Year of construction: 2014, Condition: excellent (used), Axle 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A - axis 360 degrees Minimum dimension: Plate: x = 300 mm Y = 120 mm Coljfmdcqjn H Svlsrb z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. bottom depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required extraction capacity: 2300 m3/h Location: comes to warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2017, Functionality: fully functional, CNC Machining Center SCM TECH Z5 Drilling unit with 18 spindles, 12 vertical spindles, 6 horizontal spindles Groove saw 5 axis Prism motor KT HSK mounting, liquid cooled Tool changer with 16 positions Laterally positioned changer with 8 positions Guebkpvowbhdyj H H Eja PC control Laser positioning cups Tool length measurement Waste conveyor belt Price collected t Celnowbhdyo H Svljrb Commissioning 2017, First owner, very well maintained. Disassembly and loading for the buyer. Available from September 2025

Condition: used, Year of construction: 2012, Working dimension X: 3.050 mm Working dimension Y: 850 mm Working dimension Z: 60 mm Number of milling spindles: 1 Main motor power: 5 kW Rotation speed max: 18.000 rpm Tool clamping system: ETP 25 Vertical drilling spindles: 13 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Barcode reader: Yes Safety device: enclosed cabin Crslewbgxvsn H Svleb Control: HOMAG POWER CONTROL PC 85 Software: HOMAG WOODWOP 6.0 Conformity marking: CE mark

Condition: used, Nesting work center with automatic loading and unloading Numerical Control with PC - ALPHCAM Software user interface + Alphacam Nesting software Working range in X axis mm 4200 Working range in Y axis mm 2100 Nesting work surface Automatic loading system with lateral table LH \ RH Panel detachment and loading system with 5 suction cups N° 1 vertical electrospindle 3 axes, KW 9, with automatic tool change, HSK F63 cone type Automatic tool change system with n° 6 positions Drilling head DH 17 with n° 17 vertical spindles Automatic unloading system with motorized belt Printing and application system of adhesive labels with labeler Protection and safety system with perimeter grids Safety system with front safety mats Automatic lubrication system Conditioning system for cooling and machine control cleaning No. 3 vacuum pumps 250 m3/h TECHNICAL DETAILS TO BE CHECKED Creln H Sswc Uwijvlsb

Condition: new, Year of construction: 2024, Morbidelli M200 CNC CONTROLLED MACHINING CENTER - C.E. Safety instructions - Morbidelli m200 3715x1620 Z250 - Volt 400 EU - Frequency 50 Hz - PRO-SPACE safety devices - Plate passage Y 2200 mm - Retractable safety belts - "TECPAD wired" remote control with 7" touchscreen monitor - Tool changer TRB14 (version Y=1620) - Tool changer FAST14 - 1 vacuum pump, output 250/300 m³/h at 50/60 Hz - Central optimized suction nozzle on rear drilling head - Drilling unit with pneumatic vertical positioning (single Z-axis) - RO.AX F31LTC drilling unit - Suction hood for drilling unit - Drilling unit with inverter - Pressure booster - 5-axis unit "Prisma 5" version "KT" - Suction hood for 5-axis electrospindle - 7-position extraction hood for 5-axis electrospindle - Device for liquid cooling (air type) - 6 "TV FLEXMATIC" work tables 1600 - Conveyor belt for chip and remnant removal for X=3710mm - Removable chip collection container at the end of the machine frame - Sensor for reading the tool length - 4 devices for loading aid H=75 1600 - Front stops H=75 for 6 supports - 12 x fixed suction cups 145x145 H=75 mm - 6 x rotary suction cups 145x55 H=75 mm Crslneu Illmo H Svlsb - Preparation for clamping cylinder for 6 supports TV FLEX / TV FLEXDRIVE / TV FLEXMATIC - Maestro connect: service contract for 1 year (kit gateway "plug&play" included) - SCM DIGITAL SOLUTIONS: MAESTRO CONNECT - Human-machine interface software (HMI) MAESTRO ACTIVE - Machine user interface software Maestro lab - Hardware key for Maestro - Additional hardware key for Maestro (for USB slot) - Mobile operating console "eye-M TOP" - TELESOLVE remote maintenance via the Internet - Mobile control unit with 6.5 m cable length - S-N-D 3-position selector switch - MACHINE LANGUAGE: German - incl. delivery, 3 days training in advance, 1 week installation and training - New machine is still in original packaging

Condition: new, Year of construction: 2025, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, rapid traverse Y-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 15 m/min, workpiece length (max.): 3,200 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 200 mm, workpiece weight (max.): 1,500 kg, Equipment: rotational speed infinitely variable, At Danmar Machines, we never stand still. We continue to lead the CNC world by simply doing what we love most: innovating, being reliable and ensuring that our customers are satisfied. We are always working on improving and trying to exceed expectations every time. Our team of technicians and designers is constantly working on coming up with smart, precise and powerful solutions. No challenge is the same, and we understand that all too well. That is why we think along with you and ensure customization that fits your situation exactly. compact- high precision machining center ( 0.01) Transport> Installation> CadCam software > starter kit cutting tools. Dimensions working area  1300 x 2600mm € 28,500,- Crjln H Svewc Uadelob  1600 x 3200mm € 31,500,-  2100 x 3200mm € 34,900, BudgeCraft CNC milling machines are assembled in the Netherlands according to the machine guidelines EG2023 EURPE CE-Norm. CE-Marking PILZ the spirit of safety Work table: The heavy chassis is a statically and dynamically welded construction, which is produced from stabilized steel. The solid construction ensures stability and high precision Portal: Portal construction high precision by means of Qantry drive accurate, - requires little maintenance. Qantry's linear guides that are driven on both sides meet the highest requirements in terms of precision and dynamics. Rack and pinion in X and Y axes guarantee high-precision movement. fast acceleration> deaccelerations, fast tool change. Milling motor ATC Spindle: Inverted controlled milling motor. 3 – 4 axes controlled 24,000 rpm. double linear high-precision guides guarantee utmost accuracy. The 2nd Z-axis is positioned by the ball screw spindle, this enables 3D and relief machining. Tools are automatically clamped. Drive: Brush pink servo motors: These motors enable accelerations and very high speeds. The use of these motors reduces maintenance thanks to the digital control and feedback. In addition, they ensure precision and a better finish during machining. Lubrication: To prevent lubrication problems during, this machine is equipped with a centralized automatic lubrication system Linear tool magazine: 10-12-16 position tool changer, automatic change during machining. Reference stops: less cutting loss, fast and efficient positioning with the stop cylinders on the front. Automatic measuring system for tooling: Work table and vacuum zones: Nesting CNC machining centre. Perfect nesting with the matrix vacuum table. With the well-thought-out grid geometry it is possible to vacuum clamp all formats and shapes. Reference stops can be mounted directly on the table in consultation. Vacuum zones can be easily selected on the sheet size, for carefree and safe material processing. Milling spindle protection cover: An important safety device that protects the motor from external objects and particles. CNC/NORM EG2023-EUROPE security: X-axis working area: 2600-3200mm Y-axis working area: 1300-1600-2100mm Z-axis stroke: 200mm Construction quantity: Yes Milling motor: 9Kw Servomotor (ATC spindle) Speed: 1,000-24,000 RPM X-axis travel: 50m/min Y-axis travel: 50m/min Z-axis travel: 15m/min tapping: ISO30-ER32-ER40 Software: Pegasus PWoodEntry Vacuum pump: included

Condition: new, Year of construction: 2024, CNC machining center ROVER A SMART 1632 Working area X = 3280 mm Y = from 1580 to 1660 mm, according to the working conditions Z = 200 mm - 5-axis machining unit and drilling unit, with vacuum modules H 74 mm Z 245 mm - 5-axis machining unit and drilling unit, with vacuum modules H 29 mm Workpiece passage: Y = 1900 mm Axis travels X = 3706 mm Y = 2294 mm Z1 = 515 mm Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. The machine has been designed to work with up to 2 pumps among those available. The electro-pneumatic pre-equipment is adequately dimensioned according to the number and type of pump selected. ASSISTING VACUUM SYSTEM - 2 areas It allows the clamping of workpieces through vacuum templates. 6 ATS workpiece supports 18 module supports Work table SA (Set-Up Assistant) for work tables up to 1550 mm. Supported manual positioning system with direction indicator and position indicator. Work table for processing solid wood. Subdivision of the pneumatic system into 2 working areas in X Rear row fence with 115 mm stroke and 25 mm fence extensions. The fences, pneumatically lowerable and CNC-controlled Stop of the middle row, positioned at 1080 mm, with 140 mm stroke. 4 side stops with 140 mm stroke complete with pneumatic equipment. 2 additional side stops with 140 mm stroke Sensor for monitoring the lowering of the stop. 4 positioning aids for vacuum module height = 74 mm 250 m3/h vacuum pump Vacuum module 132 x 146 - H74 mm Vacuum module 132 x 75 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles. Vacuum module 132 x 54 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles Chip conveyor belt Automatic lubrication system Machining unit with 5 interpolating axes 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled 11 KW (15 HP) from 12,000 rpm to 20,000 rpm, use S1 13 KW (17.4 HP) from 12,000 rpm to 20,000 rpm C-axis: 360° endless rotation Suction hood with 12 NC-controlled positions for electrospindle with 5 axes Coolant system Additional Z-axis support for rear machining units, with independent Z-axis BH 24 L drilling head 13 individually retrievable vertical drilling spindles with 32 mm pitch, 8 in X and 5 in Y 5 horizontal drilling spindles with double output and center distance 32 mm, 3 in X + 2 in Y 1 grooving saw in X d120 mm Cjlnjufggwj H Svlorb Turret tool magazine with 16 places, installed directly on the machining unit X Lateral tool magazine with 12 pockets in the machine bed HSK F63 tool holder, equipped with a long integrated flange, for saw blades on 5-axis head Digital devices for measuring the tool length with d up to 130 mm software B-Solid SOPHIA - IoT Connection SmartConnection NC-Hops 7.0 machine license 4-/5-axis NC-Hops 7.0 1.AV License 4-/5-axis Location: ex stock 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2018, CNC machine for plastic 1 Milling motor 5 axis 6th axis: rotary indexing table: lathe 2 automatic tool change Z high working field: 500 mm. Table size: 2.000 x 1.000 mm Crelnolu E U Ue H Svlsb

Condition: used, Year of construction: 2021, Working dimension X: 4.140 mm Working dimension Y: 1.570 mm Working dimension Z: 275 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Main motor power: 13 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: Yes Crelowbanken H Svljb 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 25 Linear tool changer: Yes Tellerwechsler 13-fach: Yes Vertical drilling spindles: 17 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction, in Y-direction BIESSE Drilling aggregate BH 29 2L: Yes Gantry machine: Yes Machine table: Pod and rail table BIESSE Machine table ATS: Yes Three stop ranges: Yes Electronic supervision of the end-position of the stops: Yes Workpiece support aids: Yes Number of consoles: 8 Pneumatic pipe connectors: an den Konsolen BIESSE Preparation for Uniclamp: Yes Positioning aid: Yes BIESSE SA machine table: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Barcode reader: Yes Safety device: Bumper Chip conveyor: Yes Interface for .dxf data: Yes Control cabinet cooling: Yes UPS - Uninterruptible Power Supply: Yes Automatic lubrication: Yes Remote control: Yes Package for abrasive materials: Yes Control: BIESSE BH 660, BIESSE bTouch Software: BIESSE B_SOLID, BIESSE BSOLID 5-ACHS-MODUL, BIESSE SOPHIA, BIESSE BSOLID DATENIMPORT Conformity marking: CE mark

Condition: good (used), Year of construction: 2014, Functionality: fully functional, Used SCM CNC machine - Model PRATIS S22-31 B - 2014 - GENIO CAD CAM software - Xilog software - HSK-63-F Crjlewc S Ewen H Svlsb - Drill head with grooving saw - Tool length measurement - 2 x 250 m3/h vacuum pumps - Mobile control panel - Includes outfeed conveyor/conveyor table

Condition: excellent (used), Year of construction: 2021, operating hours: 121 h, Functionality: fully functional, machine/vehicle number: 320.04.001.21, travel distance X-axis: 5,230 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece height (max.): 105 mm, overall weight: 4,100 kg, FOR SALE: FELDER FORMAT 4 CNC + FELDER RL 350 extraction system including piping and tools (milling cutters) FELDER FORMAT 4 • Type: Profit H10 22 43 c-tech • Serial number: 320.04.001.21 • Year of manufacture: 2021 • Operating hours: 121 hours • Safety system with safety mats • Mobile control panel with screen, keyboard, and mouse Creln H Sjwc R D Eevlsb • 2 vacuum pumps as standard, each with a nominal capacity of 250 m³ + a special version with a third extraction pump to ensure maximum cleanliness during milling • 8-position tool changer FELDER RL 350 extraction system including piping • 3 x 400V 50Hz 15HP 11kW • Maximum flow rate: 8000 m³/h • Nominal flow rate: 20 m/sec, 6920 m³/h • Negative pressure: 2630 Pa • Filter area: 71 m² • Extraction connection diameter: 350 mm • Residual dust content:

Condition: new, Year of construction: 2025, General specification FANTOM 2136, is associated with milling, optimizing, drilling in 2D and 3D processes of panels such as wood, fiberboard, chipboard, doors, furniture parts, plastic, alucobond (type of composite), aluminum and acrylic materials. The machine can be converted into a fully automatic production line. Technical specification FANTOM 2136 Working range 2100 mm x 3660 mm Z-axis 250 mm X-axis speed 90 m/min Y-axis speed 90m/min E0dkmojey Hnocm E T Ssld Uw Roi Rok Z-axis speed 30 m/min Motor power 11 kW / 15 hp HSK F63 Hiteco Spindle speed 24000 rpm Multi-drilling unit Celowc N Sbjn H Svljrb Control system Beckhoff PC based Cad Cam Software AlphaCam Lubrication system Automatic Tool cooling air cooling Tool change 16 pieces fixed magazine Standard Tool change Carousel: option Vacuum pump 250m3 Becker Vacuum area 9 automatic areas Power 25 kW Electricity 380V - 50Hz Weight 4040 kg Dimensions 3800mm X 5400mm.

Condition: ready for operation (used), Year of construction: 1999, Functionality: limited functionality, machine/vehicle number: 2092, travel distance X-axis: 36,000 mm, travel distance Y-axis: 5,800 mm, travel distance Z-axis: 1,250 mm, feed length X-axis: 36,000 mm, feed length Y-axis: 5,800 mm, feed length Z-axis: 1,250 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, controller model: NUM 1060 W, workpiece length (max.): 34,000 mm, workpiece width (max.): 4,500 mm, workpiece height (max.): 240 mm, workpiece weight (max.): 25,000 kg, total height: 4,825 mm, total length: 43,700 mm, total width: 11,855 mm, spindle speed (max.): 10,000 rpm, spindle motor power: 33,000 W, spindle nose: HSK 100F, number of spindles: 1, number of slots in tool magazine: 18, tool length: 400 mm, tool diameter: 750 mm, tool weight: 20,000 g, Equipment: rotational speed infinitely variable, CNC large joinery portal (manufacturer CMS, type "NC-PMC36-TUCU", year of manufacture 1999) for the processing of large-format solid wood components (glulam and CLT) for sale. Creln H Svsvitzzeljb The joinery gantry can be used for simultaneous 5-axis processing of large-format timber components up to 34.0 m long and 4.5 m wide. Among other things, this system was used to process the roof girders for the Expo roof in Hanover. The system consists of a massive movable bridge that is moved via guide rails at a maximum speed of 50 m/minute. The processing spindle is mounted on a carriage that enables movement in the Y and Z directions. A fourth axis allows the unit to rotate on the vertical axis, while the fifth axis allows the spindle to be tilted in the vertical plane. Today, the components are positioned on wooden beams in a fixed grid. The components can be machined on three sides using the appropriate sliding wooden blocks. Components with too little weight are fixed with screws during processing. Positioning is carried out using a laser system, which is not included in the scope of delivery. However, new laser systems can be implemented relatively easily. The system is currently controlled via a CAM system from Siemens. The CAM software is not included in the scope of delivery. However, all standard CAM systems can be used by adapting the post-processor. The vacuum system for fixing the components described in the enclosed order confirmation is not included in the scope of delivery. The system is extremely robust and solid and has provided good service for over 25 years. It can be inspected during operation. The guide rails, the bridge, the spindle and the entire mechanical design cannot be more robust and solid, even in new, comparable systems. However, it is recommended that the system be completely overhauled by means of a retrofit in order to comply with current safety regulations. Appropriate specialist companies can be named. The machine is to be handed over in April 2025 and dismantling should ideally be carried out by the buyer. However, only a limited time window is available for this.

Condition: ready for operation (used), Year of construction: 2010, WORK CENTER TO C.N. SCM Make: MORBIDELLI Model: UNIVERSAL 3612 Year: 2010 - Working range: 3.680 X 1.260 X 150 mm. - 1 Milling motor 8,5 Kw (11,5 HP) - 1 Automatic rotary gearbox with 12 positions Crsln H Sveqpggljljb - 1 Drilling comb with: 18 vertical + 8 horizontal + 1 "X" saw bits - Vacuum pump 250 m3/h - DXF compatible software - BUMPER protection - CE STANDARDS - Weight 3.000 Kg.

Condition: used, Year of construction: 2024, Working dimension X: 2.600 mm Working dimension Y: 900 mm Working dimension Z: 60 mm Number of milling spindles: 1 Main motor power: 4,5 kW Rotation speed max: 24.000 rpm Tool clamping system: Collet Vertical drilling spindles: 10 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction BIESSE Drilling aggregate BH 17 L: Yes Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Csln Hjwa S Rbe Svlsrb Safety device: Safety mat, enclosed cabin Control: PC control Software: BIESSE B_SOLID, BIESSE SOPHIA Conformity marking: CE mark, UKCA-Zeichen Total connection: 12 kW Weight: 1.800 kg Space requirement Length: 2,8 m Space requirement Width: 1,94 m Space requirement Height: 2 m

Condition: new, Year of construction: 2024, Functionality: fully functional, travel distance X-axis: 3,117 mm, travel distance Y-axis: 1,557 mm, travel distance Z-axis: 150 mm, rapid traverse X-axis: 25 m/min, rotational speed (max.): 24,000 rpm, spindle motor power: 14,000 W, number of spindles: 20, number of slots in tool magazine: 18, The new generation of Nesting CNC machining centers for flexible and batch-1 production combines excellent performance for increased flexibility and productivity. FLEXIBLE - Any way of processing without removing the spoilboard, even in 3D thanks to X-PODs and JQX (Just Quality eXtreme) 5-axis electrospindle. PRO-SPACE safety system - max speed of X axis = 25 m/min. Croln H Svewcqhqolob TABLE dimensions X= 3117 mm Y= 1557 mm; Z axis = 150 mm Electrospindle 14kW - up to 24,000 rpm; HSKF63 reception RO.AX F20LLR drilling head with 12 vertical and 8 horizontal drilling spindles FAST18 fast linear tool changer with 18 positions X-POD vacuum slippers – 12 pieces MAESTRO CNC and MAESTRO CONNECT (1 year) software

Condition: used, BIESSE ROVER35XL MACHINING CENTER Automatic bridge and suction cup movements 2 router heads, vertical and horizontal drilling 2 tool changers Crolswcl Tbon H Svleb 4th axis tooling included

Condition: new, The Holzprofi CNC machine offers working dimensions of 900x600x200mm, a solid cast iron frame and a mechanically welded sheet metal frame. This CNC machine allows you to cut, shape and engrave various materials as well as produce intricate designs and patterns precisely and efficiently. CE compliant, depth probe included. Advantages and features: -Large work surface for many applications, even for larger workpieces - Compatible with many drawing programs thanks to G-Code integration - Made from special steel, it ensures maximum strength and longevity and is suitable for use in all weather conditions - DSP control box guarantees efficient and safe operation - High durability thanks to solid design with cast table and mechanically welded sheet metal frame Technical data: Working dimensions (L x W x H): 900x600x200mm Cast iron frame: 1230x730x100mm Working height without legs: 750mm Motor: 2.2kW/3CV/230V spindle driven by frequency converter Stepper Motor: Nema 34 stepper motors for X, Y, Z and A axes Drive: The X, Y and Z axes are driven by 2505 ball screws Control: DSP type control box A-axis mandrel Ø: 100mm A-axis distance: 800mm Guide rail: 20x20mm ground stainless guide rail for ball supports Clamping option: ER20 clamp with Ø3, 6 and 12.7mm socket Base area: 1400x1180x1600mm Packaging dimensions: 1550x1235x1590mm Coln H Svjvrv Ayslerb Weight: 320kg

Condition: excellent (used), Year of construction: 2017, Weeke Optimat BHX 055 Colswakdaen H Svlsrb Year of manufacture 2017 Main use: approx. 900 operating hours Working area X 200 – 3050 mm Working area Y 70 – 850 mm Working area Z 12 – 60 mm, special workpiece thickness: 8 mm 13 vertical drilling spindles 4 horizontal drilling spindles in X axis 2 horizontal drilling spindles in Y axis Grooving saw in X direction Milling spindle 5 kW; 1250 – 24,000 rpm 4-station tool changer (WZW) Workpiece clamping system POWERCONTROL control system with 17-inch TFT flat screen, Windows XP operating system WoodWop 7.1 including MDE and production list software Delivery includes only all tools and HSK holders shown!

Condition: good (used), Code: 0409 Brand: THEOREMA Model: BR 3000 SPECIAL - CE Standard CNC boring and pantograph working centre with 3 controlled axis for furniture, kitchens, bathroom furniture, panels, doors and miscellaneous - CE standard Technical data: Minimum overall dimensions Useful length X axis mm 3000 Useful length Y axis mm 1300 X axis speed mt/min 24 Y axis speed mt/min 24 Z axis stroke mm 65 Max panel thickness mm 65 Boring unit with n° 18 spindles - Right-left drill chuck diameter mm 10 - Rpm 4000 Pantograph with pneumatic tool release - Motor Hp 7,5 - Rpm 0/18000 - Inverter for spindle Kw 5,5 Nesting worktable Suction cups mm 150 x 150 Rapid panel positioning Crjlneuwdnxs H Svlob Optimisation of the drilling path Specularity of drilling and milling cycles Interpolation on three X-Y-Z axis Vacuum pump cubic metres 100 Compressed air atm 6 Overall dimensions: mm 4400 x 1700 x 2400 h Weight kg 1200

Condition: used, Year of construction: 2022, Working dimension X: 3.050 mm Working dimension Y: 1.250 mm Creljwa Skbjn H Svleb Working dimension Z: 80 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 15 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable, Top and bottom Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Barcode reader: Yes Dowel insertion: Yes Dowel diameter: 8 mm Dowel length max: 40 mm Safety device: enclosed cabin Milling for fittings: Lamello Clamex Interface for .dxf data: Yes Control: Homag powerTouch, HOMAG POWER CONTROL Software: HOMAG WOODWOP, HOMAG tapio ready, HOMAG WOODWOP 8.0 Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 18 kW Weight: 3.975 kg Space requirement Length: 4,8 m Space requirement Width: 2,4 m Space requirement Height: 2,5 m

Condition: new, WOOD MILLING MACHINE AXOLOX SERIES Limited Edition We developed the new wood milling machine called Axolox specifically for nesting applications. Equipped with our "1-milling cutter principle", the innovative system enables extremely efficient applications with outstanding working speed and optimal material utilization. This also results in the lowest possible emission values. The torsion-resistant box construction, combined with advanced drive technology, promises the highest precision as well as almost maintenance-free components. Our Axolox wood milling machine quickly becomes the heart of every production process. It enables you to save time and material while increasing productivity. The mix of its most important advantages ensures the difference in woodworking: minimal space requirements, automated work processes and advanced safety technology - all of this makes the Axolox wood milling machine an indispensable all-rounder. SOFTWARE: • Our selected software combination impresses with its transparent operation. The range of services from simple contours to complex molded parts to the cutting-optimized nesting process sets no limits when using our machines. Thanks to our support in CAD, CAM and control software, you - as a user - are productive from day one! We offer various body generators to match the easy-to-use Axolox wood milling machine. The combination enables our customers to develop, plan and manufacture a complete piece of furniture in just a few steps. Technical data: • Travel: 2500 x 1300 mm • Dimensions: 3800x 2300 mm • Space: 20 m² • Weight: 1500 kg • Nominal voltage: 400 V • Accuracy: 0.1 mm +/- • Connection values: 4.3 kW • HF spindle: 2.2 kW Csln H Svsvyhudjlorb • Speed: 25 m/min Scope of delivery: • CNC wood milling machine including table opening pre-equipped lengthwise and crosswise • Machine control including hand control unit and laser scanner • Mechanics designed as a gantry drive in combination with profile guides • HF spindle HSD 2.2KW, air-cooled including holder and collets (16-part) • Tool length sensor • PC, mouse, keyboard, monitor in the ergonomic desk on the machine • Software package consisting of: CAD Rhino 7.0, control Beamicon2, CAM Estlcam V11 Optional: • Nesting as an extension to Rhino 7.0 (Rhino Nest) • Smart Wop body generator • Palette CAD • V-Carve Pro Vectric • Label printer including labels • Pneumatics including height adjustment • Tool set (10 pieces) • Office workstation with CAD Rhino 7.0 and Estlcam • Full-surface vacuum table including vacuum pump • Additional vacuum pump and laser scanner • Wall-mounted control • Basic and advanced training course (max. 4 people approx. 5 hours) • Enclosure with protective fence • Maintenance package • Hold-down device • Special suction shoe for e.g. plasterboard • Tool set in Systainer • Vacuum mat • Oscillating tangential knife Manufacturer information for wood milling machine:

Condition: used, Year of construction: 2012, Automatic CNC machining center for efficient and precise drilling and milling of panel furniture components wooden PC 85 numerical control - woodWOP 6 software Safety cabin for the working head N. 2 clamps for blocking and moving the piece during machining Loading bench by air curtain table Minimum dimensions of the piece (X - Y - Z) mm 250 x 100 x 8 (2 x 4 mm) Maximum dimensions of the piece (X - Y - Z) mm 3000 x 1000 (optional mm 1300) x 80 (2 x 40 mm) Possibility of processing two panels simultaneously N. 2 working heads (one lower and one upper) composed as follows: * Upper vertical work head N. 1 ETP-6 vertical electrospindle (power Kw 6) N. 1 Grooving saw (90° on the X-Y axis) dia. 125mm N. 32 vertical drilling spindles (power Kw 2,7) N. 10 Horizontal drilling spindles (8 in X + 2 in Y) * Bottom vertical working head N. 1 ETP-6 vertical electrospindle (power Kw 6) N. 1 Grooving saw (90° on the X-Y axis) dia. 125mm N. 32 vertical drilling spindles (power Kw 2,7) N. 10 Horizontal drilling spindles (8 in X + 2 in Y) Evacuation of the panel (panels) by motorized belt roller conveyor Security system with perimeter grilles and frontal safety mats Crslevz A E Ten H Svljb

Condition: good (used), Year of construction: 2006, Code: 0094 Brand: SCM Model: RECORD 110/S - CE Standard CNC working centre for doors, windows, furniture, arches and various - CE Standard - Year 2006 Technical data: X axis stroke mm 2990 - Speed 60 M/S Y axis stroke mm 1720 - Speed 45 M/S Z axis stroke mm 400 - Speed 25 M/S Working range X mm 3500 Working range Y mm 1815 Coln H Svel Tnvkslerb Workpiece passage mm 155 Electrospindle Kw 7,5 18000 rpm Tool attachment HSK 63 Automatic tool changer with 12-position "RAPID 12" UNIVERSAL K2 power unit fixed for horizontal working Bar table with suction cups : N° 6 TV tables with displays N° 2 workpiece loading aid lifters Vacuum pump 250 m³/h (5,5 Kw) Conveyor on electrospindle to eliminate chipboards and dust XYLOG operator interface CNC managed by PC with WINDOWS interface Suction N° 2 mouths diameter mm 150 Compressed air 7/8 bar Machine overall dimensions: Length mm 3710 - Width mm 2100 - Height mm 2700 Transport dimensions: Machine length mm 4600 - Width mm 2100 - Height mm 2600 + n° 3 Pallets (accessories) Weight kg 3700

Condition: good (used), Code: 0287 Brand: UNITEAM Model: MAJOR - CE Standard 5-axis CNC working centre - CE Standard Technical data: N° 2 5-axis milling routers with rotary tool changer with 12 spindles each Milling unit motor Kw 11 - Rpm 1000/18000 Double tool changer Working range X axis mm 5000 Working range Y axis mm 1800 Max workpiece thickness mm 600 Stroke X axis mm 6450 Stroke Y axis mm 2200 N° 2 Nesting tables n° 6 pneumatic reference stops each Lathe unit N° 4 vacuum pumps Becker m3 250 each Installed electric power Kw 30 Operating air pressure 7-8 bar Overall dimensions for transport: Machine mm 9200 x 2400 x 3400 h - 1° Working table mm 2800 x 3000 x 900 h - 2° Working table mm 2800 x 3000 x 900 h - Protection nets mm 2100 x 1000 x 700 h - No. 4 vacuum pumps mm 1200 x 700 x 600 each Crsln H Svotphn Rjljb Total weight kg 9000