Used Broaching & slotting & drawing machines for sale (158)

Condition: used, Multi-wedge broach, hexagonal broaching tool, broaching tool, broach, special tool, grooving tool, grooving machine, slotting machine, slotting machine, slotting tool, slotting broach -Manufacturer: SWZ, broach, impact broach -Type: SW 19 1TGL 29-16600/02 20/50 HSS -Item no.: 440 0432 08 102 04708 -Width: Hexagonal 19 mm wrench width, see photos Cjb Hoitt R Socacqorb -Quantity: 1 piece available -Total dimensions: 950/22/22 mm -Weight: 1.7kg

Condition: used, slot-milling length 300 mm groove width 34 mm flute depth mm cutting speed 6 m/min return speed 6 mm/min clamping plate 380 x 300 mm weight of the machine ca. 285 kg dimensions of the machine ca. 590 x 1150 mm Bore-Ø min.: - with spezial knifes: 6 mm - with ram inserts: 20 mm Crjbed Ih Uie Hcacqob - with normal bumper: 40 mm Electromagnetic Brake with various accesssories (see pictures)

Condition: used, groove width 3 - 50 mm drawing length 315 mm working speed 3 - 15 m/min total power requirement - kW weight of the machine ca. 1 t dimensions of the machine ca. 1,5 x 1 x 1,6 m No. 3327: wedge and keyway drawing machine manufactured by WGW, type NZM 50/330 Accessories: Creb Hcacoulntgoqeb 8 drawing tools: 1 x 8 mm / 2 x 10 mm / 1 x 21 mm / 4 x 22 mm Working speed 3-14.7 m/min Groove width 3 - 50 mm Groove length up to 315 mm Space requirement 1.5 x 1.0 x 1.6 m Weight 800 - 1000 kg

Year of construction: 1961, Condition: good (used), groove width 50 mm drawing length 320 mm working speed 4 m/min total power requirement 5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 0,8x0,8x1,8 m Stuhlmann vertical wedge grooving machine 320-S Groove width: 50 mm drawing length: 320 mm Working speed: 4 m/min pressure capacity: 3 t working length: 320 mm working width: 30 mm Cjb Hcasul Ek Ajcqorb Capacity: 3

Condition: excellent (used), Punch St 225 Hydropneumatic, air consumption 9l/per stroke Cjb Hcajt Sigzjcqorb Ram stroke 30 mm Punch pressure 3600 Kp at 6 bar 6000 Kp at 10 bar Pressure ratio 1:6 Foot switch Projection 100 mm, table surface 280 x 200 mm Weight 60 kg

Condition: ready for operation (used), Romanian Slotters MH500, M 320 And M 200 Stroke 500mm, 320mm and 200mm Csb Hcacstz S Hcjqerb

Condition: used, Multi-wedge broach, broaching tool, broach, special tool, grooving tool, grooving machine, slotting machine, slotting machine, slotting tool -Quantity: 2x tools available -Price: complete 2 pieces -1x tool: Ø 16 0.056 -1x tool: Ø 15.75 x 16Ø S8 Csbob A I Upj Hcacqerb -Weight: 2kg

Condition: used, BROACHING MACHINE Csbet Hr Dfs Hcacqerb

Year of construction: 1962, Condition: used, groove width 6-20 mm drawing length - mm working speed - m/min total power requirement 3 kW Cob Hst Tq H Ejcacqsrb weight of the machine ca. 0,7 t dimensions of the machine ca. 1 x 0,7 x 1,6 m No. 0319 Grooving machine with various drawing tools Frömag KZ-22 5 drawing tools in the sizes 6 / 8 / 10 / 12 / 20 mm 5 holders for bores from 10-35 mm Transport dimensions approx. 1000 x600 x1600 mm Weight approx. 700 kg

Year of construction: 2000, Condition: good (used), max. ram stroke 2 - 300 mm groove width 2 - 32 mm power capacity 8 kW no. of strokes 2 - 300 Hub/min throat ca. 300 mm Max. installation height ca. 450 mm Cebsuayibe Hcacqsrb automatic feeds 0,01 - 0,15 mm work speed 0 - 30 m/min return speed 30 m/min weight of the machine ca. 2,2 t dimensions of the machine ca. 2,5 x 1,5 x 2,2 m The BALZAT keyway jointing machine is characterised by the following advantages: - Infinitely variable adjustment of the jointing speed with constant return, even during the work process - Simple clamping of the workpieces with standard clamping devices, without additional tool holders - Extreme dimensional accuracy thanks to self-centring, centrally arranged blade holders - Feed rate can be changed during the programme sequence - Machine base is also a container for cutting oil - all components are easily accessible and replaceable

Year of construction: 2011, Condition: excellent (used), Functionality: fully functional, Tool travel : 0-315 mm Strokes per minute : 14 - 60 Ram adjustment : 235 mm Swivel angle of head : ±45° Head to table distance : 510 mm Tool to column distance : 460 mm Diameter of rotating table : 450 mm Diameter of central hole of rotating table : 80 mm Number of fixed positions of rotating table : 24 Longitudinal travel of worktable : 265 mm Transverse travel of worktable : 200 mm Self-breaking main motor : 4 kW / 5.5 h Ceb Hcasvfctfocqerb Weight : 1310 kg Overall dimensions : 1000 x 1500 x 2250 mm

Condition: reconditioned (used), Functionality: fully functional, cutting length (max.): 3,150 mm, ESPE HYDRAULIC guillotine shears model CNTA 16A/3150 FOR cutting sheet metal Output parameters of the machine: - maximum cutting length - 3150mm, - maximum thickness of cut sheet metal - 16mm, - table width - 160mm, - cutting angle - 0.5 - 2.5 degrees hydraulically adjustable, - working height of the table - 850mm, - beam drive and sheet metal pressure - hydraulic, - adjustable gap - electric drive, - adjustable depth (width) of cut - depending on the set angle, - main drive 30kW, - auxiliary drives 2.5kW, - adjustable numerically controlled bumper - AC servonap, - friendly and simple CNC numerical control - weight about 16500kg, CNC control: Control built on the basis of industrial automation components (from Delta Electronics) equipped with a touch-screen operator panel for setting work parameters: - setting the thickness of the material (automatic slot adjustment) - setting the knife working depth (cutting width - reducing time when cutting narrow details) - setting the position of the cut material bumper Creb Hcaouq Eh Socqsb - setting the working angle of the knife - possibility to program a sequence of cuts up to 50 operations for one sheet (automatic change of depth setting, bumper setting, sheet thickness, knife angle setting, cutting width) after each cut. This makes it possible to cut the entire sheet in a preset sequence, without the need to constantly rearrange the sheets.

Condition: used, Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: Planeta Coswig, broach push broach -Type: 16D11x2.7 34-120inSt 34-165inGG - Width: 16mm -Number: 1x available -Total dimensions: 1250/16/H30 mm Crjb Hoitt Saecacqsb -Weight: 4.2kg

Condition: excellent (used), Functionality: fully functional, Slotting machine Urpe model M-300 G of tilting head, Slotting of course of 0-300mm of travel, number of blows per minute 30-35-40, distance of the tool to the column 500mm, distance adjustable from the table to the ram 425 -585mm, max distance between tool and body 450mm, table surface 800x325mm, long table travel 550mm, rec transv 265mm, motor pot 5.5cv, estimated weight 1850kg, with Chuck Ceb Hcasvdknzjcqerb

Year of construction: 1983, Condition: excellent (used), machine/vehicle number: 03.2133, Arthur Klink - internal broaching machine (KOM 138) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 16 x1250 x400 built in: 1983 stroke: 1250mm pulling force: 16.000KG working stations: 3 PCs Crsb Hod Nb A Nscacqob drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: in an excellent condition, ready to use, perfect slides Optional accessories available on request: pulling head, pick up tool holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Condition: new, diameter 12 - 30mm der Buchsen groove width 4 - 5 - 6 - 8 mm weight 14 kg dimensions 400 x 150 x 250 mm length mm Groove widths: 4 - 5 - 6 - 8mm Diameter of the guide bushes: 12 - 14 - 15 - 16 - 18 - 20 - 22 - 44 - 25 - 26 - 28 - 30mm Crob Hcaju Imi Hjcqsb

Year of construction: 1964, operating hours: 9,999 h, Condition: repair required (used), machine/vehicle number: 23765, Hydraulic grooving machine Cjb Hjupihtscacqsrb incl. many accessories (knife holder, knife step bushes etc.) A frame was specially designed and manufactured for this machine in 2023 so that it can be set up in a hall that does not allow the machine to be sunk into the floor. Currently, a plastic gear wheel for the feed is defective, which is why the machine is not in operation and is therefore sold as defective. Inspection possible at any time by arrangement Only to self-collectors, disassembly and transport by buyer

Year of construction: 1956, Condition: used, Slotting machine, slotting machine, high-speed planer, keyseating machine, keyway broaching machine, keyway broaching machine, keyway tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, power high-speed planer -Manufacturer: Lange & Geilen, horizontal slotting machine Kraft-Schnellhobler -Stroke: 350mm -Stroke rate: 20 - 110 1/min -Clamping table: 380 x 280 mm Crjb Hcaelzmxyscqob -Travel: X 410 mm Z 320 mm -T-Slot: 14mm -Propulsion: AEG 3 kW -Dimensions: 1460/1170/H1350 mm -Weight: 1140 kg

Year of construction: 1962, Condition: good (used), machine/vehicle number: 1886, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 10.000 kg clearing length: 1.200 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 8.0 KW Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and in the feeder. Creb Hst Dwb Decacqjb The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: new, weight max. in kg 5000 kg connected load frequency 230 V Cob Hcaoupxr Ijcqsrb weight 12 kg dimensions 700 x 300 x 300 mm Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable.

Year of construction: 1956, Condition: used, Slotting machine, slotting machine, quick planer, keyseating machine, slotting machine, slotting machine, slotting tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, schepping -Manufacturer: Elliott, horizontal shaping machine type 24M SHAPER -Stroke: 610mm -Stroke rate: 8 - 74 1/min -Clamping table: 580 x 330 mm -Travel: X/Y/Z 375/755/292 mm Csb Hcash Nvy Escqjrb -T-Slot: 20mm -Drive: 3.7 kW -Dimensions: 2080/1120/H1550 mm -Weight: 1520 kg

Year of construction: 1989, Condition: repair required (used), Functionality: limited functionality, machine/vehicle number: 10105, Manufacturer: Rausch (Haan/ Rhld) Model: RS 10 / 1300 Machine no.: 10105 Year of construction: 09/1989 Weight: 1.650kg Attention: all further details as well as our direct contact details can be found in the attached PDF document general / technical data: mechanical vertical broaching machine Rausch, conditionally ready for use Tractive force: 10.000kg (100KN) Clearing speeds: 3m/min and 6m/min Return speed: 10m/min Csboufifps Hcacqerb maximum stroke: 1,300mm maximum tool length: 1,500mm table size / work surface: 700x560mm / 600x400mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: any Dimensions (h x w x d): 2,450mm x 1,100mm x 1,200mm (h= table height to floor without superstructure) Motor: 8.5 kw Power supply: 400 Volt / 50 HZ Accessories / special equipment: - Welded machine base - Welded machine stand - Machine table made of gray cast iron - Integrated coolant system - 3-speed motor for 10m/min return Remark: The machine is dirty and has not been reconditioned. The machine is conditionally ready for use. The machine base is in good condition. If required, the machine can be offered overhauled. The overhaul can be carried out in various stages to meet customer requirements. The machine is in our warehouse and can be inspected under power. General information The double spindle drive ensures a smooth and central pulling point as well as a constant clearing speed. Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways. Due to the universal design of the drawbridge and the machine table, broaching with profile and flat broaching tools is possible without the use of additional pulling heads. Used broaching tools and broaching mandrels suitable for the machine are available on request. Furthermore, we always have a large number of approx. 80 used broaching machines from various manufacturers in stock.

Condition: new, diameter 32 - 50mm der Buchsen length 350 mm groove width 10 - 12 - 14 mm weight 20 kg dimensions 400 x 150 x 250 mm Groove widths: Crsb Hceupxk Djacqjb 10 - 12 - 14mm Diameter of the guide bushes: 32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm

Condition: used, Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: SWZ, broach push broach Csbeitt Rys Hcacqsrb -Type: B 6 J9x1.8 RL 24-72mm -Item no.: 45 0014 134 1260 000 -Width: 6mm -Number: 3x broach available -Price per piece -Total dimensions: 900/6/H13 mm -Weight: 0.5 kg/pc.

Condition: used, Year of construction: 1979, Functionality: fully functional, machine/vehicle number: 17065, Manufacturer: henning Model: U6/1000 Machine no.: 17065 Year of construction: 1979 Weight: 1.100 kg General / technical data: used mechanical vertical broaching machine Henning, in working condition Tractive force: 6,000kg (60KN) Clearing speeds: 3m/min and 6m/min Return speed: 6m/min maximum stroke: 1,000mm maximum tool length: 1,200mm table size / work surface: 600x460mm / 480 x340mm Table aperture: Ø 170mm with eccentric table insert with Ø 90mm bore for standard broaching mandrels (Rausch system) Workpiece diameter: any Dimensions (h x w x d): 1,650mm x 1,200mm x 700mm (h= table height to floor without superstructure) Motor: 7.4 /10kw Power supply: 380 Volt / 50 HZ Crob Hcajup Uzfocqsb Accessories / special equipment: - Integrated coolant system - Return circuit with double actuation mode - Machine documentation - Automatic clamping jaw opener in the lower drawbridge position (tool removal) - Tool clamping with universal clamping jaws for flat shanks DIN 1416 BL 6 Remark: The machine is in original condition, the function has been tested. The machine is mechanically driven by a trapezoidal threaded spindle and a geared motor. In contrast to most mechanically driven broaching machines in which the trapezoidal spindle forms the drive and guide element, this machine has additional guide columns. The machine is therefore additionally column-guided and very stable. The double spindle drive is ideal for a continuously constant cutting speed, even with higher tensile forces. The machine is in our warehouse and can be inspected under power.