Condition: used, Year of construction: 2020, Edge banding machine K36, 1 unit, with PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece; rabbeting cutter (incl. DIA tool) up to 3 mm cutting depth; glue reservoir with quick-change reservoir preparation, incl. adhesive dispensing device; high-frequency miter saw station (approx. 16,000 rpm); high-frequency milling station (approx. 16,000 rpm with separate pneumatic milling adjustment); corner rounding cutter (min. workpiece length 300 mm, max. workpiece height 40 mm); radius cutting blade; flush cutting blade (incl. pneumatic extraction); cleaning station; 1 free space for a 2nd milling station or a slot cutting saw (slot cutting saw only if the cleaning station is removed); robust chain drive, ball-bearing mounted double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, signal lamp for workpiece sequence. Technical data: Max. edge thickness: 3 mm Max. rabbet thickness: 3 mm Min. workpiece height: 8 mm Max. workpiece height: 60 mm Max. rabbet height: 40 mm Bdedpeznvqfsfx Amysf Min. workpiece length: 160 mm Feed rate: approx. 10 m/min Ready for operation: approx. 5 min. Power consumption: (400V – 3Ph – 50 Hz) Working height: approx. 900 mm Machine dimensions: approx. 5250x1250x2050 mm (L x W x H) Weight: approx. 1700 kg Dust extraction nozzle: 1x140 mm + 1x80 mm 8 mm version K36, 1 unit, quick-change fitting for corner milling cutter K36, 1 unit, extra charge for multi-radius cutting blade (R2/R1) K36, 1 unit, rabbeting up to 60 mm workpiece thickness K36, 1 unit, release agent spray device, plate K36, 1 unit, cleaning agent spray device, plate K36, 1 unit, nesting for milling station K36, 1 unit, nesting for radius cutting blade K36, 1 unit, pneumatic 3-point adjustment K36, 1 unit, Airtronic K36, 1 unit, extension of the support in the infeed and outfeed by 440 mm each; 1 unit. With the help of the plug-in extension of the infeed and outfeed of the table extension, Hebrock offers a solution for an enlarged support surface for improved workpiece handling by 450 mm. Level monitoring without reservoir, 1 unit. Thanks to a sensor on the top of the glue application roller, the operator can be shown a minimum glue level. A warning is displayed on the screen. Once this warning appears, a maximum panel processing length of 100 m (19 mm chipboard) is possible. Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Packaging surcharge, 1 unit Additional quick-change reservoir incl. level sensor Manufacturer: Hebrock Type: 36/14/1 Article No. H36/14/1, 1.0 unit Additional change motor for corner milling cutter K36 Manufacturer: Hebrock Type: 36/08/2 Article No. H36/08/2, 1.0 unit R1 Location: Supplier

Condition: good (used), Code: 0458 Brand: ARTECH BIESSE GROUP Model: SINGLE 89-N - CE Standard Edge bander for straight and shaped panels , for edges in wood, veneer, PVC, plastic laminate etc. - CE Standard Technical data: Working height up to 120 mm Edge thickness 0,4 - 3 mm Bedoznu Dwepfx Amysdf Minimum bending radius 20 mm Minimum panel length mm 300 Glue tank capacity 3 liters Motorized feed with adjustable speed Front extension for supporting large panels Work surface tiltable from 0 to 45 degrees Feed speed 4/16 mt/min with variable speed drive Trimmimg unit consisting of 2 superimposed motors Total absorbed power Kw 5,2 Working pressure bar 6 Overall dimensions mm 1300 x 900 x 1380 h Weight kg 350

Condition: used, Holz Her Auriga 1308 XL Black Edition compact design – edge thickness 0.4 – 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor Pre-milling unit for attaching before the gluing section Edge magazine fully automatic for coil and strip material Bdsdeznuncspfx Amyef Glue application station GLU JET cartridges + PU gluing Fully automatic operation of the units via NC servo axes Workpiece height 6-60 mm Automatic glue height adjustment High-gloss package Pressure unit pneumatically controlled Cutting unit pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of the cutting saw angle from 0-10° Milling unit MOT4, flush milling 8 mm, radius milling - chamfer milling via NC axes Shaping milling unit – rounding of edges up to edge thickness 3mm in a single pass via NC axes Scraping blade unit MOT for chamfers and radii with 2 scraping blade holders via NC axes Surface scraping blade unit – finishing Buffing unit – polishing Spray system in the infeed and outfeed area complete DIA tool set included First delivery in 2018 Machine in TOP CONDITION from a lease return available from stock in Lieboch

Condition: used, Holz Her Auriga 1308 XL POWER Compact design - edge thickness 0.4 - 8 mm Motorized bridge adjustment PLC screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor Bdjdpfx Amjznucysyef iTronic adaptive pressure and adhesive quantity control, and flushing routine fa.s.t. setting technology "Tool change in position" Long infeed guide with motorized adjustment Pre-milling unit for application before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU adhesive, with sensing nozzle Workpiece height 8-60 mm High-gloss package Pressure unit, pneumatically controlled Trimming unit, pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the trimming saw Multi-function milling unit FR301 MOT6, flush trimming 8 mm, radius milling – chamfer milling 15° via NC axes Profile milling unit FF301 MOT1 – rounding of corners up to edge thickness 3 mm or alternatively chamfer = 45°, working height 12 – 60 mm, postforming possible Scraping unit ZK301 MOT4, for chamfers and radii with 2 scraping blade carriers via NC axes Surface scraping unit FK701 with pre- and post-sensing - finishing Buffing unit - polishing Spray system in the infeed and outfeed area Spray system with lubricant for high-gloss edges Complete DIA tool set included First delivery 2022 Machine in TOP condition, taken out of service - small business Available from stock, Lieboch

Condition: excellent (used), Year of construction: 2024, Hebrock adhesive basin / exchange basin For Hebrock K36 Bdsdpfeznnlhox Amyjf Year of manufacture: 2024 Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Catalog number: HZ014 – preliminary milling – edge trimming – new machine, in stock – CE certificate – professional Bedpfx Amsza Emhsyjdf TECHNICAL DATA panel thickness 8-45mm edge thickness 0.4 mm – 3 mm min panel width 90mm min panel length 170mm feed speed 9m/min pre-milling 12000 rpm front/rear milling 12000 rpm top/bottom milling 12000 rpm edge trimming 12000 rpm polishing 3000 rpm feed motor power 1.13kW glue tank heating power 1.315kW pre-milling power 1.5kW pre-heating power 0.4kW glue spindle power 0.25kW front/rear milling power 0.22kW top/bottom milling power 2×0.37kW edge trimming power 0.37kW polishing motor 0.12 kW and 0.18 kW motor 6.16kW working height of the table 960mm extended support width 560mm extraction connection 3x125mm dimensions L/W/H 3731x720x1636mm weight 915kg The Holzing G-MAX 480 edge banding machine with pre-milling, saw cutting, top-bottom milling, edge trimming, radius scraping, and polishing ensures a high-quality final result on the workpiece. The veneer can be in rolls up to 3 mm thick and in strips up to 4 mm thick. The machine also has a glue tank with a capacity of 1.2 kg. Net price: 99000 PLN Net price: 23571 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Preliminary milling unit Edge banding glue station for granules Capability to glue edge banding from 8-60 mm Feed rate of 11 m per minute Control panel with temperature setting Preliminary trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Pressing zone with three rollers Cutting wheels to trim excess edge banding on the edges Top/bottom milling unit with profiled milling cutters Profiled sanding unit Bdodpfxezqapko Amysf Flat sanding unit Corner milling unit Polishing unit Year of manufacture: 2013

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Space requirement: 2800 x 1200 mm, Weight: approx. 450 kg, Edge thickness: 0.4 - 5.0 mm, Strip material: width x height 5 - 49 mm, Feed rate of workpiece: 8 m/min, Power of feed motor: 0.75 kW, Max. workpiece dimensions: length 210, width 70, thickness min./max. 10–45 mm, Mains voltage: 3 × 400 V. Bdedpfx Ameznbrzoysf

Condition: new, Year of construction: 2026, Feed speed 9 m/min Board thickness 12 - 45 mm Minimum board dimensions (L x W) 90 x 170 mm Worktable height 960 mm Bdsdozp Nz Hepfx Amysf Table extension (steady rest) 560 mm Extension connector ⌀ 125 mm Installed power 6.1 kW Pre-milling 3000 rpm Front/back 12,000 rpm Top/bottom 12,000 rpm Polishing 3000 rpm Machine dimensions 3960 x 720 x 1748 mm Weight (net/gross) 800 / 950 kg Feed motor power 0.75 kW Glue tank heater motor power 1.315 kW Pre-milling motor power Milling 1.5 kW Plate heating motor power 0.125 kW Glue spindle motor power 0.25 kW Front/rear cutting motor power 0.37 kW Top/bottom cutting motor power 0.37 kW x2 Corner trimming motor power 0.37 kW Polisher motor power (top/bottom) 0.12 kW x2 (3-phase), 0.18 kW x2 (1-phase) Touchscreen control panel Air consumption 350 L/min Minimum extraction power 5 kW (for effective dust extraction from the edge bander)

Condition: new, Year of construction: 2026, Edge thickness 0.4 – 3 mm Glue board thickness 12 – 45 mm Difference between edge width and board thickness max. 4 mm Minimum length of glued boards 190 mm Minimum width of glued boards 90 mm Mechanical feed speed 7 m/min Glue temperature 130–250°C Tank capacity 1.2 l Pre-milling head speed 12,000 rpm Linear milling cutter speed 10,500 rpm Cutting blade speed 8800 rpm Polishing disc speed 2800 rpm Installed power 4.91 kW Feed motor 0.75 kW Heating motor 0.25 kW Bjdozp Nycopfx Amysdf Final cutting motor 0.18 kW Linear milling motor 0.55 kW Polisher motors 2 x 0.18 kW Pre-milling motor 0.5 kW Compressed air pressure 250 L/min Extended table width (steady rest) 560 mm Working table height 856 mm Shipping dimensions (L x W x H) 2820 x 720 x 1320 mm Net/gross weight 500 / 632 kg

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Total length 3700 mm Bedpfszmy N Nex Amyodf Feed speed 8 m/min. Weight 900 kg

Condition: as good as new (ex-display), Year of construction: 2023, 0,4 - 5 mm Workingpiece thickness from to 10 - 60 mm Feed speed 12 m/min. Bsdpfx Amsxh Spkeysdf

Condition: new, Year of construction: 2013, 0,4 - 15 mm Workingpiece thickness from to 10 - 60 mm Bdsdpsx Dng Rjfx Amysf Feed speed 18 m/min.

Condition: used, Year of construction: 2017, power: 20 kW (27.19 HP), edge thickness (max.): 12 mm, feed rate X-axis: 20 m/min, The machine has the following configuration: Pre-milling unit End-capping unit Number of motors in end-capping unit: 2 Rough milling unit, top and bottom Number of motors in rough milling unit: 2 Edge rounding unit Number of motors in edge rounding unit: 2 Edge trimming unit Glue application unit Edge finishing unit Number of motors in edge finishing unit: 2 TECHNICAL DETAILS Workpiece processing Min. board thickness: 8 mm Max. board thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 20 m/min MACHINE DETAILS Total connected load: 20 kW EQUIPMENT Preheating lamps for workpiece sides Edge roller magazine Glue reservoir for EVA hot melt adhesive Spray unit Bdodszmtldjpfx Amyof The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7981

Condition: used, Year of construction: 2008, power: 41 kW (55.74 HP), edge thickness (max.): 3 mm, controller model: ICOS OPEN, The machine has the following configuration: Pre-milling unit Manufacturer model: R3 L20 Engagement control: Automatic, time-controlled Motor power: 4 kW Speed: 9,000 rpm Edge processing Number of edge processing units: 10 Crosscut saw unit Manufacturer model: 8.42/39/B Number of motors: 2 Motor power: 0.6 kW Speed: 12,000 rpm Flush trimming and rounding unit Manufacturer model: 08.055 Number of motors: 0.6 (?) Motor power: 1 kW Speed: 12,000 rpm Corner rounding unit Manufacturer model: 08.342 Number of motors: 2 Motor power: 0.66 kW Speed: 12,000 rpm Scraper blade unit Manufacturer model: 08.50 Belt sanding unit 1 Manufacturer model: 08.62 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 2 Manufacturer model: 08.062 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 3 Manufacturer model: 08 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 4 Bsdpfozmtkaex Amyodf Manufacturer model: 08.617-2 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 5 Manufacturer model: 08 Processing unit 10 Manufacturer model: 08.190 Motor power: 4.5 kW Speed: 9,000 rpm TECHNICAL DETAILS Workpiece dimensions Max. panel height: 60 mm Min. panel length: 130 mm Min. panel width: 65 mm Edge material Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm Feed Max. feed rate: 30 m/min Pressure: Rubber belt Number of panel sizing/milling units: 1 MACHINE DETAILS Control system: ICOS OPEN Total connected power: 41 kW EQUIPMENT Number of panel sizing/milling units: 1 Lamps for preheating the panel side Edge roller magazine with 2 positions PUR pre-melting unit Pressure roller set with 5 pressure rollers Spraying unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 5657

Condition: used, Year of construction: 2014, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, TECHNICAL DETAILS Workpiece Dimensions Min. panel height: 10 mm Max. panel height: 60 mm Min. panel width: 70 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 18 m/min Feed and Guidance Pressure with idler rollers Panel support guides Unit for Panel Processing Pre-milling unit Automatically timed engagement Motor power: 2.2 kW Edge Gluing Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system: AIRTEK Number of pressure rollers: 4 NC-controlled Edge Processing Units Number of edge processing units: 7 End-capping unit Number of motors: 2 Motor power: 0.35 kW Fine milling unit for flush trimming and rounding Number of motors: 2 NC-controlled Motor power: 0.55 kW Corner rounding unit Manufacturer model: WD60 Motor power: 0.35 kW Rough milling unit Motor power: 3.5 kW Edge trimming unit NC-controlled Glue application unit Polishing unit Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Control and Safety Machine programming software: PowerControl PC20 Safety standard: CE marking Electrical Data Total connected load: 22 kW EQUIPMENT Pre-milling unit Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system AIRTEK Bodpfx Amjzmtivoysdf 4 pressure rollers End-capping unit Fine milling unit for flush trimming and rounding Corner rounding unit WD60 Rough milling unit Edge trimming unit Glue application unit Polishing unit Spray unit Machine programming software PowerControl PC20

Condition: used, Year of construction: 2001, Workpiece thickness min./max.: 6/45 mm Edge banding thickness: 0.4 - 3 mm Edge banding height max.: 51 mm Bdsdpfxsy Dd Iyj Amyef Edge banding strip length min.: 350 mm Edge banding overhang in height per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Overall length: 3700 mm Width: 1440 mm Height max.: 1970 mm Workpiece infeed height: 850 mm Weight: approx. 850 kg Storage location: Nattheim

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 220 V, NEXUS: Bdedpfxjzphlwj Amyjf Trusted by Professionals Proven Performance in Contour Edge Banding A proven contour edge banding machine designed for easy operation by users of all experience levels. Continuously improved through real customer feedback, NEXUS incorporates innovative features that significantly increase the speed and efficiency of your production process. Key innovations include a 3D laser scanning system that accurately copies the panel contour and measures the required edge band length with millimetric precision, a chassis-integrated edge band roll feeding table, and convenient automatic or manual operating modes selected through the touchscreen control panel.

Condition: used, machine/vehicle number: 008660, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Bjdpfx Aszmmt Ujmysdf Grooving Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 008662, Position 1: Single Edgebanders IMA-NOVIMAT CONTOUR I/G80/790/R3 Position 2: Panel Return Systems IMA-NOVIMAT CONTOUR I/G80/790/R3 Bdsdpozmmtnjfx Amysf

Condition: used, Year of construction: 1996, Brandt edge banding machine in good, used condition. KTV51 - Year of manufacture 1996 The machine was purchased used and only used occasionally. The machine is being sold as part of the closure of our carpentry business. Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. Bsdpfxezpflnj Amyedf An inspection of the machine is possible by arrangement. A fixed inspection date is scheduled for July 18 or August 1 from 10 a.m. to 2 p.m. at our premises in Stemwede.

Condition: ready for operation (used), Year of construction: 2017, Edgebander manufactured in 2017. This SCM Olimpic K360 T-ER1 features a feed speed of 11 m/min and accommodates edge thicknesses from 0.4 to 6 mm. It includes a pre-milling unit with counter-rotating diamond heads, an EVA glue unit, and a buffing unit. If you are looking to get high-quality edge banding capabilities, consider the SCM Olimpic K360 T-ER1 machine we have for sale. Contact us for further details. Bodpfx Aezmgvijmyjdf • Feed speed: 11 m/min • Edge thickness: 0.4–6 mm • Panel thickness: 8–60 mm • Min. workpiece: 140 x 90 mm • Power supply: 400 V / 3~ / 50 Hz, 23 AAggregates: • Pre-milling: 2 counter-rotating diamond heads (up to 3 mm removal) • EVA glue unit • Pressure zone with driven roller + 2 pressure rollers • End-cutting unit K-2 (straight/bevel, automatic switching) • Top/bottom trimming: flush, radius, chamfer • Corner rounding R1/R2 • Profile and flat scrapers • Buffing unit • Anti-adhesive fluid system (2 fluids) • Edge roll feeder

Condition: ready for operation (used), Year of construction: 2023, Edgebander manufactured in 2023. This BIESSE Akron 1440 A features a panel height range of 10-60 mm and an edge height of 14-64 mm. It supports roll edge thickness from 0.4-3 mm and strip edge thickness from 0.4-12 mm. The machine includes a chain feed speed of 12 m/min and is equipped with an NC axis package for automatic setup. If you are looking to get high-quality edge banding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. edge banding machineBrand: BiesseType: Akron 1440 Ayear of manufacture: 2023Technical data: • Panel height: 10–60 mm • Edge height: 14–64 mm • Roll edge thickness: 0.4–3 mm • Strip edge thickness: 0.4–12 mm • Panel overhang beyond the chain: 25 mm • Panel length: 140–3200 mm • Minimum panel width (with panel length 140 mm): 85 mm • Minimum panel width (with panel length 250 mm): 50 mm • Chain feed speed: 12 m/min • Distance between panels: 450–650 mm • NC axis package for automatic machine setup • Return conveyor installation kit • Notes: • Minimum panel height 8 mm with max edge thickness 1.5 mm. • Values marked “depending on the selected working units.” Max permissible feed speed 12 m/min. • Aggregates/working units: • Anti-adhesive spraying unit ADZ02 • Pre-milling unit RT02 • Two high-frequency motors, each 1.8 kW, 12,000 rpm • Gluing unit VC-511 Bedpfx Ajzmglwsmyjdf • Processes EVA and PUR granulated adhesives • Adhesive container capacity: 1.5 kg • Pressure zone • 1 driven pressure roller, Ø 100 mm, independently adjustable pressure • 2nd and 3rd non-driven pressure rollers, Ø 60 mm, anti-adhesive coating, opposing conical, pneumatically adjustable • End trimming unit IT-70-S • Two high-frequency motors, each 0.8 kW, 12,000 rpm • Straight (0°) or inclined trimming, adjustable 0°–15° • Antistatic/cooling liquid spraying unit for end trimming • Fine milling unit RF02 • Two high-frequency motors, each 0.65 kW, 12,000 rpm • Corner rounding unit • Two high-frequency motors, each 0.65 kW, 12,000 rpm • For straight and postforming/softforming profiles on 90° and 180° corners • Edge scraping unit RB02 • Manual switching between two processing profiles • Glue joint scraping unit RC02 • Buffing unit SZ02 • Two motors, each 0.37 kW, 2,800 rpm • Hot air blower unit PH-501 • Power: 2 kW; continuously adjustable temperature control

Condition: excellent (used), Double side - Independent Machine (1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 10 (ca.) / 60 Working width (min/max) mm 260 (ca.) / 3200 Numerical Control MAESTRO PRO EDGE /Software EYE-M Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) with CNC vertical adjustment Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side + Glueing Unit (PUR Glue + Quick Melt system) CNC adjustment of the edge height Band Pressure zone (N.C. adjustment) + Edge coils support (No 6 reels) CNC positioning of the edge Bdjdszmfg Tspfx Amyjf Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C. adjustment) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Milling grooving unit U (1 x Kw 5,5) on Left-side Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Bdedpfxoy In A Ns Amyef Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr