Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Fjdjvviytopfx Ac Nepc

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Fpedpfx Acjvvizko Njc Storage location: Garbsen

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Storage location: Nattheim Fpodpfx Acovxk Ane Noc

Condition: excellent (used), Year of construction: 1999, Höcker Polytechnik Clean Air Dust Extractor – Clean Air Unit Inlet nozzle: right Control cabinet Diameter of inlet nozzle: 300 mm Rated air flow: 5,320 m³/h Minimum air flow: 4,433 m³/h Fsdpfx Aoyb T Ucjc Nspc Filter area: 28 m² Filter cleaning: motorized shaking 3 collection bins, total capacity: 495 liters Filter material: polyester needle felt Negative pressure at Vmax: 2,700 Pa Design: mobile Overall length: 3,210 mm Motor power: 7.5 kW Electrical connection: approx. 400 Volt/50 Hz Location: ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2000, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 2407001, total height: 1,735 mm, total width: 550 mm, total length: 1,580 mm, overall weight: 182 kg, filter area: 10.5 m², negative pressure: 240 Pa, nominal flow rate: 460 m³/h, noise level: 75 dB, power: 4 kW (5.44 HP), The unit was designed and installed as a single-station extraction system for a workshop area. It has hardly been used in the past 10 years, as the workshop concept has changed. The system is currently powered and can be inspected. Dismantling and collection must be carried out independently. Upon purchase agreement, the electrical connections will be disconnected from the central control cabinet. All system and installation documentation is available. Fodoyf Az Tspfx Ac Nspc

Condition: used, Year of construction: 2008, 12 motors of 15kW Disassembled into 6 parts: Part 1: 2x Upper part with motors 4000kg Part 2: 2x Intermediate part with filter bags 4000kg Part 3: 2x Lower part with legs 2000kg Fedpfx Acswiwpze Nopc Remainder: Return lines and 1x switch cabinet. Dismantling takes place on Extraction is loaded onto the truck. - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 8011510B - Capacity [m³/h]: 80000 - Number of filter bags [pcs]: 384 - Filter length [mm]: 2500 - Filter diameter [mm]: 230 - Filter surface area [m²]: 72 - Main fan [pcs]: 12 - Main fan power [kW]: 15.0 - Nominal airflow [m/s]: 22 - Extinguishing system: Yes - Disassembled: Yes - Control cabinet present: Yes - Shaking system: Yes - Extraction: Underpressure installation Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 1,100 mm, total length: 1,000 mm, total height: 1,700 mm, Empty weight: 150 kg Price: On request - Documentation available: No - CE certificate present: No - Main motor power [kW]: 11 - Connection diameter [mm]: 410 - Output diameter [mm]: 360 - Transport dimensions: 1000mm x 1100mm x 1700mm (l x w x h) - Transport weight [kg]: 150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Fpjdjybb Dxjpfx Ac Njc

Condition: new, Power 650 Watt tank capacity 5,5 l length 515 mm width 430 mm height 825 mm weight of the machine ca. 36 Kg Professional 650 watt construction dryer Recommended room size 40 - 50 m², height max. 2.6 m Fjdpeqd Rxhjfx Ac Njpc Sound pressure level approx. 52dB Dehumidification capacity 28 L/D - 51 L/D

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 246343, volume flow: 6,500 m³/h, filter area: 3 m², type of input current: three-phase, total length: 2,080 mm, total height: 1,580 mm, total width: 900 mm, nominal power: 2.2 kW (2.99 HP), rotational speed (max.): 1,500 rpm, negative pressure: 650 Pa, control cabinet length: 3,460 mm, control cabinet height: 250 mm, intake manifold diameter: 400 mm, We are offering this new Höcker Polytechnik PaintStar MB 2015 paint mist extraction system, year of manufacture 2021. Manufacturer: Höcker Polytechnik Model: PaintStar MB 2015 Year of manufacture: 2021 Condition: new Fpodpoyfv Sxefx Ac Nsc Category ID: 2068 Type ID: 2305 Machine type: paint mist extraction system If you have any questions or require more information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2023, functionality: fully functional, rotational speed (min.): 870 rpm, volume flow: 23,500 m³/h, type of input current: three-phase, overall weight: 23 kg, inlet: 800 mm, pressing: 180 Pa, input voltage: 380 V, power: 1.1 kW (1.50 HP), bolt circle diameter: 800 mm, input frequency: 50 Hz, NEW! Industrial Axial Fan 800mm dia. 23500m3/h 180pa Ziehl-Abegg FC080-SDS.6K.V7 VT0121 5pcs in stock Brand: Ziehl Abegg Type: FC080-SDS.6K.V7 Fedjyfv Igjpfx Ac Nepc Year of manufacture: 2023 - Flow rate (m³/h): 23,500 - Air pressure 170Pa max The range of applications of this Ziehl-Abegg spiral fan is very wide: air extraction, drying, air recirculation, air supply. 3-phase 2-speed motor 1030W/400W, 870/630rpm 400VAC (±10%) Δ/Y 50Hz, 1.65/1.05A, , IP54 - - Frequency: 50/60 Hz - Power supply: 400 V 50Hz IP54 - Connection type: terminal box - Diameter (impeller or turbine): 800 mm - Degree of protection: IP54 - Air flow direction: impeller towards mounting brackets - Air temperature range: -25°C to +55°C - Speed ​​(RPM): 890/650 - Current (A): 2.7/1.6 - 7-blade impeller made of galvanized sheet steel - Electrical connection via terminal box - Ball bearings - Overload protection protection via thermostat - Airflow direction: impeller towards mounting bracket - ​​Class F - RoHS compliance: Yes - Mounted: on bearings - Dimensions: 850x850x220 mm - Weight: 23kg

Condition: good (used), Year of construction: 2019, Esta Dustomat 62 Dust Extractor The best-selling, certified dust extractors The professional-grade Dustomat 21-67 series meets the highest standards. These units can be used both as mobile units at individual workstations and centrally for simultaneous extraction at multiple locations. Depending on the unit size and the nozzle diameter of the processing machines, extraction can be performed simultaneously at up to six locations. The permanent filter cartridges are cleaned manually, with a motor, or with compressed air, depending on the unit model. Fpsdpfx Ajyftxvsc Nsc • Compact and powerful • Low operating costs • Easy dust disposal • Can be used as a mobile single-station or central extraction system • Suitable for almost all types of dust • Optional certification for special applications Areas of application: - Single and multi-station extraction in industry and trade - Free-flowing dusts - Dry shavings Special features: - Four filter cleaning methods: manual, motorized, pneumatic, and jet cleaning - Cleanable permanent filter cartridges (dust class M) - Post-filter cassettes (dust class H) available as an option Manufacturer: Esta Type: Dustomat 62 Connection voltage: 400 V Connection diameter: 160 mm Drive power: 3 kW Filter area: 9.6 m² Dust collection container: 200 liters Mobile collection container Max. negative pressure: 4,600 Pa Max. air volume flow: 1,850 m³/h Dimensions: 1,830 x 782 x 2,040 mm Year of manufacture: 2019 Weight: 265 kg Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2018, machine/vehicle number: 519553, Central extraction system Höcker Polytechnik with rotary valve and/or dust bins.(Option: rotary valve instead of dust bins) Manufacturer: Höcker Polytechnik Type: Multistar JQ6/5 131/20717A Year of manufacture: 11/2018 Dust properties: Dust and chips Material throughput: Unknown Jet cleaning of filters Volume flow: Approx. 22,000 m³/h Fpsdpfsya Idvox Ac Nsc Disposal type: Open Clean air duct: Air recirculation Residual dust content: 0.1 mg/m³ based on dust. 1 piece Filter system, galvanized - Year of manufacture 11/2018 - Multistar JQ6/5 131/20717A - Filter area: approx. 131m² - Filter bags: 120 - Filter bag diameter: 170mm - Filter bag length: 2,070mm - Filter cleaning Air Jet, compressed air - Filter housing made of galvanized sheet steel - Inspection door, access ladder, standing platform - Tested pressure relief areas - Raw gas section as large expansion chamber - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, hot-dip galvanized. - Includes dry extinguishing line, C connection - *Optionally with 6 chip bins or large rotary valve*2 pieces Clean air fans DER 404/400/18.5-2 - Volume flow: 11,000 m³/h per fan - Directly driven fans - Galvanized sheet steel - Installed horizontally in Multistar series - Electrical power of each fan 18.5 kW - Total volume flow 22,000 m³/h - Total pressure increase: 4,600 Pa 1 piece Pipe components Air recirculation - Including galvanized ducts - Must be supplemented for a new location . 1 piece Control cabinet With PLC Siemens S7-1200 Dustproof sheet steel standard housing control cabinet as wall cabinet, built and completely wired, in accordance with VDE regulations 0100, 0113, and DIN 57113. The scope of delivery includes all components required for control components and the circuit igned for: · Jet cleaning control · Control of 2 fans · 6 automatic start-up of the fans when the machine starts · Pressure monitoring indicator light · 3 control butterfly valves · Rotary valve controlDimensions: - Length: 3,960 mm - Width: 3,380 mm - Height: 5,900 mm (may vary depending on equipment) Electrical connection value: - approx. 38 kW - 400 V/50 Hz - Control voltage 230 V AC/24 V DC Location at warehouse

Condition: used, Year of construction: 2020, Hocker Polytechnik Vacu Mobil 160, Dust Particulate Extractor, Max Volume Flow Rate 1950 m3/h. S/No. 93803 (2020) Country of Origin: Germany This lot is located in Birmingham, UK. A charge of £75 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Fpodpfoyff Iisx Ac Nsc Please visit Cottrill & Co website for more details

Condition: used, Used machine Features and technical data: Mobile extraction unit With filter bag on top Extraction nozzle: 140 mm Fpjdpfx Aoxnffloc Noc Motor: 1.1 kW, 400 V Availability: short notice Location: Flörsheim

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, bag dust filter Bag dust filter tower 4kw 9 bag extractor 3200m3/h Fjdpfsydp Nuex Ac Njpc 9 bag dust filter extractor in excellent condition for sale. radial fan: Filli ferrari 4kw 9 pieces of EMTEX textile dust filter bags, 250mm x 1650mm/pc Outlet diameter: 600mm Inlet diameter: 260mm built-in vibratory shaker. 0.18kw. structure: galvanized steel casing, steel frame. height: 3800mm width: 1150mm

Condition: used, used, good conditionmake Spänextype SP 14high speed approx. 2800 rpmmotor 1.1 kWconnection diameter 140 mmstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Fpedpfxjvwfp Hs Ac Nec

Condition: new, Exhibition machine Type A according to DIN EN 16770:2018 without fire extinguishing device, tested according to the test principles GS-HO-07 of the BGHM. The dust extractor is a mobile suction and filter device for commercial use for installation in the work area. The dust extractor is suitable for collecting, conveying and separating dry wood, paper or plastic chips and dust on various processing machines. Consists of a vacuum-resistant housing with suction nozzle Fsdpfsvwfu Nox Ac Nopc and check valve, antistatic filter elements with jet pulse cleaning, high-performance radial fan on the clean gas side with three-phase motor of energy efficiency class IE3 as well as integrated exhaust air sound insulation and air outlet grille. With 2 swivel and 2 fixed castors, 2 chip containers with filling bags and a circuit with 5 m connection cable and CEE device plug. The circuit is designed for automatic operation. The automatic start-up control for a maximum of 6 machines and the automatic cleaning of the filter with running time addition are included. For the automatic start-up, either the take-off coils or potential-free contacts of the machine can be used. 1K PVC single-layer paint in RAL 9006 (white aluminum). Delivered assembled and ready for use. For cleaning, compressed air prepared on site must be provided to the device (connection via plug nipple NW 7 / 6 bar). Technical data: Suction nozzle: Ø 250 mm Residual dust content:

Condition: used, used, good conditionMake Herringmedium pressure fanfor chips and dustEngine 37kWSpeed 1,475 rpmConnection diameter 700 mmPressure port 680x480mmAir performance approx. 27,000 m³/hat a pressure difference of 2790 Pasteel impellerBelt drive 4 groovesvibration damperNew price approx. 12.00.00Space requirement approx. LxWxH mm1700x2000x2500Storage location 97447 GerolzhofenHandover as is Fpodsvwd U Uopfx Ac Nsc

Condition: used, heavy fire bulkhead with counterweight used manufactured by Spänex width 1300 mm height 1900 mm material transport 2 x D 350 mm located in 97447 Gerolzhofen sale in current condition as seen Fpedpfxsvwgdlo Ac Njc - free on truck -

Condition: used, Year of construction: 2008, without briquetting press Filter area 32 m² Fodpfx Acevxlqmo Njpc with funnel transition to container or connection to rotary valve used, top condition, little used Brand Schuko Type Vacomat 300 Year of manufacture 2008 Clean air device / negative pressure GS dust-tested BIA-tested CE type-tested Motor 7.5 kW Connection diameter 300 mm Pressure pa. 3090 Air output 5800 m³/h Control Filter pressure monitor Extinguishing device powder extinguisher New price approx. 17,000.00 EUR Space requirement approx. 3600 x 1590 x 2550 mm / 4400 without funnel Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 1000x1000 mm- Motor rating 1.5 kW, 3.4 A, 3 Ph, 400V/50 Hz/1410 rpm- Flow rate 4600 m³/h- Usable negative pressure 500 Pa- Filter surface 1.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 4600 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 1-stage switch, +5 m connection cable with power plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1012x1405x915 (1887x1405x1144)- Weight device approx. 175 kgItem No. 195 627 01 Fpsdpfxsv Svcyo Ac Noc

Condition: used, used, good conditionmake Spänextype SP 14for chipshigh speed approx. 2800 rpmmotor 1.1 kWconnection diameter 140 mmstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Fsdpfx Acsvwfm Ee Njpc

Condition: used, with rear wall, lighting, power supply, compressed air supply, hanging system rail, workpiece clamping with height-adjustable support used, Fodpfx Acovwgine Nopc make unknown table size 2400 mm x 800 mm external extraction power sockets 220 V 5 pieces compressed air couplings 3 pieces running rail with hanger 4 workpiece clamping 2 pieces workpiece supports vertical connection diameter 160 mm space requirement approx. 2400 mm x 1000 mm x 2200 mm storage location 97447 Gerolzhofen, free loading, unpacked handed over in the current condition, as inspected, without guarantee and warranty

Condition: used, second hand Make Spanex Type SP 250 Fast running approx. 2800 rpm. Engine 5.5kW Pressure pa. 1500/2000 m³/h Air performance 5000/4050 m³/h Fpjdpfx Acjvwfzpo Njc Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition as seen, without guarantee and guarantee

Condition: used, From the authority Shaft and motor with new bearings Used, good condition Make: Krämer Type: VKA-GR 1 Mach. No. 75/007 Motor: 5.0 kW Connection diameter: 300 mm Pressure per year: 2100 m³/h Fsdpfxjwabiyj Ac Nepc Air flow rate: 6750 m³/h Steel impeller Belt drive Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen without guarantee or warranty