Used Keyway for sale (107)

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AA1/018/23, functionality: fully functional, operating hours: 12,371 h, travel distance X-axis: 5,709 mm, travel distance Y-axis: 1,650 mm, working width: 1,260 mm, milling spindle speed (max.): 20,000 rpm, working length: 5,200 mm, TECHNICAL DETAILS Working area X: 5,200 mm Working area Y: 1,260 mm Main spindle travel X: 5,709 mm Main spindle travel Y: 1,650 mm Number of workpiece consoles: 8 Drilling unit Total number of drilling spindles: 18 Vertical drilling spindles: 12 Horizontal drilling spindles: 6 Horizontal drilling spindles in the X direction: 4 Horizontal drilling spindles in the Y direction: 2 Milling spindle Motor power: 11 kW Speed: max. 20,000 rpm Tool holder: HSK-F 63 Number of controlled axes: 5 MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Phases: 3 Fgodpfxj Ai Emhs Ah Eoi Operating hours: 12,371 h EQUIPMENT Drilling unit with 18 spindles Keyway cutter Liquid-cooled milling motor Tool changer with 16 positions Side tool changer with 8 positions PC control

Condition: ready for operation (used), DROOP & REIN SZ 100 / Keyway Milling Machine - Maximum machining diameter: 140 mm - Spindle bore: 40 mm - Keyway length in a single pass: 100 mm - Distance between chuck and tailstock center: 350 mm - 3 working speeds Fodpfszv Edqjx Ah Eogi - Electric chuck guard - Good overall condition, ready for operation Dimensions: L x W x H 0.9 x 0.6 x 1.5 meters / Weight: 300 kg Subject to errors and omissions.

Condition: good (used), functionality: fully functional, Year of construction: 1992, Vertical snowplow with 10 snowplow blades and numerous mounting points. Fjds Agn U Ajpfx Ah Eogi Drive system with a Stöber gearbox, providing infinitely variable speed control.

Condition: good (used), Year of construction: 1971, machine/vehicle number: 170119003210A0, Offer 25217 Technical data: - Groove width: 3 to 36 mm - Max. groove length: 340 mm Fedewu Suvopfx Ah Eogi - Bore diameter: 10 to 350 mm - Feed rate: 0.01 - 0.22 mm - Cutting speed: 2 - 10 m/min - Return speed: 20 m/min - Max. pulling force: 1.5 t - Max. workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as shown

Condition: excellent (used), Year of construction: 1991, Keyway broaching machine Elmass, suitable for keyways up to 14 mm wide. Maximum working stroke 200 mm. Thanks to the bore-guided tool, this Elmass system can also be used to broach extra-long keyways. Fgedpfx Ajld S S Soh Esi Tools for standard bores with diameters of 6-50 mm and keyway widths of 2-14 mm are available. This tool system is also suitable for blind hole drilling. Thanks to the 400 mm rotary table, multiple keyways can also be broached.

Condition: excellent (used), Type: U3E1000 Fgodpfx Ajzvq Axeh Eoi Machine no.: 17098 Year of manufacture: 1982 Data: Engine power: 3 kW Pull length: 1000 mm Dimensions, W x D x H approx.: 900 x 700 x 1600 mm Weight (estimated): 300 kg ... 3 clearing needles

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1972, operating hours: 24 h, machine/vehicle number: 2025, overall weight: 5,200 kg, power: 10 kW (13.60 HP), input voltage: 380 V, input frequency: 50 Hz, broaching length: 320 mm, workpiece diameter (max.): 630 mm, total length: 2,650 mm, total width: 1,810 mm, total height: 2,890 mm, Slotting Machine STANKO 7M430 The STANKO model 7M430 is a heavy-duty vertical slotting machine, designed for machining internal keyways, slots, internal splines, and profiled surfaces in large and heavy workpieces. Manufactured in 1972, this machine is intended for industrial applications requiring robust construction, high rigidity, and reliable operation. The machine is equipped with a rotary worktable with a diameter of 630 mm, allowing flexible positioning of workpieces. The maximum stroke length of the ram is 320 mm (minimum stroke 120 mm), providing a wide working range for various slotting operations. The slotting head can be swivelled ±10°, enabling angular machining and increased versatility. Feeds along the X- and Y-axes are adjustable in the range of 0.2 to 2.4 mm per double stroke, while the rotary feed of the table can be set from 0.1 to 1.4°, ensuring precise control of cutting parameters. The maximum permissible table load is 3000 kg, making the machine suitable for large and heavy components. The distance from the table surface to the chisel guides is 500 mm, and the machine offers generous table travels: 650 mm longitudinal, 500 mm transverse, with 360° table rotation. The drive motor has a power rating of 10 kW, providing sufficient cutting force for demanding machining tasks. With overall dimensions of approximately 2650 × 1810 × 2890 mm and a total weight of about 5200 kg, the STANKO 7M430 features a rigid cast-iron construction that ensures excellent vibration damping and long-term stability. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 24 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Fodpfx Ajx U Tr Aoh Esgi Typical applications: *Slotting of internal keyways *Machining of internal splines *Profile machining of internal surfaces *Machining of large and heavy components *General mechanical engineering and repair work

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment Fedjznn Hrspfx Ah Esgi - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: used, Hydraulic workshop press, keyway milling press, groove milling press Hydraulic workshop press, custom-built, MaVo type 5t-20 Used for milling keyway grooves in through-holes. Pressing force: 5 tons (at 100 bar hydraulic pressure) Stand width: 770 mm Cylinder stroke: 220 mm Distance from threaded piston rod to table traverse: max. 900 mm Pressing speed, ram downwards: approx. 11.5 mm/sec. = 220 mm in 19 sec. Fgodpfewki Apox Ah Eoi Pressing speed, ram upwards: approx. 24.5 mm/sec. = 220 mm in 9 sec. Motor power: 5.5 kW Mains connection: 400 volts, 50 Hz - 2-hand control (one button for pump on, 1 button for downwards, 1 button for upwards) - Hydraulic pump HAWE, type K5/3 (can also deliver 400 bar, but the pump is very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm length - 2 support plates - Very stable steel construction made of 140 series double T-beams - Estimated load-bearing capacity of the steel construction: 40 tons or more - Can be moved with a pallet truck Space requirement L x W x H: 1200 x 930 x 2280 mm Weight: 485 kg

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Year of manufacture: 1987 Maximum torque: 65000 Nm Gear ratio: 200:1 Actual gear ratio: 200.364 Power: n1 950 rpm = 33 kW n1 710 rpm = 24.6 kW Dimensions: Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Oil capacity: 68 kg The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation. Fgedszw H Hiopfx Ah Esi

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, feed length X-axis: 2,500 mm, feed length Z-axis: 3,200 mm, workpiece weight (max.): 25,000 kg, travel distance X-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 51,000 W, chuck outer diameter: 2,500 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 1,500 rpm, turning diameter: 3,000 mm, total height: 3,000 mm, type of input current: three-phase, turning height: 3,200 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 150 rpm, torque: 452 Nm, overall weight: 40,000 kg, year of last overhaul: 2022, Machine was overhauled in 2022 with new spindle servo motor and control unit The machine is under power and can be checked in our workshop Details are as below. Fagor 8055i-TC-4 Cnc Kontrol Ünitesi ii) 512 Mb Harddisk Fedpozl H Ipofx Ah Esgi iii) Look Ahead (200 Blok Önden Okuma) iv) USB ve RS232 Haberleşme Protokolleri v) Türkçe Kullanım Paneli, vi) Türkçe Alarm Listesi vii) Parametrik Programlama Özelliği viii) 12 Dil Kullanım Seçeneği ix) Manual yada Otomatik Takım Kalibrasyon x) Vidalı Mil Telafisi (Ballscrew Compensation ) xi) Kontrol Üzerinde Ballbar Testi ve Osilascop Özelliği xii) 4 Eksen Motor & Sürücü Kontrol Kabiliyeti xiii) Uzatmalı standart El çarkı (3 M) xiv) 3 Eksen Fagor Servo Motor & Sürücüleri Spindle Servomotor, Power (S1/S6) 51/71 kW, Nom. Torque (S1) = 325 Nm, Max Torque 1 FM7-A510-C3B1-E01 (S6) = 452 Nm, 1500 / 5000 rpm Integrated C AXIS Encoder, Foot Mounting,, Keyway, Protection Degree IP44, ")

Condition: new, “Partially unpacked for photography – unused item from a warehouse clearance.” EKS key interlock USB (ST01) 92750 Fsdezlt Euspfx Ah Eogi EUCHNER

Condition: used, Year of construction: 1966, Max. pulling force: 5 t, max. stroke: 850 mm, max. cutting speed: 12 m/min, max. return speed: 25 m/min, clamping area: 410 x 575 mm, groove width: 3 - 90 mm, drilling diameter: 13 - 500 mm, workpiece weight: 6000 kg, depth of the machine base below floor level: 1,400 mm. Fedpfscm Elnex Ah Eegi

Condition: excellent (used), SECO Minimaster holder MM 12-20 150.4 (28657) Slot milling cutter in case with 4 inserts MM 12-12008 RO8 P 40 Fgsdpfjw Iczxjx Ah Eei

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,928 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 276 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 755 mm, spindle motor power: 25,500 W, overall weight: 6,250 kg, controller manufacturer: SIEMENS, controller model: 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 6, This 6-axis DMG MORI CLX 450 V6 was manufactured in 2021. It features a maximum turning diameter of 400 mm, X-axis travel of 276 mm, Y-axis travel of ±60 mm, and Z-axis travel of 755 mm. The machine is equipped with a 12-position VDI 40 turret and a powerful spindle with a maximum speed of 4,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CLX 450 V6 machine we have for sale. Contact us for further details. Fgedpfx Aoz Inlxsh Eei • Control: Siemens 840D with ShopTurn • HMI: DMG MORI SLIMline Multi-Touch, 19" touchscreen • Spindle operating hours: approx. 2,928 hWorking capacity and axes • Axes: X, Y, Z; C-axis on main and counter spindle • Max turning diameter: 400 mm • Swing over bed: 700 mm • Swing over cross slide: 370 mm • Rapid traverse: X/Z 30 m/min; Y 22.5 m/minMain spindle • Spindle nose: A2-8 • Bar capacity: 80 mm • Power: 25.5 kW (40% ED) / 17 kW (S1) • Torque: 426 Nm (40% ED) / 283 Nm (S1) • Differential clamping pressure functionCounter spindle • Max speed: 5,000 rpm • Spindle nose: A2-6 • Power: 14 kW (40% ED) / 13 kW (S1) • Torque: 192 Nm (40% ED) / 171.5 Nm (S1) • Differential clamping pressure function • Internal chuck flushing • Auxiliary tailstock functionTool turret and driven tools • 12-position VDI 40 turret with 6 additional BT stations • Driven tools: up to 4,000 rpm • Driven-tool power/torque: 5.44 kW (40% ED) / 20 Nm (40% ED)Equipment/options (machine-integrated) • Setup package: 12-bar coolant supply system; 5-bar coolant washdown gun • Safe clamping package • Connectivity: DMG MORI IoTconnector; DMG MORI Messenger V4 • Siemens software options: Multi Threading 2.0; Variable spindle speed; Y-axis parting cycle; Keyway Broaching cycleElectrical data • Supply voltage: 400 V ±10%, 50 Hz • Phases: L1, L2, L3, N, PE • Connected load: 39 kVA • Max rated current: 56 A Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2007, Yeo Sheng Machinery TSH-TUVB-1010 Keyway Broaching Machine Capacity: 10 Ton Includes various tools The machine is in good working condition. Location: Hamont-Achel, Belgium The seller is not liable for typographical or transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT. Fgedpfxex D Dihs Ah Esi

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, overall weight: 1,100 kg, total length: 1,359 mm, total width: 500 mm, total height: 650 mm, gear ratio: 160, torque: 32,000 Nm, shaft diameter: 160 mm, 1 piece, very little used industrial spur gear reducer for conveyor systems, cranes, and lifting drives. This gear reducer was installed on a freight train cable shunting system. However, this shunting system was never used. The gear reducer was stored dry in a winch house. A PDF data sheet is available here under the advertisement description! Manufacturer: Penig / ASUG GDR Type: TGL 34611 / 10A2-355x160 Rated power: P = 21.4 kW Torque: 32000 Nm Gear ratio: i = 160 Actual gear ratio: 152.230 Speed n1: 950 rpm Speed n2: 6.24 rpm Input shaft diameter: 35mm x 80mm Fedpfx Aszimqroh Ejgi Output shaft: Solid shaft Ø 160mm x 300mm The second part of the pin coupling is also available. The bore in this half is 125 mm. !! The pin coupling is not included in the stated selling price !! Dimensions: Length: l4 = 1359 mm Width: b1 = 500 mm without shaft Height: h4 = 650 mm Shaft height: h1 = 315 mm Weight: 1100 kg The gear reducer series includes two-, three-, and four-stage gear reducers with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing of a particular design size are the same for two-, three-, and four-stage versions. In the four-stage version, the drive shaft is located below the parting plane. The housing is generally made of cast iron. The gear reducers can be operated in both directions of rotation.

Condition: good (used), Year of construction: 1960, Straightening and keyway slotting machines, manufacturer CARL HURTH, type: P5V, year approx. 1960. Modernized in 2018 with two-hand control. Clamping length: 1250 mm with various support dies up to 50 mm diameter. 4 dial gauge holders. Ready for use. The machine can also be used for keyway slotting. Dimensions: width 1500 mm, depth 1300 mm, height 2400 mm, weight approx. 2000 kg. Fgedpfx Aey Rgk Roh Eei

Year of construction: 1989, condition: used, Manufacturer: Hönnema Model: KAT 63/1250 Year of manufacture: 1989 Fodpfxjlu D Hkj Ah Esgi General / technical data: CNC grooving machine with partial or rotary table for twist grooving. Max. stroke: 1250mm Cutting speed: stepless from 0 to 16m/min Max. Return speed: 16m/min Max. Groove width: 63mm Fully automatic twist dividing attachment: RA 450 AUDR Remark: The feed is made by stepping motor and ball screw through the machine table. The machine table has a stable and smooth-running linear guide. The machine is approx. 1.500mm under floor! The machine is under power in our warehouse and can be inspected.

Year of construction: 1965, condition: good (used), functionality: fully functional, machine/vehicle number: 2549, General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design Fjdpfxetuuvzs Ah Ejgi clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter - Tractive force display Accessories - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. The machine is available for inspection in our warehouse. The machine is new in our stock and is currently not technically or visually refurbished. Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: B5020D, Digima B5020D Slotting Machine Professional vertical slotting machine with a 460 mm rotary table, 3 kW power, and a stroke of up to 200 mm. The Digima B5020D is a robust metal slotting machine designed for precise machining of keyways, channels, shaped surfaces, and slotting operations on steel and cast iron components. The machine is designed for use in tool shops, production facilities, maintenance departments, and for both individual and serial production. Model B5020D offers a maximum slotting length of 200 mm, four slide stroke speeds of 32 / 50 / 80 / 125 strokes/min, a rotary table with a diameter of 460 mm, and a stable construction weighing 2200 kg. Technical specifications of the Digima B5020D slotting machine: Model - B5020 / B5020D Machine type - Metal slotting machine / vertical slotter Brand - Digima Manufacturer's code - B5020 Condition - New Supply voltage - 400 V Maximum power - 3000 W Main motor power - 3 kW Rapid feed motor power - 0.75 kW Maximum slotting length - 200 mm Number of slide strokes - 32 / 50 / 80 / 125 strokes/min Number of stroke speeds - 4 speed ranges Slide tilt range - 0–8° Working table diameter - 460 mm Vertical adjustment range of the slide block - 200 mm Distance from the face of the tool holder to the column - 480 mm Distance from the table surface to the lower part of the slide guide - 320 mm Maximum longitudinal table travel - 420 mm Maximum transverse table travel - 420 mm Maximum table rotation angle - 360° Table feed range - 0.054–1.24 mm/stroke Table rotary feed range - 0.035–0.805° Maximum size of the slotting tool - 25 × 40 mm Maximum slotting force - 5 kN Maximum table load - 400 kg Width of the keyway at the center of the table - 18 mm Net machine weight - 2200 kg Product weight with individual packaging - 2200 kg Packaging / transport dimensions - 1720 × 1220 × 1885 mm Packaging condition - Original Fodpfxjz Sp Hyo Ah Esgi

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) Fgedpfer A Hcbex Ah Eji - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 290 kg, power: 0.37 kW (0.50 HP), input voltage: 400 V, total length: 800 mm, total width: 750 mm, total height: 1,550 mm, feed length X-axis: 220 mm, feed length Y-axis: 220 mm, feed length Z-axis: 200 mm, grinding spindle motor power: 370 W, Special Offer – 5% Discount Available! Slotting Machine The Slotting Machine is a compact and reliable machine designed for precision slotting, keyway cutting, internal profiling and shaping operations. Its rigid construction and adjustable stroke make it an ideal solution for tool rooms, maintenance workshops and metalworking facilities. The machine features a rotating head with a 90° swivel, allowing greater flexibility when machining complex workpieces. With six selectable stroke speeds and a maximum stroke length of 125 mm, it delivers accurate and efficient machining for a wide range of applications. The robust construction ensures excellent stability and precision while maintaining low operating costs. The machine is suitable for both repair work and small-batch production. Main Features • Heavy-duty construction • Adjustable stroke • Six stroke speed settings • 90° swivelling head • High machining accuracy Fedpfoyux E Hjx Ah Eogi • Compact design • Easy operation • CE certified Technical Specifications • Maximum stroke: 125 mm • Stroke speed: 60–350 strokes/min • Number of speed steps: 6 • Head rotation: 90° • Table size: 500 × 200 mm • Table travel (X/Y): 220 mm • Z-axis travel: 200 mm • Motor power: 0.37 kW • Tool shank diameter: Ø10 / Ø16 mm • Machine dimensions: 800 × 750 × 1550 mm • Machine weight: 290 kg Applications • Slotting • Keyway machining • Internal profiling • Shaping operations • Tool rooms • Maintenance workshops • Metalworking • Small-batch production Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: ready for operation (used), Keyway cutting machine FRÖMAG RAPIDA 463 incl. INDEXING TABLE - Machinable keyway width: 3 - 63mm - Maximum keyway length: 600mm - INDEXING TABLE - For bores from 10 - 500mm - Feed rate: 0.01 - 0.25mm - Cutting speed, infinitely adjustable: 2 - 22 meters/min - Return speed / constant: 50 meters/min - Load capacity max. 3000 kg - Connection power: 4.6 kW - Includes work platform - Various keyway cutters / accessories & tool cabinet Dimensions: L x W x H 1.6 x 1.5 x 2.3 meters / Weight 3500 kg Fgsdpfx Aszl Aiijh Esi Errors and omissions excepted.

Condition: used, functionality: fully functional, Various used rack cutters / rack group cutters from different manufacturers Our asking prices for the cutters are net, ex works, plus packaging costs, starting from €170. Individual prices: Manufacturer: Arnold Dold GmbH & Co.KG Module 0.5 - Group cutter - Asking price: €340 Module 0.9 - TIN coating - Asking price: €485 Module 1.2 - Available - Group cutter - Asking price: €350 Module 1.25 - Group cutter - Asking price: €370 Module 1.5 - TIN coating - Asking price: €675 Module 1.75 - Group cutter - Asking price: €655 Module 2 - 4 grooves - one damaged area - 1.89 kg - Asking price: €180 Module 2 - TIN coating - Asking price: €690 Module 2.5 - 8 grooves - one damaged area - 13.52 kg - Asking price: €430 Module 3 - one damaged area - 13.29 - Asking price: €205 Module 3 - 7 grooves - re-ground - 13.77 kg - Asking price: €180 Module 3 - 3 grooves - Asking price: €260 Module 3 - TIN coating - Asking price: €470 Module 5 - 4 grooves - re-ground - 12.15 kg - Asking price: €150 Module 5 - 4 grooves - TIN coating - Asking price: €675 Module 6 - 3 grooves - TIN coating - Asking price: €760 Module 6 - 3 grooves - TIN coating - re-ground - 11.16 kg - Asking price: €360 Module 7 - 3 grooves - re-ground - 11.41 kg - Asking price: €390 Module 8 - 3 grooves - re-ground - 5.28 - Asking price: €170 Module 8 - re-ground - Asking price: €405 Fedpfx Ahsytrh Eo Ejgi Module 8 - TIN coating - Asking price: €700 Module 10 - TIN coating - Asking price: €690 Module 10 - re-ground - finished cutter - 0.515 kg - Asking price: €285 Module 12 - 2 pieces - TIN coating - finished cutter - Asking price: €520 Module 13 - finished cutter - Asking price: €370 Module 14 - re-ground - 5.18 kg - Asking price: €210 Module 16 - Asking price: €540 Module 16 - re-ground - 5.14 kg - Asking price: €270 Involute angle: 20° BPII - U Bore diameter [mm]: 40; 50; Keyway [mm]: 10: 12 Width [mm]: 32.5; 45.5; 44; 17/21; 16/20; 14/18; 21/25; 18/22; 65/73; 48/57; 31; 66/72; 69/77; 70/78; 60/64; 60/66; 82; 72/80; 82; 40; 39; 47; 52; 56; 64 Outer diameter [mm]: 169; 140; 141; 200; 150; 198; 195; 199; 197; 201; 200; 219; 192; 191 Manufacturer: Saazor - Wälztechnik ZORN GmbH & Co. KG Module 1 - 16 grooves - TIN coating - one damaged area - 10.18 kg - Asking price: €460 Module 1 - 16 grooves - TIN coating - Asking price: €530 Module 1.5 - 9 grooves - group cutter - 9 grooves - Asking price: €505 Module 2 - hob cutter - Asking price: €350 Module 6 - hob cutter - Asking price: €575 Module 10 - TIN coating - Asking price: €315 Involute angle: 20° DIN 3972 II - U or DIN 3972 II Class A - U Bore diameter [mm]: 40 Keyway [mm]: 10 Width [mm]: 52/60; 55/85; 60/90; 33/40 Outer diameter [mm]: 176; 200; 198; 199 Manufacturer: Klingelnberg Module 2.5 - Asking price: €325 Module 2.75 - Asking price: €340 Module 3.25 - Asking price: €150 Module 3.75 - Asking price: €180 Module 4.5 - Asking price: €195 Involute angle: 20° Bore diameter [mm]: 40 Keyway [mm]: 10 Width [mm]: 30/38; 28/36; 35/42; 39/47; 44/52 Outer diameter [mm]: 148; 149; 150 Accessories for milling machines, Involute angle 20°, module cutters, gear cutters, cutters, hob cutters, manufacturing of racks, grooved = profile grooves - profile rows The cutters were used in our production and can be re-sharpened. All technical specifications are subject to printing and typographical errors. Sale exclusively in EU countries only.