Used Plunge Pool for sale (227)

Condition: good (used), Knife grinding machine, surface grinding machine Fsdpfx As Af Np Aoh Eegi Göckel 5000 mm

Condition: used, Year of construction: 2016, operating hours: 17,381 h, functionality: fully functional, machine/vehicle number: 500015294, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, total width: 9,152 mm, total height: 7,749 mm, total length: 38,975 mm, type of input current: three-phase, input voltage: 400 V, input current: 213 A, overall weight: 30,000 kg, pressure: 300 bar, transport height: 2,800 mm, pressure (max.): 330 bar, opening width: 970 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, control cabinet length: 3,000 mm, oil tank capacity: 2,000 l, empty load weight: 25,000 kg, operating pressure: 300 bar, transport width: 2,500 mm, transport length: 12,000 mm, input frequency: 50 Hz, Equipment: documentation/manual, We are offering for sale a HSM VK 8818 R FU channel baling press (compact in-line version) with Stadler brand conveyor in very good condition. The machine has been maintained and serviced by manufacturer HSM throughout the past 10 years. The price covers the complete equipment, exactly as shown in the pictures. Terms for sale: - The sale includes the complete equipment - Baling press, conveyor system, maintenance platform, wire stations, safety modules, documents, drawings, manuals - The buyer is responsible for dismantling and loading and transportation of the machine. If needed we can arrange dismantling and transport by 3rd party based on mutual agreement. - Complete service history and service reports are available for request Fjdpfx Ahe Agbq So Esgi For further information or to arrange an on site visit please contact us.

Condition: good (used), Year of construction: 2012, (Please provide us with your offer price.) Sales only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== Two machines of the same type are being sold. Year of manufacture: 2012 and 2015. Fjdpfx Ajy Ty Hdoh Esgi Technical data can be found in the attached handout. Any warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: used, Year of construction: 2009, operating hours: 7,860 h, functionality: fully functional, total length: 2,160 mm, total width: 1,110 mm, total height: 1,600 mm, overall weight: 2,600 kg, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, We offer this used Officine Monzesi Monza 410, manufactured in 2009. MONZESI Monza 410 CNC 1 centerless grinder High-precision machine in excellent working condition, available for inspection under power. Ideal for high-volume precision grinding (automotive, medical, aerospace, or micro-technical components). The original configuration of this machine made it possible to perform micrometer-precision machining of highly sensitive parts (sapphire disks). 🛠️ Key Technical Specifications • Workpiece capacity (external diameter): From 3 to 100 mm. • Maximum plunging/traverse length: 200 mm • Grinding wheel: Max. external Ø 406 mm | Max. standard width 200 mm | Motor power 15 kW (1560 rpm). • Drive wheel: Max. external Ø 254 mm | Max. standard width 200 mm | Brushless servomotor 3.9 kW, variable speed (5 to 285 rpm). • X-axis (Slide Feed): Satellite roller screw (Ø 32 mm, pitch 5 mm) driven by a 6 Nm digital servomotor with a direct optical scale for absolute micrometer precision (programmable minimum increment of 0.0005 mm). 💻 Numerical Control & Automation • CNC: FANUC Power Mate iD digital with Fanuc motors and actuators. • Operator interface: Color touchscreen with graphical pages designed for quick and easy operation. • Electronic precision: Programmable minimum increment of 0.0001 mm. • CNC advantages: Absolute encoders (pulse coders) eliminating the need for referencing at start-up, statistical management of the X-axis with programmable automatic compensation for grinding wheel wear. 📦 Included Accessories and Peripherals The machine is sold with its original equipment and essential workshop accessories: • Oil mist extraction: AR FILTRAZIONI model ARNO 1 VF system (max. flow rate 1500 m³/h) for pollution control in the work area. • Mechanical equipment: Blade holder for in-line operation, grinding wheel holder (Ø 203 mm), drive wheel holder, and static balancing devices and pivots for the grinding wheels. • Safety & Ergonomics: Full sliding protective enclosure compliant with CE standards, secured by automatic locking during wheel rotation, and equipped with internal lighting. • Complete original documentation: Installation, operation, and maintenance manuals, parts catalog, and complete electrical/hydraulic/pneumatic diagrams. (Note: Machine sold without its original fabric filter unit). 📝 Sales Terms & Logistics • Year of manufacture: 2008. • Condition: Very good condition, regular geometric cycles. • Inspection: Machine available for inspection in working condition and under power for testing. • Removal: Lifting, handling, loading onto a truck, and transportation are the sole responsibility of the buyer. (Provide lifting equipment suitable for the weight of the machine base: 2,600 kg excluding the electrical cabinet). • Price: CHF 30,000 (excluding VAT). Manufacturer: Officine Monzesi Model: Monza 410 Fodpsz Ernlofx Ah Eegi Year of manufacture: 2009 Condition: Used Category ID: 26 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2006, operating hours: 21,565 h, functionality: fully functional, machine/vehicle number: 107.37.00.165, total height: 2,700 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 7,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10,697 h, spindle motor power: 10 W, number of spindles: 1, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Offered here is a CNC vertical 5-axis machining center from the manufacturer Mikron, featuring a workpiece pallet pool with 7 pallets. The machine is in very good condition and can be inspected and tested at any time. Manufacturer: Mikron GF Type: UCP 600 Vario Year of construction: 2006 Control system: Heidenhain iTNC 530 Technical data: Travel ranges X-Y-Z: 600x450x450 mm Max. rapid traverse: 22 m/min Max. feed force X and Y axis: 5 kN Max. feed force Z axis: 7 kN Rotary table C-axis: 360° Swivel range A-axis: -115° to +30° Table surface: 450x450 mm Max. table load: 200 kg Magazine positions: 30, fixed coded positions Tool holder: ISO-B40 Max. tool length: 250 mm without taper Max. tool weight: 6 kg Tool diameter: 90 mm fully loaded / 130 mm partially loaded Fgodpfxo Aivkas Ah Eoi Spindle speed: 12,000 rpm Power: 15 kW at 44% duty cycle, 10 kW at 100% duty cycle Machine dimensions: 3300x2400x2700 mm (excluding pallet pool) Weight: 7,700 kg Included in the scope of supply: 1x KSS system 1x Chip conveyor with coolant tank 1x Spindle oil cooler 1x Pallet pool with 7 work pallets 1x Renishaw measuring probe OMP60

Year of construction: 2019, condition: as good as new (ex-display), Used Machine Fedezrpxwopfx Ah Eogi Year of Manufacture: 2019 Condition: Display model, like new Features and Technical Specifications: - Battery voltage: 18 V - Saw blade diameter: 160 mm - Bore: 20 mm - Cutting depth: up to 57 mm at 90° up to 40.5 mm at 45° - Tilt range: -1° to 48° - No-load speed: 4,850 rpm - Dust extraction port - Weight: approx. 4.5 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale is our FORMAT4 tempora F400 45.03 L edge banding machine from Felder, used in our furniture workshop. The machine was purchased in 2019. The equipment includes joint milling, trimming, flush trimming and radius milling, corner processing, as well as radius and surface scraping blades and polishing units. PERFORMANCE DATA According to the total counter of the machine control system, as of October 30, 2026: • Piece counter: 24,696 • Total edge length processed: 22,186.4 m • Operating time of chain conveyor: 415 hours 58 minutes • Operating time of main switch: 4,996 hours 3 minutes The counter readings are documented in the attached display photo. The operating time of the main switch is shown separately from the actual operating time of the chain conveyor. EQUIPMENT • m-motion control system with a 10-inch smartouch touchscreen • Jointing unit with plunge-controlled diamond cutters • Teflon-coated gluing unit for 1.5 kg of EVA granules with synchronized gluing roller • Pneumatically controlled pressure unit • Guillotine shear for roll edge material from 0.4 to 3 mm • Miter saw unit with 0°/10° cutting selection • Upper and lower flush trimming and radius milling units with manual adjustment • Corner processing unit for post-forming and softforming profiles • Radius scraping blades, top and bottom • Surface scraping blades, top and bottom • Polishing units, top and bottom • Release agent spray device • Extendable workpiece support • Edge magazine with rotary table, diameter 740 mm TECHNICAL DATA • Workpiece height: 8–45 mm • Roll edge thickness: 0.4–3 mm • Feed rate: 9 m/min • Minimum workpiece length: 140 mm • During corner processing: workpiece height 10–45 mm and minimum workpiece length 270 mm • Jointing depth, manually adjustable: 0–2 mm • Electrical connection: 400 V / 50 Hz Fjdpfx As Ahmv Aoh Ejgi INSPECTION AND PICKUP Location: Neuwied. Inspection by appointment only. Pickup only. Transportation and loading must be arranged in advance.

Condition: like new (used), Year of construction: 2022, operating hours: 40 h, functionality: fully functional, total height: 2,200 mm, total width: 1,600 mm, total length: 3,700 mm, type of input current: three-phase, overall weight: 12,000 kg, input voltage: 480 V, input frequency: 60 Hz, grinding spindle motor power: 22,000 W, space requirement height: 2,200 mm, spindle speed (max.): 2,406 rpm, Very Low Hours, Hardly Ever Used- Specifications: Workpiece diameter: max. 100 mm (3.94") Fjdpj Agptyefx Ah Eegi Workpiece diameter: min. 2 mm (.08") Workpiece length with plunge grinding: max. 195 mm (7.68") Grinding wheel diameter: max. 500 mm (19.69") Grinding wheel diameter: min. 380 mm (14.96") Maximum wear of the grinding wheel - Straight plunge cut: 60 mm in radius (2.36") - Inclined plunge cut: 25 mm in radius (0.98") Width: max. 200 mm (7.87") Bore: 305 mm (12") Circumferential speed of the Grinding wheel standard: max. 63 m/s Regulating wheel diameter: max. 300 mm (11.81") Width: max. 200 mm (7.87") Bore: 203 mm (7.99")Grinding wheel drive power standard: 22 kW Unit: Metric - Provision of the grinding wheel and regulating wheel unit: X1/X2 axis - Infeed axis of the grinding wheel dressing tool: Z1 axis - Longitudinal feed of the regulating wheel dresser: W2 axis - Speed control of the grinding wheels: SP1 spindle - Speed control of the regulating wheel: SP2 spindle 3 operating modes: - Set-up - Grinding in single operating mode (only with plunge grinding) - Automatic grinding - cycle operating mode Noise emission at the machine: Automatic loading - Basic machine: approx. 12,000 kg (approx. 26,455 lbs.) - Dimensions of the basic machine (without control cabinet) Length: 3,700 mm (146") Width: 1,600 mm (63") Height: 2,200 mm (87") Equipped with: Grinding Wheel Balancing System, Regulating Spindle Swivelling, Height Adjustment of Work Rest Holder-NC axes, Auxiliary for Grinding Wheel Exchange, Second Operating Panel, Loading Unit, Loading System for Manual Loading, Unloading System with Integrated Measuring Unit, Workpiece Dependent Accessories, Compact Filter Unit

Condition: used, Year of construction: 1979, functionality: fully functional, Grinding wheel diameter: 600 mm Center width: 300 mm Center height: 180 mm Headstock Fedpervybtsfx Ah Ejgi Counter holder with pressure cylinder

Condition: new, Year of construction: 2026, Martin Swivel Spindle Milling Machine T 27 Flex - swivelable on both sides - Flexibility for today and tomorrow. Setting up a swivel milling machine is usually a major challenge. Not with the T27 Flex, which features a modern touchscreen control: thanks to the integrated tool offset function, you can set up even complex milling patterns with a swiveled spindle in no time. This is the only way to efficiently utilize the large swivel range of 2 x 46° – and you can fully follow your preferences. Furthermore, the machine can be very precisely adapted to the individual requirements in the workshop. Fgsde Ai Hwqspfx Ah Eji Equipment: T 27 Flex T 2712-a Electric adjustment of the milling fence T 2711-a Digital display of the feed jaw position in the control panel T 2731-a Table extension on both sides + extendable workpiece support T 2735-REa Fence for plunge milling T 2740-a Centrex guard T 2742-a Integral fence T 2743-a Milling jaw clamping system Auto Lock T 2745-a Swivel pre-installation T 2790-La Console for feed stand mounting on the left The photo shows only an example machine / feed and support are not included. What is included is stated in the text. Location: in warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1994, spindle diameter: 50 mm, spindle speed (min.): 6,000 rpm, We offer a used WEINIG Univar 10/2 profiling and rabbeting machine, primarily designed for rabbeting windows, doors, and similar profiles. The machine is equipped with two hydraulically controlled, right-hand precision spindles that can be raised and lowered, allowing for the clamping of three sets of tools on top of each other. The lifting mechanism uses a U-shaped motion, enabling the machining of short workpieces. The individual tool positions can be finely adjusted in the radial direction. To ensure high-quality machining without material tear-out, the first spindle allows the selection of either a left-hand or right-hand rotation direction. It is equipped with a mechanical brake for changing the direction of rotation. During the machining of the last 100 mm of each frame end, the spindle plunges into the wood with the corresponding matching tool, thereby reducing material tear-out in the corners of the frame. The construction also includes an additional support rail for large-format frames. Technical equipment and functions: * 2 hydraulically controlled, right-hand precision spindles that can be raised and lowered * Ability to clamp 3 sets of tools on top of each other * U-shaped lifting mechanism for machining short workpieces * Fine radial adjustment of individual tool positions * Central lubrication of spindle units * Selection of left-hand and right-hand rotation for the first spindle * Mechanical brake for changing the direction of rotation Fedpfxo Aguv Es Ah Eegi * Additional support rail for large-format frames * Continuous, chainless feed using rubber-coated rollers with a very short pitch * Height adjustment of the feed beam using a ratchet * Program control with a selector switch for a single program * Automatic change of stroke for two workpieces in the tenon-rabbet section * Ability to program up to 4 workpieces, or 4 sides, for longitudinal profiling and rabbeting The machine does not include machining tools.

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, This 3-axis HAAS VF-2SSYT with Pallet Pool 3+1 was manufactured in 2022. It features a 30 hp, 22.4 kW in-line spindle, capable of 12,000 rpm, and a 50+1 tool changer. It includes a 15" screen and a 3+1 pallet pool with 900x450 mm pallets. If you are looking to get high-quality milling capabilities, consider the HAAS VF-2SSYT machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Tool changer: 50+1 tool changer Fsdpsx Hbluefx Ah Esgi • Extra coolant: 360 liters • Pallet pool: 3+1 pallet pool with 900x450 pallets • 21 bar trough spindle • 15" screen Extra Information Machine still under power

Year of construction: 2016, condition: used, A CNC external cylindrical grinding machine, manufactured in 1998 and modernized by GSN Schleiftechnik in 2016, is offered. Grinding length max.: 2000mm. Grinding diameter: 700mm. Distance between centers: 2000mm. Center height: 500mm. Plunge grinding length max.: 125mm. Grinding spindle drive power: 22kW. Control: Siemens SINUMERIK with SIMATIC HMI touch panel and SINUMERIK HT 2 handheld terminal. Equipped with a special clamping fixture for grinding nickel sheets, coolant supply, hydraulic power units and control cabinet cooling. Inspection possible by prior arrangement. Fgjdpfxo Ah Tybo Ah Eoi

Condition: good (used), Year of construction: 2017, machine/vehicle number: HD 11610556, pressure: 350 bar, overall weight: 850 kg, power: 30 kW (40.79 HP), Equipment: type plate available, Used high-pressure plunger pump with integrated gearbox and special crosshead seal. Designed for low-viscosity media. Main areas of application in industry and services: - Sewer cleaning - Descaling - Industrial high-pressure cleaning - Special applications Technical specifications: Type: KD716-GK Year of construction: 2017 30kW Pressure: 350 bar 1500 1/min 47 l/min With Elektra electric motor 14BG 220-4AA60-Z 225S 400 / 690V 68 / 39.5A 50Hz 37kW 1475 1/min Condition: used (see pictures and type plates) Scope of delivery: 1 PUmpe Fgjdpstuqlxofx Ah Eei

Condition: used, Motan DH-1 N-A/B – Portable Continuous Flow Water Heater You are purchasing a fully functional continuous flow water heater from Motan. This unit comes from Bundeswehr (German Armed Forces) stocks and is in very good condition. Versatile for various applications, e.g., as a pool heater. It’s the perfect solution for quickly heating swimming pools. A 100 m³ swimming pool can be heated to 30°C in just 3 hours. You won't find a faster way to heat the water. Perfect for use anywhere where there is no electricity available. Camping sites, weekend houses, construction sites, and camping. Its effective output is continuously adjustable from 40.5 kW to 128 kW. Despite its high output, the unit is still portable, weighing only 130 kg. Since the water temperature can be set freely within the range of 30°C to 90°C, the unit can be used in many ways, e.g., as a hot water generator for camping shower facilities, for hot water production. Also perfect for Koi ponds. Technical data: Output: 35,000 kcal/h to 110,000 kcal/h, continuously adjustable (40.5 kW to 128 kW) Maximum water flow rate: approx. 3600 l/h Water at maximum heating output. With maximum water flow, the temperature increase is approximately 30°C, i.e., with a water inlet temperature of 10°C and a 30°C increase. Increase = 40°C final temperature Drive: Two-stroke engine, Fichtel & Sachs, Stamo 75, displacement: 75 cc Output: 2.5 HP at 4500 rpm Consumption: approx. 1.8 l/h, mixture 1:25 (for the engine!) For the burner, depending on the water flow, max.: 24 l/h gasoline at a maximum flow of 3600 l/h Tank capacity: 5 liters Dimensions: Width: 500 mm, Length: 1040 mm, Height: 850 mm Weight: approx. 130 kg Manufacturer's price: €8,000 You can find more new and used items in our shop! International shipping costs available upon request! Fgjdpfoulgh Nsx Ah Eoi

Year of construction: 2005, condition: used, Technical details: workpiece length: - mm workpiece height max.: - mm workpiece width - max.: - mm basket dimensions: 840 x 540 mm heating capacity: 650 W filling amount: 80 -120 l frequency range: 50 Hz connection voltage: 230 V temperature range: 15 -48 °C power consumption: 700 W lifting capacity in kg: 250 kg weight of the machine ca.: 60 Kg dimensions L x W x H: 1,1 x 0,97 x 6,9 m Bio-Circle Maxi Cleaning System – a high-quality industrial parts washer for efficient and environmentally friendly cleaning of components. Biological cleaning system – without aggressive chemicals Continuous operation possible (self-cleaning fluid) Integrated heating for optimal cleaning performance Cleaning directly via brush with fluid supply Ideal for workshops, industry, mechanical engineering & automotive * Fgsdpfxjyzhnls Ah Eoi

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, workpiece weight (max.): 1,000 kg, grinding height: 430 mm, grinding wheel diameter: 405 mm, table load: 1,000 kg, grinding wheel width: 50 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 500 rpm, grinding spindle motor power: 7,500 W, warranty duration: 12 months, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, First commissioning: 2024 Operating hours "grinding wheel in use": approx. 100 hours The machine will be completely inspected by the manufacturer OKAMOTO and delivered with an acceptance protocol for the geometry. Manufacturer's warranty: 12 months for delivery within the European Union and commissioning by T-Rade Service GmbH (commissioning optional in Germany: EUR 7,900, EU EUR 9,800) Design: Column feed Control: Fanuc Screen: Touchscreen Workshop programming: for flat, groove, and step grinding (optional) Conventional operation of the machine possible (manual operation) Automatic multiple plunge cuts Teach-in functions: vertical, dressing, and reversing points Folding dresser with 3 diamonds next to the magnetic clamping plate Automatic compensation of dressing amount Longitudinal guides: double prism, hand-scraped with thermally symmetrical behavior, PTFE coated Maximum table load: 1,000 kg Hydraulic table drive X-axis Electric servo table drive Z-axis Electric servo grinding spindle drive Y-axis Travel in longitudinal direction: 950 mm Travel in transverse direction: 440 mm Travel table-new wheel (Ø 355 mm): 522 mm Grinding wheel standard: Ø355x38 mm Grinding wheel Ø max.: 405 mm Grinding wheel width max.: 50 mm Grinding wheel bore: Ø 127 mm Grinding spindle drive power: 7.5 kW Grinding spindle speed, infinitely variable: 500-2500 rpm Leveling screws and support plates Operating/programming/maintenance manual, operating tool LED lamp Machine paint: Dark gray/silver structure Machine dimensions approx. L x W x H: 3,560 x 2,900 x 2,210 mm Weight approx.: 4,950 kg Connection value: 15 kVA Accessories: Folding dresser with automatic compensation Coolant flushing gun Flanges 1 piece Grinding wheels 1 piece Commissioning and training by OKAMOTO is mandatory for the warranty. Optionally available: Electro-permanent magnet, transverse pole: 800x400 mm, p=13 mm, extra charge EUR 9,000.00 Band filter tank: 180 liters, extra charge: EUR 9,000.00 All information is non-binding, subject to prior sale. The machines remain our property until full payment. Our general terms and conditions apply. Delivery: ex works Delivery date: upon agreement (approx. 8 weeks) Fgedpfjz Hc Sdsx Ah Esi Prices: plus VAT Payment terms: strictly net, 10% with order, 90% before shipment The price for the machine as stated is valid only in Germany. Other EU countries at an extra charge upon request. No export of the machine.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Matsuura G-tech (Fanuc), controller model: 16i, workpiece height (max.): 750 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 400 kg, total height: 2,635 mm, total length: 5,870 mm, total width: 3,440 mm, table width: 500 mm, table length: 500 mm, table load: 400 kg, overall weight: 13,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained Matsuura H-Plus 405 with pallet pool. This is a highly compact machine with extensive machining capabilities and 240 tool positions in the magazine. The machine was manufactured in 2004 and is equipped with the Matsuura G-Tech 16i (Fanuc 16i) control system. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 6 Table load capacity: 400 kg X-axis travel: 600 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table indexing: 0.001° Fgodsz Rmk Tjpfx Ah Eji Spindle mount: Mas BT40 Big Plus Spindle speed: 50 – 15,0001 rpm Spindle motor: 22/18.5 kW Magazine capacity: 240 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, power: 4.4 kW (5.98 HP), cutting height (max.): 2,200 mm, cutting width (max.): 4,300 mm, saw blade diameter: 3,030 mm, total length: 5,400 mm, total width: 1,600 mm, total height: 2,770 mm, overall weight: 800 kg, Equipment: CE marking, scorer, Technical specifications: Manufacturer: Striebig Model: Standard TRK3 5220A Year: 8/95 Feed: manual Construction: automatically retracting wooden slat frame Saw carriage locking: manual Saw unit plunge: manual Motor power: 5.5 kW Cutting area: 4300 × 2200 × 80 mm Speed: 4750 rpm Saw blade diameter: 303 mm Required space: L × H × W 5400 × 3000 × 1400 mm Mounting: free-standing Location: warehouse Fedpfx Asy Sgz Esh Esgi Delivery and installation possible by arrangement Price: €11,888 gross, VAT can be stated separately.

Condition: used, High-pressure pump unit Type: 1502 35 High-pressure plunger pump of the 2 series Max. pressure: 228 bar Fgodpsyt Nv Tsfx Ah Esi Flow rate: 130 l/min Driven by ABB 55 kW electric motor

Condition: used, Year of construction: 1982, center height: 125 mm, grinding length: 650 mm, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Grinding diameter: 250 mm Grinding length: 650 mm Center height: 125 mm Distance between centers: 650 mm Grinding length in plunge grinding: 80 (100) mm Grinding depth in internal grinding: max. approx. 170 mm Grindable bore: max. 90 mm Workpiece weight: max. 80 kg Distance between workpiece spindle and tailstock center: 960 mm Spindles Internal grinding spindle speed: 9,500–50,000 rpm Grinding wheel diameter: max. 400 mm Spindle bore: 30 mm Workpiece tailstock can be swivelled: 90° Feed and table movement Workpiece table speed: 50–10,000 mm/min Feed rate: 240 mm/min Cooling Coolant consumption: 36 l/min Drive and power Spindle motor drive power: 6.25 kW Connected power: approx. 10 kW Total power consumption: 8.5 kW Machine data Machine weight: approx. 3.4 t Space required: approx. 3.9 × 2.5 × 1.85 m Control and drive Control: Studer Drive: electric / hydraulic Speed control: stepless EQUIPMENT Fedpfx Aj Aa Ai Aoh Eogi Tailstock with fine adjustment and hydraulic retraction Workpiece tailstock with increased accuracy Table air lift Hydraulically foldable dressing device Radius dressing device Hydro-cyclone filter Automatic grinding wheel balancing device Automatic dressing cycle with speed compensation Internal grinding device

Condition: excellent (used), Year of construction: 1998, STRIEBIG panel saw, vertical, model II TRK 5220A, with Nestro NE 160 dust extraction unit. Used, in working condition, and in good condition. Panel saw: Year of manufacture: 01/1998 Type: Standard II TRK 5220A Saw carriage locking: manual Fsdpfszvqryox Ah Ejgi Plunge cutting: manual Swivel adjustment 0 to 90°: manual Motor power: 4.4 kW Speed: 4750 rpm Saw blade diameter: 300 mm Panel saw dimensions: Length: 5030 mm Height: 2500 mm Depth: 430 mm The panel saw and the dust extraction unit must be disassembled by the buyer. Dust extraction unit Nestro NE 160 Three-phase power, 2.2 kW Filter area: 11.5 m² Collection tank volume: 185 liters Extraction nozzle diameter: 160 mm Nominal volumetric flow rate: 1780 m³/h Dimensions approx. 130 x 85 x 193 cm Price: €12,000 net Delivery and installation possible.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 1404, total width: 1,690 mm, total length: 3,410 mm, total height: 1,915 mm, overall weight: 3,000 kg, TECHNICAL DATA Capacity - Height of centres: 125/175mm - Distance between centers: 400mm; 700mm; 1025mm - Max.travel of longitudinal slide: 400mm; 700mm; 1025mm Table - Table speed steplessly adjustable: 0.5 - 5.5 m/min. - Reversal dwell of table: 0-6 sec. - Minimum automatic stroke approx.: 1.5mm - Maximum swivel of table: 400 deg.- 12 ; 700 deg. -10; 1025 deg.- 8 - Travel per revolution of handwheel: 25mm Workhead - Swivel towards grinding wheel: 90 deg. Fgedpeupiycofx Ah Eoi - Spindle speed, steplessly variable: 30 - 675 RPM - Spindle nose taper: Morse 5 - Collet shank diameter: 25mm - Diameter of 3-jaw chuck: 160mm Wheelhead - Grinding wheel L.H. or R.H.: - Diameter (special exec. 6.25kW/8.4 HP): 400 (450) mm - Maximum width: 50 (80) mm - Bore: 127 (203) mm - Spindle speeds (3-step Vee-belt pulley) - Grinding wheel dia 400: 1500/1625/1800/2000/2200/2400 RPM - Grinding wheel dia 450 (8.4HP): 1340/1500/1625/1800/2000/2200 RPM - Grinding wheel motor approx.: 3kW - Grinding wheel motor, special for 450 dia wheel approx.: 6.25kW - Rapid travel of wheelhead: - Hydr.approach and retraction: 40 mm - Additional adjustment with hand leveler: 210 mm - Swivel of the whole cross slide L.H. and R.H.: 45 deg. - Interminent feed, steplessly adjustable (on dia) at left or right hand table reversal, or both: 0.001 - 0.05 mm/sec. - Plunge feed, steplessly adjustable (on dia): 0.0002 - 0.1 mm/sec. - Maximum depth of plunge on dia: 1.7 mm Motor rating - Wheel spindle, standard: 3 kW - Wheel spindle special rating: 6.25 kW - Workhead: 0.55 kW - Hydraulics: 0.55 kW - Coolant pump, standard: 0.17 kW - Coolant pump, inteclon: 1.1 kW Workpiece weight - Maximum between centers: 80 kg Extras: grinding wheels, coilets, other additional equipment, user manuals

Condition: used, Year of construction: 2011, input voltage: 400 V, pressure: 7 bar, total width: 4,600 mm, total length: 6,700 mm, type of input current: three-phase, space requirement height: 2,050 mm, space requirement length: 6,700 mm, space requirement width: 4,600 mm, No. 3289 Corner cleaning machine Rotox EPA 479 + WTS 427 Used, year of construction 2011 (overhauled 2025), good condition, annual maintenance According to our customer / the previous owner, the machine is fully functional and can be inspected on site CNC corner cleaning machine for welded PVC window frames and sashes Turning table WTS 427 for automatic infeed, outfeed and turning of the frames Automatic processing of all 4 frame corners Mobile control console with Windows-based PC visualisation Working range Outer frame size min. 350 x 350 mm, max. 3000 x 3000 mm Clear inner dimension min. 190 x 190 mm Profile width 40 - 140 mm, profile height 40 - 180 mm Pneumatic workpiece clamping Machining units Knife unit for visible surfaces, top and bottom Vertical CNC milling unit for the gasket groove Knife units for inner corners, vertical with draw knife Radius unit and inner corner bevel Outer corner milling unit with contour milling disc, tool Ø 170/200 mm, 5500 rpm Horizontal milling unit Outer corner plunge knife unit Tooling as per tool list with contour milling disc Ø 190 mm, carbide milling cutters as well as visible surface knives, draw knives and plunge knives Programs and tools set up for the profile system previously used Connected loads Power supply 3/N/PE 400 V, 50 Hz Current consumption 21 A, upstream fuse 3 x 32 A slow-blow Operating pressure 6 - 7 bar Air consumption approx. 430 l/frame CE marking Installation dimensions approx. 6700 x 4600 x 2050 mm LWH Machine without turning table approx. 2000 x 1800 x 2050 mm LWH Weight approx. 2400 kg Sale on behalf of customer, ex location near 37073 Göttingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Fodps Ah I Dkjfx Ah Esgi Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: excellent (used), Year of construction: 2000, Robust pivoting milling machine T 26, pivoting from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Pivoting angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the pivoting angle is displayed in the upper display, and then adjusted on the stop, thus enabling settings to be made according to drawings. Four speeds: 3000, 4500, 6000, and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for total adjustment and infeed stop separately, as well as input of the cutter diameter, with automatic calculation of the cutting depth. Stop with lifting device, can be pivoted away (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Folding stop for plunge milling. Workpiece clamping device Aigner Centrex. Fgedpfxjzbm Tfe Ah Esi Original Martin cast iron table, left 500mm, right 500mm with two insert guide rails. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed power socket, can be switched on from the control panel. Comfort stand with electrically height-adjustable feed support, which can be pivoted away for machine setup and then easily locked into place. Dust extraction port 2 x 120mm. Compressed air connection 6 bar. Emergency stop switch. Some parts of the machine have been repainted (special color RAL1015). V-belt renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in stock and ready for demonstration, see "other offers from this supplier".