Year of construction: 1998, Condition: like new (used), double-sided machine for formatting the edge of the workpiece edge banding and finishing of various edge materials from the roll up to 3 mm edge thickness. Use as first machine in a machine line for longitudinal throughfeed. Fixed fence side left, moving side right. basic machine: - with continuous machine column - Glue roller drive at feed stop - Glue container lift at feed stop - Glue container clamping workpiece actuated. workpiece transport device: - rolling block link chain with ball bearings - chain track with precise, hardened running and guiding surfaces - magnetic motor braking of the transport chain - infeed device with 3 inclined rollers - intermediate transport at the outlet 400 mm long. Dkslq Asd A Ud Rohhbol upper pressure: - with driven V-belt - motorized height adjustable width adjustment: - linear guide as well as rolling guides on hardened supports - motorized rapid/creep drive - ball screws and cardan drives for precise positioning - digital position display paint finish: - Homag textured paint gray RDS 240 80 05 Electrical equipment: - Operating voltage 380/400 V, 50/60 Hz - Control voltage 24 V - control cabinet mounted, installed according to Euronorm EN 60204 - electronic frequency converter with motor brake function - manual switch for setup mode Homatic electronic control NC21 control system Technical data: - Feed infinitely variable 10 - 32 m/min. - Workpiece protrusion fixed 30 mm - workpiece thickness 12 - 40 mm - Working height up to upper edge of chain 950 mm - Working width double-sided min. 240 mm - Working width double-sided max. 1.500 mm - edge material roll 0,3 - 3 mm - Edge cross-section max. - for PVC 135 mm2 - for veneer 100 mm2 - roller diameter max. 900 mm - ground conditions must correspond to the foundation plan Compact double hogger longitudinal 4,5 kW KD10 Free space for subsequent installation of a standard hogging unit controlled 4,5 kW Noise protection Format part Gluing part A3 Noise protection aggregate part basic length Workpiece protrusion adjustment automatic adjustment pressure zone Optimat Edge folding device Cross-cut unit HL81 chamfer/straight free space - 1.050 mm for cross-cut unit pre-milling unit 0,55 kW Free space 350 mm for pre-milling unit Milling unit 0.4 kW Milling unit 0,4 kW chamfer/radii autom. Universal milling unit 4 kW controlled fettling unit profile pneumatic adjustment fettling profile Edge heating white break Electronic width adjustment EB 02 Space requirement: length 6.650 mm x width 5.200 mm Total connected load: 72 kW Rated current: 125 A Total extraction capacity: 18,690 cbm/h Air speed: 35 m/sec. Compressed air consumption: 45 NI/cycle Machine is factory reconditioned, as new, warranty

Condition: ready for operation (used), Functionality: fully functional, overall weight: 800 kg, working height: 870 mm, power: 11 kW (14.96 HP), workpiece width (max.): 70 mm, Technical data: max. edge thickness: 5mm / 8mm Dkolq Ahheug Uqasbjl max. workpiece height: approx. 40mm / 50mm min. workpiece height: approx. 250mm / 300mm min. Workpiece width: approx. 70mm Feed speed: approx. 11m/min Ready for operation: approx. 4.5 min Power consumption: approx. 11kW Electrical connection: 230/400V / 50/60 Hz Work table height: 870mm Dimensions (LxWxH): 4100x1400x1300mm Condition and details see pictures

Condition: excellent (used), Gluing unit Printing station Dkslq Ajttu Syehhbol Up and down cutter Length 2.65 Width 0.86 Height 0.9 m

Year of construction: 1999, Condition: good (used), Edge banding machine IMA Compact MFA / F / 5212 Year of manufacture 1999 S/N 06601 max. edgebanding thickness:12 mm min. workpiece thickness:10 mm max. thickness of roll material:3 mm feeding speed : 12 m/min adjustment of the jointing ruler : manual heating time : 10 min Joining unit : Yes, with 2 milling units Automatic roll magazine : Yes Cross cut shear up to : 0.2 - 3.0 mm Solid edge magazine : Yes Preheating of the board by radiant heater autom. gluing with glue tank granulate crosscut saw angle setting by program Multifunctional unit rounding unit/corner copying 2 motors Profile scraper Flat scraper Buffing unit Aggregate display mech.numerical display Control mode via control panel Delq Ahhsia Naqebskl operation selector switch/ push buttons protective hood weight approx.2500 kg Dimension L x W x H 6500 x 1000 x 1600 mm CE marked technical data under reserve

Condition: used, Milling unit Fine milling unit bottom and top good condition function tested Delq Asqwdu Rshhbokl

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor Djlq Ahjb A Nm Ujhbekl -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Recording diameter: 16 mm -Number: 12x motors available -Price: per piece -Weight: 3 kg/piece

Year of construction: 1988, Condition: reconditioned (used), Bonding height max. 60 mm thickness 0,4 - 20 mm cross-cutting shear up to thickness max. 3 mm compressed air 6 bar weight approx. 2.800 kg Gluing system roller with glue pot on top 8 l suction connection 2 x 150 mm space requirement 6.000 x 1.000 x 1.800 mm Units: glueing, pneumatic cross-cut shear, double cross-cut saw, pre-milling, fine milling, free space after the protective hood Magazine plate for roller and bar HL 27 8° - magazine left machine sliding chain plate dimension 60 mm long 80 mm wide top pressure with compound V-belt 70 mm wide top pressure adjustment manual with sico-counter Infeed ruler SM gluing section with 8 l glue pot 4-roller pressure zone cross-cut unit with 2 motors 165 V/1 kW/300 Hz/18.000 rpm flush trimming unit with 2 motors 165V/1,1 kW/300 Hz/18.000 rpm top and bottom probing chamfer milling unit with 2 motors 165 V/0,6 kW/300 Hz/18.000 rpm top and side probing Adjustment by probing by means of sico counters free space 550 mm for mounting of further aggregates noise protection hood over machining units - 2 doors Chip conveyor belt Feed gear adjustable converter 300 Hz, 10 kVA Dkelsn Ut Idsq Ahhbsl rated voltage 400 V, 3 ~ rated current 40 A Roller rail

Condition: new, Year of construction: 2024, Functionality: fully functional, Hebrock edge banding machine type: F 4 Year of manufacture 2024 Se No. F 4371 / Incl. special equipment: - Quick-change preparation for corner milling machine No. F4/08/4 - Additional change motor for corner milling machine No. F4/08/5 - Radius scraper (pneumatic excavation) No. F4/9 - Multi-radius scraper (R2/1) No. F4/09/4 Dkolq Ahevkv Elehbjl - Spray device for release agent No. F 4/24/1 - Pneumatic 3-point adjustment No. F 4/30 - Joining up to 50 mm workpiece thickness No. F 4/31 Machine can be put into operation on site by Hebrock. (Factory instruction) Costs: €798 + VAT List price of the machine including equipment: €49,110 excluding VAT Machine available immediately

Condition: excellent (used), Gluing machine Dkolq Ahottu Riehbjl Guillotine cross-cut saws milling cutter Scraper Polishing machine

Condition: good (used), Year of construction: 1998, Functionality: fully functional, Stefani Ibimatic Double Edge Bander Year 1998 S/N NH 002993 Manufacture StefaniS.p.A. Italy Edge banding min / max 14-65mm Thickness min 0,3mm Max size of ABS 3 x 35mm Panel thickness min/ max 60mm Panel size 220- 3200mm Working edge 30-75mm Distance between the edges 400mm Adjustable feed speed from 6 to 36 m/min Units: 1+1 front milling units, 4 kW, pneumatic 1+1 air blast for cleaning the workpieces 1+1 gluing station / hot melt adhesive unit GR_HMP-P HM-P GLUING UNIT FOR STRAIGHT EDGES The device is designed for gluing straight edges using a thermo-meltable adhesive with a removable container container and a premelter for quick melting The unit includes A Glue container B Strip storage table C Pneumatic device box D Support base for strip storage E Guillotine shears F Side pusher G Inclination of the glue unit H Mobile table top 1+1 feeding device for edge trims, 5 stations 1+1 head cutting unit, 0.35 kW, 12,000 rpm 1+1 equalizing unit, 1 kW, 12,000 rpm Dkelq Ahhstrgy Nsbjl 1+1 chamfer trimming unit, 0.5 kW, 12,000 rpm R14/R25, diameter 80 mm, 12,000 rpm 1+1 head rounding unit with two 0.35 kW motors 1+1 milling unit, 4 kW, right side, left side empty space ( U28+U55), diameter 125mm- RPM 12,000 1+1 Self-adjusting scraper RCA 95 1+1 Brush / buffing unit 0,29 kW, 1500 rpm SPO ( 150/50x 50mm ) 1+1 ABS strip color brightener, 1600 W

Condition: as good as new (ex-display), Year of construction: 2024, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, Corner rounding unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 –3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 10,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel →Rotatable control panel with 10,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts Dkjlq Ahjd R U Adehbol →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC ed 67641340e9686

Year of construction: 1994, Condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm Dkjlq Ahju Scpqohbsl -Weight: 89 kg

Condition: good (used), Year of construction: 2004, Functionality: fully functional, double-sided Homag format processing and single-sided edge banding machine PROFI KFR23/07/03/PU/45 basic machine Workpiece transport device - continuous chain tracks - rolling block link chain with ball bearings on running and guide surfaces top pressure - with driven, continuous composite V-belt Width adjustment of the moving side - Electronic width adjustment with rapid/creep speed + digital position indicator Homatic electronic control NC21 control unit Industrial computer 68040 with 16 MByte RAM 12.1" color monitor with PC-compatible keyboard built into the control panel at the infeed Remote diagnosis Feed infinitely variable 10-40 m/min. Workpiece protrusion 40 mm Dsljrfx Eroq Ahhbjkl Workpiece thickness 8-60 mm Working width double-sided min. 240 - 270 mm Working width double-sided max. 4,500 mm Machine infeed MII+500 1 level for transferring workpieces Infeed device 10 rollers can be folded up Automatic center support KF/FL/KL 20 Release agent sprayer top/bottom Compact double hogger lengthwise/crosswise 6.6 kW KD11 PU34 copact gluing unit Glue application unit QA34 Gluing unit A3 - 68 rolls Hot melt glue unit A34 Magazine A3 - 68 rolls - Edge thickness 34 x 0.3 - 3 mm - Edge thickness 34 x 0.3 - 2 mm Flexible edge sequence control Pressure cone C - 1 driven pre-press roller diameter 150 mm - 6 post-pressing rollers diameter 70 mm Snipping unit HL04 FASE/GERADE Pneumatic adjustment FASE/GERADE Pre-milling unit top and bottom 0.55 KW Shaping trimming unit FK13 8-fold automatic Automatic MN21 multi finishing unit Finishing unit FA11 top / bottom - Finishing unit glue joint Brushes in the gap Barcode reader Hand-held scanner Wireless Input PC21 instead of NC21 Network connection Ethernet

Condition: reconditioned (used), Year of construction: 2017, RECONDITIONED SINGLE-SIDED EDGEBANDING MACHINE BRANDT MODEL:AMBITION 1650 FC Dkelq Aephnzajhhbjl Machine completely regenerated New dice , new rollers , regenerated aggregates , set of new tools glue pot regenerated and much more SUMMARY,EQUIPMENT: GLUING AGGREGATE 2 X 2,2 KW 200 HZ GLUING UNIT A12 CUTTING UNIT TRANSVERSE CHAMFER/STRAIGHT 2 X 0.35 KW MILLING UNIT 2 X 0.55 KW COUNTER-ROTATING FORMING UNIT 2 X 0,35 KW WD 60 PROFILE SCRAPER WITH QUICK-CHANGE HEADS FREE SPACE GLUE JOINT SCRAPER POLISHER - Feed speed ¦ 8 - 18 m/min - Max. feed rate with shaping knife ¦ 11 m/min - Max. feed rate with shaping knife In conjunction with VKNR 4839 ¦ 14 m/min - Working height ¦ 950 mm - Pneumatic connection ¦ min. 6 bar - Overall length ¦ 5,760 mm

Condition: excellent (used), Adhesive unit Guillotine Chop saws Straight cutters Scraper Polishing machine Djlorzaavjq Ahhbokl Without pre-milling

Year of construction: 1999, Condition: good (used), Edgebander Biesse Polymac ERGHO 5, year 1999 Biesse Italy S/N 80709 max. panel thickness 10-45 mm min and max banding strip heught 13-60mm max thickness of banding material in rolls: 0,4mm- 3mm min. panel width 50 mm min. length 150 mm operating speed m/min 10/20 Technical information: Glue Pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting Edge Trimming unit +Chamfering RI 700 Compact edge scraper RBK501 Dslqsgtx Aqj Ahhbskl Brushes SP700 Edge Sanding unit LV 700 heated infeed guide PLC control panel support guide Large diameter roll holder edge cutting device for 3mm thick rolled edges 400 V , 50 Hz CE- marked Dimensions of the Maschine: ( Lx W x H ) = 4950mmx 1700mm x 1530mm 2900 Kg Technical information under subject of correction

Condition: not inspected (used), Year of construction: 2004, Functionality: unexamined, HOMAG edgebanding and processing line, KF 61/08/QA/25 edgebanding machine, KF-63/08/QE/15 edgebanding machine, Optimat TDL 310/25/12 turntable, year of manufacture 2004, Dkolq Ahhorn Sl Ijbsl L=25 m

Year of construction: 1994, Condition: used, Gluing unit, gluing part, gluing head, heating tank for edge banding, edge banding machine, melting unit with granulate container for edge processing machine Delq Aheu Scqujhbekl -Manufacturer: Paul OTT, aggregate carrier from edge banding machine U 206 -Individual components: see photos -Dimensions: 780/400/H230 mm -Weight: 27 kg/piece

Condition: ready for operation (used), Year of construction: 2000, Holzher 1417 edge banding machine Gluing thickness 8 mm feed speed 11 m/min Joint trimming with DIA tool type 1961 Snipping unit 1918 Flush trimming unit 1823 Multifunction unit 1942 Scraper unit 1929 R2 Copy trimming unit 1983 Surface scraper unit 1964 Buffing unit 1944 K Condition checked for function Year of construction 2000 Djljuaqh Usq Ahhbjkl Price 12000.

Condition: excellent (used), 2 pre-cutters gluing unit Guillotine Drip unit with 2 saws Straight cutter Dolq Ajulh Nushhbjkl Rounding cutter

Condition: not inspected (used), Year of construction: 1981, Functionality: unexamined, HOMAG single-sided edge banding machine type KL39/9C/S 3D Delsrn Sp Ssq Ahhbskl

Year of construction: 1994, Condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 Djlq Ahou Rv Rxohbekl -Milling motors: Type HF 08.2 -Power: 0.6 kW / 200 Hz -Speed: 1200 rpm -Adjustment ranges: see photos -Number: 2x milling unit available -Price: per piece -Dimensions: 530/490/H600 mm -Weight: 67 kg/piece

Condition: used, SCM Selecta C edge banding machine Edge banding height 10-60 mm edge banding thickness 0,4-25 mm Caps Overlapping edgebanding bevels - 25 mm for solid wood Pivoting edgebanding unit for foil and ABS edges Radius scraper chamfering Buffing unit Space requirement Length 6345 Height 1530 Depth 1106 mm Dkslq Ahsddn Svohbsl scm_selecta (1)

Year of construction: 1994, Condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg Dolq Ahhou Rv Ttobjkl

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 6.5 kW -Output: 220 V 200 Hz -Power: 6.5 kW -for edge banding edge banding machine -Dimensions: 330/650/H270 mm Dsleu I Hn Neq Ahhbskl -Weight: 105 kg