Multi-saw with moving saw linck masker

Linck 900

Condition: new, Year of construction: 2025, Working width: 600 mm Working height: 220 mm minimum workpiece length: 250 mm aggregates: 4 1. saw-cutting aggregate Random System: saw-cutting optics 2. brush : metal, diameter 220mm 3. brush : Tynex grit 60, diameter 220mm 4th brush : Tynex grain 120, diameter 220mm Height adjustment: hand wheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Motor power saw-roughening gate: 1,1 kW Motor power brushes: 4 kW Motor power feed: 0,37 kW Machine length: 2800mm machine width: 1500mm Machine height: 1600mm Ndjdpfx Abshwrp Rsgjd Weight: 1500kg

Condition: excellent (used), Year of construction: 2020, Machine in very good condition, low hours – fully equipped. Additionally, 20 saw blades included in the set. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (tilting edge cutting) Max. log width: 1250/1090 mm Max. cutting length: 8 m Main motor: 45 kW Cast wheels Wheel width: 130 mm Wheel diameter: 1200 mm Lift up/down – double screw TR60x9 (18) + 11 kW Danfoss inverter + Siemens 3-phase motor with brake Electric lifting/lowering motor: 11 kW Nsdpfx Ajw E Ei Ujbgedd Saw blade PV 45, length 8685 mm, thickness 1.2 mm, width 140/150 mm Feed drive with electronic controls: forward/reverse feed, SEW gearbox with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electric disengagement Digital thickness adjustment with Wravor V280 program Hydraulic unit 40 l, tank with two pumps 13+6 l, 3 kW motor Complete hydraulic system Hydraulic blade guide, left and right (linear HIWIN) Hydraulic debarker / bark cutter: 1 Hydraulic board ejector: 1 Additional hydraulic board ejector and guide Side-mounted control panel Multifunction joystick with 2 positions: 1 Multifunction joystick with 4 positions: 1 Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust pipe + 4 brackets for pipe Water cooling – automatic hydrofor cooling system (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel lubrication system: 1 TRACK Welded frame, 14 m long Hydraulic clamp with two cylinders: 6 Hydraulic cant flipper: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Hydraulic log lifter with mechanical rollers: 4 Hydraulic log lifter with hydraulic rollers: 7 Set of lifting rollers: 7 hyd. + 4 m, 1 pc Hydraulic turner – new type: 3 Centering device – 1 set: 4 Hydraulic unit 120 l, tank with single pump 50 l, 15 kW motor + Danfoss inverter: 1 Cable carrier with energy chain: 14.5 m C-profile cable tray for ventilation – 4 double trolleys 4 m belt output conveyor with 1 m feed + 3 kW electric motor, front section with hydraulic lift

Condition: like new (used), A. COSTA PUMA 2/50 350/160 twin-shaft multi-blade saw - made in Italy TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 37 and 45 kW motors feed motor 3 kW adjustment of the width of the lower shaft blade diameter max 280 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm width of track 350 mm total power 85 kW two feed speeds 15 and 22 m/min central lubrication minimum workpiece length 600 mm electrical height adjustment shaft height adjustment six top pressure rollers pressure rollers mechanical Nedpfx Ajqy E Rlsbgodd four anti ejection latches cast iron construction spigot diameter 2 x 220 mm rotation of spindles 4500 RPM overall dimensions of the machine (length / width / height) 250 / 235 / 210 cm weight ~ 5000 kg

Year of construction: 2022, condition: new, Technical data: Nsdpsfxw H Aefx Abgjdd - load capacity: 10.000 kg - Own weight: 850kg - Insertable workpiece diameter: 50 - 3500 mm - Roll diameter: 250mm - Roll width 160mm - turning speed approx. 100-2.000 mm/min - Two-pedal foot switch - Potentiometer for infinitely variable speed control

Year of construction: 1999, condition: used, The DSG 200 vertical sawmill is an ideal option for carpentry shops specializing in furniture and wood flooring, it is efficient and performs effectively. A used Wintersteiger mini wood sawmill is a very good investment, a big plus of this machine is that it doesn't take up as much space as standard devices of this type, and at the same time it is great for processing raw material. It is used for cutting individual pieces and fitting them to the appropriate size. Operation of this device is not particularly complicated and can be learned quickly. The biggest advantage of our sawmill is its rich equipment, which includes, first of all, a saw sprinkler system, controlled from the panel, which allows precise cutting of wet raw material. It has an independent control for adjusting the height of the upper rollers, which makes it possible to set the height of cut faster. Pneumatic pusher to assist the feed TECHNICAL DATA: -Total power 27.3 kW -Air Jet system motor 2.3 kW -Siemens control panel -Propulsion up to 2m/min -Stroke of traction frame 210 mm -Stroke count 400/min -Cutting height, continuously (steplessly) adjustable on our frame 45-250 mm -Maximum cutting height possible is 400 mm ! -Cutting width with side pressure 80-205 mm -Block length min. 250 mm -Lam thickness from 1.5 mm - depending on the type of wood and cutting height -Blades used : 0,9-1,1 mm -depending on cutting height -Length approx. 5000 mm -Width approx. 1300 mm -Height approx. 2600 mm -Weight : 5000 kg Pneumatic pusher to assist the feed We add to the machine: -complete large saw frame , -small saw frame, -frame pins, -clamps for stretching the frame, -saw attachments, -wet cutting saws, -dry cutting saws , -a set of top pull rollers, Nsdpfx Abstvm Hdegodd - 4 pcs of bottom pull rollers, -complete sliders, -frame yokes, -pocket cutting guides , -loading magazines, -DTR documentation -electrical diagram

Condition: used, Year of construction: 2000, Debarking unit type VK 32 Njdpfx Abowwladogsdd !! Sale on behalf of customer !!

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Ndedpsu Atmuofx Abged Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), functionality: fully functional, SMELT professional Coating line LED/ All machines are used and still working well. Njdpjpyg Itofx Abgjdd

Condition: new, Year of construction: 2024, MULTIPLE RIP SAW ANGOMAC MAX DEPTH OF CUT 120 MM Nsdpfxoh Ia Upe Abgsdd Max. width of cut 480 mm Max. passage width 600 mm

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: KME 2/750L, Tension carriage for saw frame Nodpfxsv Umb Ee Abgodd Viewings are available by appointment.