Used cutting machines for sale (342)

Condition: excellent (used), Year of construction: 2017, Ref:11049 . 2017 Ideal 5221-95 EP Guillotine. 52cm programable guillotine Equipped with: Electro-mechanical blade and clamp drive Power ‘EP’ back gauge Control module Electronic hand wheel for manual back gauge positioning Infinitely variable speed control (from very slow to very fast) Optical cutting line Adjustable back gauge with narrow separations and plastic gliders Two side lays each on front and rear tables High-quality blade made from “Solingen steel” Solid steel blade carrier and adjustable blade guides Automatic clamping system, guided on both sides for evenly distributed clamping pressure Clamp can be lowered or raised independently from blade Machine and stand can be separated for transportation through narrow doors (70 cm) Side tables (left and right) SCS (Safety Cutting System): hinged, electronically controlled safety guard on the front table Transparent safety cover on the rear table Main switch and safety lock with key Electronically controlled true two-hand operation 24V controls (low voltage) Disk brake for instant blade stop Blade changing device with covered cutting edge Blade depth adjustment from the outside of the machine Easy blade change from the front of the machine without removing covers. Digital display for measurement readout in cm or inches (display accurate to 1/10 mm or 1/100 inch) 10-button keypad for presetting of measurement Memory key for repeat cuts | 9 programs with 9 steps in each program (up to 9 repeat cuts can be integrated into a program as one single program step) Setting of program steps via “Start” button ‘SET’ function key for reference measurement Programmable eject function – for pushing out the paper Two programmable keys for quick setting of frequently needed measurements Self-diagnosis system with error indication on display Specification: Cutting length: 520 mm Hjdpfjx Nfr Djx Adaoh Cutting height: 80 mm Narrow cut: 35 mm Table depth: 520 mm Power supply: 230 V / 50 Hz

Condition: excellent (used), Year of construction: 2009, Ref:11043 . 2009 Horizon HT-30 Trimmer Excellent condition - Only 2.2m cuts! For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Comprising; HT-30 Trimmer with stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Including A & B top plates, spare knives & tools. Specification: Book Size, Max: 300 x 300 mm Min: 100 x 142 mm Pile capacity : 2 -- 51 mm Hodpfjx Nfnljx Adaeh Mechanical speed, Max: 200 cycles/hr. Production example, 1,000 books/hr. with 5 x 10 mm books in pile. Voltage frequency: 3-Ph, 200/220/400V, 50/60Hz.

Condition: used, Year of construction: 2011, Case maker Kolbus DA 260 Year: 2011 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic case counter - Board magazin for manual loading - Board cutter: PS - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery Hjdpfxowdgfzs Adajh - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 104 mm Max. mechanical speed: Up to 40 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), For sale is a rotary table type 800E suitable for a Netstal SynErgy 2000 injection molding machine. Technical data: Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 400 mm Table design: NC rotary tilting table Rotary/tilt axes: B-axis approx. -10° / +95° C-axis (rotation): 360° Max. workpiece weight: approx. 200 kg Table size: Ø 500 x 380 mm Main spindle: SK 40 (ISO 40) Max. speed: approx. 10,000 rpm Max. tool length: approx. 280 mm Max. tool weight: approx. 6 kg Transport dimensions: 2.45 x 1.76 x 2.38 m Machine data: Machine weight approx. 3,500 kg Total power requirement: approx. 17 kW Transport and loading can be organized throughout Europe on request and for an additional charge. Prices exclude VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Hjdpfoxvz A Nox Adajh Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Three knife trimmer automatic with integrated pre stacker Built in 2008 - Color monitor with touchscreen - Infeed conveyor - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Mechanical speed 1,000 to 7,200 cycles/hr Sizes untrimmed Standar Size Maximum 384 x 320mm (15 1/16" x 12 5/8") (Spine length x booI' width) Minimum 140 x 72mm (5 1/2" x 2 13/16") Large size Maximum 445 x 320mm (17 1/2" x 12 5/8") Small size Minimum 110 x 72mm (4 5/16" x 2 13/16") Sizes trimmed Standard Size Maximum 304 x 303mm (12" x 11 7/8") (Spine length x book width) Minimum 136 x 70mm (5 5/16" x 2 3/4") Large size Maximum 434 x 303mm (17 1/16" x 11 7/8") Small size Minimum 100 x 70mm (3 7/8" x 2 3/4") Book thickness Maximum 80mm (3 1/8") Minimum 2mm (1/16") Ttim Front Maximum 40mm (1 5/8") Minimum 2mm (1/16") Head/Food Maximum 40mm (1 5/8") Hsdpjvdqt Rofx Adajh Minimum 2mm ('/.") Power consumption 20 kVA Compzossed air connection 40 Nm*/h at 6 bar Exhaust 2100 Nm'/h at v = 25 mls Wei ht 5500 (12 125 bs )

Condition: good (used), Year of construction: 2000, Maschinen Nr. 534 Built in 2000 Maximum Mechanical Speed: Up to 110 cycles/min Max. Individual Product Output: 13,000 products/hour Trimmed Format (Min. W x H x T): 100 x 120 x 2 mm Trimmed Format (Max. W x H x T): 300 x 388 x 80 mm Untrimmed Format (Max.): 310 x 400 x 80 mm Max. Pile Height (Infeed): 80 mm Max. Pressing Force: 20 KN (infinitely variable) Hsdpfexyff Njx Adash Max. Front Trim Off-cut: 40 mm Max. Head/Foot Trim Off-cut: 50 mm Machine Length (Approx.): 2,410 mm Machine Width (Approx.): 2,260 mm Machine Height (Approx.): 1,740 mm Approximate Weight: 5,700 kg Control System: Kolbus Co-Pilot (Common) Air Consumption: 50 Nm^3/h or 30 m^3/h at 6 bar Exhaust Capacity (Trimmings): 4,000 m^3/h, 2,000 Pa Electrical Connection: 230/400 V, 3 phase, 50 Hz

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year 2007 - Co-Pilot with touchscreen Hedpfx Adou Tuiisash - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): 4 - 18 - Knife pre-setting device - Sets of knives: 2 Condition: cleaned in good working condition

Condition: good (used), Year of construction: 2003, functionality: unexamined, Built in 2003 Size trimmed max 300 x 420 x 80 mm min 100 x 100 x 2 mm Size max 305 x 430 mm Hsdpsvtqbajfx Adaoh Pile height 80mm Press capacity max 20 kN Speed max 3,900 c/h Air pressure 6 bar Compressed air 40 Nm³/h - 6 bar Electric supply 400/50 V/Hz/A Length 3,300 mm Width 3,060 mm Height 1,740 mm Weight 5,170 kg (approx.) Equipment • co-pilot • right hand infeed • feeders • control with touchscreen • equipment for changing the format

Condition: excellent (used), Year of construction: 2003, Technical data: Cutting width: 115 cm Electronic control Hydraulic clamp Safety light barriers Solid and stable construction Complete set of tools and documentation Hodpfjxtwyfsx Adaeh

Condition: good (used), Cutting machine EBA 551-06, Item no. L1121 Hsdpfx Ajx Rclkedajh

Condition: used, Year of construction: 1992, Monitor, Program Hedpfx Adex H Slfsash Airtable, Table left, Table right Available: at short term

Condition: good (used), Grafcut G73H Hydraulic Paper Cutting Guillotine Machine in very good condition. The machine was operated in a digital printing house, with low mileage. Description: • LCD touchscreen programmer (100 programs, each with 100 steps) • Hydraulic knife and pressure drive • PLC-controlled feed • Illuminated cutting line • Stainless steel-covered tables • Additional manual knob for moving the feed beam • Mechanical foot pedal for pressure adjustment Hsdpfox Hqnlox Adajh • Pressure force adjustment • Side tables • Photocells protecting the work area • Safety features: knife stop control at top dead center, two-handed operation, rear table guard • Air table • Quiet operation The machine is equipped with all safety devices and guards, and meets CE standards.

Condition: good (used), Polar Mohr 92 ED Paper Cutting Guillotine Machine in very good condition. Reviewed and ready to use. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 920mm Stack height: 130mm Hedpfxsx Hqnfs Adajh Programmer with color display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Side tables Knife change via control panel Weight: 1890kg 380V power supply Includes documentation, a tool kit, a safety knife change tool, a tapping block, a spare knife, and one machine knife.

Condition: good (used), Polar Mohr N92 PRO HD Paper Cutting Guillotine Machine in perfect condition, serviced, and ready to work. Manufactured in 2021. Unprecedented model on the market. Cutting visualization on the monitor. Technical specifications: Cutting width: 920mm Stack height: 130mm Programmer with a 21.5” HD color touchscreen display 400V power supply Hjdpfex Hqm Uex Adajh Weight: 2000kg Enlarged side tables Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered Hodpfxjx Hqmzj Adaoh

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 20051619, Basic Functions: Slit, Cross cut, Crease In-feed paper size: 210(W)x210(L) to 370(W)x520(L)mm Minimum finished size: 55(W)x45(L)mm Paper weight: 120 to 400gsm *Depending on paper quality Operation: 4" Touch Screen Job memories: 263 preset jobs & 150 customized job memories. (100 MANU SET + 50 FLEX MODE) Feeding mechanism Upper belt tri-suction suction feed (Patented) Side blower Skew adjustment Hodpfxshii Sws Adaoh Side aligner Double feed detection Cut mark registration Feed tray stacking capacity: 100mm Speed 8.8 sheets / min. : SRA3 21up business card 11 sheets / min. : SRA3 8up post card 12.2 sheets / min. : SRA3 4up greeting card 15.4 sheets / min. : A4 2 cuts & 1 crease

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 821301-10002, Equipment / Additional information: Hardware • OptiPrint™ media cleaner • Powered roll feed system with media flanges • Powered roll up system with media flanges • Baskets • Rear and Front Media sensor • Hard-Disk (2 GB job storage space) Hodpfshu Sawsx Adaoh Interface • 8-key control panel. • 4x20-character liquid crystal display. • English Display language. • Metric or English units. Functionality • 16 user configurations. • Auto Alignment system. • Up to eight colors/job • OptiTrac Ribbon save • Right side of band • OptiTrac colors : Mirror silver and Gold Cutting: • Concatenation and curve smoothing to obtain better cut quality. • OptiCut drag-movement optimization. • Overcut for easy weeding. • Multiple reprint feature (up to 999). • Flash Eproms With 5 cassettes and various color ribbons Operation manual

Condition: excellent (used), Year of construction: 1960, machine/vehicle number: 3/60 388, Format (cm): 80 Equipment / Additional information: 1xreserve knife Condition: Very good condition / New controller Hjdpfx Ademb U Rcoaoh

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 6386927, Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, 1xreserve knife Hydraulic precision drives for knives and press beams Continuously adjustable pressing pressure with display Hsdpfjup Awbox Adajh 99 memory programs with up to 99 steps

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 6173431, Format (cm): 72 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Special feature: The machine was modified by GOP, so that 72x102 cm sheets can be cut. Condition: Very good condition / total revised about 1.5 years ago Hsdpfjulxg Dox Adash

Condition: excellent (used), Year of construction: 1995, Usable work area with cutting head: 1000 x 1200 mm Usable work area with milling head: 950 x 1150 mm Cutting/milling speed: 10 mm/sec - 500 mm/sec Acceleration: up to 5 m/sec2 Mechanical/addressable resolution: 0.01 mm Static repeatability: 0.02 mm Software data format: ASCII/HPGL RS-232 interface or RS-232/USB converter Plotter input buffer: 16 kilobytes Hsdpfxjwgkyzj Adash Power requirements: 230 volts +-10% / 50-60 Hz / 450 VA Software: CoCut trial version can be downloaded for free. Converter is missing to be able to mill.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 3392-014, Format (cm): 76 Equipment / Additional information: Side tables, air table, 1xreserve knife Hodpewmlc Dsfx Adajh

Condition: excellent (used), Year of construction: 2014, Films up to 137 cm UV DRYER FCD-01 Hjdpfxsxcamyj Adajh (S. No.: 82252 // Age: 2008)

Condition: excellent (used), Year of construction: 2010, Format (cm): 55 Hjdpjxcaibefx Adaoh Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife

Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 5511244, Format (cm): 92 Hjdpfx Aot Hq Nmjdaeh Equipment / Additional information: Side table, air table, safety barriers, 1xreserve knife VIBRO TABLE RB2 M. No.: 5581092