Mitre saw

WINTER ASKS-6060

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab The machine also has: - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Mass clamping device for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) Bodpjuiy Hrsfx Amrjwu - Delivery and installation on your premises - Training of your employees

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Bwodpfx Asuiy Ngjmreu Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: used, Year of construction: 2006, total width: 4,600 mm, total height: 1,830 mm, Dimensions (LxBxH): 217 x 460 x 183 cm - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107402 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Spindle diameter [mm]: 40 - └ Spindle 3: - - Spindle diameter [mm]: 40 - └ Spindle 4: Bedpfx Amswnig Nsrewu - - Spindle diameter [mm]: 40 - Feed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 2170mm x 4600mm x 1830mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), spindle bore: 360 mm, travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, spindle motor power: 45,000 W, rotational speed (max.): 500 rpm, total height: 2,100 mm, total length: 8,100 mm, total width: 2,750 mm, overall weight: 13,000 kg, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Max. turning Ø:665mm X-Axis: 798mm Z-Axis: 358mm Spindle bore: 360mm Speedrange: 500Rpm Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Bsdpfx Amswxb Ererowu Width: 275mm Height: 2100mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Bwodpfswgbuijx Amrsu Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. - Coolant system.

Condition: new, spindle passage 230 mm turning diameter over bed 970 mm turning diameter over slide rest 720 mm Control Fanuc OiTD turning length 2200 mm total power requirement 37 kW Year of manufacture 2013 Control: Fanuc OiTD Other controls possible Turning length (mm) 2200 Max. turning diameter (mm) 970 Max. turning diameter over slide (mm) 720 Spindle diameter (mm) 230 Diameter range (mm) 850 Speed: 500 kW 37 Voltage: 400V Hz 50 Including: 4-jaw chuck, Ø 800 mm rear Pneumatic 3-jaw chuck, Ø 600 mm front The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Bedpfxsyqupao Amrjwu About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER HDE 300 lathe with a motor output of 3 HP. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Center height 300 mm - Center width 1,000 mm (extendable*) - Electronic speed control (100-450 / 300-1,100 / 750-2,700 rpm) - Hollow spindle D = 20 mm with inner cone MK3 - Quill travel 150 mm - Motor 3 HP / 400 V - Weight 276 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Bwsdpfx Amjtpnu Rorsu If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, woodturning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117

Condition: new, - NEW -Description:- Robust welded steel construction- Workpiece is automatically fixed with each cut by saw blade cover- The saw blade is moved upwards via a pneumatic cylinder and dips back into the machine body after each cut- Saw blade feed infinitely variable via adjusting screw on the front of the machine- Effective chip and intrusion protection made of Plexiglas- High operating safety due to two-hand control- Standard with 1m roller conveyor to the left and right of the machine, and material stop with scale- Saw blade change via large side doorTechnical data:General informationSaw blade speed(s) 3000min¯¹Saw blade diameter 500mmSaw blade bore 30mmSaw blade thickness 4mmMitre angle noSuction nozzle diameter 125mmSound pressure level89dB(A)Dimensions and weightsLength (product) approx. 3000mmWidth/depth (product) approx. 1600mmHeight (product) approx. 1500mmWeight (net) approx. 700kgElectrical dataPower drive motor 6kWMotor speed 2900min¯¹Total power consumption 15.5ASupply voltage 400VMains frequency 50 - 60HzStandards and approvalsEMC class APneumatic connectionAir consumption approx. 33l/minPneumatic working pressure 6 - 8barCutting areasCutting capacity 0° (square) solid material 160 x 160mmCutting capacity 0° (rectangular) solid material 400 x 100mmScope of delivery:- 1 m infeed roller conveyor, to the right of the machine- 1 m outfeed roller conveyor including manual material stop with scale, to the left of the .: 5651500 Bwodpevwflujfx Amreu