Used multi spindle machines for sale (196)

Condition: ready for operation (used), Year of construction: 1994, We offer a Kummer K90D, which is ideal for production operations. The machine is equipped with a loading and unloading gantry and a corresponding sorting tray. Chjdpfx Aov Rpw Iei Nja

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 63 mm, rotational speed (max.): 3,750 rpm, overall weight: 6,800 kg, drilling depth: 63 mm, The machine comes complete with collets, holders, and other accessories! TECHNICAL DETAILS Max. turning length: 63 mm Max. drilling depth: 63 mm Max. workpiece passage: 26 mm Max. workpiece feed: 125 mm Spindle speed range turning: 236 - 3,750 rpm Spindle speed range thread cutting: 13 - 1,875 rpm Chedpoytf Ekjfx Ai Nja MACHINE DETAILS Required floor space: 7.16 x 2.3 m Height: 2 m Weight: 6,800 kg EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides 4 change gears for main and feed drive Service tools

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power Chsdjin Ub Topfx Ai Nja 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 39,445 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840C, number of axes: 12, This 12s Index MS42C was manufactured in 1998. It features a maximum bar diameter of 42 mm and operates with a fully automatic system, making it suitable for high-volume precision turned parts. The machine is equipped with a Siemens SINUMERIK 840C control system and AC servo drives, ensuring efficient performance. Consider the opportunity to buy this Index MS42C automation equipment. Contact us for further details. • Maximum bar diameter: 42 mm • Number of spindles: 6 • Spindle pitch circle diameter: approx. 320 mm Codpjyhf N Ejfx Ai Neha • Maximum spindle speed: approx. 5,000 rpm • Number of CNC axes: 12 linear axes (6 × X, 6 × Z) • Axis configuration: X/Z per spindle station • Control: Siemens SINUMERIK 840C (INDEX OEM integration) • Drive system: AC servo drives with SERCOS interface • Automation level: Fully automatic • Operating mode: Continuous production (24/7 capable) • Cooling: Central coolant system • Lubrication: Central automatic lubrication • Electrical supply: 3-phase industrial power • Installed power: approx. 70–75 kW (configuration dependent) • Machine construction: Rigid cast iron base • Typical materials: Steel, stainless steel, aluminum, brass • Typical applications: High-volume precision turned parts

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,971 h, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840C, number of axes: 12, This 12s Index MS42C multi-spindle turning machine was manufactured in 2002. It features a maximum bar diameter of 42 mm and a spindle speed of approximately 5,000 rpm, making it suitable for high-quality turning capabilities. Consider the opportunity to buy this Index MS42C multi-spindle turning machine. Contact us for further details. • Maximum bar diameter: 42 mm • Number of spindles: 6 • Spindle pitch circle diameter: approx. 320 mm • Number of CNC axes: 12 linear axes (6 × X, 6 × Z) • Axis configuration: X/Z per spindle station • Control system: Siemens SINUMERIK 840C (INDEX OEM) • Drive system: AC servo drives with SERCOS interface • Automation level: Fully automatic • Cooling system: Central coolant system • Lubrication system: Central automatic lubrication Csdpeyhpgusfx Ai Nsha • Installed power: approx. 70–75 kW • Typical materials: Steel, stainless steel, aluminum, brass

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,500 rpm, travel distance X-axis: 130 mm, overall weight: 4,500 kg, number of axes: 4, This 4-axis MURATA Muratec MD 120 was manufactured in 2009. A CNC 2-spindle, 2-turret precision lathe with FANUC FS31i – Model A control, it features a max turning diameter of Ø 120 mm and a max turning length of 75 mm. Spindle speeds reach up to 4,500 rpm, and it includes a chip conveyor. If you are looking to get high-quality turning capabilities, consider the MURATA Muratec MD 120 machine we have for sale. Contact us for more information. Cedjx D Rdlspfx Ai Noha • Axes: 4 (X1, Z1, X2, Z2) • Distance between spindles: 340 mm • Max turning diameter: Ø 120 mm • Max turning length: 75 mm • Turret tools: 2 × 10 driven positions Additional equipment • Chip conveyor • Integrated loader: 2 loading stations; loader travel X-axis (Left 200 mm / Right 1,600 mm), Y-axis 550 mm, Z-axis 155 mm

Condition: used, Year of construction: 2000, Technical details: number of spindles: 6 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2000 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm pick-up unit, Spindle drum with hirth coupling, Elbaron oil mist filter, Codsyqwviepfx Ai Njha sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 2012, operating hours: 0 h, condition: new, machine/vehicle number: 01312012-5, 7 axes simultaneous, control Fanuc 32i-A Manufacturing origin Taiwan Voltage 400/50/3 Netweight 2400 kg Custom position 8458.11 20 Dimensions 2605 x 1420 x 2150 mm TECHNICAL DATA : - max turning dia of main spindle 20 mm - max turning dia of sub spindle 20 mm - max turning length (fixed guide bush) 200 mm - max turning length (rotary guide bush) 85 mm (option : 150 mm) - max turning length (non guide bush) 45 mm - max drilling capacity of main spindle 10 mm - max drilling capacity of sub spindle 10 mm - max tapping capacity of main spindle M8 - max tapping capacity of sub spindle M8 - max cross drilling capacity 10 mm - max cross tapping capacity M6 - number of external turning tools 8 pcs - number of internal turning tools 5 pcs - number of cross drillings 4 (option : 7) - face tool holder (sub spindle) 4 pcs - size of tool 12 x 12 x 90 mm - number of axis controls 7 (X1/Y1/Z1/X2/Z2/C1/C2) - bore of spindle 29 mm - spindle speed range 200 ~ 8000 t/min - rapid traverse X / Z 24 m/min - main spindle motor 3.7 kW - sub spindle motor 2.2 kW - motor axis X1 / Z1 0.5 / 0.75 kW - motor axis Y 0.75 kW - cross drilling motor 0.75 kW - end drilling motor 0.75 kW - motor axes X2 / Z2 0.5 / 0.5 kW - coolant motor 0.375 kW - power requirement 15KVA errors and omissions excepted data gived without obligation Inventory nr. 1120009, standard accessories Spindle servomotor External tool holder (8-tool) Internal tool holder (5-tool) Parts catcher Tools & toobox Lighting device Non guide bushing holder Cutting coolant (pump 4T6-6) Lubrication device Operational manual Pressure pushing shank 2 sets Guide bushing x 1 (TD-25S type 16°) Cedpfx Ajd Hr Imoi Neha Collet chuck x 2 (TF-25 type 16°) Side drilling tool holder (7 tools) Sub-spindle Part conveyor Double C axis Fixed drilling tool holders for sub-spindle x2 Drilling and milling tool holder for sub-spindle External turning tool holder for sub-spindle Sub-spindle tool holder for 4-position excentric end drilling Cutting coolant inspection Formal CE Fixed guide bush holder (TD-25 S type 16°) Chip conveyor with cart Transformer Coolant chiller High pressure coolant blocks

Condition: used, Year of construction: 2001, Technical details: number of spindles: 6 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Codpfjyqvlvox Ai Nsha Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2003, Technical details: number of spindles: 6 spindle passage: 36 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Cedpfx Aeyqpqxji Njha Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=36mm!!! Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images; various collets are included in delivery up to D36mm Please, contact us for getting more information and pictures on mail(at) or *

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 43, turning diameter over cross slide: 32 mm, number of spindles: 6, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Swing diameter over cross slide: 32 mm Max. spindle speed: 3,150 rpm Number of spindles: 6 Round bar capacity: 32 mm Square bar capacity: 22 mm Hexagonal bar capacity: 27 mm Max. bar feed: 125 mm Max. travel long slide: 100 mm Maximum number of parts: 35 Machining speed: from 1.12 s to 125 s Spindle speeds: from 200 rpm to 3,150 rpm Number (steps): 49 Machining time: from 0.63 s to 200 s MACHINE DETAILS Voltage: 50 Hz, 3x 380 V Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 3,850 x 1,390 x 2,200 mm Weight: approx. 8,000 kg EQUIPMENT Chedpfoyybcajx Ai Nsa Knoll AE 1114 high-pressure system Filtration system 5-bar and 40-bar pumps individually adjustable for processing stages Plate heat exchanger Lifting pump for chip conveyor

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: bar feeder, chip conveyor, A rebuild was carried out by Index for €380,000! Cjdpfx Aijyx Tzrj Nsha EQUIPMENT Prepared as a double 3-spindle machine Part pick-off device Thread cutting gearbox Cucci Giovanni integral loader Brankamp tool breakage monitoring and tool monitoring Cucci Giovanni bar feeder (2015) Knoll chip conveyor (2015)

Condition: repair required (used), 3x SCHÜTTE SF40 offered as a package at a low price – machines require overhaul Chodpfx Aeylhp Nsi Noa

Condition: used, 2x 6-spindle bar automatics as a package Codpfx Asylhlqji Noha Make: INDEX Model: MS25E (1 machine defective, used as a parts donor)

Condition: excellent (used), Year of construction: 2012, Fanuc 18iTB control Main spindle clearance 42 mm 6 axes Front horizontal slide designed as cross slide (X1/Z1) Z2 turret slide including: 6-position turret, IKZ, turret disk can be swiveled on both sides Cedpeuldfljfx Ai Noha Rear horizontal slide X2 Two vertical slides X3 and X4 10 tool positions available Chip conveyor Bar feeder SAMECA

Condition: ready for operation (used), Year of construction: 2005, operating hours: 68,410 h, functionality: fully functional, machine/vehicle number: 4903-0234, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Placing a bid constitutes an obligation to collect the item by the deadline of 15/11/2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2007: Listing ID A20303190 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 TECHNICAL SPECIFICATIONS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. bar key width for hexagonal material: 36 mm Max. bar side length for square material: 29 mm Max. bar stroke in one station: 130 mm Max. bar stroke in two stations: 260 mm Max. stroke radial slides: 52 mm Radial slide adjustment, fore/aft: ±20 mm Max. stroke axial slides: 72 mm Max. rapid traverse speed: 9.6 m/min Max. stroke tool spindles: 120 mm Adjustment, fore/aft: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated power main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Chodpfxsxnxnys Ai Nea Operating hours: 68,410 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2011, operating hours: 40,724 h, functionality: fully functional, machine/vehicle number: 8018030323B, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Submitting a bid obligates you to collect the item on time, no later than 15.11.2025! The following machines are also being sold exclusively via auction at the same location: Gildemeister GM 42-6, year 2005: Search ID A20302860 Gildemeister GM 42-6, year 2004: Search ID A20303020 Gildemeister GM 42-6, year 2007: Search ID A20303190 Gildemeister GM 42-6, year 2005: Search ID A20303220 Gildemeister GM 42-6, year 2007: Search ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of cross slides: 4 Number of tool spindles: 6 Number of tool stations: 12 Max. bar diameter for round stock: 42 mm Max. bar AF for hex stock: 36 mm Max. bar side length for square stock: 29 mm Max. bar feed per station: 130 mm Max. bar feed across two stations: 260 mm Max. radial slide travel: 52 mm Radial slide adjustment, fwd/rev: ±20 mm Max. axial slide travel: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle travel: 120 mm Adjustment, fwd/rev: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Csdpoxnxkhjfx Ai Neha Rated power main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 40,724 h EQUIPMENT Bar feeder (length: approx. 3000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2007, operating hours: 57,860 h, functionality: fully functional, machine/vehicle number: 4903-0261, The submission of a bid obligates the buyer to collect the item by the deadline of 15.11.2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Chodpexnxqbjfx Ai Nsa Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2007: Listing ID A20303190 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 TECHNICAL DETAILS Maximum turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of cross slides: 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round stock: 42 mm Max. across flats for hexagonal stock: 36 mm Max. side dimension for square stock: 29 mm Max. bar stroke at one station: 130 mm Max. bar stroke at two stations: 260 mm Max. travel of radial slides: 52 mm Radial slide adjustment, forward/backward: ±20 mm Max. travel of axial slides: 72 mm Max. rapid traverse speed: 9.6 m/min Max. travel of tool spindles: 120 mm Adjustment, forward/backward: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated power of main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 57,860 h EQUIPMENT Bar feeder (length: approx. 3,000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2005, operating hours: 69,287 h, functionality: fully functional, machine/vehicle number: 4903-0238, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Placing a bid obligates you to collect the machine by the deadline of 15.11.2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, year 2004: Search ID A20303020 Gildemeister GM 42-6, year 2011: Search ID A20303110 Gildemeister GM 42-6, year 2007: Search ID A20303190 Gildemeister GM 42-6, year 2005: Search ID A20303220 Gildemeister GM 42-6, year 2007: Search ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. bar width across flats for hexagon material: 36 mm Max. bar width across flats for square material: 29 mm Max. bar stroke in one station: 130 mm Max. bar stroke in two stations: 260 mm Max. stroke radial slide: 52 mm Radial slide adjustment, fore/aft: ±20 mm Max. stroke axial slide: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle stroke: 120 mm Adjustment, fore/aft: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main Motor Rated power: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 69,287 h Chsdpfoxnxapsx Ai Noa EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2004, operating hours: 46,942 h, functionality: fully functional, machine/vehicle number: 4903-0208, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Submission of a bid obligates the buyer to collect the item on time, no later than 15/11/2025! The following machines will also be sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2007: Listing ID A20303190 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 TECHNICAL DETAILS Chjdpfx Aexnxgpsi Nea Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of cross slides: 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round stock: 42 mm Max. across flats for hexagonal stock: 36 mm Max. width for square stock: 29 mm Max. bar feed per station: 130 mm Max. bar feed over two stations: 260 mm Max. radial slide travel: 52 mm Radial slide adjustment, forward/backward: ±20 mm Max. axial slide travel: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle travel: 120 mm Adjustment, forward/backward: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main Motor Main motor rated power: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 46,942 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2007, operating hours: 55,585 h, functionality: fully functional, machine/vehicle number: 4903-0266, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Placing a bid obliges you to collect the machine by the deadline of 15.11.2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. bar across flats for hexagonal material: 36 mm Max. bar side length for square material: 29 mm Max. bar stroke at one station: 130 mm Max. bar stroke at two stations: 260 mm Max. radial slide travel: 52 mm Radial slide adjustment, forward/back: ±20 mm Max. axial slide travel: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle stroke: 120 mm Cjdpfxsxnxm Ae Ai Noha Adjustment, forward/back: 10 mm MACHINE DETAILS Dimensions & weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated output of main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank volume: 750 L Operating hours: 55,585 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Further accessories

Condition: used, Year of construction: 1997, Technical details: number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 8,6 t spindle drive motor: 11 kW Csdpewl Nm Defx Ai Neha

Condition: used, Year of construction: 2019, Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2019 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot make HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on or Chedpfx Aieldk R Ho Nsa *

Condition: used, Year of construction: 2016, Article: CNC-controlled multi-spindle automatic lathe Csdpfx Aisldk R Re Neha Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2016 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 3 x Y-axis, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot, manufacturer HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on or *

Condition: used, Year of construction: 1999, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF20 S Dnt Yob: 1999 Six-spindle automatic lathe with 6 main spindles max. nominal diameter: D=20mm Spindle drum hirth coupled, CNC cross slide in positions 4, CNC cross slide in positions 5, pick up in position 6, sorting chute, 1x independent feed, thread cutting couplings, Chjdpex Sx Nhsfx Ai Nsa workpiece belt, Coolant tank with hinged belt chip conveyor Ruez, Oil/steel operation, PLC Siemens S7, Siemens CNC control, Siemens Simodrive 611, The scope of delivery regarding the tooling equipment could be different like pictures. Interface for: IEMCA PRA bar loading magazine (optional: IEMCA PRA40/31/ built in 1997 rear loader) *