Used miter saws / chop saws for sale (126)

Condition: excellent (used), Very well-maintained Cursal 6000/250 mm cross-cut saw operates either with marking chalk as a defect cross-cut saw or as an optimizing cross-cut saw without length limitation. Bdedpeynlnzefx Adrjd

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, For sale: Industrial, fully automated cross-cut saw for trimming packages of lumber and structural components — a complete processing line for formatting bundles to a specified length. The machine is designed for use in sawmills and timber structure manufacturing plants, where process efficiency, precise length repeatability, and bundle stabilization during cutting are critical. The machine is available immediately — inspection and testing possible. Working parameters: Bodpexn Rt Usfx Adrodd • Max. bundle size: 1300 × 1300 mm (width / height) • Max. input bundle length: 6000 mm • Max. cutting length: 3000 mm • Min. cutting length: 600 mm • Max. bundle weight: 8000 kg • Cutting accuracy: ±2 mm The minimum bundle cross-section is determined by the extreme positions of the hydraulic clamps — cutting of smaller bundles is permissible. Cutting module: • Main motor: 11 kW • HIWIN heavy-duty linear guides • GB TITANIUM guide bar + STIHL chain • Automatic lubrication system for the guide bar The robust construction of the cutting unit ensures operational stability and precise cutting length repeatability. Bundle stabilization: • 6-point hydraulic clamping system (top + side + before and after the cutting line) • Bundle alignment to vertical rollers • Elimination of bundle movement as the saw enters Process automation: • Intelligent bundle strapping system • Automatic determination of strapping points • Possibility of automatic base cutting • Discharge buffer for cut bundles Conveying and handling: • Cross infeed conveyor • Cross outfeed conveyor • Automatic discharge of bundles after cutting Waste removal: • Belt waste conveyor (~10 m) • Hydraulic tilt rollers in the cutting module (prevents jamming of large waste pieces) Automation: • Siemens PLC controller • Yaskawa servodrive and inverters • 21–22” operator panel • Remote service and diagnostics Additionally: • Winter package — control system heating • Delivery to customer — included • Installation — included • Commissioning — included • Operator training — included The machine is available immediately.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: C17037, saw blade diameter: 500 mm, cutting width (max.): 200 mm, CNC CUTTING CENTER WITH TILTING BLADE CAMAM MOD. TAC CNX – CE RULES - 1350mm x 200mm x 80mm capacity - Cutting thickness from 10mm to 80mm Bdjdpfxsywdzgo Adrjd - Cutting width from 10mm to 200mm - CNC controlled advancement speed - up to 60m/min - CNC controlled - +/- 60 degree rotation - 4kW saw motor with adjustable RPM - Saw blade diameter 500mm - Completely enclosed interlock saw cabin - Outfeed conveyor belt - Automatic bar feeder and magazine - Infeed length with loader max 3.000 mm - S/N C17037 - Year 2017

Condition: used, Year of construction: 1992, saw blade diameter: 550 mm, overall weight: 1,500 kg, power: 13 kW (17.68 HP), No. 3260 CNC cross-cut system Paul 14KE Used, year of construction 1992 (overhauled by the manufacturer in 2012) According to our customer / the previous owner, the machine is fully functional and can be viewed and tested on site Saw blade diameter 550 mm Speed 3500 rpm Bore 120 mm Connected load 13 kW Workpiece length 600 - 7000 mm Workpiece width maximum 380 mm Workpiece thickness maximum 100 mm Wood cross-section minimum 12 x 40 mm Wood cross-section maximum 45 x 380 / 100 x 200 mm 6 driven bottom rollers 6 non-driven top rollers CNC control MAXI x.3 Complete with infeed, outfeed conveyor, switch cabinet and control Technical documentation available Weight approx. 1500 kg Sale on behalf of customer, ex location near 99091 Erfurt, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Bdedpjyl R Uusfx Adrjd Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: new, cutting width max 610 mm Cutting height max 200 mm Bodeyi Hthepfx Adrodd Saw blade diameter 650 mm Motor output 11 kW

Condition: excellent (used), functionality: fully functional, saw blade diameter: 700 mm, saw drive: 7,500 W, operating pressure: 6 bar, disc diameter: 700 mm, Large size carpenter industrial cutting circular saw. Powerful engine: 7,5Kw. 380V. Forward and backward movement is pneumatic. Bedpfjv Ic Iujx Adrodd Height adjustment is electric. La diameter: 700mm.

Condition: excellent (used), IM Very good condition. Bodpsxcll Ujfx Adrjdd

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Bdjdpfx Aoxvh E Rsdrsd Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, functionality: fully functional, – robust construction TECHNICAL SPECIFICATIONS: Bodpfx Asw Nau Sedrsdd – max. cutting width: 3050 mm – min. cutting width: 450 mm – max. cutting height: 125 mm – saw blade diameter – three cutting units – each cutting unit adjustable independently: 500 mm – motor power: 3 x 4 kW – feed motor power: 1.5 kW – two feed speeds – material hold-down – loading magazine for boards – transport dimensions (L/W/H): 620 / 200 / 120 cm – weight: ~ 800 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, maximum cutting height 160 mm maximum cutting width 610 mm disc diameter 600 mm minimum disc diameter 590 mm disc rotational speed 2800 rpm Bjdjymnvlepfx Adrodd motor power 7.5 kW 2 stops year of manufacture 2001 weight approx. 700 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: MLS 250 P TR, saw blade diameter: 200 mm, overall weight: 4,200 kg, cutting length (max.): 2,500 mm, Multi-blade saw for wood cutting by Mario Zaffaroni & Figli S.r.l. Details: 1) Element length: min. 330 mm, max. 2500 mm 2) Element thickness: min. 2 mm, max. 100 mm Bdedpfx Adsyk U Ebsred 3) Feed (working) speed: 3–45 m/min 4) Maximum cutting (milling) depth: 20 mm for saw blades with 200 mm diameter 5) Total power: 55 kW 6) Main motor power: 45 kW 7) Weight: 4200 kg The machine is fully functional, requires no servicing. Very good condition.

Condition: good (used), Optimizer Paul 11 11MKL KE11 14E MAXI 4.0 All parts available. Prices are set individually. Bdodpfx Adoyi T Rajrjd

Condition: as good as new (ex-display), Year of construction: 2025, Semi-automatic under-table crosscut saw, including: - 2 meter roller conveyor to the left of the saw with 1 manual folding stop and Bdodpfjw Rcibjx Adrsd 1 pneumatic folding stop - 2 meter roller conveyor to the right of the saw General Technical Data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm (Z = 108) Rotational speed: 2,800 rpm Compressed air: max. 8 bar Extraction connectors: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Standard equipment: Automatic protection and pressure device Two-hand operation and safety shield Carbide-tipped saw blade SAFE The ergonomically positioned two-hand control and safety guard around the saw blade ensure absolutely safe operation. Safe, protected, and reliable! ROBUST Legend saws are designed and built to work with challenging materials and hard wood even under tough conditions. The frame is made of thick-walled, fully reinforced and coated steel. Robust, compact, and durable. FAST Compared to a pull or radial arm saw, the LEGEND pneumatically guides the saw blade through the workpiece at extremely high speed. This significantly reduces the physical burden on the operator.

Condition: excellent (used), HOLTEC HFT 21 packet cutting saw with automatic feed – year of production 1986 – German production – electric roll feed Technical parameters: - engine power 11 kW - guide length 1700 mm - package width 1300 mm - package height 1300 mm - cutting length max 4500 mm - roll width 1300 mm - spacing between rolls 900 mm - roller diameter 160 mm - height of the rollers from the base 730 mm - total length 9400 mm Bjdpfx Adsiwfm Ueredd Transport dimensions 650 x 200 x 256 cm weight 2000 kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 014105, saw blade diameter: 250 mm, overall weight: 250 kg, rotational speed (max.): 5,000 rpm, inner diameter: 30 mm, No minimum price – guaranteed sale to the highest bidder! Loading can take place on 08/09/2025 or 09/09/2025! TECHNICAL DETAILS Bdodow Hrzmjpfx Adrjd Rated speed: 5,000 rpm Saw blade diameter: 250 mm Fence: up to 6,300 mm Max. cutting depth: 90 mm Inner diameter: 30 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,400 x 900 x 1,600 mm Weight: 250 kg EQUIPMENT With roller conveyor assembly kit Note: The saw does not have a continuous roller conveyor; the last roller supports the profile at the end of the fence.

Condition: new, Year of construction: 2026, functionality: fully functional, Cutting fixed lengths according to cut lists and cutting out defective sections Cutting cycle: Defect trimming via chalk marking Cutting to fixed lengths, standard and sequential cutting, sequential cutting in marking mode. Infeed material: variable lengths with single piece loading WS.1 Through-feed crosscut saw 4 pcs. lower feed rollers 1 pc. loading table, 2 meters, right side, with dual marking table 1 pc. outfeed table, 1 meter, with rear stop Roller height adjustable manually 12 pcs. luminescent chalk sticks Cutting capacity: Position A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Position B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control system with: 7" color touchscreen Editing of cutting cycles directly on the machine Programming options: - Defect trimming via marking - Operation with cut list consisting of 10 dimensions; repeat option for each dimension; total number of pieces for each dimension 100 storage slots for cut lists Detection system for the last two pieces to be cut and the following piece Electronic control of sorting unit with No.1 ejection kicker (ejection kicker optional) Technical specifications: Feed system adjustable by motor, brushless and with toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm TCT blade diameter 500 mm Motor power 7.5 kW Cutting cycles per minute up to No. 100 Minimum workpiece length 550 mm Minimum workpiece width 40 mm Minimum workpiece thickness 15 mm On request: ZA295 Additional loading table with dual marking table ZA110 Outfeed table Bjdpfx Adjx Da Tvorodd ZA058 TCT saw blade Ø 500 mm ZA296 Motorized adjustment of roller height

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Bdsdpfxsdy Hrde Adrod Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: used, Year of construction: 1999, Steel frame, cast iron arms and slides Mounting on 4 profiled rollers on ø25mm slides Blade ø350mm AL30 Bedpfx Adoppmtuorsdd Cutting height 110mm Cutting capacity 680mm Engine power 3kw 3000 rpm extra-flat motor Voltage 380V Engine tilt to the left from 0° to 75° Crank up and down on the front of the machine Suction outlet diameter 120mm 180cm/170cm/H160cm +- 420kg

Condition: used, Forma chop saw IDC000125 - manufacturer: Forma - infeed table - outfeed table - width: 350 mm - height 150 mm Bdodsvzw Agspfx Adrjd - complete with saw dust suction system

Condition: used, Stromab TR350 chop saw IDC000098 - complete with filter - with roller conveyors Bedpfx Adju Dhziorjdd

Condition: used, Maggi Best 960 IDC000099 Bjdpju Dh Hlsfx Adrsdd

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 035-110235, saw blade diameter: 650 mm, cutting height (max.): 245 mm, rotational speed (max.): 2,800 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 650 mm Maximum cutting height: 245 mm Bodpfx Adjxpvtiorodd Speed: 2,800 rpm Bore diameter: 30 mm Riving knife thickness: 5.4 mm Kerf width: 13 mm Saw blade height at 90 degrees: 245 mm Saw blade height at 45 degrees: 164 mm Saw blade height at 30 degrees: 113 mm Type of input power: Three-phase MACHINE DETAILS Motor power: 10 kW Motor speed: 3,000 rpm Electric saw blade tilt: 90° - 30°, with digital display Rotary table range: 30° - 150° Electrical Data Phases: 3 + N + PE Voltage: 400 V Frequency: 50 Hz Current consumption: 17 A EQUIPMENT Automatic guarding hood Pneumatic cross feed Laser for length cutting

Year of construction: 2020, condition: excellent (used), Saw lifted up - down Shaft diameter 25mm (30mm adapter included) 4kW engine Weight 204 kg Bdjdpohlhhbjfx Adred Year of prod. 2020

Condition: excellent (used), Year of construction: 2017, saw blade diameter: 600 mm, cutting height (max.): 200 mm, cutting width (max.): 800 mm, input voltage: 400 V, Technical specifications: - Maximum saw blade diameter: 600 mm - Saw blade holder: 35 mm Bjdpfx Ajw Aqndsdredd - Cutting time per stroke: 4 sec. - Motor power: 7.5 kW - Saw shaft speed: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Required air flow: 1000 m³ / h - Voltage: 400 V / 50 Hz three-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Pneumatic feed for saw blade - Two-hand safety PLC control - Automatic motor brake - Set of operating spanners - Emergency stop button - Speed regulator for saw blade feed - Fixed vertical safety guard - Upper pneumatic safety pressure device (pneumatic safety cover) - Extraction speed at least 28 m / sec.

Condition: new, Year of construction: 2026, I am selling a KUSING SPS-500 bottom crosscut saw. This is a fully electric, robust crosscut saw without the need to use compressed air to operate the machine. The machine offers an ideal solution for sawmills, primary processing of lumber, but also for any production that works with long prisms and needs to be precisely shortened to size, such as in the production of windows and doors. Thanks to the convenient, smooth stroke speed regulation, it is possible to simultaneously cut board material and prisms to size even with a weaker motor. Technical parameters: Motor power: 3 / 4 / 5.5 / 7.5kW Disc diameter: 500mm Cutting speed: 2 - 6s. Maximum cutting height: 150mm Maximum cutting width: 350mm Bjdpjx Ut H Tefx Adrodd Individual cutting parameters can be customized. The price includes basic tables 2 + 2 m There is also a wide range of extension table configurations to choose from, whether it is digital stops, controlled stops, etc.