Kent KGS 615 WMA1

Kent KGS 615 WMA1

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Gsdpeuyk N Ijfx Ankjit

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Gijdpfxsrqwbij Ankst Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories - Counter supports for cutting shaft - Cutting shaft ø32 mm

Condition: used, Thread rolling machine ORT RP30U 2-roll 30 ton swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Giedpfxot H Ty Uo Anket Power (Ton): 30 Number of rollers: 2

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details shown on picture. Gijdpferpn Dvsx Ankst

Condition: new, Year of construction: 2026, 0554 mm 370 mm Gsdpfxowyd Tne Anksit 2000 mm 280 mm 104 mm 11 kW

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, empty load weight: 2,450 kg, Charmilles Robofil 240 Year of manufacture 2001 Travel distances (X / Y / Z): 350 x 220 x 220 mm Travel distances (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Giodpjwqdrrefx Anket Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed of 300 mm²/min Best surface: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete system: 2020 x 2050 x 2000 mm Total weight of the system: 2450 kg The machine is cleaned, overhauled, and tested by us before delivery. We are happy to offer you the commissioning of the machine.

Condition: excellent (used), Grinding length without magnetic table: 1500 mm Maximum grinding width: 750 mm X-axis longitudinal travel: 1520 mm Y-axis transverse travel: 650 mm Z-axis vertical travel: 690 mm Grinding wheel diameter: 406 x 100 mm Spindle speed: 1400 rpm Weight: 8600 mm Accessories: Braillon magnetic table 1000 x 500 mm Giodpfxswlh Ads Ankst Elcon 3 electronic control

Condition: good (used), Year of construction: 2013, grinding diameter 140-355 mm grinding length 3000 mm centre height 260 mm weight of the machine ca. 8,3 t dimensions of the machine ca. 8500 x 3500 mm SA 6Ux3000 external cylindrical grinding machine Godpfx Ajynmpyjnkeit Year of manufacture: 1981 Retrofit: 1 x 2013 SERWEMA Maximum grinding diameter with tailstock: 140 mm Maximum grinding diameter without tailstock: 355 mm Maximum grinding length: 3,000 mm Center height 260 mm Workpiece weight max. 500 kg Machine footprint 8500 x 3500 mm Machine weight 8500 kg

Condition: ready for operation (used), Year of construction: 1985, A thread and worm grinding machine Reishauer AG is available. Grinding length: 450mm, clamping length: 700mm, max. grinding diameter: 200mm, max. pitch: 80mm, max. workpiece weight: 100g, max. lead angle: +/-25°, grinding wheel diameter: 275mm/350mm, speed: 1850rpm. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1600mm, weight: approx. 3400kg. Including oil centrifuge, hood, oil mist extraction and various accessories. The splash curtain is slightly hardened. Documentation available. An on site inspection is possible. Gedpfx Aex Dm Dnsnksit

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Perfekt 6, year of manufacture 2002, grinding area 600 x 400 mm, grinding wheel 300 x 50 mm, 4 kW spindle power, automatic grinding cycle, roughing, finishing, spark-out, lifting, dresser mounted on spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry of a new machine. The grinding spindle has new bearings. Accessories: electro-permanent magnetic clamping plate 600 x 400 mm, water tank with paper filter unit. All functions have been tested and the machine can be demonstrated under power at our facility. We are also happy to handle on-site installation and training, as well as future servicing. Financing/leasing is available; we will be pleased to provide an offer! Gisdpfxsxdalfs Ankst