Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h built in 1993 1 x transport fan 6.1 kW, power 57 m³/h built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Bjln Uf Revviyterewl Storage location: Nattheim

Condition: ready for operation (used), Overall dimensions: 2500 x 6000 mm Cyclone diameter: 2500 mm Cyclone height: 6000 mm Bweljwfrl Ajn Uf Rrel

Condition: good (used), Year of construction: 2022, Functionality: fully functional, type of input current: three-phase, filter area: 5.31 m², volume flow: 1,400 m³/h, negative pressure: 2,210 Pa, nominal flow rate: 884 m³/h, overall weight: 205 kg, total width: 830 mm, total length: 1,100 mm, total height: 1,600 mm, input voltage: 400 V, noise level: 71 dB, extraction nozzle diameter: 125 mm, tank capacity: 165 l, Return device with slight signs of wear. Serial number: 125PM2246040001 Year of manufacture: 2022 Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for vacuuming and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet Beln Uewgz T Ssf Rrewl All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the Chip container due to large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminum-coated polyester fleece, resulting in a long service life Filter comes standard with an antistatic design, tested and approved according to category M-BIA The fan is installed downstream of the filter If a warranty is stated in the item description and/or in the description of the scope of delivery, this does not affect your statutory rights against your seller. Please refer to the warranty conditions for the scope, duration, contents, and the guarantor. We assume no liability for printing errors, mistakes, or incorrect representations. Technical and visual changes are reserved. Some images show optional accessories. Delivery is subject exclusively to our terms of delivery and payment. Sales are made through specialist retailers.

Condition: used, - Vacuum Exhaust filter, the chips no longer come into contact with the fan wheel of the fan door. The chip garbage cans are permanently connected to the extraction system Belnswfq E Io Uf Rrewl and internally vented. - Manufacturer: Nestro - Type: NA/T - Volume flow approx. 9,450m³/h - 5 dust garbage cans, rollable, - Number of filters: 180 pcs. - Filter surface: 63m³ - Previously operated with return air - Filter dimensions: 90 x 1200mm - Suction line connections D450mm with non-return flaps - Filter with pressure relief surface - Year of manufacture: 1997 - Filter cleaning by pulse compressed air - Compressed air 6bar Dimensions: - Length: 4,410mm - Width: 1,005mm - Height: 2,750mm- Volt/HZ: 400/50 - Fan power: 11KW - Location: in stock

Condition: used, Year of construction: 2021, Flow rate: 7.697 m³/h Intake socket: 250 mm Filter surface: 50 m² Number of collection boxes: 2 Underpressure: 3.875 Pa Length of filter hose: 2.000 mm Main motor power: 11 kW Machine recognition: Yes Extinguishing automatic: Yes Air system: Underpressure Bweln Uf Rjwfgwgorel Automatic cleaning: Jet- cleaning Category of filter material: H3 Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: excellent (used), Excellent condition Intermediate filter with rotary valve Ring line to the silo Fan 30 kw 10,050 m3/h Soundproof box 400 mm intake pipe Bsln Uowfgauof Rrswl

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Bsln Uovvizkef Rrjwl

Condition: used, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine extraction systems for air volumes of up to 10,000 m³/h. can be used. Manufactured in accordance with the new EU standard EN 16770 they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the Bwjleu T Hrion Uf Rrsl the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 180 mm, Volume flow: 2,610 m³/h, Nominal volume flow: 1,832 m³/h, max. negative pressure: 2,450 Pa, Filter area: 13.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 2 pieces, Motor: 3.0 kW, Dimensions (LxWxH): 2,085 x 900 x 2,130 mm, Weight: 414 kg, Sound pressure level: 76 dB(A), Dust class: M incl.: an attached control cabinet

Condition: excellent (used), Two-bag extraction unit Alfarimini Alfa 2 Number of filter bags 2 Bwoln Uf Rewd Nwtsrel Number of collection bags 2 Bag diameter fi 500mm Connection diameter 200mm Power 3kw Rotation speed 2800 r.p.m Extractor dimensions 160x70x230cmH

Condition: used, I will sell a sieve, dust separator Bwsln Uowgiuqof Rrjl

Condition: used, Year of construction: 2021, Flow rate: 7.697 m³/h Intake socket: 250 mm Filter surface: 50 m² Number of collection boxes: 2 Underpressure: 3.875 Pa Length of filter hose: 2.000 mm Bwslnowd Slaj Uf Rrol Main motor power: 11 kW Machine recognition: Yes Extinguishing automatic: Yes Air system: Underpressure Automatic cleaning: Jet- cleaning Category of filter material: H3 Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: excellent (used), Year of construction: 1999, Mobil Jet Year of manufacture 1999 2.2 kW Intake manifold 120 mm Boln Ufswdvr Dj Rrowl

Condition: used, Year of construction: 1996, Vacuum system with rotary valve. Nominal flow rate: 12,500 m³/h. Filter area: 62.5 m². Weight: 1,350 kg. Maximum vacuum: 4,000 Pa. Maximum air pressure: 8.5 bar. Storage location: Customer. Bjln Uf Rsvviygsrowl

Condition: used, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine machines for air volumes of up to 10,000 m³/h can be used. Manufactured according to the new EU standard EN 16770, they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 200 mm, Volume flow: 2,495 m³/h, Bsln Ufsu T Dv Ej Rrswl Nominal volume flow: 2,262 m³/h, max. negative pressure: 2,000 Pa, Filter area: 14.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 3 pieces, Motor: 4.0 kW, Dimensions (LxWxH): 2,645 x 900 x 2,130 mm, Weight: 500 kg, Sound pressure level: 73 dB(A), Dust class: M incl.: an attached control cabinet

Condition: used, Year of construction: 1996, ALKO clean air filter system with fan, type UF 2. Nominal flow rate 10,000 m³/h. Filter area 50 m². Weight: 845 kg. Nominal pressure 4,000 Pa. Air pressure/connection max. 8.5 bar. Frequency control. Filter system with container and discharge system. (Prepared for connection to a briquette press). Return air duct included. Filter size approx. 3,000 x 1,250 mm. Total area approx. 4,000 x 1,250 mm. Good general condition. Beln Uf Revviymjrewl Storage location: Customer.

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Connection piece: 350 mm, Spigots: 5 pieces, Bolnou R Tb Uj Uf Rrswl nozzle diameter: 2x160,2x100,1x120 mm

Condition: used, Year of construction: 2002, Nominal flow rate: 3500 m³/h. Motor: 1.5 kW. Baffle area: 2000 x 1000 mm with top and side baffles. Storage location: Nattheim. Beln Uf Revviz Rsrewl

Condition: used, Suction collector Suction bell -used- Bwjln Ufsu R S Uyo Rrsl ----- Technical data ----- Connection piece: 300 mm, Nozzle: 5 pieces, nozzle diameter: 160 mm

Condition: used, Year of construction: 2016, POWER UNIT 350+ P-ZRS 1 piece 400 V, NW 355, nominal volume flow 7127 m³/h according to GS-HO-07, max. volume flow 10000 m³/h, compressed air cleaning, pre-separator, integrated automatic extinguishing system, installation with hopper and substructure 960 mm rotary valve for pressure-free discharge into a transport pipe or other disposal facility, power unit for 3 kW transport fan APU 140-350 Option 8ME&8S External 1 piece machine detection for up to 8 processing machines via converter coils or potential-free contact and automatic slide control for up to 8 electro-pneumatic or motor-driven gate valves in 24 V; external junction box for independent wall mounting fill level indicator via ultrasonic sensor 1 x Alko Power Unit 140-300 [sensor and housing] flashing lamp fault indicator 1 x fill level limit indicator (Retonovio) 24 V DC 1 x inclined tube auger for mounting on APU 350 P rotary valve ZRS 960 1 x consisting of: 1 x receiving hopper dimensions 1,500 x 140 x 280 mm primed, painted with plastic lining 1 x metal bend 45° 3.5 m metal combination pipe 4 x metal pipe couplings 5.6 m conveyor spiral 1 x drive unit 45° with 200 mm outlet including maintenance opening, overfill sensor shearing, drive shaft and grounding belt 1 x spur gear motor 400 V / 0.75 KW / 197 rpm. With special shaft and reinforced bearings. TW bimetallic switch "normally closed". 1 x pipe 500 mm long, DN 200 mm, galvanized. 1 x clamping ring for pipe construction, 2 mm, DN 200 mm. Note: Flow rate is 1.5 m³/h. Chipper - specification for friction-free operation: perforated screen less than or equal to 15/20 mm. Additional charge for capacity increase to 10,000 m³/h. Item No. ER-M-161432. 1.00 pc. as described above in the machine description. Bwolovviyaon Uf Rrjl Storage location: Nattheim

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Bwjlneu R S Uge Uf Rrsl Connection piece: 300 mm, Nozzle: 5 pieces, nozzle diameter: 140 mm

Condition: used, Year of construction: 2002, Extraction diameter: 160 mm Nominal flow rate: 2050 m³/h Motor power: 3.0/0.18 kW Nominal speed: 3000/1000 rpm Weight: approx. 310 kg Bwolnowgnucs Uf Rrol Storage location: Supplier

Condition: used, Extraction fan / blower NESTRO -used- Steel fan wheel ----- Technical data ----- Bjln Ueu R S Igjf Rrswl Pipe diameter: 300 mm, motor: 7.5 kW

Condition: used, RIDEX DM 350 clean air extraction unit with FU -used- Bolju R S Sfen Uf Rrswl with frequency converter incl. pressure transmitter, Air filtration by means of filter bags, motorized cleaning, mobile collection container, incl. automatic fire extinguishing system, Year of construction 2022 ----- Technical data ----- Extraction nozzle Ø: 350 mm, Nominal volume flow: 6,927 m³/h, Max volume flow: 10,000 m³/h, Negative pressure Vnenn: 2000 Pa, Number of bags: 4 pieces, Motor: 15 kW, Dimensions (LxWxH): 4,600x1,300x2,600 mm, Weight: 1,320 kg

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Bwjlju R S A Ron Uf Rrsl Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency converter, Pressure transmitter for demand-based control Integrated pre-separator, Integrated automatic extinguishing system - High suction capacity - little space required - 100 % air recirculation without temperature loss (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options Bwolneu R S E Eo Uf Rrol ----- Technical data ----- Extraction nozzle Ø: 355 mm, Nominal volume flow: 7,127 m³/h, max. volume flow: 10,000 m³/h, max. negative pressure: 3,347 Pa, Filter area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 15.0 kW, Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm, Sound pressure level: 73 dB(A), Weight: 1,064 kg, according to: GS - HO - 07 - new exhibition machine -