Used Sine Wave Ruler for sale (427)

Condition: as good as new (ex-display), machine/vehicle number: MCC101A260T7E00B, Manufacturer: Danfoss Djdpfx Aszw Enxsiiocp Product type: VLT MCC 101 sine-wave output filter Type code: MCC101A260T7E00B Part number: 130B4125 Input/output voltage: 3 × 525–690 V Rated current: 260 A at 50 Hz Rated current: 246 A at 60 Hz Rated current: 195 A at 100 Hz Frequency: 50/60 Hz Maximum output frequency: 100 Hz Switching frequency: 2 kHz Inductance: 480 µH Capacitance: 198 µF Power loss: 1,300 W Protection class: IP00 / open chassis Maximum ambient temperature: 45 °C Weight: approximately 315 kg Serial number: 000168-423 Made in Germany CE and UL marked The Danfoss VLT MCC 101 sine-wave filter is designed for installation on the output side of a frequency converter. It suppresses the switching-frequency component and provides a near-sinusoidal motor voltage, reducing stress on motor insulation and bearings as well as audible motor noise. Suitable for industrial high-power drive applications and use with compatible Danfoss VLT frequency converters. Condition: Surplus unit. Please refer to the photographs for the actual condition and scope of supply. The buyer is responsible for verifying compatibility with the intended frequency converter, motor and application.

Condition: used, GBS Prüfpuls rev3 Pulse generator for long-term insulation tests The Prüfpuls unit is designed for long-term insulation tests on test specimens with a capacity of up to 6 nF. Converter for high-voltage test transformer · Internal sine wave generator: 50-200 Hz. · Pulse width modulation 16-24 kHz of the sine wave via a full bridge. · Converter voltage adjustable from 0-600 V, Imax = 2.6 A, maximum power 1.3 kW · Pulse current limitation 110 A (shutdown threshold) Pulse transformer – drive Dsdpfx Aju Egz Roiijcp · Drive via a full bridge · Full-bridge power supply adjustable from 0-1000 V, 1.3 A max. · Pulse current limitation 100 A (shutdown threshold). · Pulse width 20-120 μs, nominal 94 μs, adjustable · 2 selectable series inductances 150 μH, 300 μH, to adjust the pulse width or rise times to the load capacity and voltage. · Pulse repetition frequency 0.1 – 2.5 kHz, adjustable. · Polarity: Adjustable to positive, negative, or alternating, depending on the polarity of the sine wave signal. · Cosine-shaped pulse at the transformer output Pulse transformer cascade · Output transformers in a 5-stage cascaded circuit. · Total turns ratio selectable as 1:7.7, 1:10, or 1:15 via taps. · Maximum output voltage 15 kV with possible load capacities of: * 6 nF with a pulse width of 73 μs at a repetition frequency of 2.5 kHz * 10 nF with a pulse width of 103 μs at a repetition frequency of 1.25 kHz · Voltage divider 1:1000 in parallel. · Overvoltage protection at approx. 20-23 kV by parallel spark gaps · Thermistor for over-temperature detection in the 1st transformer stage. · Earth-side current measurement socket 100 mV/A. Breakdown detection, testing · If the maximum bridge currents for the transformer drive or the maximum currents of the bridge power supplies are exceeded, the high voltage is switched off. · The device has a resettable operating hour counter to determine the test time. Manufacturer's price approx. €59,500 More items - new and used - can be found in our shop! International shipping costs on request!

Condition: refurbished (used), Year of construction: 2024, operating hours: 250 h, functionality: fully functional, machine/vehicle number: 325, type of input current: three-phase, total length: 1,300 mm, year of last overhaul: 2026, working width: 900 mm, tank capacity: 60 l, total width: 400 mm, total height: 1,200 mm, overall weight: 550 kg, This is an older version of the FD440 with a tray height of 33 mm (new machines are 50 mm). The machine is fully overhauled. The new model's price is 36,900 EUR. The machine comes with a 28m3 oil rotary vacuum pump from Edwards. Dcjdeyut Hrepfx Aiisp Extraction capacity: 60 kg The new model can be found here.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: Serial No.57/19, total length: 9,370 mm, total width: 2,900 mm, total height: 3,890 mm, overall weight: 4,490 kg, input current: 83 A, input frequency: 60 Hz, type of input current: AC, input voltage: 400 V, power: 50 kW (67.98 HP), workpiece weight (max.): 300 kg, We offer this used Neptun MASTER WAVE HP 2800 glass washing machine, manufactured in 2019. Wave HP 2862-80 HD Neptun’s heavy-duty vertical glass washer is designed for intensive use, with corrosion-resistant components and extensive use of AISI 304 stainless steel. It handles glass up to 80 mm thick and 300 kg per linear metre, including float, acid-edged, coloured, printed and pyrolytic glass. Inlet conveyor The 3,200 mm inlet conveyor has motorised rubber rollers, bevel-gear transmission and stainless-steel shafts. Sensors detect glass thickness and dimensions for PLC control. Its independent drive pauses incoming sheets during thickness changes until the machine is clear and adjusted. A foot pedal allows heavy sheets to be loaded while the conveyor is stopped and the rest of the machine continues running. Prewashing and washing A separate 400 mm prewashing module isolates prewash water from the main wash. Without a closed-circuit tank and pump, water consumption is 1,200–2,400 l/h. Three washing circuits use three pairs of 160 mm brushes with 0.30 mm bristles. High-density front brushes have inverter-controlled speed. Separate overhead motors drive front and rear brushes. Each circuit includes a 900 µm inlet filter, a 300 or 150 µm cartridge filter, a stainless-steel immersion pump and a drain valve. The first two circuits have independently controlled heating up to 50°C. A separate rinsing circuit sprays both glass faces. Water management Water flows from the final circuit towards the first tank. Specified water limits are conductivity below 150 µS, salts below 80 mg/l, chlorides below 30 mg/l, hardness below 6°f and no iron. Demineralisation is required where these limits are not met or for insulating-glass production. Programmable preheating and automatic tank draining/refilling prepare the machine for the next shift. Rinse-tank conductivity control regulates demineralised-water input. Flowmeters display circuit flow and trigger cleaning alarms for filters or nozzles. Drying and energy saving The sound-insulated drying section uses one set of air knives, automatically positioned to suit glass thickness. Belt transport avoids roller contact after rinsing. SmartSpeed sets separate speeds for washing/drying and final trailing-edge drying. Stated fixed-speed performance applies to glass up to 10 mm without holes or notches; thicker glass or glass with holes or notches may require slower drying. Ecosave® automatically reduces drying airflow and energy demand when glass is absent. The source quotes savings of up to 41%, with a separate Ecosave Full example claiming 60% under the specified glass-size and spacing conditions. Dcedpe Ah Hgzofx Aiiep If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, mileage: 110,685 km, power: 132 kW (179.47 HP), first registration: 10/2019, fuel type: diesel, empty load weight: 5,880 kg, overall weight: 7,200 kg, wheelbase: 3,750 mm, fuel: diesel, color: white, emission class: euro6, Equipment: ABS, air conditioning, cruise control, onboard computer, soot filter, Special features - 6-speed manual transmission - Electric windows - Radio - ABS / ASR - Differential lock - Air conditioning - Power steering Dcjdpfjxwlr Rsx Aiiep - Central locking - Rear view camera - 6 new tires - New windscreen Superstructure Aerial work platform France Elevateur 172 CPL - Working height: 17.4 m - Maximum outreach: 10.3 m - Basket load: 265 kg / 2 persons 220V power outlet in the platform - Turret rotation: 400° - Maximum working inclination: 5% - Maximum tilt: 15% - Steel boom with 2 telescopic sections - Articulated jib with 180° pendulum motion - Cable duct integrated into the telescopic boom - Electrohydraulic and sequential controls - Remote control in cab - 4 hydraulic outriggers - Tilt alarm - Plastic work basket (1000 V insulation) - Priority electrohydraulic emergency controls - Road position return light in cab - Hour meter - Emergency pump - Sine wave inverter 2500VA - Basket dimensions: 1300 x 780 x 1150 mm The aerial work platform, mounted on a very stable 7.2-ton truck, is especially suitable for safe operation on telecommunications networks, public lighting maintenance, telecommunication lines, or facade work. This is an especially robust vehicle with numerous additional features and equipment. The platform from France Elevateur allows work at heights of up to 17.4 m and a lateral outreach of up to 10 m. A 220V socket in the work basket enables connection of various power tools such as drills, lamps, or measuring devices. The vehicle is equipped inside with a workshop setup including drawers, cupboard and workbench for secure storage of tools and small parts. All functions of the access platform have been checked in our workshop and are fully operational. The vehicle is ready for registration. Included in the price are German registration documents, TÜV inspection, and UVV safety inspection. Additional equipment such as a tow bar, lighting, shelving, and further options are available on request. The vehicle is now available at our location in Langenfeld. ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles we offer are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. All presentations use only original photos taken at our own premises – thus we guarantee full transparency concerning the actual condition of the vehicle. Our vehicles undergo comprehensive preparation before sale in our own specialist workshop – including mechanics, bodywork and painting. Thus, they are optimally prepared for the next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good – control is better: On request, your vehicle can be inspected by independent testing organizations such as TÜV, DEKRA, or KÜS – also as part of a remote inspection. Our service for you: Delivery of your vehicle to your desired location Complete processing of export formalities, including export license plates Individual financing and leasing offers Trade-in of your current vehicle Installation of special equipment on request

Condition: used, mileage: 69,026 km, power: 96 kW (130.52 HP), first registration: 07/2017, overall weight: 3,500 kg, wheelbase: 3,682 mm, gearing type: mechanical, emission class: euro6, Equipment: ABS, airbag, cruise control, electric window regulation, onboard computer, Features - Radio - Power steering - Electric windows - Electric immobilizer - Central locking with remote control - On-board computer - Rear view camera - Anti-lock braking system (ABS) - Traction control system (ASR) - Pneumatically sprung driver's seat from ISRI - Ladder holder Structure France Elevateur 142 TPFc aerial work platform - Working height: 13.8m - Lateral reach: 7.3m Dodpey Sydaofx Aiijcp - Platform load capacity up to 265kg - Remote control - Engine start/stop function - Emergency pump - Hour meter - 2 x A-outriggers - Work platform (L/W/H) 1300 x 700 x 1190 mm - Swivel angle 400° - Platform arm rotation angle 140° - One-hand joystick proportional control of hydraulic movements in the work platform - 2 x 60° platform rotation, electric - Acoustic tilt sensor - Flashing lights - 230V connection in the platform - Sine wave inverter 2500VA - Electro-hydraulic control - Plastic work platform (1000 V insulation) The Renault Master with France Elévateur 142 TPFc is the ideal solution for companies that perform work at height. The France Elévateur aerial work platform, model 142 TPFc, offers a working height of up to 14 meters as well as a lateral reach of up to 7 meters, thus enabling safe and efficient access for maintenance and repair work. Thanks to the electric and hydraulic control as well as the integrated power converter, the vehicle can be used in a wide range of applications. The shortened superstructure ensures high maneuverability – ideal for use in cities, on construction sites and in narrow streets. Perfectly suited for telecommunications companies, municipal utilities, electricians and painting companies. Robust, reliable and compact – the Renault Master with aerial work platform combines mobility and functionality in an ideal way! All functions of the aerial work platform are fully functional and have been checked in our workshop. The vehicle is ready for registration. German vehicle documents, TÜV (technical inspection) and UVV (accident prevention) inspection are included in the price. Additional equipment such as a trailer hitch, lighting, shelving systems and other options are available on request. Available immediately from stock in Langenfeld! ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. The presentation is done exclusively with original photos, which were taken directly in our company – this guarantees full transparency regarding the actual condition of the vehicle. Before sale, our vehicles undergo a comprehensive refurbishment in our own workshop – including mechanics, bodywork and paintwork. They are thus optimally prepared for the next technical inspection. In addition, we guarantee the authenticity of the stated mileage. Trust is good – control is better: On request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA or KÜS – also as part of a remote inspection. Our service offer for you: Delivery of your vehicle to the location of your choice Complete handling of all export formalities, including export license plates Individual financing and leasing offers Trade-in of your current vehicle Installation of special equipment on request

Year of construction: 2025, operating hours: 150 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 103, This is prototype of the 570 series model, it has been completely refurbished. It has 96 trays at 60x40 cm and full temperature control on each tray. It has an extraction capacity of 25kg/hr. The machine will be delivered and mounted on location including one week of introduction by out technician. Dcjdpfxeyut Hxj Aiisp

Condition: used, power: 100 kW (135.96 HP), first registration: 06/2019, fuel type: diesel, empty load weight: 2,380 kg, overall weight: 3,500 kg, Special features - 3 seats - Driver’s seat with armrest - Daytime running lights - Radio - Rear-view camera - Electric windows - Electric exterior mirrors Dedpfxsxnkhfs Aiiscp - Air conditioning - Power steering - On-board computer - Central locking with remote control - Airbag - Multifunction steering wheel - 3.5t towing hitch Body - LED interior lighting - Partition wall - Tool shelves - Power inverter 12V to 220V pure sine wave 3600W - Work surface - Wardrobe - Storage shelves Workshop van equipped with very stable, lightweight wooden shelving (plywood board). New TÜV inspection Immediately available – Langenfeld We are happy to assist with financing arrangements. ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles All vehicles offered by us are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is exclusively with original photos taken directly at our premises – guaranteeing full transparency regarding the actual vehicle condition. Before sale, our vehicles undergo comprehensive reconditioning in our own specialist workshop – covering mechanics, bodywork, and paint. This ensures optimal preparation for the next technical inspection. We also guarantee the accuracy of the stated mileage. Trust is good – verification is better: Upon request, the vehicle can be inspected by independent organizations such as TÜV, DEKRA, or KÜS – including remote inspections if required. Our range of services for you: - Delivery of your vehicle to your chosen location - Complete processing of export formalities, incl. export plates - Individual financing and leasing offers - Trade-in of your current vehicle - Installation of special equipment as requested Looking for something specific? If you cannot find the right vehicle for your business in our inventory, please contact us – we are happy to assist. For technical details, further photos, or a personal consultation, we are at your disposal at any time. All prices quoted are net prices. The contents of our website are created with the utmost care and are regularly updated. Nevertheless, they serve only for general information and do not replace individual consultation. Only the information provided in the purchase contract is binding. Subject to alterations, errors, typos, and prior sale.

Condition: like new (used), operating hours: 349 h, functionality: fully functional, input voltage: 400 V, input current: 1,037 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP00, year of last overhaul: 2026, continuous power: 630 kW (856.56 HP), Equipment: type plate available, Exact model designation: Schneider MX eco 4V630 Output power and output current: 630kW | 1188A ME4C63AAA ° With test certificate! ° Only 349 motor operating hours - according to the manufacturer, over 100,000 possible! ° Easy operation thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included ° 2 additional control cabinets with various components tailored to the inverter included (buying drive without extra components possible) The following additional components are installed (see pictures): ° 2 pcs. RFI 480/600-TN (RFI filters) ° 2 pcs. NH fuse switch disconnectors, size 3 | I = 630A ° 2 pcs. ABB AF580-30 | I = 800A (Power Contactor) Dcedpfxex U Dvrj Aiiop ° 2 pcs. ABB AG09083735 (Circuit Breaker) ° SMF 480/1200 | 1200A (Sine Wave Motor Filter) ° 2 pcs. ABB AF750-30 | I = 1050A (Power Contactor) Only 1 unit left in stock! This item has been reset to factory settings and is therefore in its original condition as delivered by the manufacturer. Please refer to the original product images for the item's visual condition. Fully functional and ready for immediate use.

Condition: like new (used), Like-new, uninterruptible power supply for server, network, automation, and industrial applications. Rack-mountable Smart-UPS with line-interactive technology, sine wave output, and integrated network monitoring. Manufacturer: APC by Schneider Electric Type: UPS Model: SMT750RMI2UC Series: Smart-UPS Condition: like new Dcjdpszduvfofx Aiijp Form factor: 19-inch rackmount Rack units: 2U UPS technology: Line Interactive Rated power: 750 VA Real power: 500 W Input voltage: 230 V AC Input voltage range: 151–302 V AC adjustable Output voltage: 230 V AC Configurable output voltage: 220 V / 230 V / 240 V Input frequency: 50/60 Hz automatic detection Output frequency: 50/60 Hz Output waveform: Pure sine wave Switchover time: 6 ms typical Switchover time: 10 ms maximum Output connections: 4 × IEC C13 Input connection: IEC C14 Interfaces: USB Interfaces: Serial Interfaces: SmartConnect Expansion slot: SmartSlot Display: Multifunction LCD Automatic voltage regulation AVR Surge protection: 459 J Battery type: Lead-acid Battery charging time: approx. 3 hours Typical battery lifespan: 4–6 years Replacement battery: APCRBC123 Noise level: 42 dB(A) Height: 86 mm Width: 432 mm Depth: 409 mm Weight: 16.6 kg Color: Black

Condition: used, This listing is for the APC Back-Ups CS 500 UPS The unit is in full working condition and is ready for immediate use Dcedpfx Aexv Duzeiijp Key Specs & Performance Capacity: 500 VA / 300 W – suitable for basic PC setups, modems, routers, or low-power peripherals Runtime: ~2.4 minutes at full 300 W load ~13.8 minutes at half load (150 W) Topology: Off-line (standby) UPS with ~6 ms transfer time Waveform Output: Stepped approximation to a sine wave Connections & Interfaces Input Connection Type: IEC 60320 C14 Output Connection Types: 3 × IEC 60320 C13 (Battery Backup + Surge Protection) 1 × IEC 60320 C13 (Surge Protection Only) 2 × IEC jumper surge-protected outlets Number of Cables: 2 included Data-Line Protection: RJ-11 phone/fax/DSL line Communication Ports: USB + optional RS-232 Management Software: Supports APC PowerChute Personal Edition Battery & Power Battery Type: Sealed lead-acid maintenance-free (VRLA) Battery Cartridge: APC RBC2 Battery Recharge Time: ~8 hours User-replaceable: Yes, hot-swappable Battery Life Expectancy: 3–6 years Cold-Start Capable: Yes Self-Test: Automatic periodic testing Surge & Safety Features Surge Energy Rating: 300–310 J Noise Filtering: Full-time EMI/RFI filtering Audible Alarms: Yes – for battery use, overload, low battery LED Indicators: Status display panel Certifications: CE, VDE, GOST, C-Tick Resettable Circuit Breaker: Included Physical Characteristics Height: 16.5 cm Width: 9.1 cm Depth: 28.4 cm Net Weight: 6.03 kg Color: Beige/Light grey (typical for CS series) Noise Level: Approx. 40–45 dBA

Condition: used, et ETSYSTEM Electronic Load GPIB Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, providing an ideal testing solution for UPS, AVR, and D/A inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series has its own control and display panel, and a 5-status recall/memory, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measuring device test function provides a quick diagnosis of test results for production and QC test throughput. Features Voltage, current, watt, and VA variable display. Dcjdpfxjzd Uh Ij Aiiep CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit meter display for voltage, current, watt, and VA. Suitable for sine, square, and step waves. Width 600 mm, height 1506 mm, depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Huda Technology HUD-G809 Drop Shock Test System The system is also suitable for testing batteries. Max load: 100 kg Table size: 500 mm x 600 mm Peak impact acceleration range (half-sine wave): 150 - 6000 m/s² Pulse duration (half-sine wave): 0.5 - 30 ms If the pulse duration is less than or equal to 3 ms, the tolerance for peak acceleration is ±20%; the tolerance for pulse duration is ±15%. If the pulse duration is greater than 3 ms, the tolerance for the waveform should comply with the range specified in the standard. Velocity tolerance: ±15% Hydraulic brake prevents secondary impact. Overall table dimensions: 1000 x 750 x 2450 mm Weight: 3600 kg Power consumption: 5.5 KVA Dodpfxezikb Ie Aiiocp 380V ±10% AC 50 Hz Condition: used (We reserve the right to make changes and correct typing errors in technical data and specifications!) If you have any other questions, we would be happy to answer them by phone.

Condition: used, This listing is for the Schneider Electric APC Smart UPS RT2000 Dcedpfx Asxv Dywoiiep The unit is in full working condition and is ready for immediate release The APC Smart-UPS RT 2000VA is a rackmountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load.

Condition: used, This listing is for the Schneider Electric APC Smart RT2000 UPS Dodsxv D Hqjpfx Aiiocp The unit is in full working condition and is ready for immediate release The APC Smart-UPS RT 2000VA is a rack mountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load.

Condition: used, mileage: 68,972 km, power: 120 kW (163.15 HP), first registration: 06/2019, fuel type: diesel, overall weight: 4,500 kg, wheelbase: 3,682 mm, color: white, gearing type: mechanical, Equipment: onboard computer, power assisted steering, Special features - ABS, ASR - Radio - Cruise control - Power steering - Driver's seat with armrest - Electric windows - Electronic immobilizer - Central locking with remote control - On-board computer - Parking assist Superstructure France Elevateur 152 TPF Aerial Work Platform - Working height: 14.8 m - Lateral outreach: 8.3 m - Basket capacity up to 265 kg - Slewing angle 400° - Articulating basket arm 140° - 2 x 60° basket rotation Dcodpfoy Dfxmsx Aiijp - 2 hydraulic outriggers - Plastic work basket (1000 V insulation) - Indicator light for transport position in the driver’s cab - Emergency pump - Operating hours meter - Engine start/stop function - Sine wave power inverter 2500 VA - 230V socket in basket - Single-handed joystick proportional control for hydraulic movements in the work basket - Audible tilt alarm - Flashing beacons The Renault Master is equipped with a professional aerial work platform from the manufacturer France Elevateur, model 152 TPFcc. This platform offers an impressive working height and allows safe and efficient access to elevated areas for maintenance or repair work. All functions of the lift are fully operational and have been inspected by our workshop. The vehicle is ready for registration. German documents, TÜV and UVV certification are included free of charge. Additional features such as trailer hitch, lighting, shelving, and more are available upon request. Available immediately at our branch in Langenfeld. ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. The presentation is exclusively with original photos taken in-house – ensuring full transparency regarding the vehicle’s actual condition. Our vehicles undergo thorough reconditioning in our own specialist workshop before sale – including mechanics, bodywork, and painting. They are thus optimally prepared for their next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good – control is better: On request, the vehicle can be inspected by independent inspection organizations such as TÜV, DEKRA, or KÜS – also as a remote inspection. Our service offer for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export license plates - Individual financing and leasing offers - Trade-in of your current vehicle - Installation of special features as requested Looking for something specific? If you can’t currently find a suitable vehicle for your business in our stock, just contact us – we’ll be happy to help. For technical details, more photos, or a personal consultation, please contact us at any time. All prices stated are net prices. The contents of our website are created with the greatest care and updated regularly. Nevertheless, they are for general information purposes only and do not replace individual advice. Only the details contained in the purchase contract are binding. Subject to change, errors, typing mistakes, and prior sale.

Condition: used, machine/vehicle number: 9208, mileage: 193,180 km, power: 107 kW (145.48 HP), first registration: 05/2018, fuel type: diesel, maximum load weight: 460 kg, overall weight: 3,500 kg, tire size: 225/65r16c, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, onboard computer, Special features: - ABS, ASR - Air conditioning - Radio CD, AUX, BLUETOOTH - Cruise control - Airbags - Power steering - ISRI driver's seat with armrest - Electric windows - Electric immobilizer - Central locking with remote control - On-board computer - 4 new tires - Ladder holder up to 6m Superstructure: KLUBB K32 aerial work platform - Working height: m - Lateral reach: m - Platform for 2 people, up to 200 kg - Rotation: 360° - 2 x A-frame outriggers - Remote control for the platform - Engine start/stop function - Electric emergency pump - Hour meter - 220V connection in the platform - Converter 12V - 230V - 2Kw sine wave KLUBB K32 aerial work platform from the French manufacturer, mounted on a Renault Master - the hydraulic pump with magnetic clutch is driven by a V-belt connected to the vehicle engine. An optimal product for telecommunications and electrical companies, as well as municipal utilities and painting companies. All functions of the lift are operational and have been inspected by our workshop. The vehicle is ready for registration. German documents, TÜV (technical inspection) and UVV (accident prevention regulations) are included free of charge. Additional equipment such as a trailer hitch, lighting, shelves, and more are available upon request. ACR-Juretzki Commercial Vehicle Trading GmbH – Your reliable partner for used commercial vehicles. All vehicles offered by us are the property of ACR-Juretzki Commercial Vehicle Trading GmbH. The presentation is exclusively done with original photos taken directly in our facility – this guarantees full transparency regarding the actual condition of the vehicle. Before sale, our vehicles undergo a comprehensive refurbishment in our own workshop – including mechanics, bodywork, and paintwork. They are thus optimally prepared for the next technical inspection. In addition, we guarantee the authenticity of the stated mileage. Trust is good, control is better: Upon request, the vehicle can be inspected by independent inspection organizations such as TÜV, DEKRA, or KÜS – also as part of a remote inspection. Our service offer for you: - Delivery of your vehicle to the location of your choice - Complete handling of export formalities, including export license plates Djdpfx Aeiwimijiiocp - Individual financing and leasing offers - Trade-in of your current vehicle - Installation of special equipment on request Are you looking for something specific? If you cannot find a suitable vehicle for your company in our inventory, please contact us – we will be happy to help. We are available at any time for technical details, additional photos, or a personal consultation. All prices quoted are net prices. The content of our website has been created with the utmost care and is regularly updated. However, it serves exclusively for general information and does not replace individual advice. Only the information in the purchase contract is binding. Subject to change, errors, typos, and prior sale.

Condition: used, PLC control, line filter, line filter -Manufacturer: Siemens -Type: Simodrive 6SN 1111-0AA01-2EA0 -Line filter: for regulated feed -Power: 80 kW -Sine wave operation block current operation Dcjdpfedkk T Tox Aiisp -Dimensions: 275/200/H480 mm -Weight: 23.1 kg

Condition: used, machine/vehicle number: 9208, power: 107 kW (145.48 HP), overall weight: 3,500 kg, fuel type: diesel, tire size: 225/65r16c, color: white, mileage: 193,180 km, first registration: 05/2018, maximum load weight: 460 kg, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, onboard computer, Features - ABS, ASR - Air conditioning - Radio CD, AUX, BLUETOOTH - Cruise control - Airbag - Power steering - ISRI driver's seat with armrest - Electric windows - Electronic immobilizer - Central locking with remote control - On-board computer - 4 new tyres - Ladder rack up to 6m Superstructure Aerial platform KLUBB K32 - Working height: m - Lateral outreach: m - 2-man basket up to 200kg - Rotation: 360° - 2 x A-frame outriggers - Remote control for the basket - Engine start/stop function - Electric emergency pump - Hour meter - 220V socket in basket - Inverter 12V - 230V - 2kW sine wave KLUBB K32 aerial work platform from the French manufacturer KLUBB, mounted on a Renault Master - hydraulic pump driven by a magnetic clutch via a V-belt powered by the vehicle’s engine. An ideal solution for telecommunications and electrical companies, as well as municipal utilities and painting contractors. All functions of the aerial platform are operational and have been inspected by our workshop. The vehicle is ready for registration. German documents, TÜV (roadworthiness certificate) and UVV (safety inspection) are included free of charge. Additional equipment such as tow bar, lighting, shelves, and more can be optionally installed upon request. ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles. All vehicles offered are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is made exclusively with original photos taken in-house, ensuring full transparency regarding the actual vehicle condition. Our vehicles undergo comprehensive reconditioning in our own specialist workshop before sale – including mechanics, bodywork, and painting. Thus, they are optimally prepared for the next technical inspection. We also guarantee the accuracy of the specified mileage. Dedpjwyn Ngefx Aiiecp Trust is good – but verification is better: On request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA or KÜS – including remote inspection options. Our service offering for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export registration plates - Custom financing and leasing offers - Trade-in of your current vehicle - Installation of special equipment as requested Looking for something specific? If you do not currently find a suitable vehicle for your company in our stock, please contact us – we will be happy to assist you. For technical details, further photos, or a personal consultation, we are always at your disposal. All prices quoted are net prices. The contents of our website have been prepared with the utmost care and are regularly updated. Nevertheless, they serve purely for general information and do not replace individual advice. Only the terms specified in the sales contract are binding. Changes, errors, typing errors, and prior sale are reserved.

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. Dcodpfx Aisy N Rlvjiep The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: used, This listing is for a Powervar UPM UPS Power Supply . The unit is in full working condition and is ready for immediate release. The Powervar UPM UPS is a power conditioned, sine-wave uninterruptible power supply designed to provide clean, conditioned power free from noise, voltage spikes, and common-mode disturbances. Key Features: Power Rating: The Powervar UPM UPS has a power rating of 1440VA/1296 Watts. Inverter Waveform: The UPS produces a low distortion sine wave output. Transfer Time: The transfer time is 4 ms. Frequency: The typical frequency is 60 Hz. Dsdpfoxxy Uijx Aiiecp Efficiency: The online efficiency (without charger) is 91%. BTU/Hr: The UPS has a BTU/Hr rating of 459. THD: The total harmonic distortion (THD) with 100% resistive load is not specified. Protection Features: Surge Diverter: The UPS is equipped with a surge diverter to protect against high-voltage surges. Noise Filter: The UPS has a built-in noise filter to reduce electromagnetic interference (EMI). Low-Impedance Isolation Transformer: The UPS features a low-impedance isolation transformer to provide fully conditioned isolated power. Ground Guard Technology: The UPS is designed with Ground Guard technology to prevent ground loops and eliminate the need for special dedicated-isolated electrical circuits.

Condition: used, functionality: fully functional, Sine table with electromagnetic clamping plate Djdpfx Ajz Rwbvsiijcp 600x250x150 mm including control unit for 230 V (alternating current)

Condition: used, machine/vehicle number: 8308, mileage: 191,919 km, power: 158 kW (214.82 HP), first registration: 04/2018, fuel type: diesel, overall weight: 11,990 kg, tire size: 245/70R17.5, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: air conditioning, airbag, central locking, differential lock, electric window regulation, onboard computer, power assisted steering, Special features - Electric windows - Radio - ABS / ASR - Rearview camera - Differential lock - Air conditioning - Power steering - Central locking - Fog lights - Air-suspended driver’s seat Superstructure France Elevateur 192 CPM Aerial Working Platform - Working height: 19 m - Lateral outreach without outriggers: 7.5 m - Lateral outreach with outriggers: 11.8 m - Basket load: 265 kg / 2 persons With 220V power socket With compressed air connection 2 water connections: one with 24V electric pump, 2.7 bar; the other a high-pressure connection with petrol-powered pump, 200 bar. - Tower rotation: 400° - 4 hydraulic outriggers and 2 hydraulic rear axle stabilizers - Maximum operating inclination (slope): 5% - Maximum lateral inclination: 15% - Fully insulated fiberglass basket (1000 V) Dodpfx Aioy Av N Teiscp - Steel boom with 2 telescopic sections - Articulated pendulum arm 180° - Emergency operation (remote control) in the cabin - Inclination alarm (tilt sensor) - Basket rotation: 2 x 90° - Operating hours counter - Emergency pump Body features - Tool shelves - Stainless steel water tank 200l - Sine wave inverter 2500VA - Quick coupling for compressed air - Vice - 220V socket Renault D12 with France Elevateur 192 CPM aerial platform, mounted on a 12-ton truck, suitable among others for the facade cleaning industry. The basket is equipped with a high-pressure water pump, petrol-engine driven, 200 bar, as well as a second water connection with 24V electric pump, 2.7 bar. There is also a compressed air connection in the basket. All functions of the aerial platform are fully operational and have been checked by our workshop. The vehicle is ready for registration. German paperwork, TÜV, and UVV certificates are included free of charge. Additional features such as trailer hitch, lighting, shelving, and more are available upon request. ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles All vehicles we offer are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is exclusively with original photos, taken directly at our premises – ensuring full transparency regarding the actual condition of the vehicle. Prior to sale, our vehicles receive comprehensive preparation in our in-house specialist workshop – including mechanical, body, and paint work. This ensures they are optimally prepared for the next technical inspection. We also guarantee the authenticity of indicated mileage. Trust is good – inspection is better: On request, the vehicle can be inspected by independent organizations such as TÜV, DEKRA, or KÜS – also available as remote inspection. Our range of services for you: - Delivery of your vehicle to your chosen location - Complete processing of export formalities, incl. export license plates - Individual financing and leasing offers - Trade-in of your current vehicle - Installation of special equipment as required Looking for something specific? If you currently cannot find a suitable vehicle for your business in our inventory, please contact us – we are happy to assist you.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, The SW-320 is a good competitor for small-batch selective wave soldering machines. It is the most affordable machine and features a very modern programming method using a camera, drawings, and image importing. Easy maintenance, with nozzles that can be easily exchanged via a magnetic connection. SW-320YT L*W: 50×50～320×250 mm Substrate thickness: 0.8～3 mm Dcjdpfx Aijzzdhfeijp Pin length:

Condition: used, Inclined conveyor for moving product within a food processing line Dcedpfsz Ndpcjx Aiiop This conveyor has a stainless steel frame mounted on castors, making it easy to reposition on the work floor. The belt has raised, wave-shaped side skirts on both sides, which keep loose or irregular products on the belt while it runs at an incline. The drive and controls are housed in a compact box fitted to the side of the frame. The open frame design allows for straightforward cleaning, suiting the conveyor for use in a food processing environment. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Incline conveyor Belt: With raised wave-shaped side skirts and cleats Controls: Compact control box on the frame Construction: Stainless steel frame on castors, open design