Condition: used, Year of construction: 2022, Working dimension X: 3.050 mm Working dimension Y: 850 mm Working dimension Z: 60 mm Number of milling spindles: 1 Main motor power: 5 kW Crslquevn A D Nouc Sjb Tool clamping system: ETP 25 Vertical drilling spindles: 8 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Safety device: enclosed cabin

Condition: used, machine/vehicle number: 007851, X axis working area: 1200 mm Y axis working area: 2500 mm Working Table: Flat table Cslowayl Toquuc Ssrb Main Electrospindle power: 10 KW Number of controlled axes: 4 axes Total number of tool changer positions: 14

Condition: repair required (used), Year of construction: 2005, operating hours: 52,751 h, Functionality: unexamined, travel distance X-axis: 975 mm, travel distance Y-axis: 9,100 mm, travel distance Z-axis: 575 mm, nominal power (apparent): 12 kVA, controller manufacturer: BWO, controller model: CNC 920, workpiece length (max.): 8,500 mm, workpiece width (max.): 450 mm, workpiece height (max.): 225 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 20,000 rpm, overall weight: 16,600 kg, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, continuous operating pressure: 6 bar, MAKA AP70 5-Axis Year of manufacture: 2005 Weight of gantry including unit and tool changer approx. 15,000 kg Weight of control cabinet approx. 1,600 kg Celquujv Rlpyoc Sorb Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Compressed air consumption: approx. 2,000 l/h uncompressed Control type: BWO CNC 920 Controlled axes + max. travels approx. X - 975 / Y - 9100 / Z - 575 / A - +-270° / B - +-98° Milling motor: HSK 63F / 12 kW from 12,000 rpm, speed range: 1,000 - 20,000 rpm Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 positions / 160 mm Machine table: 2 clamping stations with 6 support crossheads with clamping / pneumatic clamping devices Workpiece cube dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +- 270° / B - +- 98° The machine is currently not operational. The spindle, including the conversion kit, must be replaced with newer software (available upon request from Maka). The machine can be inspected live in 94424 Arnstorf, Germany, by appointment. All information is provided without guarantee; sales to commercial customers only. Inspection and pickup by appointment in 94424 Arnstorf, Germany.

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 2700mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET Crolquot Tw S Usuc Sob DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: used, Year of construction: 2010, 5-axis machining center with nesting table Numerical Control with OSAI software Axis travel (X, Y, Z) mm 4950, 2050, 1000 Working range on X-axis mm 4250 Working range on Y axis mm 1560 Working range on Z axis mm 800 FT multifunctional nesting full-surface worktable No. 1 PRISMA 5-axis electrospindle, kW 12 (hp 16), 900 - 24000 rpm, rotation directions SX / DX Automatic tool changer with 12 positions, HSK-F 63 type cones * n 12 tools diameter 80 mm * n 6 tools diameter 160 mm * max tool diameter mm 250 * maximum weight per tool 4 kg * maximum weight in the warehouse 24 kg Drilling head with 9 spindles arranged as follows: - No. 5 vertical spindles; - No. 4 horizontal star spindles; * Distance between spindles mm 32 * rotation speed rpm 4000 * engine power kw 2.2 Protection and safety system with photocells and perimeter walls Automatic lubrication system Air conditioning system for the electrical panel No. 2 vacuum pumps, one of 250 m3/h Accessories and tools are sold separately Overall dimensions mm 7865 x 4200 x 4000 TECHNICAL DETAILS TO BE CHECKED Crelquowdvr Rouc Ssb

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 0-250-11-2532, Homag machining center the machine is fully functional and it is possible to test the machine in operation. Creljrmk Efoquuc Ssb

Condition: used, Year of construction: 2021, Working dimension X: 5.420 mm Working dimension Y: 1.350 mm Working dimension Z: 210 mm Number of milling spindles: 1 HOLZ-HER ChipControl: Yes HOLZ-HER 5-axes spindle 7844: Yes Main motor power: 13 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 33 HOLZ-HER Tool changer 7996: Yes HOLZ-HER Tool changer 7892: Yes HOLZ-HER Tool changer 7886 Pickup tool changing position: Yes Vertical drilling spindles: 10 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction HOLZ-HER Drilling aggregate 7882: Yes Cantilever machine: Yes Machine table: Pod and rail table Two rows of stops: Yes Workpiece support aids: Yes Electronic supervision of the end-position of the stops: Yes Number of consoles: 8 Cslev I Uuajquuc Ssrb Pneumatic pipe connectors: zentral 4-field processing: Yes Positioning aid: Yes Crosshair laser: Yes Vacuum pump: Yes HOLZ-HER ECO-Vac: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 275 m³/h Special workpiece clamping system: For windows Safety device: Safety mat Chip conveyor: Yes Interface for .dxf data: Yes Control cabinet cooling: Yes Automatic central lubrication: Yes Control: PC control Conformity marking: CE mark Weight: 6.500 kg Space requirement Length: 9 m Space requirement Width: 4,7 m Space requirement Height: 2,8 m

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 91/0-601 5005286, travel distance X-axis: 3,866 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 325 mm, Equipment: rotational speed infinitely variable, Brand: Holz-Her Model: PRO-MASTER 7123 320K Coljwdt Agequuc Sorb Serial Number: 91/0-601 5005286 Year of Manufacture: 2006 1 main milling spindle, 7.5 kW, liquid-cooled, 24,000 rpm - completely overhauled 01/2025 - 4 axes (C-axis), including 2 angle swivel gearboxes! 18 vertical drilling spindles, 4/2 horizontal in X and Y directions 1 grooving saw for sawing and grooving in X direction 1 mobile disc changer, 18 tool change stations 2 pickup change stations 8 crossheads/4 machining areas Working area X/Y/Z: 3200 x 1260 x 175 mm Max. travel X/Y/Z: 3866 x 1650 x 325 mm 1 vacuum pump 100 m³/h 3-field safety mats Software HOLZ-HER CAMPUS NC-HOPS, aCADemy, HOLZ-HER CAMPUS, two licenses available, operating system Windows Control cabinet cooling available Including handheld control unit Space requirements L/W/H: 6420 x 3760 x 2475 mm Weight: approx. 4200 kg Total connected load: 22 kW Tools and tool holders shown in photos are not included in delivery. Technical specifications are partly taken from the manufacturer's documentation. Actual values may vary. Condition: in use, ready for testing Availability: immediately

Year of construction: 1995, Condition: excellent (used), Crosshead table with 2 clamping circuits x- 5000 y- 1350 z-450 a-190* Crslquuogmt Ekjc Sjb Main spindle SK 40 water cooled 8kw up to 17000 rpm chain magazine with 24 places machine has not run much

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Max working height: 180mm Max working width: 500mm Creljt Txfpjquuc Ssb Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: used, machine/vehicle number: 007835, X axis working area: 3060 mm Y axis working area: 1200 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 21 Celewb Siyjquuc Ssrb Total number of tool changer positions: 10

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: O-201-90- 9480, Homag machining center with shaped edge banding the machine is fully functional and it is possible to test the machine in operation. Crolquujrmkp Rec Seb

Condition: good (used), Year of construction: 2019, Functionality: fully functional, The KIMLA BLACKBIRD 1520 CNC milling machine, built in Poland in 2019, is a high-quality machine with a robust design that enables efficient machining of exceptional quality and precision. The machine is equipped as standard with a head with an oscillating knife, allowing for cutting leather, cardboard, and foam of various thicknesses, among other materials. By replacing the knife head, for example, with a milling head, the machine expands its processing capabilities to include other materials. Processing takes place on a large, dual-function work table measuring 2000 mm long and 1500 mm wide, consisting of a vacuum table top and a T-slot table. During cutting, the material is held rigidly to the work surface by a BECKER blower (vacuum table) or by special accessories (T-slot table). The machine is equipped with additional cutting knives and a computer with specialized software, among other features. The KIMLA CNC milling machine weighs 1000 kg. Technical specifications of the KIMLA BLACKBIRD 1520 CNC milling machine Working table area (L x W): 2000 x 1500 mm Maximum material thickness: 14 cm Crsljwdqdhsquuc Ssb Head with oscillating blade Dual-function work table (vacuum table/T-slot table) Computer with operating software Side-channel blower: BECKER Additional cutting blades Blower motor power: 7 kW Power: 2 kW Pressure: 6 bar Power connection: 230 V; 50 Hz Machine weight: 1000 kg The KIMLA BlackBird 1520 CNC milling plotter has been regularly serviced during its service life and is ready for further use. The offer price includes instruction on the operation and maintenance of the machine.

Condition: excellent (used), MASTERWOOD Project TF Machining Center - Used - Through-feed machining, Air table in the work area, Hardened, dust-protected prism guides, Ball screws on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in the X direction, Manual central lubrication ----- Technical Specifications ----- Min. workpiece length X: 250 mm, Min. workpiece length Y: 100 mm, Min. workpiece thickness: 10 mm, Max. workpiece length X: infinite, Max. workpiece length Y: 1,000 mm, Max. workpiece thickness: 60 mm, Operating system: Windows, Machine control software: Masterwork, Number of vertical drilling spindles: 10, Number of horizontal double drilling spindles: 10 in X-direction: 2 pcs. Number of horizontal double drill bits in Y-direction: 1 pc. Saw blade Ø of saw unit: 125 mm Extraction connection Ø: 150 mm Required air flow: 2,000 m³/h Required air speed: 20/30 m/s Compressed air requirement: 1,000 l/min. Dimensions (LxWxH): 2,200 x 2,480 x 1,584 mm Weight: 1,500 kg Quality information: - Complete basic cleaning - Electrical system checked - Pneumatic system checked Colquuewb Evgjc Sjrb - Adjusted according to manufacturer's specifications - Ready for immediate use

Condition: used, Year of construction: 2003, Used machine Year of manufacture 2003 New HSD milling spindle 2023 not yet in use New drilling gearbox 2020 Technical specifications: X-axis working area 3400 mm Y-axis working area 1300 mm Z-axis working area 130 mm Max. workpiece size 3000 x 1300 x 100 mm X-axis speed 25 m/min Y-axis speed 25 m/min Z-axis speed 20 m/min Milling spindle motor speed 0-24000 rpm Drill spindle motor speed 3400 rpm Milling spindle motor power 7 kW Drill spindle motor power Tool changer Interface 2.2 kW 5-way ISO-30 Brushless motor power X-axis 5.39 N/m Brushless motor power Y-axis 5.39 N/m Power Brushless motor Z-axis 2.39 N/m Number of drill spindles 15 Crslokwg U Ssquuc Sob Grooving saw diameter 120 mm Vacuum pump 100 m³/h Max. installed electrical power 15 kW Extraction hose connection diameter 120 mm Machine dimensions (L/W/H) 4500 x 2000 x 2500 mm Machine weight 2400 kg Location: Röllbach Availability: Upon request

Condition: excellent (used), JET is a numerically controlled machining center with 5 interpolated axes, designed for machining operations as: Tenoning / Finger Jointing / Drilling Mortising / Milling / 4/5 axes profiling. Technical data: Crslquoirmyqjuc Sjb Full digital NC axes N. 5 Interpolated linear axes N. 3 Interpolated rotating axes N. 2 Longitudinal X axis 1,800 / 2,200 mm Transversal Y axis 1,300 mm Vertical Z axis 650 mm Length of clamp support table 1,400 / 1,800 mm A axis - Unlimited C axis +/- 180°

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Crjlquovctlgsuc Sob Total number of tool changer positions: 24

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Condition: Functionally tested Equipment and technical data: Milling unit 6 kW, water-cooled Tool holder HSK 63 F Speed 1,000 - 18,000 rpm. Tool changer: 6-way side Drill head: 9 vertical drilling spindles in 32 mm grid Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X direction Control: Twin CAm 32 Vacuum pump 100 cbm/h Crelquucjkwg Rvs Sob Incl. vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Installation dimensions 5200 x 2843 x 1855 mm Weight: Approx. 3,500 kg Availability: by arrangement Warehouse location: Röllbach

Condition: used, Year of construction: 2022, Used machine Year of construction 2022 Equipment and technical data: GRUNDMASCHINE DYNESTIC 7507 10.7_Push Processing length 3100 mm (without tools) CAMPUS V7 CAD/CAM software 1 x license incl. CabinetControl Base and material removal simulation upgrade "CAMPUS "" Better Nest"" Free-form nesting software " Uninterruptible power supply - UPS Milling unit 7830, power: 10.3 kW (S6/40) Chipcontrol sensor package for 3-axis spindle incl. receiver 7884 Drilling unit cpl. 14 spindles Drive power 3 kW Integrated sawing unit for sawing/grooving in X-direction n(max.) 1000-7330 min-1, infinitely variable 1 rear stop bar for processing field (field D) rear with 1 lateral stop (replaces lateral stops at the rear) Crslquujvyay Esc Sob Stop monitoring for 5 standard stops at the rear and right Tool changer 7873 , 6-fold linear pick-up Pneumatically liftable with integrated cover for HSK holders 2 additional holders for HSK holders for tool changer 7873. Tool changer 7872, 1-fold aggregate magazine swiveling in X and Y direction 2 x 140 m³/h dry-running vacuum pump Vacuum unit cpl, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection cpl. 16-circuit vacuum VF16 LASER,DIRECTION CPL POINT LASER CPL OPTION ZB8 Lubrication cpl. central lubrication encoder side 2 X vacuum cups for smooth table surfaces complete 140 x 115 mm, height 30 mm with connection hose 2 X vacuum cups for smooth table surfaces complete 120 x 50 mm, height 30 mm with connection hose Conveyor belt cpl. push-off conveyor AUT 5 10.7 Push-off table Additional suction via push-off conveyor belt Pusher on moving column, controlled incl. simultaneous suction of the wear plate Direct Label 7507 label printer and complete touch label ligth option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria Bavaria

Condition: used, Year of construction: 2012, Used machine Used nesting CNC from Holz-Her type Dynestic 7521 Basic machine - Dynestic 7521 20.6 Dynestic table For classic nesting processing with wear plate Machining length 6250 mm (DYNESTIC 20.6 additional 4th fence in Y already included) Machine frame in welded construction with welded and hardened prismatic guides for the traveling column, unit head and consoles Moving column in gantry design Crelquuorlp Disc Seb Rack and pinion drive, helical toothing, in X and Y direction, Ball screw spindles Z-direction for precise positioning Technical data: The technical data refers to the DYNESTIC 7521 - 20.6 Please refer to the corresponding data sheets. Machining dimensions: Max. Workpiece size for milling X = 6250 mm Y = 2100 mm Max. Travel distances X = 7360 mm Y = 2720 mm Z = 325 mm Max. Overtravel height DYNESTIC table Z = 1st step 318 mm / 2nd step 418 mm from top edge of table (without tools, without holder) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system Windows XP 80 GB hard disk / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsof t InteliEy e mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transfer of control and program data. Data is transferred via high-speed Internet connection Prerequisite: High-speed Internet connection on the machine. DYNESTIC table Fixed, continuous processing table with grid division, continuous grooves in X and Y direction, Spacing of the grooves 50 mm With 25 meter sealing cord for clamping the wear plate 1 processing area with stop bars / stop Height 30 mm, can be lowered pneumatically 2 stop bars in the Y direction and 1 stop in the X direction on the right (viewed from the front edge of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7976, 24 spindles Drive power 3.0 kW 18 vertical spindles can be called up individually L-shaped arrangement, 10 in X and 8 in Y direction 32 mm grid Max. Drill diameter: 35 mm Total drill bit length: 70 mm from screw-on end (depending on panel thickness) Spindle stroke: 70 mm Direction of rotation: Alternating right / left rotation n(max.) 1000 - 5710 min-1 infinitely variable Mounting: M 10 thread - fit 11 mm without tools, without holder 6 horizontal spindles 2 double drilling spindles in X-direction (distance 32 mm between 1st and 2nd horizontal drilling spindle) 1 double drilling spindle in Y-direction Holder: M 10 thread, fit 11 mm Total drill bit length max. 70 mm from screw-on end without tool, without holder Free space 1 for: Optional double drilling spindle in X direction or Vertical adapter with double feed force Free space 2 for: Optional saw in X-direction or Vertical adapter with double feed force Milling unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 min-1 infinitely variable, two-stage feed stroke max. power at 12000 min-1 to 24000 min-1 air-cooled

Condition: used, Year of construction: 2006, Used machine Year of construction: 2006 Condition: Function tested Equipment and technical data: Console machine Processing size in X: 3,200 mm Processing size in Y: 1,470 mm Max. Travel height in Z: 325 mm Milling spindle motor: 11 kW liquid-cooled Incl. laser pointer Incl. traveling disk tool changer 7996 with 18 places 6 consoles incl. 12 vacuum cups with separate lock case unit 7982 4 pneumatic lifting and lowering loading aids Incl. manual control unit Incl. 3-field safety step mats Incl. C-axis Horizontal drilling stations: 6 Vertical drilling stations : 16 incl. sawing unit 7946 pneumatically swiveling 3.5 kW Heat exchanger for switch cabinet cooling Manual central lubrication Vacuum pump 140 m³/h - generally overhauled - CAMPUS software for CNC machining centers Weight: Approx. 4,450 kg Cslquerc Itysuc Sjrb Availability: Short term Location: Röllbach

Condition: used, Year of construction: 2007, Used machine Year of construction 2007 Nesting machine with grid table Table working area 5000 x 1240 mm X-axis travel 5665 mm Crelqetlz Ihjuuc Seb Travel distance y-axis 1650 mm Z-axis travel 325 mm max. machining height 135 mm with milling unit 7933 Motor 11 KW (S6) HSK 63, water-cooled with C-axis with disk tool changer 18-fold with vacuum pump 250 m³ with manual control unit with central lubrication with minimum quantity lubrication device Availability: short term Location: Röllbach

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Condition: well maintained Technical data: Processing length in X = 200 - 3200 mm Max. travel without re-clamping 1300 mm in Y = 70 - 920 mm Crslquucoulp Edo Seb Material thickness Z = 8 - 70 mm Equipment: Milling unit: 6.5 kW (S6-40), air-cooled with HSK-F 63 tool holder Drilling unit: 1.7 kW, 15 spindles Tool changer: 6-way magazine pick-up system, pneumatic 19" flat screen Campus software 1 machine license inc. Cabinet Control light ECO vacuum system, 1-circuit vacuum system 8m³/h Automatic central lubrication combined lubrication points for all linear guides in X, Y and Z directions Milling tools are not included Scope of delivery! Availability: short term Location: Röllbach

Condition: used, Year of construction: 2019, Used machine Year of manufacture 2019 Basic machine - DYNESTIC 7532-10.5 Automatic Dynestic table For classic nesting processing with wear plate Processing length 3100 mm Machine frame in welded construction with ground and hardened prism guides for the traveling column, aggregate head and consoles Traveling column in gantry design Rack and pinion drive, helical gears, in X and Y directions, Ball screw spindles in Z direction for precise positioning Technical data: Processing dimensions: Max. support surface on nesting table: X = 3100 mm Y = 1560 mm Max. travel distances X = 4695 mm Y = 2100mm Z = 293 mm Max. drive-over height DYNESTIC table Z = 100 mm from top edge of table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min DYNESTIC table Fixed, continuous machining table with grid division, continuous grooves in X and Y direction, spacing of the grooves 50 mm with 25 meters of sealing cord for clamping the wear plate Vacuum field 1-circuit vacuum system Drilling unit 7877, 19 spindles Drive power 1.7 kW 13 vertical spindles can be called up individually Arrangement in U-shape 5+4 in X and 4 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from screw end (depending on plate thickness) Spindle extension stroke: 70 mm Direction of rotation: clockwise / anti-clockwise in Change n(max.) 1000 - 4400 min-1 continuously adjustable Mounting: M 10 thread - 11 mm fit without tools, without mounting 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Mounting: M 10 thread, 11 mm fit Total drill length max. 63 mm from screw end without tools, without mounting Milling unit 7842, Colqsu Druyeuuc Sorb Power: 12.0 kW (S6) n(max.) = 1000 - 24000 min-1 continuously adjustable, max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand threaded nut (for right-hand rotating tools) with collet chuck with HSK shaft Ceramic ball bearing (hybrid bearing) Tool weight max. 6 kg (incl. holder) Tools: milling and grinding tools max. Ø 160 mm Safety paneling in accordance with CE standard Safety fence on the side and rear Vacuum pump 500 m³/h dry runner Personal safety through light barriers in the front area of the machine Handheld control unit for remote control of the machine with the following operating functions: > Start / stop of the machining program > Speed control of the machining cycles > Reset button > Manual feed / rapid traverse for all axes > EMERGENCY STOP CAMPUS V7 CAD/CAM software 1x machine license Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS MT-Manager 3. CAMPUS Workcenter 4. CAMPUS DXF interface CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM properties for creating part variants with macro technology Automatic central lubrication Automatic lubrication according to defined lubrication intervals Additional sealing against dust through overpressure in each guide carriage Simultaneous lubrication for all linear guides in X, Y and Z directions, for all ball screws in Y and Z directions for all milling spindle guides

Condition: new, Year of construction: 2021, CNC machining unit for milling Tool spindle position: 90° Machine connection: Holz Her with HSK 63 F Drilling: 3000 - 9000 rpm Spindle speed: max. 15,000 rpm Gear ratio i = 1:1.5 Rotation direction: left/right Torque: max. 20 Nm Tool holder: ER32/ER16 Spindle for omega cutters: ER16 Cjlqswb Ehisuuc Serb Availability: Short-term Storage location: Hochheim