Used die cutter for sale (89)

Condition: used, Heidelberg KSB Cylinder Automatic die cutting machine Iodpfx Ajxz D Daohvetd Max Sheet Format: 40 x 57 cm (approx. 15.75 x 22.44 inches) Min Sheet Format: 12.5 x 15.0 cm Speed: Approx. 5,000 sheets/hour Weight: ~3,500 kg Hot foil device Step motor Schneider PLC Schneider with full documentation 2 zones - two push and pull rollers

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Itsdeyi Dbpopfx Ahvjd Maximum format: 150x180mm Min. format: 24x45mm Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg Itjdpfxoyi Da Se Ahvsd 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: good (used), Busch Model B Label Puncher Professional machine made in Germany. Busch is a leader in the production of pallet turners and pushers. Very good condition, ready for production. The machine is equipped with a quick-action hydraulic unit. Safety guards, die-cutting clamps with micro-adjustment in every plane, and additional rotational adjustment. Quick and convenient die-cutting leveling. Adjustable feed table in every plane. Iodoyi Daxepfx Ahvjtd Long delivery tail. Maximum format 230x230mm Weight 850kg 400V power supply The machine can be used to produce labels, calendars, sample cards, etc.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 116245, GM DC330 Digital die cutting machine/ converter Compact footprint Unwind Web guide Web width 330 In / Outfeed nip for tension control Magnetic die station 200z / 25inch to support die plates of 50mm to 520mm Distortion/ Dispro factor to handle other tooth size plates Re Reg mark reader to support the printed web Die-cut offset possible inline Lateral/ Cross movement possible Waste rewinder Slitting station with manual 7 air pressured V-knives Upper and Lower rewind with options of clock or anti clockwise rotation Label or meter counting Core mandrels/spindles of 25mm, 38mm, 44mm and 76mm x 2 Cold foil Self adhesive lamination Laminator unwind and rewind Silencer to reduce noise when using the lamination Full Flexo station Varnish tray, Picking roller, Anilox roller, Print roller included Itjdpsylpvdsfx Ahvsd GEW UV lamp Min 6 bar air pressure required Machine Weight 1200Kg

Condition: used, Year of manufacture: N/A Condition: excellent Technical specifications: - maximum format -1500 × 1050 mm - maximum speed 14 cycles/min - electromagnetic clutch - self-centering frame for quick clamping of the die - automatic centralized lubrication Device description: ML 1500 is a robust punching and notch press with working area 1500 × 1050 mm, intended for precise punching and creasing operations. The machine construction ensures high stability, long service life and reliable operation even in demanding production environments. Key features: Itsdpfsyk Eg Ajx Ahvod - Standard operating speed of approximately 14 cycles per minute - Powerful motor in the range of 5.5 – 11 kW (depending on configuration) - High machine weight and rigid frame for accurate cutting results - Suitable for continuous industrial operation - Typical applications: The machine is primarily intended for the printing, packaging, and converting industries, including: - Production of cardboard boxes and packaging, - Die cutting of paper, carton, and similar materials, - Creasing and preparation of folding lines, - Both short-run and high-volume production.

Condition: good (used), ML-800 NXL Die-Cutting Machine This machine is used to cut shapes from a mold (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is in perfect condition, manufactured in 2018. First installed in 2020. This is the heaviest die-cutting machine in this format, precise. Format: 830 x 560 mm Weight: 2500 kg Power supply: 380 V Motor: 2.5 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, and manual – Centralized pressure lubrication – Additional safety guards Itedpfxeydkgzj Ahvod – Operating tools and instructions with CE documentation.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Itjdsydkgnjpfx Ahvod Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Year of construction: 2006, condition: ready for operation (used), Specification Detail Die cutting and stripping unit Max. Sheet Size 1050 x 750 mm Min. Sheet Size 450 x 370 mm Itsdpfx Ahjyha N Hsvod Max. Die Cutting Area 1040 x 730 mm Max. Speed 7,500 sheets per hour Max. Pressure 250 tons Stock Range 100 gsm paper to 2000 gsm cardboard; up to 3 mm corrugated board Min. Gripper Margin 4 mm Machine Weight 18,000 kg

Condition: used, Year of construction: 2004, functionality: fully functional, Bograma BSM 750/220/15 Servo punching line, year of manufacture 2004 Isdpjygr I Sofx Ahvjtd Bograma BSM 750/220/15 Servo, year of manufacture 2004 Bograma sheet feeder TA 15, year of manufacture 2004 Bograma shingled delivery SAB 750, year of manufacture 2004

Condition: reconditioned (used), Rabolini model Imperia D, with sheet feeder/remover, 80/120 cm format, self-centering frame, pneumatic clutch, automatic lubrication, copy counter, side register, 3 operating modes, original RABOLINI sheet feeder/remover, refurbished machine. Itodpfoyfv Akox Ahvjd

Condition: reconditioned (used), Hand Fed Platen Titan 3 cm, Size 84.5/123 cm, autocentering frame, pneumatic activation clutch, Picard Plate 5 mm, counter, three operation modes: single, continuous, timed mode. Complete safety features, CE compliant. Machine reviewed. Itsdpfeyfn Tusx Ahvjd

Year of construction: 2020, operating hours: 1,000 h, condition: used, functionality: fully functional, KAMA ProCut 76 Foil – Die-Cutting and Hot Foil Stamping Machine Model Year 2020 | High-End Configuration | Industrial Quality “Made in Germany” For sale is a KAMA ProCut 76 Foil from the 2020 model year. This machine is engineered for demanding die-cutting, embossing, and hot foil applications, making it ideal for carton, packaging, and finishing companies with high quality requirements. Features & Highlights • High-performance die-cutting machine for paper, board, and plastics • Integrated hot foil stamping system for premium finishing • Very high production output with excellent precision • Robust, durable machine design • Servo-controlled feeder and transport table with electronic double-sheet control • High degree of automation and reproducible quality • CE-compliant, Made in Germany Standard Equipment • Motorized platen pressure adjustment (MPC) • 4+1 system with base plate and 1 set of 1-mm counter plates  – 5× medium, 1× hard • 1 standard chase with fine adjustment for steel rule tools (full format) • 3 pile trolleys for feeder and delivery (plus 4 additional pile trolleys) • Servo-driven feeder and transport table • Electronic double-sheet control • 1 set of KAMA fastening elements • 1 set of mounting elements for 15° dies on KAMA carrier plate • Industry 4.0-ready for remote maintenance and network integration Special Equipment & Options • Integrated hot foil stamping  – Mobile frame with integrated heating system  – 4 or 6 heating zones  – Two foil draw motors  – Powered rewind shaft  – Two tool carrier plates Iedpfxoyc Hmuj Ahvetd  – Foil-Saver software for foil optimization • KAMA AutoRegister  – Maximum registration accuracy  – Especially suited for digitally printed sheets • Pneumatic tool clamping (76 only) • Die-cutting force display with overload protection • Universal chase • Chase rack • Vacuum pump and compressor • Servo main drive for asynchronous drive cycle  – Up to 50% higher machine speed  – Alternatively, extended contact time for hot foil stamping Technical Data (excerpt) • Machine type: KAMA ProCut 76 Foil • Model year: 2020 • Maximum sheet size: 760 × 600 mm • Minimum sheet size: 279 × 210 mm • Maximum die-cut size: 743 × 585 mm • Material range:  – Paper from 100 gsm  – Board up to 1,500 gsm (approx. 1.8 mm)  – Plastics such as PET, PP, PVC • Production speed: up to 5,500 sheets/h • Die-cutting force: 165 tons (1.65 MN) • Gripper margin: 10 mm • Machine dimensions (L × W): 4.87 × 2.69 m Applications • Die-cutting of folding cartons and packaging • Hot foil stamping for premium enhancements • Carton, paper, and plastic applications • Post-press finishing of digitally printed sheets with highest register requirements • Short and medium runs with maximum precision Conclusion The KAMA ProCut 76 Foil is a highly flexible, high-performance die-cutting and hot foil stamping machine for professional users. With comprehensive standard and special equipment, state-of-the-art servo technology, and Industry 4.0 readiness, it offers an outstanding overall package for demanding production environments.

Condition: good (used), Punching crucible Simplacutter, 72 x 102 cm, in a good condition, immediately available If you are interested, we will be glad to inform you about other machines in our house. You are welcome to visit the machine in our house after previous appointment. Isdpfx Aeiypwaohvetd

Condition: good (used), machine/vehicle number: 169693, Heidelberg embossing platen TP, machine number T169693 + Heidelberg embossing platen TP, T191298, machine is in good condition, available immediately. Itsdpfx Aovvikfshvod If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machine in our facility by appointment.

Year of construction: 2004, condition: good (used), register die cutter EUROTRON IND-XR 500, year 2004, serial number S1-2004-1, with adjustable X-axis and Y-axis see result photo of test, in a good condition, immediately available Itjdpfx Ajh H Iu Tjhved If you are interested, we will be glad to inform you about other machines in our company. You are welcome to visit the machine in our house by appointment.

Year of construction: 1989, condition: good (used), machine/vehicle number: 11848, Punching platen Gietz MDST, machine number 11848, year of manufacture 1989, in good condition, available immediately Itsdpfxorbhd Ts Ahvod We have two more Gietz models. Please ask for an offer. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to view the machine at our premises by prior appointment.

Condition: excellent (used), functionality: fully functional, For sale: Heidelberg SGB Cylinder 56 × 77 cm with hot foil stamping attachment. Die-cutting is also possible. The machine is in very good technical and visual condition – fully functional, ready for operation, and requires no additional investment. Price: 17,500 EUR / 74,000 PLN – negotiable. The set includes a honeycomb plate for hot stamping and a frame for mounting the cutting die. Viewing on site is possible. Itsdpfx Ahoycfnkjvsd

Year of construction: 2004, operating hours: 37,800 h, condition: like new (used), functionality: fully functional, Top maintained high premium die cutter for fast setup and TOP quality jobs Technical data: Paper up to 70 gsm Cardboard up to 1000 gsm Corrugated board up to 2 mm Max. format: 1060 x 760 mm Min. format: 400 x 350 mm Press force: 260 t Speed up to 9,000 sheets/hour Equipment: Stripping station Optical register control Automatic pile alignment Ultrasonic double sheet control Itjdeyaq S Aepfx Ahvsd Centerline Microplate Plate 4 mm 2 closed frames Non-stop delivery Alignment table Height raised by 220 mm

Year of construction: 1968, condition: ready for operation (used), AUTOPLATEN BOBST SP 1260 E / AUTOMATIC FLATBED DIE-CUTTER STRIPPING / Year Of Production: 1968 / Max. Sheet Size: 1.260 x 920 mm / Min. Sheet Size: 500 x 350 mm / Maximum Speed: 5.000 Sheets Per Hour / Max. Solid Board Thickness: 1,5 mm / Max. Corrugated Board Thickness: 3 mm / Maximum Cutting Pressure: 500 Tons / Weight: 19 Tons / Main Dimensions: 6.075 x 2.840 x 2.200 mm Isdpox R R R Uofx Ahvstd

Condition: new, ML-1400 NXL die cutter The machine is brand new. It is the heaviest die cutter in this format. Format: 1400 × 1000 mm Weight: 6500 kg 380 V power supply Engine: 5.5 kW Working speed 15 +/- 2 cycles / min Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in EU. Itjdpewq Dwzefx Ahvjd Possibility of testing in the showroom in Radom.

Condition: good (used), Heidelberg OHT „windmill” Letterpress Itedpfswxtb Sox Ahved Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market.

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Iedpfswfq T Sox Ahvstd Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Itedpfx Ahjwxtcpevjd Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Itsdpfx Aowxtb Eohvod Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.