Used laboratory equipment for sale (685)

Condition: used, Year of construction: 2019, Manufacturer : ACS Instrument Model: 7400S Year : 2019 Type : Leak test bench / automatic and autonomous leak detector Application: Integrity test for flexible containers (flexible packaging, pouches, envelopes, etc.) EM delta P: +- 5000 Pa Bodpfsx R Dfxex Ab Ijwk Pressure test: -55 hPa to 950 hPa Motor power : 0,75 kW The cup is placed in a sealed enclosure. A vacuum is applied in the enclosure, causing the cup to inflate. The inflated cup is clamped between the two horizontal walls of the enclosure and exerts a force on the internal pressure sensor. The force exerted on this sensor is the image of the internal pressure of the cup. The leak test consists of measuring a variation in the force on the internal pressure sensor between the start and end of the stage. A touch screen for controlling and setting the instrument parameters. A USB key for exporting results. Documentation available

Condition: used, Year of construction: 1997, Manufacturer: Telstar Model: LPP1600 Year : 1997 (never used)   Bjdpox R Awgsfx Ab Iowk Material :Polished stainless steel Power : 2500 w 1 vertical box 1 horizontal box Flux placed across the width of the other box Control panel on 1 side 3 sides with straps 3 neon lights laminar flow surface 200 x 150 cm Height: 200 cm Overall dimensions 250 x 150 x 250 cm   Feet or suspension mounting required

Condition: used, Year of construction: 1992, Manufacturer : De lama Model: DLST/L Class 100 Year : 1992 Type: Dry heat oven for sterilisation and depyrogenation. Bsdpfxex Rz N Ue Ab Iswk   Volume: 1 m3 Materials : Polished stainless steel - Sterilisation (160 - 180°C): Reduction of micro-organisms and their by-products by up to 12 log - Depyrogenation (220-250°C): Destruction of pyrogens and endotoxins inside materials - Horizontal laminar flow - Double door (new) - Electric heating - 2 trolleys - Olympia/EXP3: Control, regulation, management and recording system with high-speed processor. Possibility of designing the oven to withstand operating temperatures of up to 300°C in continuous service, thanks to the use of HEPA filters with a special sealant. Main applications : - empty glassware (e.g. vials, ampoules, bottles) - stainless steel equipment (e.g. trays, machine parts) - moisture-sensitive materials - basic thermostable pharmaceutical products and chemical compounds - non-aqueous liquids (e.g. oils, glycerines, etc.)

Condition: used, Dissolution automaton in continuous flow Included : - CY7-50 piston pump - Dissolest CE70 - Splitter collector C615 - MS 70S splitter medium - USP4 standard Bwsdpfsx Rz Nuox Ab Iek + Documentation

Condition: used, Year of construction: 1993, Previous use: distilled water Bodpfx Asx Rz Nnjb Iswk Capacity : 100 L/H Material: glass Year : 1993 The unit includes : Level regulator Electrical control box Frame Pump Coil heat exchanger (1.2 bar max) Electric tank heater 5000W 200 litre glass tank Tubular exchanger (1.2 bar max) Photoelectric level Boiling chamber Stainless steel coil boiler: stainless steel 316 (1.2/1.5 bar max)

Condition: used, Year of construction: 2000, Sold for parts, ADU card missing. Automatic tablet testing system - Laboratory measuring equipment - Tablet tool Enables testing of: Hardness Diameter Thickness Weight Bwsdpfjx Rz I Dsx Ab Isk Precision balance Sartorius WZ64S Scale : 10 à 50 g Unit : mg / 0,5 mg / 0,1 mg adjustable Thickness Drive: stepper motor. Measuring principle: linear potentiometer. Unit of measurement: mm or inch. Tolerance: +/- 0.1 mm Hardness Drive: stepper motor. Measurement: load cell (lmz) Measurement principle: dynamometric gauge Unit: N, Kp or Sc Diameter Drive: stepper motor. Measuring principle: stepper motor. Unit of measurement: mm or inch. Scale: 3 - 18 mm / 3 - 30 mm (manual) Tolerance: +/- 0.1 mm Tension : 100 / 240 V, 50Hz / 60 Hz The UTS is a universal, fully automated testing system developed for use in industry. This tool is the approved model of a series of test systems that have been tested over many years. It was developed in close collaboration with the pharmaceutical industry. The UTS 4.1 can be used to test round, oval, square and oblong tablets, as well as many special shapes. For delicate oblong tablets, the proven oblong centring system (OZB) can be integrated. All parts requiring cleaning can be removed quickly and easily without any tools. The test system can be supplemented with various options, such as a distributor and/or sample collector with a different number of stations. Use the UTS as a laboratory tester or an online control device connected to a tablet press. Sampling can be triggered either in the production machine or using the TTS11 software.

Year of construction: 2003, condition: used, functionality: fully functional, OPTREL SEMI-AUTOMATIC INSPECTION MACHINE, MODEL PWL Semi-automatic inspection machine, ideal for small volumes and critical products requiring inspection. Particles and imperfections are visually inspected by an operator using a high-magnification lens and a brightness-adjusted setup. Built in 2003. Bwedpfxjycxayj Ab Iok CHARACTERISTICS - Wide product range (ampoules, vials and cartridges for injectable liquid products) - Change parts optimized for quick change over PRODUCTION - Output: 100 units/min - Working height: 900 ± 25 mm - Size: 2250 x 1750 x 2100 mm

Condition: excellent (used), Shimadzu Type: Prestige-21 / with AIM-8800 infrared microscope Shimadzu IR Prestige-21 infrared spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the areas of research and development. It is an excellent addition to the existing FTIR series, which covers the standard laboratory area, among other things. AIM-8800 specifications Optics: 15 x Cassegrain objective 15 x Cassegrain condenser mirror with inlet for flushing MCT detector: with liquid nitrogen monitoring system Bwjdpfx Abef I Ew He Isk Wavelength range: Type 1 - 5000 - 720 cm -1 Type 2 - 5000 - 650 cm -1 Electrically activated aperture XY Θ directional drive. The setting of the XY direction increments is 1 µm above the sample surface and 1° steps in the Θ direction (numerical input possible). Minimum setting value: 3µm Motor-driven XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30mm Resolution: 1 µm pitch Sample thickness: Reflection mode - ≤ 40mm Transmission mode - ≤ 10mm Operation via the keyboard of the main unit Measurement mode selection / XY stage operation (4-step speed control) / manual focusing / illumination control (Optional) Control via PC Measurement mode selection / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / Aperture setting / Aperture preview / Measurement position and aperture setting recording (10 sample positions, 2 background positions) Environmental conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W410mm x D540mm x H520mm x 36kg Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, This listing is for the Agilent 34970A Data Aquisition Switch Unit The unit is in full working condition and is ready for immediate release. Bedpox Szacsfx Ab Ijwk The Agilent 34970A Data Acquisition/Switch Unit is a modular test and measurement instrument designed for data logging, signal measurement, and flexible switching in lab, production, and automated test environments

Year of construction: 2015, condition: excellent (used), Clean Air Workbench Bodsiv S Agepfx Ab Ijwk Heraguard HPH 15 Thermo Scientific Used Location Cologne regularly serviced Laboratory resolution various microscopes and other equipment gladly

Condition: ready for operation (used), Temperature range: Ambient to 320°C Speed range: 100 – 2000 rpm Bwsdpfx Aex Rhudjb Ijk Max. stirring capacity H₂O: 10 L Plate dimensions: Ø 125 mm Plate material: Stainless steel Dimensions (WxDxH): 168 x 220 x 105 mm Weight: 2,4 kg Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), The Thermo ALPS 30 manual heat sealer effectively protects your samples from evaporation and contamination during PCR or sample storage. The ALPS30 manual heat sealer is ideal for sealing small batches of plates in low- to medium-throughput applications, and compact enough to fit conveniently on the bench without occupying excessive space. The Thermo microplate heat sealer makes it easy to protect your samples against contamination and evaporation. The Thermo ALPS 30 Heat Sealer is compatible with almost every height of microplates, blocks, and PCR plates. The ALPS30 can be used with a wide range of Thermo heat seals, such as pierceable, optically-clear and permanent seals to ensure the highest level of protection. Additionally, the Thermo microplate sealer is equipped with a built-in thermostat for precise temperature control and features an LED indicator light that signals when the device is powered on and heating. Key Features of the Thermo ALPS30 Heat Sealer: Benchtop Manual OperationBuy Used Thermo ALPS30 Heat Sealer. Adaptors Compatible with Most Heights of Microplates, Blocks, PCR Plates Compatible with Wide Ranfe of Thermo Heat Seals Pierceable Optically-Clear Permanent Seals Prevents Contamination Bwodpfx Absx Rhr As Ijk Prevents Evaporation Built-In Thermostat LED Indicator Light: Powered On & Heating

Condition: used, Condition fair but fully functional. The Seward Stomacher 400 Circulator is a benchtop paddle blender for sample homogenization (80-400mL), featuring adjustable paddle speeds (around 75-300 RPM), a digital timer (up to 99 min), and programmable settings, operating on various voltages (220-250V, 50/60Hz) with power usage around 170W; it's known for organism recovery with its circulator paddles but isn't cooled. Key Specifications Sample Volume: 80 mL (min) - 400 mL (max) Paddle Speed: 75 - 300 rpm (adjustable in 5 rpm increments) Timer: Digital, 0 seconds - 99 minutes, 59 seconds Bwodpfx Abjx Rhhqj Iek Dimensions (W×D×H): Approx. 33-33.7 cm (W) x 35.5 cm (D) x 27.9-30 cm (H) Weight: Approx. 23 kg (55 lbs) Power: 220-250V, 50/60Hz (voltage varies by model) Wattage: Around 170 W Bag Size: Uses 177 x 304/305 mm bags (Circulator style) Features Homogenization: Uses circulator paddles for improved recovery. Control: Digital display, manual/auto modes, programmable P1, P2, P3 settings. Safety: Stall condition & door open indicators. Not Cooled: Does not have a cooling feature.

Condition: used, This listing is for a Labnet Vortemp S2056A Shaking Incubator The unit is in full working condition and is ready for immediate release The Labnet Vortemp S2056A is a versatile shaking incubator designed for simultaneous heating and mixing of small samples. It is ideal for applications in biochemistry, microbiology, and clinical laboratories. Key features include: Interchangeable Platforms: Microplates: Accommodates up to 4 standard or 2 deep well microplates. Microtubes: Accommodates up to 56 x 1.5/2.0 mL tubes. Precise Digital Controls: Time: Precise digital control for accurate timing. Temperature: Temperature range of ambient +5°C to 60°C. Speed: Speed range of 200 to 1200 rpm. Mechanical Convection: Ensures uniform and stable heating throughout the incubation process. Cold Room Compatible: Suitable for sub-ambient applications, making it versatile for a wide range of laboratory settings. Construction and Operation Housing: Bodpfxsxv D Die Ab Iswk Constructed of steel plate coated with highly resistant polyurethane lacquer. The interior chamber is isolated with special thermal protection materials and insulation foam. Mechanism: The motor drives the eccentricity control mechanism, generating the orbital motion of the sample platform. The temperature and shaking mechanism are regulated via microprocessors for precise control

Condition: used, This listing is for the LABCOLD RLDF1520 Climatic Class 4 Refrigerator Bwedpfx Aboxhdtho Iok The unit is in full working condition and is ready for immediate use The LABCOLD RLDF1510 is a pharmacy / vaccine‑grade refrigerator designed for storage of temperature‑sensitive medicines, vaccines, or biological materials Some of its key specs and features: Feature Specification / Detail Capacity ~ 430 litres External Dimensions (H × W × D) 1860 mm × 600 mm × 700 mm Temperature Operating Range +2 °C to +8 °C (nominal operating ~5 °C) Control / Monitoring “IntelliCold™” controller, 24/7 temperature logging, alarms (high/low temp, door open, power failure) Insulation / Construction Enamelled steel exterior, corrosion‑resistant painted aluminium interior; fan‑assisted cooling; off‑cycle auto defrost Door Type Solid door (non‑glass) version Other Features Door lock with keys, access port for probe, remote alarm contacts, data storage (13 months) Power / Energy Use Often quoted ~ 5.52 kWh/24h (for a 440 L variant/related model) In short: this is a robust, regulated refrigerator intended for cold chain use (i.e. storage of medicines, vaccines, biologics) rather than for general domestic or food us

Condition: used, This listing is for the GE Healthcare (now Cytiva) GE Axicrom 140/500 The unit is in full working condition and is ready for immediate use AxiChrom is a family of large-scale, low-pressure chromatography columns made by GE Healthcare The “140/500” refers to a column with inner diameter (ID) 140 mm and bed height up to 500 mm (the “long-tube” version Bjdpexhdw Tjfx Ab Ijwk Typical Uses Process development, scale‑up trials, and small/full scale production of biomolecules (e.g. proteins, antibodies) in biopharma or biotech. As part of purification workflows where large volumes and high throughput are needed, but still under low pressure (i.e. not high‑pressure liquid chromatography)

Condition: used, This listing is for the J Engelsmann Jolting Volumeter STAV 11 with an Acoustic Hood The unit is in full working condition and is ready for immediate use Engelsmann Jolting Volumeter STAV 11) — a compact laboratory instrument used to assess the tamped density and volumes of bulk solids before and after compaction. The Jolting Volumeter STAV II, produced by J. Engelsmann AG, is a laboratory device engineered to measure the apparent (pre-compaction) and tapped (post-compaction) volumes of bulk materials—such as powders, granulates, and fibrous products—thus enabling calculation of tamped or tapped density Bodpoxhdynefx Ab Iowk Compliance with standards: Supports analysis in line with European Pharmacopoeia, DIN ISO 787 Part 11, ISO 3953, ISO 8967, and ASTM B 527-93 Adjustable tamping mechanism: Allows custom setting of the number of jolting strokes deviating from default programs Measurement cylinders: Compatible with a range from 10 ml to 1000 ml, with 250 ml typically standard; cylinders are interchangeable and secured via a strong retaining ring and gasket Ease of use and cleaning: Designed with a modern, rounded “soft design” that’s easy to clean and operate via a user-friendly display and control unit Optional accessories: Can be fitted with a sound-absorption hood for quieter operation

Condition: used, This listing is for the Labinco L295 Solubility Index Mixer Bwedexhd Hzspfx Ab Isk The unit is in full working condition and is ready for immediate use The Labinco L295 Solubility Index Mixer is a precision laboratory instrument specifically designed for accurately measuring the solubility of dry milk powder and other powdered substances under highly reproducible mixing conditions Key Features & Specifications Primary Use: Engineered for determining solubility of dry milk powders, as outlined in American Dry‑Milk Institute standard methods B 911 and B 913 (also referenced in DLG testing guidelines) . Precision Design: It operates with a powerful synchronous motor and a digital timer for consistent stirring, critical for reliable solubility index assessments indofa. Timer Range: Adjustable from as little as 1 second up to nearly 100 hours (99h 59m 59s) Special Mixing Vessel: Comes complete with a custom-designed glass mixing jar and precision impeller to ensure constant speed and repeatability Physical & Electrical Specs: Motor Power: Input ~60 W, Output ~55  Dimensions: 250 × 260 × 380 mm (W × D × H) Weight: Approx. 11.2 kg Power Options: Available in 230 V (Art. nr. 29500) or 115 V (Art. nr. 29510) variants Operating Conditions: Suitable for ambient temperatures of 5–60 °C, up to 80% relative humidity, and has an IP42 protection rating

Condition: used, This listing is for 1 Box Hamilton Microlab 600 series Accessories Bwedpoxhfbysfx Ab Ijk The units are in full working condition and is ready for immediate use

Condition: used, This listing is for the Big Neat. F3-XIT Safety Cabinet The unit is in full working condition and is ready for immediate use The Bigneat F3‑XIT is a benchtop powder weighing safety cabinet manufactured by Bigneat, tailored to protect operators from exposure to dust and particulates while handling and weighing fine powders. It features a compact footprint and excellent visibility through its acrylic enclosure, ideal for precision work. MedicalExpo DirectIndustry Key Features: Compact design with great all-around visibility, available in two access styles: F3‑XIT‑D: Hinged access flap. Bjdpfx Abjxhff Se Ijwk F3‑XIT‑S: Corner “tear drop” access. Recirculating HEPA filtration, including a pre-filter and HEPA filter that removes particles down to 0.3 µm with 99.997% efficiency, returning clean air back into the lab. Balanced airflow: Pre-set to a capture velocity of approximately 0.35 m/s, proven to offer both effective containment and stable weighing condition

Condition: used, This listing is for the Essen Bioscience Incucyte Zoom Analysis System The unit is in full working condition and is ready for immediate use Bsdpfsxhfgisx Ab Iswk The IncuCyte ZOOM Live‑Cell Analysis System is a pioneering live‑cell imaging and analysis platform developed by Essen BioScience (now part of Sartorius). It enables fully automated, time‑lapse imaging—and quantitative analysis—of live cells within their native incubator environment over extended periods Hardware configuration: The microscope gantry resides inside a tissue culture incubator. The external controller handles image acquisition, storage, and processing Imaging capabilities: Supports 4×, 10×, and 20× objectives (image resolutions: ~3.05 µm/pixel at 4×, 1.22 µm/pixel at 10×, and 0.61 µm/pixel at 20×). Fluorescence: green (ex: 440–480 nm, em: 504–544 nm) and red (ex: 565–605 nm, em: 625–705 nm) channels. Can house and image multiple T‑flasks or microtiter plates—up to six at a time—and process over 2,000 images per hour. Software & analysis: Batch processing of cell metrics: confluence, cell number, morphology, fluorescence, and more. Specialty modules like NeuroTrack support neurite/dendrite analysis. Works with hardware tools (e.g., WoundMaker) and specialized software like CellPlayer for migration and scratch-wound assay

Condition: used, This listing is for the Grant Bio PMS1000 Microplate Shaker The unit is in full working condition and is ready for immediate use Overview of the Grant bio PMS‑1000i Microplate Shaker Applications Ideal for mixing, incubation, and cultivation of biological or chemical samples in disciplines like microbiology, immunology, molecular biology, and biotechnology. Common uses include immunoassays, high-throughput screening, colorimetric testing, and binding assays involving magnetic beads. Improves reproducibility by ensuring proper resuspension of PCR products, aiding in consistent optical density readings and better plasmid DNA yields. Key Features Shaking mechanism: Driven by a brushless, direct-drive motor, providing smooth and reliable motion. Speed range: Adjustable from 150 rpm to 1200 rpm, suitable for both gentle mixing and vigorous agitation. Plate capacity: Supplied with a platform for 2 microplates (standard-depth 96-well or 384-well), with an optional accessory (MPP‑4) for supporting 4 plates. Bwedpfx Absxhfntj Isk Controls and display: Features a simple dial for speed adjustment, a 4-digit LED display indicating rpm and remaining time, plus a built-in electronic timer (1 min to 24 hours) with automatic shut-off. Secure plate fitting: Uses screw fittings to firmly hold plates in place, minimizing slippage during shaking. Technical Specifications Orbit diameter: 2 mm Dimensions: 90 mm (H) × 205 mm (D) × 220 mm (W) Operating temperature: 4 °C to 40 °C Power and consumption: External power supply (AC 120–230 V to DC 12 V), approximately 3.4 W (0.28 A)

Condition: used, This listing is for 1 of 2 Quattro Fluid SystemFlow 1000S These units is in full working condition and is ready for immediate use Overview & Application The Quattroflow 1000 S is a quaternary (four‑piston) diaphragm positive‑displacement pump—engineered for gentle, sterile handling of shear‑sensitive fluids such as proteins, vaccines, cell suspensions, and other biopharmaceutical or food-grade products. Its design features—like seal‑less operation, low shear, low pulsation, and dry‑run capability—make it ideal for critical applications including: Filtration systems: Tangential‑flow filtration (TFF), recirculation pumps, filter cartridges Chromatography: Gradient mixing and feed pumps Centrifuge feeding and homogenization Aseptic filling lines and other sensitive processing tasks Commonly processed media include albumin, IgG antibodies, enzymes, vaccines, cell and virus suspensions, dairy products, and cosmetic or polymeric solutions. Technical Specifications Here’s what’s known about its performance and build: Flow rate: Continuously variable between ~25 to 1000 L/h (at atmospheric pressure); around 750 L/h at 6 bar (depending on configuration) Max Pressure: Up to 6 bar, with high‑pressure variants available upon request Drive mechanism: Four‑piston diaphragm setup actuated by an eccentric shaft; standard variant uses a 5° eccentric shaft reaching up to 1,800 rpm Material & Construction: Pump head: Stainless steel grades 1.4435 or 1.4539, optional alternatives (like PEEK) available Membranes: Santoprene (diaphragm), EPDM (valve membranes) Priming and Pumping Features: Self‑priming, dry‑run capable Four directional porting—pump orientation flexible No shaft seals or wetted rotating parts, minimizing wear and product heating Internal volume (filling volume): Approx 35 mL; designed to minimize dead volume and aid product recovery Connections: Standard ¾″ TC (Tri‑Clamp) sanitary ferrule; other flange types available Dimensions & Weight: Pump: 523 × 155 × 212 mm, ~23 kg Control unit (frequency inverter): 350 × 155 × 212 mm, ~6 kg Electrical: 230 V AC (50 Hz) via a control box with 6.3 A fuse; motor IP54, control box IP53 Key Advantages Bedpfxsxhfp Rj Ab Iewk This model offers several standout benefits: Gentle, high‑integrity fluid handling—ideal for fragile biologics due to low shear and pulsation Contamination-free design—no mechanical seals, minimal abrasion Robust operation—powerful 370 W motor, simplified maintenance with fewer parts Aseptic and sterile process readiness—autoclavable, self‑draining, hygienic construction Installation adaptability—four flow directions, small footprint, flexible hookups

Condition: used, This listing is for the ATi Portsens111 Gas Leak Detector The unit is in full working condition and is ready for immediate use The ATI PortaSens III is a portable, handheld gas leak detector designed for locating and measuring gas leaks across a wide range of environments—from chemical plants to pharmaceutical labs, food processing facilities, and confined spaces Key Features & Capabilities Interchangeable Smart Sensors Attaches a variety of pre‑calibrated smart sensor modules, each combining sensor, amplifier, and memory into one. These allow detection of 30 to over 60 different gases, depending on configuration Swapping sensors takes under a minute and requires no user calibration Bwjdpfx Abexhfqbs Isk Built-in Sampling Pump & Flexible Wand Enables pinpoint detection of leak sources via one‑hand operation Color Touch-Screen Display Features a backlit, graphic or touch-enabled LCD for easy reading in all lighting conditions Data Logging & Connectivity Includes a 4 GB internal data-logger, capturing millions of data points. Log intervals are programmable from 1 to 60 minutes, with USB connectivity for data transfer Power Options Runs on either rechargeable NiMH “D” cell battery or traditional alkaline D-cell batteries Alarms & Alerts Offers both visual and audible alarms—including low flow and low battery warnings—plus multiple gas concentration thresholds Supported Gases The D16 PortaSens III can detect a broad spectrum of gases, including but not limited to: Toxic gases: Hydrogen sulfide (H₂S), hydrogen peroxide (H₂O₂), formaldehyde, chlorine, sulfur dioxide, ammonia, and others Common industrial gases: Oxygen (O₂), ozone (O₃), carbon monoxide, carbon dioxide Specialty/exotic gases: Arsine (AsH₃), diborane, ethylene oxide, phosphine, silane, bromine, iodine, and more

Condition: used, This listing is for the Isotech IPS 303DD Power Supply The unit is in full working condition and is ready for immediate use Description For sale is a used Isotech IPS 303DD DC Bench Power Supply, a reliable and accurate unit ideal for electronics testing, lab work, or educational environments. This model features precise voltage and current control, dual digital displays, and fine/coarse adjustment knobs for both voltage and current, offering versatility and ease of use in any bench setup. Key Features Output Voltage: 0 – 30 V DC Output Current: 0 – 3 A Dual LED Display: Simultaneous voltage and current readout Adjustable coarse and fine controls Constant Voltage (CV) / Constant Current (CC) operation Overload and short circuit protection 4mm safety binding posts for secure connections Internal fan cooling for thermal management Bjdsxhfqhepfx Ab Iewk Ideal For Electronics hobbyists and repair professionals Engineering and science students Workshops, makerspaces, and test labs