Condition: excellent (used), Year of construction: 2015, - Travel X=3000 mm, Y=1500 mm, Z=1400 mm - Heidenhain iTNC 530 with handwheel HR 410 - NC rotary table for multi-sided machining 1600 mm x 1250 mm - 1-axis NC universal drilling and milling head, for simultaneous and positioning positioning operation (A-axis, 45°-axis) - Motor spindle 7,000 rpm max. SK 50, 530 Nm spindle torque - Tool changing system SK 50 / 40 places for 400 mm long tools tools - Chip screws in X-axis, optimum chip transport - Chip conveyor (hinged belt conveyor) for transverse conveying, Fabr. Knoll, front ejection - Coolant supply 950 l, made by Knoll - Outside/inside air at the spindle - IKZ 60 bar for deep hole machining Colowf Algjip E Umsrb - Operating mode 4 - Full enclosure with safety glass panes with sliding doors, optimized for crane loading - Split sliding doors on the front side - Split sliding doors on the operator side - RMP 60 radio measuring probe - incl. washing gun - Short delivery time by arrangement, subject to prior sale - Used machine - Z-axis KGT renewed in September 2023 incl. bearings - Optional fixators and tie rods - optional commissioning/installation - optional transportation

Condition: excellent (used), Year of construction: 2014, operating hours: 8,000 h, Functionality: fully functional, CNC controller: HEIDENHAIN TNC640 Celiov Eqqxop E Umorb Axes X-axis travel mm: 1.800 Y-axis travel mm: 1.800 Z-axis travel mm: 1.210 A-axis degrees: -15°+105° Rapid traverse m/min: 40 Worktable Table dimensions mm: ø1.400x1.200 T-Nut: 22H7 / 100 mm Swing clearance mm: ø 1.900 (limited up to 2.200) Max. workpiece weight kg: 5.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 63/73 (100/40% ED) Spindle torque Nm: 300/348 (100/40% ED) Cooling Cooling through the Spindle Center bar: 50 Tool system Tool holder: HSK-A100 Tool magazine slots: 92 Equipment Electronic Handwheel HEIDENHAIN HR410 Chip conveyor High pressure pump Collision monitoring HEIDENHAIN DCM Monitoring between the machine and the tool Direct measuring systems on all axes, HEIDENHAIN Rinsing pistol Automatic opening and closing door Spindle offset sensor Micro Epsilon Paper band filter system Blowing air through the center of the spindle, selected via M-function HEIDENHAIN HR550 FS, electronic handwheel with radio transmission Radio measuring sensor BLUM TC60 BLUM Novotest, laser tool setting and breakage control Oil and emulsion mist separator Machine running times Under power: 17.991 Spindle Working: 8.028

Condition: excellent (used), Year of construction: 2015, Siemens 840D solutionline with Celos V3 Main drive 12,000 rpm 44 kW / 288 Nm HSK100 60-position tool magazine Renishaw PP60 measuring probe 3D Quickset Celipswf Ad Ao E Umerb MPC Machine Protection Control Production package Scraper-belt chip conveyor with 600 liters 40 bar internal coolant supply plus external chip flushing Rotating disk Coolant ring nozzle Flushing gun Air blown through the spindle Operating mode Tool identification (Tool Dialog System TDS) Network service 4,600 spindle hours With 180 tools and all fixtures.

Condition: as good as new (ex-display), CNC ultra high pressure water jet cutting machine SAME /Bogacki - 2515 BA 2D -demonstration machine - travel: 2.550 x 1.550 x 200 mm Control system: BOSCH MTX Aquacut edition - CAD / CAM system - Operating PC with portable electronics. Handwheel incl. high pressure pump HB 50 incl. stainless steel working table ( 2.700 x 1.700 mm) incl. CE- safety device (light barriers) incl. splash guard (see pictures) incl. abrasive container (250 kg) Colip Esgq Nqbo Umjrb incl. abrasive cutting head Allfi incl. red light laser incl. drilling unit 4mm diameter receptacle ER 16 - few operating hours

Condition: good (used), Year of construction: 2007, Ref. -No.: 10525 Manufacturer: DMG Type: DMU 60 monoBLOCK Year of construction: 2007 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany - Japan Machine-No.: 115XXXXX X-Travel: 630 mm Y-Travel: 560 mm Z-Travel: 560 mm Cjlip Eswfy H Uj Umjrb Table Dimensions (Lengthxwidth): 1000 x 600 mm Tool Taper: SK 40 Tool Piece Magazine With: 24 Pcs./pcs. Turning Speeds: 12.000 RPM Rapid Traverse X-Axis: 30 m / min Rapid Travel Y-Axis: 30 m / min Rapid Traverse (W-Axis): 30 m / min Weight Of The Machine Ca.: 9 t Further information: - Measuring probe - Swivel head and rotary table - IKZ 50bar - 5-axis simultaneous machining Machines can be inspected under power by arrangement.

Condition: used, Year of construction: 2006, Technical details: x-travel: 1625 mm y-travel: 880 mm z-travel: 790 mm table surface area: 1675 x 890 mm table load: 2000 kg turning speeds: 12000 1/min tool taper: SK 40 control: ULTIMAX 4 tool change unit: 40 Pos. distance spindle /table: 150 - 910 mm spindle: 15 kVA total power requirement: 38 kVA weight of the machine ca.: 15,5 t dimensions of the machine ca.: 4,9 x 3,8 x 2,75 m 3-axis universal machining center, chipconveyor, internal coolant device 20 bar, coolant tank 600 liter incl. paper filter, el. handwheel, USB interface, LAN, DXF software, Colipjv I A Axe E Umerb Hours "machine on" approx. ? h *

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements width 3600 Measurements depth 3150 Measurements height 3410 Machine weight 7500 Control Unit Brand HAAS Main Drive Tool taper SK40 Number of axis 5 Movement X-Axis Movement 1016 mm X-Axis Working Feed 16.5 m/min X-Axis Rapid Traverse 22.9 m/min Y-Axis Movement 635 mm Y-Axis Working Feed 16.5 m/min Y-Axis Rapid Traverse 22.9 m/min Z-Axis Movement 635 mm Celip Eswfup Rj Umsrb Z-Axis Working Feed 16.5 m/min Z-Axis Rapid Traverse 22.9 m/min B-Axis Movement +120° to -35° B-Axis Working Feed 50°/s B-Axis Rapid Traverse 50°/s C-Axis Movement 360° C-Axis Working Feed 50°/s C-Axis Rapid Traverse 50°/s Table Min distance between vertical spindle and table 102 mm Max distance between vertical spindle and table 737 mm Tools Slots in storage 30 + 1 Max weight 5.4 kg Max tool diameter (Full / Secondary Positions Free): 63.5 / 127 mm Max tool length 305 mm Additional Equipment Rotary & Swivel Table with Scale Measuring System for Better Accuracy Intuitive, Wireless Touch Probe System from Renishaw Portable Control Panel with XL Touchscreen Blowing Out of the Spindle Cone with Every Tool Change Button to Manually Release the Tool Automatic Minimum Quantity Lubrication System for Axes and Spindle Air Conditioning for Cooling the Control Cabinet Flood Coolant System with Variable Pump Capacity External Coolant Tank with 208 Liter Capacity ca. 25 working hours This 5-axis HAAS UMC 1000 universal machining centre was manufactured in 2023. It features a Ø 635 mm table, SK40 tool holder, and a main spindle speed of 8,100 min-1. The machine supports a max. table load of 454 kg and includes a 30 + 1 tool magazine. Additional features include a Renishaw touch probe system, portable control panel with XL touchscreen, and HAAS CNC control. Consider the opportunity to buy this HAAS UMC 1000 universal machining centre. Contact us for more information. Application Types Milling

Year of construction: 2012, Condition: excellent (used), YASDA YBM Vi40 CNC jig boring machine / machining center machine in perfect condition incl. accessories (see photos) For the complete photo gallery: See attached PDF file (from page 4) TECHNICAL DATA Travels X-axis: 900 mm Y axis: 500 mm Z axis: 450 mm Distance from the table surface to the spindle tip: 100 to 550 °. Rotary table diameter: 400 mm Pallet loading capacity: 200 kg Table surface configuration: 44-M12 thread C axis: 360 ° Table tilt axis movement range (B axis): +- 110 ° Distance between center of tilt axis and rotary table: 0 mm Rotary axis (C axis): 100 rpm Max. rotation of the inclination axis: 20 rpm Cslip Ejpqx H Te Umsrb Motor for rotary axis: 4,2 kW Motor for inclination axis: 4,5 kW Spindle type: SA40-24`000-18,5 Spindle speed range: 100 - 24`000 rpm Spindle speed range programming: Programming by direct input of a 5-digit S-command Number of spindle speed ranges: 1 Type of spindle conical bore: HSK-63A Inner diameter of spindle bearing: 65 mm diameter Rapid traverse Speed: X,Y,Z axis: 20`000 rpm Feed rate: X,Y,Z axis: Max. 5000 rpm C-axis: 100 rpm B axis: 20 rpm Smallest input increment: 0.0001 mm/deg Automatic tool changer: 60 tools Selection method: Any selection Tool shank type: HSK-63 A Max. tool diameter Tool diameter: 100 mm Max. tool diameter Tool diameter at full setting: 70 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool balance weight: within G2.5 Machine dimensions: 3220 x 3885 x 3515 mm Machine weight: 15`000 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: good (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: HEIDENHAIN, total height: 2,440 mm, overall weight: 6,000 kg, spindle speed (max.): 18,000 rpm, space requirement length: 2,500 mm, space requirement width: 2,600 mm, CONTROLS Colip Eowfrzde Umorb .. CNC controls HEIDENHAIN WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 500 mm .. Y-axis travel: 420 mm .. Z-axis travel: 380 mm SPINDLE / HEAD .. spindle revolutions (max): 18000 /min .. tool fixture: HSK A63 AXIS DRIVES .. feed velocity (max): 20000 mm/min .. rapid traverse: 50000 mm/min TOOL MAGAZINE .. number of positions: 60 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2500 mm .. space requirements -front/back-: 2600 mm .. total height: 2440 mm .. total weight approx.: 6000 kg ATTACHMENTS .. zero-point workholding system: yes .. chip conveyor: yes .. coolant unit: yes .. band filtration unit: yes .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes Total spindle hours: 38800 hours. machine in production until April 2025 Control system overhauled in 2024

Condition: used, Year of construction: 2002, x-travel 3200 mm y-travel 800 mm z-travel 600 mm spindle taper SK40 Cjlip Eev S Irts Umsrb turning speeds 50 - 12000 U/min no. of workpieces in the magazine 30 Stück table surface area 3900 x 750 mm rapid travel x/y/z 12/12/12 m/min total power requirement 29 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 7200 x 3500 x 3100 mm CNC traveling column machining center Hedelius Furnishing: - HEIDENHAIN control TNC530 - chip conveyor - Coolant system 350 / 2.5 bar - Working area hood Machining values: - max. milling capacity: 600cm³/min - max. drilling Ø: 44 mm - max. thread Ø: M30 operating hours: - control on = 68283 hours - machine on = 67782 hours - program run = 20891 hours

Condition: good (used), Year of construction: 2010, Ref. -No.: 10524 Colswfy H Ieip E Umsrb Manufacturer: DMG Type: DMU 100 monoBLOCK Year of construction: 2010 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany - Japan Machine-No.: 116XXXXX X-Travel: 1250 mm Y-Travel: 710 mm Z-Travel: 710 mm B-Axis: 360 ° C-Axis: 0,001 ° Machine length: 3500 mm Machine width: 2650 mm Machine Height: 2700 mm Table Load: 800 kg Tool Taper: HSK 100 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 16.000 RPM Weight Of The Machine Ca.: 11 t Size Of Pallet: 1500 x 800 mm Further information: B-axis (-120° / +30°) NC rotary table integrated in fixed table Direct measuring system 3D probe infrared HEIDENHAIN TS 640 IKZ 40bar, 600l Flushing gun, chip conveyor 3D quickset software The machine is currently in production and can be inspected under power by prior arrangement.

Condition: used, Year of construction: 2007, Technical details: x-travel: 2500 mm y-travel: 920 mm z-travel: 820 mm table surface area: 3100X900 mm table load: 4,0 t control: 840 D powerline shopmill Siemens turning speeds: 20-10.000 U/min tool change unit: 80 Pos. rapid traverse: 50 m/min spindle: (40/100%ED) 48/32 kW max. torque on the spindle: 294 /196 Nm taper ISO: SK 50 total power requirement: 100 kVA weight of the machine ca.: 27 t dimensions of the machine ca.: 6,40 x 3,30 x 2,85 m 4 axis machining center, travelling column controlled milling head 1° indexing (B- axis), internal coolant supply 40bar, 600l coolant box, 3D touch probe, BLUM laser, chipconveyor, prepared for el. handwheel, prepared for dividing wall, prepared for NC-rotary-table appr. 36.000 h ( mainswich ON ) appr. 12.000 h (spindle ON ) Crolip Eswfrfvj Umeb *

Condition: good (used), Year of construction: 2001, operating hours: 26,500 h, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Heidenhain, total height: 3,000 mm, total length: 3,800 mm, total width: 3,600 mm, overall weight: 8,500 kg, spindle speed (max.): 16,000 rpm, operating hours of spindle: 24,000 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Control: HEIDENHAIN X-travel: 800 mm Y-travel: 600 mm Z-travel: 500 mm B-axis (table): 280 mm Table tilts +/-: 220 (+/-110) ° C-axis table rotates 360 ° Tool magazine: 30 Spindle mount: SK40 Spindle speeds - continuously variable: -16,000 rpm Large rotary table Rapid traverse speeds of rotary table: 36 rpm Integrated zero-point clamping system Internal spindle cooling 3D measuring probe: RENISHAW OMI-2 Chip conveyor Coolant system Extraction system Subject to prior sale Cslswg Dr Deip E Umsrb Optional accessories (not included in the price): Approx. 100 SK40 chucks 2 NCG quick-action clamps (125 mm) 2 Gressel quick release Raisers for quick release

Year of construction: 2005, Condition: excellent (used), MIKRON HSM 400 U high speed machining center The exact scope of the offer can be seen in the photo gallery. Included are among others: Measuring probe, oil mist separator, fire extinguishing system, chip conveyor, handling device, oil cooler, belt filter system, approx. 50 HSK tool holders etc. 1. TECHNICAL DATA Working area X axis: 400 mm Y axis: 450 mm Z-axis: 350 mm B-axis: +-110 ° C axis: 360 ° Working spindle Speed range: 100 - 42`000 rpm tool holder: HSK E 40 spindle power at 40 % ED: 13 spindle power at 100 % ED: 10 Torque at 60 % ED: 4,25 Torque at 100 % ED: 3,2 Lubrication: oil/air Feed rate Rapid traverse speed: Max. 40 m/min B axis: 150 rpm C axis: 250 rpm Axis acceleration, XYZ: Max. 1g (10 m/s2) B axis: 100 rad/s2 C axis: 300 rad/s2 Tool changer: 68-fold Chip to chip: 12.5 s Tool change time: 10,0 s Work table: 120 mm Max workpiece diameter that can still be rotated 360 °: 230 mm Max. Workpiece height: 350 mm Max. Workpiece weight: 25 kg Crslip Eoigrf Is Umeb Control: Heidenhain iTNC 530 Weight: 5500 kg For the correctness, completeness and topicality of the data we do not take over guarantee.

Condition: used, Year of construction: 2015, x-travel 630 mm y-travel 560 mm z-travel 510 mm b-axis -125/ +10 ° c-axis 360.000 x 0,001 ° control Fanuc G-Tech 31i table surface area Ø 500 mm turning speed range 12000 U/min max. torque on the spindle 167 Nm power capacity - milling spindle 11/ 7,5 kW internal coolant system feed 70 bar rapid traverse 40 m/min no. of tools in the magazine 90 Stück tool taper HSK 63 A | dimensions 2,3 x 3,65 x 3,0 m weight 10,5 t full 5-axis machining Center. First instalation in 2018 Equipment: - NC rotating and swiveling table - full covered - spindle cooling - chip conveyor - filtersystem Knoll and internal coolant - absolut scale Cjlip Eewfhqus Umjrb - coolant gun - 3D probe Renishaw OMP 60 incl."Easy Probe software" - Memory expansion to 8 MB - Matsuura Pivot Check - control for cutting power - Expansion of Macro Variables from 100 to 600 - 5- axis package (Al Nano Control, G54.2; TCPC....)

Condition: used, Year of construction: 2006, x-travel 760 mm y-travel 560 mm z-travel 560 mm control 840 D Powerline Siemens tool taper SK 40 numbers of tools in magazin 60 spindle turning speed - stepless 0- 12000 U/min size of pallet 630 x 500 mm total connected load 64,2 KVA feed stepless 20- 15.000 mm/min rapid traverse 50 m/min Crslip E Uswfhq Ujmsb total power requirement 26 kW weight of the machine ca. 12 t dimensions of the machine ca. 5,2 x 4,5 x 2,45 m 5 axes machining center with rotating table (C) and swiveling head (B). Machine has a pallet changing system with 2 pallets and an ATC with 60 positions. Machine has worked 20.000 spindle hours and was always well maintained.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10489 Manufacturer: DMG Type: DMC 60 U duoBLOCK Year of construction: 2011 Csliswfy Eqjp E Umerb Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 11XX000XX01XX Major overhaul: 2025 X-Travel: 600 mm Y-Travel: 700 mm Z-Travel: 600 mm B-Axis: -30 - 180 ° C-Axis: 0,00 ° Spindle Taper: HSK A63 DIN 69893 Max. Workpiece Weight: 600 kg Max. rotary table diameter: 630 O Table speed range: 40 min/-1 Tool Piece Magazine With: 60 Pcs./pcs. Turning Speed Range - Stepless: 20 - 18.000 RPM Max. Torque: 121 / 82 Nm Feed force (X / Y / Z): 10 kN Rapid Travel X/Y/Z: 60.000 mm / min Drive Capacity - Spindle Motor: 28 / 19 kW acceleration: 6 m/s² Total Power Requirement: 55 kW Weight Of The Machine Ca.: 12 t Dimensions Of The Machine Ca.: 7,0 x 5,0 x 3,2 m Numbers Of Pallets: 2 Size Of Pallet: 630 x 630 mm Tool change time: 3,7 s Further information: DMG DMC 60 U – 5-Axis Universal Machining Center (Year 2011) The machine is currently still in production and has been used exclusively for aluminum machining in single-shift operation. It is equipped with a pallet changer and a high-pressure cooling system (30 bar). In 2024, extensive maintenance and refurbishment work was carried out: ✅ All axes (except the Z-axis) were renewed ✅ Guideways were replaced ✅ Spindle was overhauled Maintenance and service reports, as well as all relevant documentation, are fully available. More technical Specifications: 🔹 Working ranges: Distance spindle center – table (horizontal): 20 – 620 mm Distance spindle center – table (vertical): 120 – 720 mm Distance spindle nose – table (horizontal): -150 – 550 mm Distance spindle nose – table (vertical): -250 – 450 mm Features & Accessories ✅ Complete documentation available ✅ Chip conveyor for efficient chip removal ✅ Cooling system with high-pressure cooling (30 bar) ✅ Internal coolant supply for optimal machining ✅ Pallet changer for uninterrupted operation ✅ Rotating sight glass for clear process visibility ✅ Renishaw OMP 60 probe for precise workpiece measurement ✅ Electronic handwheel for easy manual control ✅ Oil mist extraction for a clean working environment ✅ Paper band filter for effective coolant filtration ✅ Spindle oil cooler for temperature stabilization The machine can be inspected and tested under production conditions by appointment. 📍 Availability: Upon agreement

Condition: good (used), Year of construction: 2013, Without clamping devices! Working area X-Y-Z: 500 mm x 450 mm x 400 mm Crslipowfhlls E Umeb Digital swivel rotary table B and C axes (clamping surface D = 630 x 500 mm) Rotation range B (-50/+110°); C (360°) Direct X, Y, Z position measuring system Air purge Heidenhain TT140 tool measurement system Motor spindle 20-10,000 rpm 13/9 kW (40/100% duty cycle) Production package consisting of: -Internal coolant supply 40 bar -Scraper belt chip conveyor -Extended 360 l coolant tank -Coolant/air blast switch -Spray gun -Enclosed machine cabin (folding roof) -Signal light Electronic handwheel Heidenhain TNC 620 control system 30-station tool magazine SK 40 Infrared measuring probe HH TS 649 PROGRESSline & Planolight Package for increased ambient temperatures

Year of construction: 2010, Condition: excellent (used), Chiron FZ 08 KS MAG High Speed Plus Machining Center 1. TECHNICAL DATA Drilling capacity in steel: ⌀ 12 mm thread: M8 Milling capacity in steel: 30 cm3/min tool stations: 24 Spindle nose: HSK-A 40 Max. tool diameter: 47 mm / 100 mm Max. Tool length: 160 mm Max. Tool weight: 1.2 kg Chip to chip change time: 2.1 s Speed, main spindle: 30`000 rpm Max. Torque: 11 Nm Spindle power: 9 kW Off-bar package Speed: 8000 rpm Max. torque: 14,3 Nm Bar passage: 32 mm Bar feed, stroke: 460 mm X-axis: 450 mm Y-axis: 270 mm Z-axis: 310 mm Max. feed force / X and Y axis: 2000 N Max. feed force / Z-axis: 3000 N Rapid traverse (X,Y and Z axis): 75 m/min NC swivel head, swivel range: -20° / +115° Cjlip E Ujiy D Tmemsrb rapid traverse, B-axis: 60 rpm Floor space requirement: 2.3 m2 Weight: approx. 4000 kg For the correctness, completeness and topicality of the data we do not take over guarantee.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Operating hours: 67.452 H Further information: Colip E Uewfy Dyemerb Clamping table 900 x 630 mm Infrared measuring probe, chip conveyor, sheet metal technology, belt filter system, Interlit Type SK 200-760, oil mist separator, post tool holders, chip bucket, 2x wet benches, 2x 6 pull-outs, vice, jaw spreader 125 mm, tool presetter made by Kelch, Contents: Machine accessories 3x telescopic drawer cabinet, 2x 8/1x 5 drawers, Roller shutter cabinet, 1 door

Condition: good (used), Year of construction: 2014, Ref. -No.: 10462 Manufacturer: MATEC Type: 30 HVK Year of construction: 2014 Type of control: CNC Control: SIEMENS SINUMERIK Storage location: Halberstadt Country of origin: Germany Machine-No.: 14XX X-Travel: 1300 mm Y-Travel: 600 mm Z-Travel: mm B-Axis: 360 ° C-Axis: 360 ° Spindle Taper: HSK 63A Distance Spindle /Table: mm Table Load: 1.500 kg Max. Tool Length: 340 mm Max. Tool Diameter: 70 mm Max. rotary table diameter: 940 O Swivelling: 105 ° Table speed range: 800 min/-1 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 12.000 RPM Rapid Traverse: 30 m / min Weight Of The Machine Ca.: 9,5 t Tool change time: 3,5 / 6,5 s Colswfy A Neip E Umorb Further information: - Turning option (spindle lockable, table 800 rpm) - Head can be swiveled steplessly +-105° - Incl. Renishaw measuring probe - Incl. extraction HSK 63 spindle, 12000 rpm, newly overhauled! (max. 100h since overhaul!) Exchange of the spindle 12.2023 Hours: Drives on approx. 19000h Machine can be inspected under power. Universal machining center Matec-30 HVK (built in 2014) The universal machining center Matec-30 HVK from 2014 offers a powerful and precise solution for demanding manufacturing tasks. With its 3D and 5-sided machining capabilities, the machine is ideal for complex workpieces. The generous Z-axis enables the machining of workpieces with increased height, while the rotary table supports dimensions up to a swing diameter of 940 mm. Thanks to its versatility, the machine can also be used as a mill-turn center. Technical details and advantages: Built in 2014 Suitable for demanding 3D manufacturing tasks and 5-sided machining Extended workpiece height thanks to a generous Z-axis Rotary table with a swing diameter of up to 940 mm Optional use as a milling and turning center The Matec-30 HVK is a reliable and robust machine that offers high precision and flexibility even after years of use – a perfect solution for a wide range of manufacturing requirements.

Condition: good (used), Year of construction: 2013, Ref. -No.: 10450 Manufacturer: SHW Type: UNISPEED 5 Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 32XX X-Travel: 2000 mm Y-Travel: 2300 mm Z-Travel: 1300 mm B-Axis: 360 ° C-Axis: 360 ° W-Axis: 1500 mm Table Load: 15000 kg Max. Tool Weight: 25 kg Max. Tool Length: 500 mm Max. rotary table diameter: 1600 O Table speed range: 5 min/-1 Tool Taper: HSK 100 Tool Piece Magazine With: 150 Pcs./pcs. Turning Speed Range - Stepless: 22 - 8000 RPM Max. Torque: 40 Nm Feed Speeds X/Y/Z Axis: 2 - 30.000 mm / min axes: 5 Rapid Travel X/Y/Z: 30.000 mm / min acceleration: 2 m/s² Dimensions Of The Machine Ca.: 8,4 x 7,1 x 5,3 m Operating hours: 42.499 H Tool change time: 10 s Further information: automatic universal milling head, 360 x 1°; 180 x1° compact coolant system, make Knoll, type KF150/950 high pressure pump belt filter Crolip Eewfyz So Umsb coolant temperature control Blum laser measuring system Renishaw RMP 60M infrared measuring system 140 tool holders HSK 100 included Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10427 Manufacturer: OMV Type: MAV 412 Year of construction: 2000 Type of control: CNC Control: HEIDENHAIN TNC 426/430 Storage location: Halberstadt Country of origin: Italy X-Travel: 1200 mm Y-Travel: 850 mm Z-Travel: 800 mm B-Axis: +/- 95 ° C-Axis: 0,0001 ° NC swivel rotary table: 520 O Table Load: 3000 kg Cjlip Eowfyzxj Umerb Table surface: 2300 x 980 mm Tool Taper: HSK 63 Tool Piece Magazine With: 20 Pcs./pcs. Spindle Speed: 0 - 16.000 RPM Turning Speed Range - Stepless: 0 - 20.000 mm / min Drive Capacity - Spindle Motor: 26 kW Total Power Requirement: 36 kW Weight Of The Machine Ca.: 17 t Dimensions Of The Machine Ca.: 5,4 x 4,4 x 3,1 m Further information: Operating hours: 32500 h Spindle hours: 10000 h - IKZ (internal cooling) - Milling spindle overhaul: Motor winding, bearing, tool clamp (2022) - AXA FSB400 chip conveyor (year 2021) - Compressed air preparation renewed (2023)

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 600 Pcs./pcs. Spindle Speed: 20.000 RPM Max. Torque: 8.600 Nm Feed Speeds X/Y/Z Axis: 60.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm Colip Eowfyxqo Umjrb - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10286 Manufacturer: STARRAG HECKERT Type: HEC 1600 Athletic Year of construction: 2009 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 24139 X-Travel: 2800 mm Y-Travel: 2100 mm Z-Travel: 1900 mm Table Dimensions (Lengthxwidth): 2 x 1.250 x 1.600 mm Table Load: 8.000 kg Max. Tool Weight: 35 kg Crslip E Ujwfyxkemob Workpiece Diameter At Full Load: 110 mm Tool Piece Magazine With: 240 Pcs./pcs. Turning Speeds: 20 - 9.000 RPM Tool dimensions (with occupied adjacent spaces): 125 mm Rapid Travel X/Y/Z: 40.000 mm / min Weight Of The Machine Ca.: 35 t Numbers Of Pallets: 2 pallet change time: 60 s Further information: internal coolant supply