Used internal and face grinding machines for sale (55)

Condition: good (used), Year of construction: 1988, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm Csdpfjw Intasx Ab Tjrk --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm

Condition: used, Year of construction: 2003, internal diameter 99999 mm grinding depth 99999 mm swing diameter 99999 mm grinding diameter 99999 mm grinding length 200 mm centre height 175 mm CNC internal grinding machine B-axis 4 x 90° Q-axis for adjusting tapers Used with minor maintenance 2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm 1 external grinding motor spindle Fischer MFVS1407 7,000 rpm -Pneumatic power clamping device with 20mm stroke -Dressing device with 2 swivelling arms, hydraulically foldable back -Grinding detection ring sensor Dittel on the workpiece headstock Crjdpjuxft Sefx Ab Tok -Passive grinding detection with magnetic base -Paper belt filter 375 l

Condition: good (used), Made in Germany - min. bore: 6 mm - max. bore: 50 mm - max. grinding length: 80 mm - max. clamping diameter: 235 mm - distance spindle / table center: 145 mm - spindle speed: 640 und 1000 rpm - swivel angle from spindle to one side: 10° - max. table speed, hydraulic adjustable:: 12 m/min. - max. distance spindle / grinding device: 550 mm - power consumption: ca. 8 kW Crsdpfxoda A Eie Ab Tjk - weight: 2000 kg

Condition: ready for operation (used), Year of construction: 2002, cnc num machine rebuilt in 2002 front-end unit max. grinding diameter 200MM max. grinding stroke 200MM max passage diameter 500MM Cedjt E N Dmepfx Ab Tork weight 4500KGS

Condition: used, Year of construction: 1966, Voumard 3A 1966 YEAR Csdpfx Aot D Uxysb Tsrk

Condition: ready for operation (used), Year of construction: 2005, functionality: limited functionality, spindle speed (min.): 31,000 rpm, Equipment: rotational speed infinitely variable, We are offering for sale, due to a trade-in, a TOS BDU 250 A internal cylindrical grinding machine with the following specifications: Grinding diameter: 250 mm Maximum longitudinal table travel: 600 mm Maximum internal diameter: 250 mm Smallest diameter: 10 mm Workpiece spindle speed: 25; 45; 80; 140; 250; 450 rpm Internal grinding spindle mount: Currently Ø 100 mm Maximum diameter without chuck guard: 470 mm Adjustment of grinding headstock: 15° and 90°, mounted on an oscillating longitudinal table. Equipment: Crsdpfx Absw Rllxe Tok - Coolant tank - Hydraulic unit - Used internal grinding spindle - Machine lamp - Documentation and operating manual Machine information: Machine fault (transformer faulty, automatic operation possible only without dressing device).

Condition: used, Year of construction: 2007, turning diameter 1400 mm swing diameter 1600 mm turning height 500 mm Workpiece length - Bore grinding 300 mm Workpiece length - Turning 500 mm control Siemens Sinumerik 840 D work piece spindle speed range 0-400 U/min boring diameter 100 - 500 mm total power requirement ca. 185 kW weight of the machine ca. 35 t With grinding spindle Table strokes: - Z1/Z2 axis 1000 mm - X1/X2 axis approx. 1400 mm Table speed infinitely variable: - Z 0 to 30 m/min - X 0 to 60 m/min - Workpiece spindle flange diameter 520 mm - Infeed speed 0.01 - 15 mm/min Csdpfew Rf Slox Ab Tsrk Equipment/ Accessories - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - documentation

Condition: good (used), Year of construction: 1985, Grinding depth 300 mm Height of centers 300 mm Cross movement of the grinding wheel head 150 mm Min. grinding diameter 20 mm Max. grinding diameter 300 mm Spindle head (U axis) 300 mm Crjdowrzzmopfx Ab Tjk Workpiece spindle head (B-Axis) +/- 32° (-23°) +2° Max. table longitudinal movement 650 mm Machine weight approx. 7.5 t

Condition: excellent (used), Overbeck 250i Internal Grinder, S/N 26586 , New 1990. Heidenhain 2 Axes DRO, Coolant, hydraulic, Electrical cabinet. Credpfx Aow U Tvyob Tsk

Condition: used, Internal grinder VOUMARD 5S Crsdju Hac Dopfx Ab Tsk

Condition: used, voumard Crsdpjtzarnjfx Ab Tjk

Condition: refurbished (used), Year of construction: 1989, I am selling modernized machines for grinding inner rings for rolling bearings. The machines have an electro-frequency spindle paired with a frequency regulator and mechanical spindles driven by an electric motor. Attached is the original brochure from the WMW-BWF factory that produced these machines, where you can find all the technical characteristics and information about these machines. Crsdpfow Tigxsx Ab Tek For all further information and details, please contact us.

Condition: good (used), JUNG D22 / Internal Cylindrical Grinding Machine - Machine suitable for internal cylindrical grinding and face grinding - Smallest machinable bore: 14 mm - Largest machinable bore: 150 mm - Grinding length without face grinding attachment: 250 mm - Grinding length with face grinding attachment: [information not provided] - 6 workpiece spindle speeds: 46–270 rpm - Spindle head swivels left/right: 30 degrees - Distance from spindle axis to table center: 250 mm - Maximum distance between workpiece spindle and grinding support: 935 mm - Spindle head adjustable/skewed up to 30 degrees each - Worktable adjustable/skewed forward/backward up to 5 degrees each - Manual / automatic operation Cedpfx Abew Sv Dhj Tsrk - Taper grinding attachment - Steady rest - 3-jaw chuck - Spare grinding spindles Dimensions: LxWxH: 2.8 x 1.5 x 1.8 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: used, Year of construction: 1973, min./max. hole to grind 8 / 10 mm max. grinding depth by internal grinding 150 mm Credpfx Ajt Rlgujb Tjk swing dia. 450 mm workpiece spindle bore 35 mm max. swivability 30 ° min/max. table longitudinal travel 5 / 150 mm/min Internal Grinding Machine | D14 - 1973 The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: D-14 | D 14

Condition: good (used), Year of construction: 2011, CNC 235 BUDERUS HARD TURNING/GRINDING CENTER, 2011 Equipped with: Main Spindle 2-I.D. Grinding Spindles 8 Position Turret Siemens 840D Control Hydraulic Chucking Rotary Dresser Chip Conveyor Gantry Loader Marposs E9066M Hydraulic System Chip Bucket Cedpfx Absrtryys Tjrk Fire Suspension Sysem Chiller Specifications: Number of Main Spindles: 1 Maximum Work Part Diameter: 200 mm Maximum Part Length: 150 mm Maximum Number Machining Station: 4 Rapid Feed/Speed X/Z: 90/30 m/min

Condition: used, TECHNICAL DETAILS - Grinding diameter : 3 / 80 [mm] - Grinding depth : 80 [mm] - Max. part length : 250 [mm] - Max. part diameter : 240 [mm] - Centers height : 130 [mm] - Part-holder headstock swiveling : -5 / +60 [°] - Bar clearance : 25 [mm] - Metric shaft nose internal taper : 40 - Part-holder spindle speed with continuous adjustment : 350 / 1.200 [Rpm] - Strokes X/Z : 50 / 300 [mm] - Installed power : 17 [kW] - Dimensions (LxDxH) : 200 x 180 x 160 [cm] - Machine weight : 2.200 [kg] EQUIPMENT - Automatic downfeed - 1 VOUMARD M45DR internal spindle : 45.000 [Rpm] Credpfxsuhbmke Ab Tek - Automatic parts loader - Hydraulic wheel dresser - 3 jaws chuck - Coolant tank * with coolant through part center

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, 1 internal and surface grinding machine Credew Dtfbjpfx Ab Tok Manufacturer: WEMA Glauchau Model: SI 6/2 ALS PC x 710 Year of manufacture: 1985 Grinding depth: 710 mm Table travel: 1120 mm Grinding diameter: 40–400 mm Weight: 9.1 t

Condition: used, Year of construction: 1983, Technical details: internal diameter: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,8 x 2,5 m max. workpiece weight: 15 kg Crjdpfx Aber R Elho Tek clamping dia. max.: 140 mm clamping length: 250 mm max. bore diameter to be ground: 0,8-90 mm min./max. hole to grind: 160 mm centre height: 90 mm workpiece spindle stepless: 112-1000 U/min

Condition: good (used), High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: internal grinding spindle -Drive motor: BBC 1.5 kW / 2870 rpm -Spindle speed: approx. 9800 rpm -Shaft axis: adjustable max. height 460 mm Cedoizk Rzopfx Ab Tsrk -Recording/Dimensions: see photos -Total dimensions: 730/400/H535 mm -Weight: 105 kg

Condition: used, TECHNICAL DETAILS - max. grinding length: 500 [mm] Crsdpfou Hac Rex Ab Tek - max. grinding diameter: 3000 [mm] EQUIPMENT - 1 grinding spindle 12000 [t/mm] - retractable wheel dressing device - coolant tank with pump and paper filtration

Condition: used, Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinding machine, center grinding machine Crsdjfig Sujpfx Ab Tok -Precision universal cylindrical grinding machine -Max. Shaft diameter: 203 mm -Max. Grinding length: 490 mm -Collet: Ø 32 x 87 mm -Grinding wheels diameter: 160 mm -Dimensions: 1660/1500/H1500 mm -Weight: 1802 kg

Condition: used, TECHNICAL DETAILS - Grinding length : 120 [mm] - Center height : 102 [mm] - Strokes (X/Z) : 450 x 200 [mm] - Max speeds (X/Z) : 12 [m/min] SPINDLE SUPPORT - Spindle number : 2 WORKPIECE HEADSTOCK - Max. workhead speeds : 1500 [rpm] - Spindle clearance : 28.6 [mm] - Power : 1.4 [kW] - Mounting tape r: A2.4/CM5 - Torque : 150 [Nm] - Manual B axis angle : +/- 2 [°] - C axis : 0.0001 [°] POWER SUPPLY - Installed power: 34 [kVA] DIMENSIONS - Floor dimensions : 3600 x 2800 [mm] - Machine weight : 2600 [kg] MACHINE HOURS Crodpfx Absuhbmqo Tjk - Number of hours under power : 26781 [h] EQUIPMENT - Fanuc Oi-TD control - Spindle centre coolant - Cooling unit for spindle cooling - Loading robot - 2 spindles available : 59.600 - 41.600 [rpm] - Dressing turbine

Condition: used, Grindstone, grinding pencil -for internal grinding machine -1 collet holder Codpfx Asb A Inqsb Tsrk -Taper cone: Ø 53 mm -Mounted points: different diameters -Outer diameter: 1-40 mm -Sale: only complete -Weight: 6 kg

Condition: used, High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: for lathe -Electrically operated -Max. Speed: 6900 rpm -Admission: M42 x 1.5 mm -Dimensions: 600/390/H355 mm -Weight: 64 kg Crodpfjc N N H Dsx Ab Tjk

Condition: used, Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinder, center grinder -Image below: MK5 Crodpfx Aod Atx Dob Tek -grinding wheel mount: -Motor data: 0.3 kW 1380 rpm -Dimensions: 370/180/H480 mm -Weight: 36 kg