Used cylindrical grinding machines 600-1099mm grinding length for sale (197)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding length: 900 mm, TECHNICAL DETAILS Ihjdpfx Ahjytf Tbevow Maximum grinding length: 900 mm Distance between centers: 600 mm Height of centers (standard): 125 mm Height of centers with raised headstock and tailstock blocks: 175 - 250 mm Maximum swing diameter with riser blocks: 350 - 500 mm Table swivel / each side: 10° Table reversal dwell time: 0 - 5 s Diameter / width / bore: 250 x 13 x 76 mm Grinding wheel spindle speeds: 360 rpm Cross movement of grinding wheel head: 285 mm Rapid infeed and retraction of wheel head: 40 mm Intermittent feed per table reversal: 0.001 - 0.03 mm Micro-adjustment of feed, 1 division on dial: 0.001 mm Continuously variable working speeds (normal / special): 20 - 400 / 10 - 400 rpm MACHINE DETAILS Control type: Conventional

Condition: good (used), Year of construction: 2013, operating hours: 27,049 h, functionality: fully functional, machine/vehicle number: 1009-0161, center height: 225 mm, center width: 1,000 mm, grinding wheel diameter: 500 mm, total width: 3,500 mm, total length: 5,000 mm, total height: 2,400 mm, overall weight: 12,000 kg, travel distance X-axis: 350 mm, travel distance Z-axis: 1,150 mm, controller manufacturer: FANUC, controller model: SERIES 31i MODELL A, STUDER S 41 CNC Cylindrical Grinding Machine - Center height above floor at center height 225 mm: 1175 mm - At center height 275 mm: 1225 mm - Max. travel distance Z-axis (longitudinal slide): 1150 mm - Speed range: 0.01 – 20,000 mm/min - Resolution: 0.0001 mm - Acceleration: 2 m/s² - X-axis travel (cross slide): max. 350 mm - Speed range: 0.01 – 20,000 mm/min - Resolution: 0.0001 mm - Acceleration: 2 m/s² - B-axis swivel range: -45° / +225° - Resolution: 0.0005° - Swivel time for 180°: 3 s Ihodpfjyvrzlsx Ahvjw The machine is equipped with a double workpiece spindle head, a magnetic rotary table, an internal grinding device, as well as a large lot of additional magnetic rotary tables, chucks, and an additional dividing head. Attention: The machine can be transported on a standard truck! Attention: The unit must be picked up bindingly at an appointment to be agreed, between 12.05. and 22.05.2026. FCA D-74821 Mosbach – loaded on truck.

Condition: good (used), Year of construction: 2004, operating hours: 35,048 h, functionality: fully functional, machine/vehicle number: 025, center height: 175 mm, center width: 1,000 mm, total width: 2,000 mm, total length: 5,000 mm, total height: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: GE FANUC, controller model: SERIES 21i-TB, STUDER S 33 CNC cylindrical grinding machine Ihsdpfx Aheyvrxqjvew - Longitudinal slide max. travel: 1150 mm - Speed: 0.001 - 10,000 mm/min - Resolution: 0.0001 mm - Cross slide max. travel: 285 mm - Speed: 0.001 - 5,000 mm/min - Resolution: 0.0001 mm - Workpiece spindle head speed range with rotating center: 1 - 1,500 rpm, with fixed center max.: 1,000 rpm - Spindle taper: MK 5 - Run-out accuracy: 0.0004 mm - Including internal grinding device and coolant unit Note: The item must be collected definitively between 12.05. and 22.05.2026 on a date to be agreed upon. FCA D-74821 Mosbach – loaded onto truck

Condition: ready for operation (used), functionality: fully functional, center height: 125 mm, center width: 600 mm, grinding wheel diameter: 400 mm, grinding wheel width: 50 mm, grinding wheel bore: 127 mm, No reserve price - guaranteed sale to the highest bidder! The motor and frequency converter for the workpiece headstock have been replaced! In addition, the control cabinet and wiring diagram have been renewed! TECHNICAL DETAILS Centre height: 125 mm (175 mm with risers) Centre distance: 600 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Grinding wheel bore: 127 mm Swivel adjustment: 270° Workpiece headstock speed: 20 to 400 rpm Spindle taper: 5 MT Tailstock taper: 3 MT Table swivel adjustment: 10° Table speed: up to 6.0 m/min MACHINE DETAILS External grinding wheel motor: 4.0 kW Workpiece spindle motor: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 2,580 x 1,680 x 1,670 mm Machine weight approx.: 2,700 kg EQUIPMENT New control cabinet and new wiring diagram New motor and frequency converter for the workpiece headstock 2-axis digital display Coolant tank Geometry according to Kellenberger protocol Extensive accessories Ihodpfx Ahjyu Rd Iovjw

Condition: like new (used), Year of construction: 2016, operating hours: 31,881 h, grinding length: 3,350 mm, total width: 3,600 mm, total length: 9,400 mm, total height: 2,000 mm, grinding diameter: 595 mm, distance between centers: 3,000 mm, Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Ihjdpfx Aeyudtpshvow Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm): 85 Maximum taper correction (mm): ±0.1 Equipment Tailstock diamond dresser with diamond holder Diamond Grinding wheel guards according to ISO, OSHA, and UNE standard +Two-door enclosure Paper feeder and magnetic separator Grinding wheel balancing shaft MARPOSS electrodynamic balancer Grinding wheel safety sensor Touch-type axial positioner with T25 probe Grinding wheel chuck Driving dog sets Basic machine dimensions / weight Length (mm): 9400 Width (mm): 3600 Height (mm): 2000 Weight (kg): 15000 Air or water through spindle center DXF import function Spindle 2, workpiece unloader Working time hours Under power: 31881 Spindle 1: 8860 Spindle 2: 9774 Rated power kVA: 61 Basic machine dimensions / weight Length mm: 4200 Width mm: 2600 Height mm: 2586 Weight kg: 15000

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Lizzini IG-FL in like-new condition: Ihodsyubc Uepfx Ahvew - Year of manufacture: 2019 - Siemens control - 2 external grinding wheels - 1 internal grinding spindle - C-axis - controlled B-axis Suitable for non-cylindrical (Capto) grinding Distance between centers: 1000 mm Center height: 200 mm

Condition: not inspected (used), Year of construction: 2007, functionality: limited functionality, grinding length: 1,000 mm, grinding diameter: 400 mm, The machine was repaired by the manufacturer after a crash. Table and tailstock have been overhauled. The control system boots up and the machine is capable of grinding. Error: Dimensional accuracy not ensured, the wheel is pulled towards the workpiece during the grinding process. Isdpfoyu T N Tox Ahvshw The machine can serve as a source for spare parts.

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, Distance between centers: 650 mm ID / OD 2-axis SONY digital read out Coolant tank More information upon request. Ijdpjyr Nn Hofx Ahvshw

Condition: reconditioned (used), KELLENBERGER 600 U 175 is a cylindrical grinder of high precision, offering accuracy and reliability. Capacities: centre height 175 mm, between centres 600 mm; wheel Ø350×50 mm, bore 127 mm; wheelhead 270°. Specs: wheel speeds 1500–3600 t/min (4 steps); work spindle 20–400 t/min (stepless); table tilt 10°, up to 6 m/min; supply 3×380 V 50 Hz; wheel motor 4 CV; weight ≈2200 kg; dims 3000×1750×1600 mm. Accessories: digital readout (2 axes), tailstock fine adjust, internal grinding attachment, wheel guard, safety device, sliding door. Suited to tight tolerances in automotive, watchmaking, machine tools, aerospace and medical sectors. Isdpfx Asyr Hihjhvshw

Condition: excellent (used), Year of construction: 2020, operating hours: 9,999 h, functionality: fully functional, machine/vehicle number: 119 118, Schaudt – GSN Schleiftechnik Model: PS4 Isdoxdcx Iopfx Ahvehw Year of manufacture: approx. 1986, completely overhauled/retrofitted in 2020 Control: CNC, Siemens SINUMERIK 840D after retrofit Application: External cylindrical grinding; plunge, oscillation, and face grinding possible

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Used CNC cylindrical grinding machine Make: FORTUNA Type: T23 S1000 ASW 45 CNC Ihodev Eyr Sjpfx Ahvsw Year of manufacture: 1980

Condition: ready for operation (used), total width: 3,500 mm, total length: 6,000 mm, total height: 2,500 mm, controller manufacturer: CNC 6 axes, empty load weight: 6,000 kg, additional equipment features: +, min/max drilling Ø: 6- 120 mm Table movement: 5 -- 500 mm Max grinding depth: 100 mm Swing 280 mm 6 -120 mm grind depth 100 mm angular adjustment 30° Ihodeyru H Ijpfx Ahvew As good as new! EXTERNAL GRINDING: * Max dia of the workpiece: 280 mm Center height: 620 mm Table travel (X-axis): 220 mm Support travel (Y-axis): 380 mm Number of rotations grindingwheel: 0-15 m/min Travelspeed: 0.01 - 10 m/min INTERNAL GRINDING: * Clamp opening grindingspindle: 120-170 mm Max length: 200-250 mm Saddle travel: mm coolant pump: 292 L/1 bar

Condition: ready for operation (used), Cincinnati Grinder Ø 310 x 1250 mm Iedpsyru E Refx Ahvohw Center distance: 1250 mm Max dia of the workpiece: Ø 310 mm

Condition: used, Year of construction: 2016, STUDER - FAVORIT CNC - 2016 - center distance 650 mm - 34700 hours Ihjdpfx Aoyt Syujhvew - used condition as shown on photos - under power, can be tested

Condition: used, Technical details: grinding diameter: 600 mm grinding length: 2600 mm centre height: 180 mm workpiece diameter - max.: 360 mm swing diameter: 600 mm grinding wheel diameter: 600 x 305 x 160 mm Ijdpfxjw Rktbo Ahvohw total power requirement: 17,6 kW coolant device: 90 l/min work piece spindle speed: 12,5-250 U/min feed continuous: 0,05 - 6,0 mm weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm *

Condition: used, Year of construction: 1988, grinding diameter 250 mm grinding length 600 mm max. dia. of grinding wheel 355 mm max. width of grinding wheel 50 mm peripheral speed 2.000 m/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Isdpfx Ahjynnvbovehw Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 2013, grinding diameter 140-355 mm grinding length 3000 mm centre height 260 mm weight of the machine ca. 8,3 t dimensions of the machine ca. 8500 x 3500 mm SA 6Ux3000 external cylindrical grinding machine Year of manufacture: 1981 Retrofit: 1 x 2013 SERWEMA Maximum grinding diameter with tailstock: 140 mm Maximum grinding diameter without tailstock: 355 mm Maximum grinding length: 3,000 mm Center height 260 mm Workpiece weight max. 500 kg Ihodpfxsynmpyo Ahvsw Machine footprint 8500 x 3500 mm Machine weight 8500 kg

Condition: good (used), Year of construction: 2014, center height: 180 mm, center width: 600 mm, grinding diameter: 260 mm, Sinumerik 840D sl cnc control Ijdpfxevygwws Ahvjhw tail stock measuring device diamant roll portal loading device Technische Daten / technical details: Spitzenweite / center to center 600 mm Spitzenhöhe / center height 180 mm max. Schleifdurchmesser / max. grinding diameter 260 mm Schleifscheibenmaß / grinding wheel dimension 600x80x304,8 mm Reitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 12 kW Gewicht der Maschine / weight 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2000, centre distance 1000 mm grinding length 1000 mm centre height 300 mm Control Siemens 840 800 kg weight of the machine ca. 6,7 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Ihjdpfsynbi Iex Ahvow Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 1983, Model: Fortuna F23 S1000 ASW 45 Manufacturer: Fortuna-Werke Maschinenfabrik GmbH Origin: Stuttgart-Bad Cannstatt, Germany Year of Manufacture: 1983 Machine Type: Universal external cylindrical grinding machine Control Type: Not CNC – semi-automatic with digital position indicators Workholding: Grinding between centers with headstock and tailstock Max. Grinding Length: 1000 mm Main Motor Power: 26 kW Voltage: 380 V Frequency: 50 Hz Connected Load: 50 A Machine Weight: Approx. 4900 kg Grinding Wheel & Spindle: Wheel Diameter Options: 400 mm, 450 mm, 500 mm, 600 mm, 750 mm, 900 mm Wheel Bore Diameter: 127 mm / 203 mm / 305 mm Spindle Speeds (depending on wheel size): From 930 rpm to 1870 rpm Surface Speed Compatibility: 35 m/s and 45 m/s Spindle Design: Combined axial-radial bearing system for high rigidity Oscillating Grinding Support: Yes – for improved surface finish and cooling Grinding Functions: External cylindrical grinding only (not centerless) Longitudinal feed (table movement) Plunge feed (cross movement) Oscillation grinding (with adjustable stroke) Digital input system (non-CNC but programmable logic based) Manual fine adjustment via micrometer and scale plate Notes: Machine is designed for roughing and finishing of steel, cast iron, and aluminum Built-in charts and formulas provided in the manual for infeed rates, stock removal, overspark passes, and optimal feed per material Extremely rigid German construction, ideal for toolrooms or production environments seeking repeatable precision without CNC control Equipped with electronic displays and control panel (not G-code programmable) Ijdpfx Aew Avhpjhvohw Power panel and internal logic controlled through Fortuna's relay/PLC interface

Condition: like new (used), Year of construction: 2010, Machine Type: CNC Cylindrical Grinding Machine Manufacturer: Fritz Studer AG Model: S22 Year of Manufacture: 2010 Control System: FANUC 31i-A CNC Machine Base: Granitan® S103 mineral casting Configuration: Fixed straight wheelhead for external (OD) grinding Automation: Automatic loading system with FANUC robot integration Distance Between Centers: 650 mm (25.6”) Center Height: 175 mm (6.9”) Max. Workpiece Weight: 150 kg (330 lbs) Max. Workpiece Length: 700 mm Max. Workpiece Diameter: 449 mm Grinding Wheel Diameter: 610 mm Grinding Wheel Width: 160 mm Ihsdpswl Uvkjfx Ahvew Grinding Wheel Speed: Up to 3,200 rpm Spindle Power: 15 kW (20.5 hp) Wheelhead Type: Fixed straight X-Axis Travel: 310 mm Z-Axis Travel: 850 mm X-Axis Max. Speed: 15,000 mm/min Z-Axis Max. Speed: 30,000 mm/min C-Axis: Full rotation capability for workhead Programming Interface: StuderWIN with FANUC 31i-A Additional Software: StuderGRIND Automation Interfaces: Standard interfaces for loaders and peripherals Other Equipment: Rotary dresser, Heidenhain scales, various clamping fixtures

Condition: refurbished (used), Year of construction: 2020, Machine Type: Cylindrical Grinding Machine Manufacturer: Schaudt Maschinenbau GmbH Model: PS 4 Year of Original Manufacture: 1986 Renovation/Retrofit: 2020 Control System (Post-Retrofit): Siemens CNC SINUMERIK 840D General Specifications Application: External cylindrical grinding Grinding Method: Plunge, traverse, face grinding Control Type: CNC (Siemens retrofit in 2020) Machine Weight: Approx. 3,500 – 4,500 kg Installation Area: Approx. 3.5 m x 2.0 m Workpiece Capacity Center Height: 180 mm Distance Between Centers: 1000 mm (varies by version) Max Workpiece Diameter: 360 mm Max Workpiece Weight: ~150 kg between centers Grinding Spindle Grinding Wheel Diameter: 400 mm Grinding Wheel Width: 50 mm Bore: 127 mm Peripheral Speed: Up to 45 m/s Spindle Drive Power: ~7.5 kW Spindle Speed Range: Up to 1,500 – 2,500 rpm (depending on wheel size) Headstock Type: Fixed or rotating spindle Speed Range (if motorized): ~30 – 500 rpm Taper: MK4 or similar Ijdpsw Avrzofx Ahvehw Drive: AC Servo (post-retrofit) Tailstock Type: Manual or hydraulically actuated Quill Stroke: Approx. 50 mm Quill Diameter: ~75 mm Axes X-Axis (infeed): CNC-controlled Z-Axis (longitudinal): CNC-controlled Resolution: 0.001 mm Drive Type: Digital servo motors with ball screw Position Feedback: Absolute/Incremental linear encoders Coolant System Coolant Tank Capacity: Approx. 150 – 250 liters Coolant Pump: High-pressure, with filtration system Other Features (Post-Retrofit) Siemens HMI with touch interface Electronic handwheels (MPG) Updated safety system and enclosure New electrical cabinet with ventilation and cooling Optional AE sensor for gap detection or touch dressing

Condition: used, Year of construction: 2000, Lot consists of: (1) CNC angle approach cylindrical grinder Ihjdpfxsym Tcwo Ahvow Technical Details: diameter 250 x 800mm, VM24 grinding wheel balancing system, MARPOSS InProcess measuring unit, CNC SIEMENS SINUMERIK 840D

Condition: used, Year of construction: 2006, grinding diameter 250 mm grinding length 1000 mm Control Kavalir K 51 peripheral speed 25 - 45 m/sec max. workpiece weight between centres 80 kg voltage 400V AC 50 Hz control voltage 24V AC/DC current -Sicherung für Zuleitung 35 A weight of the machine ca. 3,8 t The machine is untested and is being sold for spare parts only! Ihodpfsx I Sigjx Ahvew Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, The STUDER S242 is a versatile hard-fine machining center for grinding, turning, and milling operations on medium-sized workpieces. It is ideal for complete machining in a single setup – from external and internal grinding to hard turning and drilling/milling with driven tools. With the Studer S242, workpieces in the rotational sector can be finished to very high precision. Thanks to integrated automation, this machine is suitable for both single-part and series production. The S242 is also equipped with a VDI turret featuring driven tools. Center distance: 800 mm Swing diameter: 180 mm Max. workpiece weight: 60 kg X-axis: travel 220 mm, resolution 0.00001 mm Z-axis: travel 1,600 mm, resolution 0.00001 mm Grinding spindle: 6.8 kW, grinding wheel Ø 400 x 50 mm, automatic balancing Workpiece spindle head: AC synchronous spindle motor 10.5 kW, up to 7,500 rpm Tailstock variants: quill tailstock with integrated position measuring system Machine bed: Mineral cast Granitan® S103 for excellent damping and thermal stability Software & Control: Fanuc 31i-A control with 15" touchscreen Dialog language: German for StuderWIN Integrated measuring control with Renishaw LP2 touch probe, switchable to the turret Special features & advantages: Ihjdpjw Hqm Iofx Ahvjw Complete machining in a single setup → reduced main and secondary times High dimensional accuracy and surface quality due to Granitan® machine bed Short changeover times, suitable for everything from single-part to large-series production Flexible clamping system and modular tool configuration High process reliability thanks to integrated measuring and sensor systems Dimensions & Weight: Total weight: 12,000 kg Connected load: 45 kVA Compressed air requirement: min. 5.5 bar