Used mounting technology for sale (133)

Condition: used, Year of construction: 1998, short loader Dkedpfx Asvvuu Njc Neh bar diameter 12-72 mm

Year of construction: 2023, condition: ready for operation (used), A fully automatic SPEA bed-of-nails in-circuit tester for SMEMA production lines is available. Type: inline ICT tester, slots: 2x768/Core, conveyor width range: 50mm-380mm, conveyor length: 450mm, resistance measurement range: 1mΩ-1GΩ, capacitance measurement range: 0.5pF-1F, inductance measurement range: 1µH-1H, dimensions X/Y/Z: approx. 900mm/1000mm/1750mm. Including various feeders (8x2-56). Documentation available. An on-site inspection is possible. Dodpfx Acsxghn Hj Njkh

Condition: used, Year of construction: 2016, Machine in good operational condition and always serviced by the OEM (yearly maintenance). Machine available end January 2026.  Dkedpfxjxfrx Ts Ac Noh Magazines/Feeders also available - please look at the picture for the list.

Condition: ready for operation (used), Year of construction: 2011, Working condition and comes with a PC. Dsdjxcvqbjpfx Ac Nskh

Year of construction: 2019, condition: used, Operational condition. Djdpfxewcghyj Ac Nokh Ask for additional information!

Year of construction: 2014, condition: used, Machine in working condition. Was recently decomissioned. Dodswd Ex Topfx Ac Nekh 4MP camera with T21 resolution and 42x42mm field of view Oblique view – "Chameleon Colour" module Extended inspection area in X-direction to 670mm 2D barcode reader from below

Year of construction: 2024, condition: ready for operation (used), Operational condition machine. Can be bought as full SMT line. Ask for additional information! Djdpfx Ajwtytkjc Nekh

Condition: used, Year of construction: 2011, Preheating: 4 zones at the bottom • Heating Section: 1,650 mm • Active Cooling Section: 800 mm (2-stage from above) • Chain Pin Transport System: 5 mm pin length with center support • Transport Speed: 0.2 - 2.0 m/min (Realistic for BF products: 0.5 - 0.6 m/min) • Working Width: 50 - 500 mm • Electronic Control: For width adjustment and center support • Clearance Height: +35 mm / 25 mm • Inlet & Outlet Length: 700 mm each • Condensate Management / Process Gas Cleaning in cooling zone • Automatic Chain Lubrication • ERSAsoft and EPOS Basic Module • Inline Compatible • SMEMA Compliant • Transport Height: 940 - 965 mm Available from end of Q2 2025. Ask for additional information! Dkjdpfx Asv Sy Rujc Njh

Year of construction: 2009, condition: not inspected (used), Reflow oven in operational condition. R to L configuration with SMEMA. Dkodpfx Asvfp Nmsc Noh Ask for additional information!

Condition: like new (used), Year of construction: 2022, Ex demo unit. Like new condition. Ask for additional details! Djdpfx Asw Dtgrsc Njkh

Condition: used, Year of construction: 2006, -Spray fluxer Dedpfswcf Raex Ac Nekh -2x medium-wave preheating cassettes -1x dynamic preheater -1x bottom convection preheater -Dual wave with chip pre-nozzle + ERSA Power Wave - Cooling unit at the outfeed -Synchronous code reading system upstream of the soldering system -Roller buffer at the outfeed -Motor-driven infeed conveyor with chain Ask for additional information.

Year of construction: 2017, condition: ready for operation (used), Reflow oven in operational condition. Ask for additional information. Located within EU. Dsdpew Hfp Rofx Ac Nekh

Year of construction: 2020, condition: used, Machine in operational condition. Number of feeders 8 mm – 46 pieces (20 in front, 26 from the back); Feeders: 8/12/16/24/32 mm, vibratory feeders; Number of mounting heads – 4 pieces; Mounting accuracy – 0,01 mm; Drivers – servomotors Panasonic + ball screw + linear axes X/Y; Video recognition – synchronous on 4 heads; Modes – manual, semi-automatic, automatic; Max placement speed – 8000 comp/hour; Actual placement speed – 4000 – 5000 comp/hour; Max axis movement Z – 20 mm; Max dimensions of the PCB: 480х300 mm; Mounted components – from 0402 to 45х45 мм, LED, QFP, BGA step outputs ≥ 0,3 mm; Max component height (Z) – 5,5 mm; Dsdpfewtynnsx Ac Nskh Monitors – 15″; OS – Win7; Programming – data conversion, step by step, visual; Power supply – 1 phase, 220 V, 50 Hz, 750 W; Pneumatic pressure – 5 – 6 Bar; Machine dimensions – 1095x1165x1400 mm; Machine weight – 450 kg; Quick release connector: Ø 10 mm. Ask for further information!

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Inline + Dispense Preparation including 6 CLM Feeders Dkodpfx Aew Ewfzec Nsh Operational machine!

Condition: used, Year of construction: 2008, Machine in operational condition, however due to its age, sold without warranty. Dkjdpfewnfbvjx Ac Neh Ask for additional details!

Condition: used, Year of construction: 2021, Machines in operational condition! Dodpewcrthofx Ac Nekh Ask for additional information!

Condition: used, Year of construction: 2012, Operational condition! Dksdpswcrvpefx Ac Njh Ask for additional information!

Condition: used, Year of construction: 2014, Machine in opertional condition. Dodpfxowlfaye Ac Nokh Working times 2014-2018 only 1 shift, 2018-2022 stored, 2022-2023 in 3 shifts, 2023- stored. Ask for additional information!

Year of construction: 2017, condition: ready for operation (used), Machine in good working condition! Dksdpov T T Agefx Ac Njh Ask for additional information!

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell Djdpfxjfz Nb To Ac Nokh The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Ask for specification! Dedpfxjw Ty Hco Ac Nokh

Condition: good (used), Year of construction: 2016, functionality: fully functional, Please provide us with your offer price. Dsdpfx Acow Dfqpj Nskh Sale only within Europe (EU), including Turkey; United Kingdom, Switzerland. Technical data can be found in the handout. No packaging; any warranty rights are excluded. If you intend to dismantle the system yourself, please indicate this in your offer. We do not assume any liability for the accuracy of the technical data, for the completeness of accessories and tooling, nor for compliance with all safety and environmental protection requirements as stated in the accident prevention regulations.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: Nr. 291, used inline automatic 3D solder paste inspection system (AOI) for SMT. Fault description: Error in solder paste printing. Year of manufacture 2013 used inline automatic 3D inspection system (AOI) for assembled PCBs. Faults: Component misplacement, bent pins, etc. Multiple units available. Years of manufacture 2013–2016 ----- Please quote your offer price. Sale only within Europe (EU), including Turkey, the United Kingdom, and Switzerland ----- Technical specifications according to handout. No packaging; any warranty rights are excluded. If you intend to dismantle the equipment yourself, please indicate this accordingly in your bid. We assume no liability for the accuracy of the technical data, for the completeness of accessories and tooling, Djdpfxsw Dfh Ie Ac Njkh or for compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: Zeile 270, used inline automatic 3D X inspection system (AOI) for assembled PCBs. Defect types: misalignment, bent pins, etc. Multiple units are available, manufactured between 2013 and 2016. ----- Please indicate your offer price. Sale only within Europe (EU), including Turkey, United Kingdom, and Switzerland. ----- Technical specifications can be found in the handout. Dodpfxswzv Ito Ac Njkh Without packaging; all warranty rights are excluded. If you intend to dismantle the equipment yourself, please mention this in your offer. We make no guarantees regarding the accuracy of technical data, completeness of accessories and tooling, or compliance with all safety and environmental protection requirements as outlined in accident prevention regulations.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: Nr. 011, used inline automatic 3D solder paste inspection system (AOI) for SMT. Error pattern: Defective solder paste printing. Multiple machines available, year of manufacture 2011 – 2015. used inline automatic 3D inspection system (AOI) for populated PCBs. Fault types: Misplaced components, bent pins, etc. Several machines available, year of manufacture 2013 – 2016. Please submit your offer price. Sale only within Europe (EU), incl. Turkey, Great Britain, and Switzerland. Technical specifications can be found in the handout. Sold without packaging; any warranty or guarantee is excluded. Dedpfxowzv Adj Ac Njkh If you intend to dismantle the system yourself, please mention this in your offer. We do not assume any liability for the correctness of the technical data, for the completeness of accessories and tooling, or for compliance with the safety and environmental protection requirements specified in accident prevention regulations.