Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Cjdpfx Aex A Tcusgrohd Y axis working area: 2250 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 12 Total number of tool changer positions: 14

Condition: used, Year of construction: 2006, BACCI DOUBLE is a double head CNC machining center with 10 interpolated axes, numerically controlled, equipped with automatic hopper feeder. DOUBLE is designed for joinery operations as: tenoning, finger jointing, boring, mortising, milling, both at the ends of the elements and also between the ends. • Serial number AB 059, • 380 V, 50 Hz, 50 kW, • OSAI control, • Axes o X-axis 2400 mm, o Y-axis 650 mm, o Z-axis 1000 mm, Csdsx Dib Nopfx Agrshd o A-axis 360°, o B-axis 260°, • Machining dimensions: L min. 150 mm, L max. 2400 mm, W max. 250 mm, H max. 100 mm, • Input speed X, Y and Z axes 50 m/min, • Max. tool diameter 200 mm, • 4 tool positions per machining side, • 2 pneumatic clamps, • Spindle taper ER 32, • Spindle information right side: Speed 12000-24000 rpm, Power 7.4 kW, • Spindle information left side Page: Speed 12000-24000 RPM, Power 7.4 kW,

Condition: used, Year of construction: 2010, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, overall weight: 6,700 kg, Equipment: CE marking, Biesse Rover C 6.50 Config. 3 CNC machining centre 5-Axis Description Numerically controlled machining center ROVER C 6.50 Working fields - configuration 3 :X = 4600 mm; Y = 1535 mm; Z = 275 mm CE Safety devices 8 ATS panel supports - L = 152 5 mm - 32 sliding bases Automatic positioning of 8 panel supports and sliding bases (EPS X-Y ) Belt conveyor for the removal of chips and off-cuts Pneumatic locking system divided in 2 work areas in X 8 rear reference stops with a stroke of 115 mm 8 Stops with a stroke of 140 mm positioned at 1175 mm (L= 12 80 - 1525 - 1800 mm) 4 Side stops with a stroke of 140 mm (2 Lh + 2 Rh) inclusive of the pneumatic system. 4 removable central stops with a stroke of 140 mm (2 Lh + 2 Rh) incl. of the pneumatic system Chjdpfx Ajzqdmasgrjd Sensor for the detection of lowered stops Pneumatic system for lifting bar supports with double pneumatic stroke 6 lifting bar supports with double pneumatic stroke (H=74mm)uniclamps Vacuum system for a 250 m3/h pump 1 x 250 m3/h rotary veins vacuum pump for standard vacuum system Composition C3-A1 Operating unit with 5 interpolating axes Prearrangement for the assembly of chip deflectors with pneumatic or inductive sensor on a 5-axes operating unit Composition C3-P2 Chain tool changer with 33 places at 120 mm center distance Iron gripper on chain toolchanger for chip deflector compatible with 5-axes electrospindle RH Chip deflector for 5-axes operating unit Liquid cooling unit for liquid cooled systems Automatic lubrication system Software update from BiesseWorks Basic machine to BiesseWorks Advanced machine CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, number of slots in tool magazine: 23, total length: 10,000 mm, total width: 4,100 mm, Equipment: CE marking, documentation/manual, HOMAG BMG 311 Venture 316 XXL – 5-Axis CNC Machining Centre Lightly used and maintained in excellent condition, this HOMAG BMG 311 Venture 316 XXL is almost like new. The machine is equipped with a powerful 5-axis machining unit, 23-position tool changer, multiple vertical and horizontal drilling heads, grooving saw blade, and extensive routing and drilling capabilities. It is suitable for complex furniture, cabinet, door, panel, and solid-wood machining applications. Thanks to its versatile configuration, the machine can perform routing, drilling, sawing, grooving, and angled machining operations in a single setup. Cjdezp Ih Ejpfx Agrshd A highly capable and well-equipped CNC machining centre with very low operating hours, ready for immediate production.

Condition: used, Year of construction: 2001, Equipment: CE marking, Biesse Rover ROVER 24 FT CNC machining centre Description The work surface consists of a grid table consisting of two phenol tables with a size of 1540 x 1250 mm that can be linked. The grid table has a grid of 30 mm and vacuum openings of 9 mm in a grid of 150 mm in the X and Y-richting. The grid table is equipped with 6 pneumatic zero point cams at the rear and 1 on the left and right sides. • The working range of the machine is 3100 x 1300 x 155 mm. (Z-stroke 250 mm ) • The speed on the X-axis is programmable between 0 and 100 m/min. • The speed on the Y-axis is programmable between 0 and 100 m/min. • The speed on the Z axis is programmable between 0 and 15 m/min. • The three axes are driven by brushless digital DC servo motors. CNC numerical control type NC-500 Milling motor with automatic change system with ISO30. The power of this milling motor is 10.5 hp at 24,000 rpm 10-position tool changer that moves with the unit Drilling unit with fourteen independent drill spindles Groove saw Static frequency converter Centralized pneumatic system Centralized lubrication system Vacuum pump with a capacity of 250 m3/hour Two push-button control panels Working pressure for air 6 kg/cm2. Voltage 380 Volt, 50 Hz. Cjdpfxszqtzts Agrohd Safety mats on the front. CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Working area: 2700 x 1250 mm Z-axis travel: 160 mm Rotary axis: C-axis Spindle motor power: 8.5 kW Spindle speed: 24,000 rpm Tool changer (carousel): 8 tools (auxiliary magazine) Main tool magazine: 10 tools Cjdpszx Amnefx Agrshd Saw unit along X and Y axes Vertical drills along X-axis: 8 pcs Vertical drills along Y-axis: 5 pcs Horizontal drills along X-axis: 4 pcs Horizontal drills along Y-axis: 4 pcs Tool holder type: HSK 63 Central lubrication pump Vacuum raster table Edge milling unit along X-axis Year of manufacture: 2011

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,675 mm, travel distance Z-axis: 1,080 mm, number of slots in tool magazine: 4, total height: 2,354 mm, total length: 3,800 mm, total width: 3,050 mm, Equipment: CE marking, PADE TARGET – 5-Axis CNC Machining Centre with Additional C Rotary Axis Manufacturer: PADE, Italy Model: TARGET Year of manufacture: 2006 Condition: Used, fully operational Availability: Available for delivery November–December 2026 Technical specifications • 5 simultaneous CNC machining axes + additional controlled C rotary axis • Axes: X / Y / Z / A / B + C • C-axis rotary table usable during machining • X-axis travel: 1,600 mm • Y-axis travel: 1,675 mm • Z-axis travel: 1,080 mm • A-axis rotation: 360° • B-axis rotation: ±90° • Maximum working area: 1,600 × 1,100 mm • Machining head with 4 independent electro-spindles • Electro-spindles with ceramic bearings • Revolving machining head for rapid spindle/tool selection • Adjustable workpiece supports and clamping system • Suitable for routing, profiling, drilling, boring, mortising and tenoning • Particularly suitable for complex and curved solid-wood components, including chair, table and furniture parts Control system • Original WINMEDIA 93000635J industrial PC has been replaced by a standard PC Chjdpfx Ajzx S Afsgrod • Machine is fully operational in its current configuration • Available for demonstration in operation prior to dismantling Machine description The PADE TARGET is a versatile CNC machining centre designed for complex machining of solid-wood components, particularly chair, table and other shaped furniture parts. The machine combines simultaneous 5-axis machining with an additional controlled C rotary axis, which can also be used during the machining process. Together with four independent electro-spindles, this configuration provides high flexibility for machining complex three-dimensional components from multiple orientations. The machine is in fully operational condition and is currently installed and in use. The original WINMEDIA 93000635J industrial PC has been replaced by a standard PC, and the machine operates normally in its present configuration. The machine can be inspected and demonstrated under in our production plant in Laktasi, Bosnia and Herzegovina. Available for delivery: November–December 2026.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, workpiece height (max.): 30 mm, TECHNICAL DETAILS Axis: 920 mm X-axis: 3,000 mm A-axis: 360° Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min Minimum dimensions (plate): X: 300 mm Y: 120 mm Z: 12 mm Maximum/minimum hole diameter: 3 mm - 35 mm Maximum cutting depth with saw blade: 10 mm MACHINE DETAILS Motor power: 0.75 HP Voltage: 400 V Required extraction capacity: 2,300 m³/h EQUIPMENT 4-position drill chuck Saw blade in the X direction Cjdpozkt A Rjfx Agrshd

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: P260713248, 𝗢𝘃𝗲𝗿𝘃𝗶𝗲𝘄 The HOMAG VENTURE 115M is a high-performance, 5-axis CNC machining center designed for the precision machining of wood, wood-based panels, and similar materials. Its robust moving-gantry construction delivers outstanding rigidity, accuracy, and productivity for complex machining operations. 𝗠𝗮𝗶𝗻 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀 • 10 kW DRIVE5CS 5-axis spindle (8 kW continuous), 1,500–24,000 rpm. • A-axis: ±100°, C-axis: ±361°. • HSK F63 automatic tool interface with liquid-cooled spindle. • Suitable for milling, drilling, sawing, and true 3D machining. 𝗪𝗼𝗿𝗸𝗶𝗻𝗴 𝗔𝗿𝗲𝗮 • X: 3,100 mm • Y: 1,250 / 1,415 mm Csdpfx Agezmgkmerohd • Maximum workpiece thickness: 160 mm • Clearance height: 260 mm 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗘𝗾𝘂𝗶𝗽𝗺𝗲𝗻𝘁 • 12-spindle vertical drilling unit. • Horizontal drilling: 4 spindles (X) + 2 spindles (Y). • Automatic 90° grooving saw. • 21 automatic tool positions (14 rear + 7 side magazine). 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗛𝗮𝗻𝗱𝗹𝗶𝗻𝗴 • Vacuum console table with LED positioning. • Divided vacuum zones for pendulum processing. • Pneumatic stops and adjustable vacuum consoles. 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 & 𝗦𝗼𝗳𝘁𝘄𝗮𝗿𝗲 • HOMAG powerControl with 21.5" Full HD multi-touch display. • woodWOP CNC software with integrated 3D visualization. • Professional CAD/CAM package supporting DXF, STEP, and IGES. 𝗦𝗮𝗳𝗲𝘁𝘆 & 𝗘𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝗰𝘆 • CE compliant with bumper protection and laser safety scanner. • EcoPlus energy-saving mode and remote diagnostics via TeleserviceNet. 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 Furniture manufacturing, doors, windows, architectural millwork, solid wood components, interior fit-out, and complex 3D machining.

Condition: used, Double gantry-type machining center with two independent operating heads working on independent tables. • Year of manufacture: 2012 • Number and type of spindles / Machining heads: Two independent, liquid-cooled 5-axis heads (typically 2+2 compact electrospindles per head) operating up to 24,000 RPM. • Installed power / Electricity: 50 kW / 380 V / 50 Hz • Air consumption: Standard operating requirements for Bacci multi-axis pneumatic clamping and extraction circuits (typically a nominal pressure of 6 to 7 bar). • Machine weight: Approx. 6,000 kg Codjzmhz Hspfx Agrjhd • CNC / Control system: Industrial OSAI CNC system with high-speed servo drives. • Software included: Complete, featuring PITAGORA 3D optimization and simulation software for dynamic workload balancing. • Material handling integration: Fully integrated automatic hopper feeder system for synchronized loading and unloading of workpieces. • Data and system backups (critical advantage): For a seamless commissioning and startup, we include: o Complete copies of all parameter files for servopacks and inverters/frequency drives. o Full copies of the OSAI system BIOS and hard drive clones. o Backups on dedicated PCs containing Pitagora configurations. o Complete original documentation, both in physical and digital formats.

Condition: like new (used), DizArt CNC Router 1325 with Vacuum Table and 3.3 kW Spindle For sale is a DizArt CNC Router, model 1325, manufactured in December 2020. The machine is available immediately and can be inspected and tested at its current location in Antunovac, Croatia. The CNC router has a working area of 1,300 × 2,500 mm and is equipped with a vacuum table and vacuum pump. Technical specifications: Manufacturer: DizArt d.o.o. Machine type: CNC router Model: 1325 Serial number: 220 Year of manufacture: December 2020 Working area: 1,300 × 2,500 mm Machine rated power: 6 kW Power supply: 380 V Frequency: 50–60 Hz Vacuum table Vacuum pump Steel machine construction Spindle specifications: Spindle manufacturer: Teknomotor Spindle type/part number: COM31600453 Spindle serial number: 190007 Spindle power: 3.3 kW Rated voltage: 380 V (star connection) / 220 V (delta connection) Rated current: 7.9 A at 380 V / 13.7 A at 220 V Base frequency: 300 Hz Maximum frequency: 400 Hz Base speed: 18,000 rpm Maximum speed: 24,000 rpm Duty type: S1 Protection rating: IP54 Condition and availability: Year of manufacture: 2020 Condition: as new Availability: immediately Inspection and test run possible by prior arrangement Chodeznbr Iepfx Agred Price: €16,000 plus VAT

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Safety enclosure on the working head - Side safety metal grids - Front emergency carpets The following technical data are ESTIMATED and are not BINDING: Numerical Control with Software Biesse Works - Workpieces dimensions (workable panels): - Length: mm 90 - 3000 x Width: mm 70 - 1000 x Thickness: mm 8-60 (for longer panels than mm 2000, minimum thickness is mm 13) - No. 2 Grippers to keep fix the workpieces during process and 1 in-feed table (with air-blowing) - No. 1 Out-feed table, with motorized conveyoring belts BOTTOM WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe) Cedpfx Aozy Ngwsgrehd TOP WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe)

Condition: used, Year of construction: 2008, 3650 x 1560mm Matrix Table 4455mm x axis stroke [for routing] 1930mm y axis stroke [for routing] 250mm z axis stroke 150mm Max panel clearance X / Y Axes vectorial speeds 43m/min Z axis speed 15m/min Power 2000 Routing Unit 9 / 10hp for HSK63F toolholders. Speeds from 12000 to 18000rpm 250m3 / hr vacuum pump Telesolve long distance remote diagnostic system Fitted with following options Interpolating Z axis Centralised dust extraction system Pre-setting for angle driven heads TR10 Fixed 10 position toolchanger [ mounted on side of table ] R8 Rapid 8 position rotary toolchanger [ mounted on operating unit support beam ] 2 x Electronic detecting systems for panel height and tool length 3 x Additional rear stops Automatic centralised lubrication "PC Office" Console for easy movement around machine. Including Windows XP operating system 15" Colour monitor Keyboard CD Rom drive 40 Gbyte hard disk 128MB Ram Serial nr - AA2 / 000268? Chodjzd Utwepfx Agrjd Year - 2008 CE Compliant Condition - Good

Condition: used, Year of construction: 2007, - Working area: X = 4600 mm / Y = 1935 mm / Z = 275 mm - CE safety devices - 8 ATS plate holders - L = 1525 mm - 24 sliding rails - Automatic positioning of 8 plate holders and sliding rails (EPS X-Y) - Conveyor belt for removing chips and scrap - Pneumatic locking system, divided into 2 working areas in X - 8 rear reference stops with a stroke of 115 mm - 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm) - 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm) - 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - Sensor for detecting lowered stops. Chodjzux Nwopfx Agrod - Pneumatic system for lifting rod holders. - 6 lifting rod holders for easy loading - H = 74 mm modules. - Vacuum system for a 250 m3/h pump - 250 m3/h rotary vane vacuum pump for standard vacuum system Composition C3-A1 - Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit. - Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position. Composition C3-P2 - Additional Z-slide for rear work units, controlled by an independent Z-axis - 16 vertical and 4 horizontal drilling spindles in the Y direction - Chain-type tool changer with 22 positions at 180 mm center distance - Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer - RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle - Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head. - Automatic lubrication system - Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions. Note: - Additional overhauled 5-axis main spindle - 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction Cedpjzux Tpjfx Agrohd - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm Cedpfxjzuygqo Agrjhd • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: used, optional equipment: Machine table in 2 support systems – left table half with TVN supports, right table half with ALU table and its own vacuum circuit. Travel ranges: X = 4400 mm, Y = 1720 mm, Z = 400 mm Tool holder HSK 63 F Motor 7.5 kW, 900 - 20,000 rpm Inverter 18 kW for spindle unit – increased power output up to 11 kW Tool changer RAPID 24 = 24 tool positions Drilling unit with 18 spindles Equipment for door processing (H = 110 mm) - for processing left and right doors - with 4 pneumatic positioning aids, each with a capacity of 20 kg - 6 reference stops with veneer overhang Laser positioning for TV system Central extraction connection above the CNC unit Vacuum pump 250 m³ Control system/control cabinet: - NUM Series 1000 with Office PC - XILOG-PLUS - Cable remote control - Analog modem with software for teleservice Chodpfx Ajzxzgmsgred Swinging machining standard for 2 work areas LED display / suction cup positioning Motorized chip conveyor 3-part floor mat / front Large accessory package with vacuum suction cups, stops, etc. Machine from a carpentry business closure due to retirement Machine is still in operation and in very good condition available at location

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Working range X: 3855 mm Working range Y: 2650 mm Working range Z: 200 mm 5-axis electrospindle Vertical drilling heads: 29 Horizontal drilling heads X: 6 Horizontal drilling heads Y: 4 Saw blade for grooving in the X direction 33-position chain tool changer Worktable with 6 supports Chedsz Atb Rspfx Agred 250 m3/h vacuum pump (2023) Software: BiesseWorks and NC-Hops Direkt installed Chip conveyor belt Safety mats Protective netting Approximate weight: 6300 kg Only 2572 hours on the 5-axis spindle and 1488 hours on the drilling unit Available at the end of November 2026

Year of construction: 1994, condition: used, - More information: on request Chsdpfsnzh Uxsx Agrod

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 2700mm Max working height: 180mm Cjdpfx Agst Tw S Ujrehd Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Cjdpfst Txfpox Agrshd Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: excellent (used), Year of construction: 2003, Year of manufacture: 2003 Voltage: 400 V Frequency: 50 Hz Weight: 3200 kg Chjdpstr A Evsfx Agrsd Number of axles: 3

Condition: used, functionality: fully functional, Alberti Format 90 CNC machining centre for sale! Technical specification Working area 3000 x 1250 mm Chjdpfxex Ey Sds Agrod Max. panel thickness 50 mm Max. programmable speed axis X 40m/min, axis Y 40 m/min, axis Z 9m/min Spindles motor power n.2-2 HP - 3000 rpm 27 vertical independent spindles on 32 mm centers Possibility to mount 4 router with cono morse Router speed and power outpust 18000 rpm Possibility to mount 1 saw Saw speed and power output 12000 rpm Operating pressure 6 bar Total weight 4450 kg Dimensions incl. electr. cabinet 5800 x 3450 x 1950 mm

Condition: like new (used), Year of construction: 2020, functionality: fully functional, We present a fully automated fiber laser cutting system with integrated storage, robotic handling, and high-speed precision performance, designed for industrial production environments. KIMLA POWERCUT LF1530 Fiber Laser Cutting System (Fully Automated Line) Model: KIMLA POWERCUT LF1530 Manufacturer: KIMLA Year of manufacture: 2020 Compliance: CE certified Control system: Full CNC digital control Technical Specifications Installation length 12,500 mm Installation width 7,200 mm Installation height 3,000 mm Nominal sheet size (X axis) 3000 mm Nominal sheet size (Y axis) 1500 mm Cutting area X axis 3050 mm Cutting area Y axis 1550 mm Cutting area Z axis 120 mm Max positioning speed (all axes) 230 m/min Max positioning speed (X/Y axes) 230 m/min Max positioning speed (Z axis) 70 m/min Acceleration (X/Y axes) 6G Repeatability 0.001 mm Positioning accuracy 0.002 mm Max workpiece weight 900 kg Laser source Fiber laser, 4000 W (IPG) Pulse frequency ±1–2500 Hz Total power consumption (excluding extraction & chiller) 30 kW Drive system Linear drives on all axes Optical linear encoders Yes Part measurement/scanning system RENISHAW or equivalent, inductive Automatic sheet loading/unloading & storage system Integrated, 12 positions, 2000 kg each Chedpfey Nwtyex Agrsd Shuttle tables Yes, 3 Table exchange speed 1 m/s Tube cutting option Yes, on third pallet Dynamic motion control (trajectory optimization) Yes Robotic part handling system Yes, robotic arm with full integration Documentation English CE compliance Yes Control system Digital (CNC) Spare parts and tools Yes

Condition: used, Year of construction: 2008, machine/vehicle number: 97457, functionality: fully functional, input voltage: 380 V, input current: 52 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 1,550 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, number of slots in tool magazine: 120, actuation type: electric, total height: 2,600 mm, total length: 6,500 mm, total width: 7,500 mm, overall weight: 12,000 kg, Equipment: CE marking, documentation/manual, FTT Insider R8 drilling center with transverse feed, equipped with 4 upper tool heads. Each head features: Chsdpfx Agezypnbersd a) two sets of vertical drills with a 32mm spacing: 18 spindles in the Y-axis, 14 spindles in the X-axis, and an additional 4 horizontal spindles in the Y-axis. b) an electric spindle unit with a power of 3.8 kW and an ISO30 chuck. The machine also has two horizontal drilling units, each consisting of two units equipped with 18 spindles with a 32mm spacing. The machine is equipped with two chain-type tool magazines for vertical drills: 60 positions each. Belt conveyors at the inlet and outlet allow for manual loading of parts; it is also possible to operate the machine in a production line.