2021 Connected load 24 kW, control, make Index, type C200-4D (Siemens 840 D basis), - 2 steering positions, - 6 spindles, - travel X/Y 300 x 500 mm, - bar diameter max. 52 mm, - - spindle speed max. 5000 rpm, -12 tool carriers, coolant system, - Industrial robot, make Stäubli, - programming panel, - extraction device, - settling device, - Accesories

Condition: ready for operation (used), Year of construction: 2015, operating hours: 34,044 h, functionality: fully functional, machine/vehicle number: 270240, number of spindles: 6, bar diameter (max.): 22 mm, bar length: 3,000 mm, spindle diameter: 40 mm, TECHNICAL DETAILS Number of spindles: 6 Spindle bore: 40 mm Bar diameter: 22 mm Bar loader length: 4.70 m Bar length: 3.0 m Rsdsw T Rygspfx Adrjw MACHINE DETAILS Rated voltage: 400 V Rated power: 60 kW Connected load: 71 kVA Maximum fuse: 125 A Line voltage: 400 V Electrical frequency: 50 Hz Control voltage: 24 V DC On-time: 50,134 h Hydraulics on: 43,972 h Running time: 38,809 h Production: 34,044 h EQUIPMENT - Complete replacement of the energy supply for all 6 main spindles in April 2025 - Single-NCU without PCU - Bar feeder Iemca SIR MS22 P 33 (year of manufacture 2015)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Fanuc 31i, turning bush, pcs catcher, pcs conveyor, pce ejector, coolant tank, Robobar SBF-532 bar3600mm Manufacturing origin Japan Voltage 400V Netweight 3000 kg Dimensions 240x138x205 cm Total power Custom position 8458.11 20 TECHNICAL DATA Number of axes 8 Number of spindles 2 Control Fanuc 31i Main spindle Max bar diameter 25.4 mm Travel 230 mm Speed 10'000 min-1 Power 5.5 kW C-axis indexing precision 0.1° Counter-spindle Max bar diameter 25.4 mm Spindle speed 10'000 min-1 Power 5.5 kW C-axis indexing precision 0.1° Number of guide bushes 2 Guide bush 1 Number of positions 10 Number of motorised positions 4 Live tools speed 10’000min-1 Guide bush 2 Number of positions 6 Number of motorised positions 2 Live tools speed 10’000min-1 End-attachment Number of positions 4 Secondary operations Number of positions 2 Voltage 400V Installed power 14kW errors and omissions excepted-data given without obligation Inventory nr.2180201, machine equipped with : Control Fanuc 31i Rotating guide bush Parts catcher Rodpjd Hihysfx Adrew Parts conveying band Parts ejector Coolant tank Bar-feeder Robobar SBF-532, longueur barre max 3600 mm

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, number of spindles: 2, controller manufacturer: Siemens, controller model: 840D Solution-Line, Comprehensively equipped turning and milling center with main and counter spindles! TECHNICAL DETAILS Spindles Main spindle: D65 Counter spindle: D65 Tool Carriers Tool Carrier 1: Motorized milling spindle, HSK A40 tooling system Rjdpfxjwylz Te Adrew 2 × 3 fixed tool stations: VDI25 on TC1 XYB Tool Carrier 2: Motorized milling spindle, HSK A40 tooling system 2 × 3 fixed tool stations: VDI25 on TC2 XYB Cooling Systems Interface: Cooling water for machine cooling Cooling unit: Spindle and electrical cabinet cooling Coolant through main spindle: available Coolant through counter spindle: available Coolant pump 8 bar: on cleaning system Medium-high pressure pump 20 bar: on cleaning system High-pressure pump emulsion: 16 l/min High-pressure pump oil: 33 l/min, max. 80 bar Fine filtration of coolant: Compact belt filter type KF150 Filter fleece type: PN 100/100-540 Clean water tank: 1,500 × 1,010 × 600 mm (approx. 900 l capacity) 5-axis machine configuration: available Control: Siemens 840D Solution-Line EQUIPMENT Tool changer Electronic shaft for spindles and drive systems Main spindle expansion stages Stop device including coolant supply through main spindle with solenoid valve Counter spindle expansion stages Stop device including coolant supply through counter spindle with solenoid valve Accuracy package Portal loading system Finished part conveyor Hinged belt conveyor, 1,250 mm with lift pump Chip discharge on the right Coolant supply and fine filtration Bar feeder INDEX LMS 3,200 SBL Expansion direction for SBL Various tool holders (fixed and driven) Various sleeves for the bar feeding magazine

Condition: like new (used), Year of construction: 2021, Offered is a double spindle pick up turning machine VSC 500 DUO. The machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. The machine can be equipped with various periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. COTROL Siemens 840 Dsl TECHNICAL DATA workpiece diameter: max. 440 mm workpiece height: max. 250 mm chuck diameter: 450 mm swing diameter: 550 mm X-stroke: 925 mm Z-stroke: 400 mm TOOL CARRIER 2x EMAG disc turrets, 12x CDI 68, with driven tools Rjdpfx Adot Du Tdorsw Price, delivery time and equipment of the machine on request.

Year of construction: 2018, operating hours: 7,879 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 8110000014B, A rebuild of the machine took place in 2021: - Change of bar feeder from Chucci to Iemca Next 25-33 - Change of control from Fanuc 30i-B to Fanuc 611 SL IV (Slim Line) - Addition of valve block for hydraulic control of cooling lubricant supply (equipped with 28 controllable valves for high pressure) - an electronic parts shuttle for unloading the workpieces was installed - converted to a tool breakage monitoring system Artis / CTM program TECHNICAL DETAILS bar capacity: 36 mm number of main spindles: 6 number of cross slides X-Y axes: 6 C axes: 6 angular resolution: 0,002 ° Rotational speed: 7500 rpm Rjdpjmduh Eefx Adrsw rapid traverse: 40 m/min spindle positioning: 0,1° Drive unit tool speed: max. 13800 rpm MACHINE DETAILS working area: 21,9 sqm (with loader) net weight machine: 15 t chip conveyor: included LUBRICANT DETAILS oil tank volume: 1.800 l total oil volume: 2.000 l 6,3 bar: 140 l/min 45 bar: 100 l/min 80 bar: 50 l/min BAR FEEDER DETAILS Model: Iemca Next 42/33 bar length: max. 3300 mm bar length: min. 2400 mm Loading capacity as area loader: 450 mm bar diameter: 4 - 36 mm Guide channels: 6 fixed + 6 movable (with spindle reduction tubes and bushings)

Condition: excellent (used), Year of construction: 1973, 3 Gildemeisters AS32-6 in good state for sale Rjdped S E Itefx Adrjw Different separate spare parts available, among which a new tapping device, a new bronze crown wheel for the main drive, a cross drill device, several gripping spindles for processing the rear of product and several other spare parts €12.500 per Gildemeister

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, total width: 2,500 mm, total length: 4,500 mm, total height: 3,200 mm, Offered is a double spindle pick up turning machine VSC 250 DUO. There are 2 nearly identical machines available. Each machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. Rodpfxor Nc Ufo Adrjw The VSC 250 DUO will receive a general overhaul before delivery and gets a control upgrade to Siemens Sinumerik ONE. The machine can be equipped with other periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. COTROL Siemens Sinumerik One TECHNICAL DATA workpiece diameter: max. 250 mm workpiece height: max. 150 mm chuck diameter: 250/315 mm swing diameter: 350 mm X-stroke: 745 mm Z-stroke: 300 mm TOOL CARRIER working area 1 1x EMAG disc turrets, 12x VDI 50 without driven tools working area 2 1x EMAG disc turret, 12x VDI 50 with driven tools Price, delivery time and equipment of the machine on request.

Condition: like new (used), Year of construction: 2015, Pick-up Rsdpfx Adoyck Rdorew Threading device No. 04 turning slides Integrated loader Cucchi BLT model MULTI-6, year 2016

Year of construction: 2002, condition: good (used), functionality: fully functional, 3 Main spindle with 70mm bar passage FUNCTIONS The raw bar is machined in spindle 1 and 2 with a 12-position star turret. At the same time, a 2-station front turret can work on this spindle (for drilling or internal boring). After machining, the drum cycles. The pre-turned part is finished in spindle 3 with a 12-position star turret and tapped. The part is then finished in the counter spindle and unloaded by the unloading gripper (monitoring available). The bar is retracted and the drum cycles. TECHNICAL DETAILS Bar passage: 70 mm counter spindle tool turret: 5 pieces, VDI30 (CNC cross slide) High pressure internal cooling: two turrets Measuring system: direct, high resolution in all X-axes Control system: Siemens 840 D Powerline tool monitoring: Artis Rjdpfx Adsn Uum Hjrjw Collet chuck: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: Roughing of the turned part Tool holder: star turret with 12 positions Other: Possibility for additional work by 2-fold frontal turret Main spindle 2: Finishing of the turned part Tool holder: 12-position star turret Other: Possibility for finishing by 2-fold frontal turret Main spindle 3: Finishing, parting and backworking of the turned part Tool holder: star turret with 12 positions EQUIPMENT Bar feeder for 1500mm long bars

Condition: excellent (used), Index MS42C Rsdpfxjfdr R Uj Adrow HBF rod guide Oil distributor Flaps with tensioning screws

Condition: new, MANURHIN K'MX 620 is designed for the productive machining of workpieces consisting of bars with a maximum diameter of 20 mm. The machine is equipped as standard with two electro-spindles with a maximum speed of 12,000 rpm and a rotating guide bush synchronised with the main spindle by means of pulleys and belts. Main features: - Max. bar material diameter 20 mm - 12,000 rpm on both spindles - Main spindle power 3.7/5.5 kW - Spindle travel 210 mm - Number of tools in the cut at the same time: 2 - Power of rotating tools: 2kW - Number of stations: 22, 9 of which can be motorised Rsdpfx Adsuqngqsrsw

Condition: excellent (used), MORI-SAY 6/32 rebuilt in standard configuration with : - 4 composite slides at stations 1-2-4-5 with independent movement - SIEMENS model S5 Simodrive motors for feed speed conditions Chip conveyor : Removable tank with chip conveyor Pick-up : Synchro pick-up Rodpemhfxmsfx Adrjw Pick-up brake Hydraulic slide for rear machining Other accessories and special accessories on request

Condition: used, SLAT/CALENDAR CLOSING MACHINE Rjdpfx Aoxl Ryiodrew PNEUMATIC MACHINE FOR CLOSING PATENTED S/C PROFILE

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, number of spindles: 2, spindle speed (max.): 6,500 rpm, travel distance X-axis: 840 mm, travel distance Z-axis: 425 mm, Auction of a production line with robot and two workpiece palletizers! TECHNICAL DETAILS X-axis travel: max. 840 mm Z-axis travel: max. 425 mm Feed diameter: max. 200 mm Spindle speed: 6,500 rpm Workpiece palletizer capacity: 24 workpiece carriers Number of main spindles: 2 Number of tool turrets: 2 Number of tools per turret: 12 MACHINE DETAILS High-pressure pump: up to 120 bar per line Machine weight: 8,000 kg Cooling: spindle and machine bed cooling EQUIPMENT Robot M6iB Workpiece shuttle system by Heilig Automation with 2 pick-up stations High-pressure pump up to 120 bar per line Redpeyap Najfx Adrew Chip crusher Workpiece palletizer with a capacity for 24 workpiece carriers

Condition: excellent (used), Year of construction: 2016, 3x MACHINES : GM20CNC YEAR : 2016 Rodpovcmfaofx Adrew DESCRIPTION: Machine with original NC Gildemeister SIEMENS SINUMERIK CNC 840D - CN slide station 4 and 5 - CN hydraulic pick-up, advance, rotation, stop - Double slide pos 6, - Mechanical cutting slide Fxtillqon - CN rework slide + 2 indexing tools - Micrometric slide pos3 - Central block control - 25 mm passage KNOLL HP + FILTRATION + COOLING pump type: FKA/2550 Dnj0ed KNOLL pallet chip conveyor Loader : - IEMCA PRA 52/38P

Condition: used, Year of construction: 2006, Used INDEX MS 32 C lathe Equipment: -2 NCU -SIR MS32P with shelves, length 3300 mm, screwed rails -Counter spindle -KNOLL complete with 1 HP pump -Bar stop control -Programmable inputs/outputs -4 tool breakage checks -1 NCU1 and 3 NCU2 rotary tool drives -1 WTO stroke doubler, 3 positions, motorized on station 1 -2 drilling units with 6044 motor sold with the machine. -Transmit Rodpfx Ajxgh Eledrsw Equipment listed below with : CNC axis: 1.1 XZ 1.2 Z 2.1 Z 2.2 XZ 3.1 XZ 3.2 XZ 4.1 XZ 4.2 XZ 5.1 XZ 5.2 XZ 6.1 XZ 6.2 XZ