Used beverage production for sale (1,137)

Condition: used, Year of construction: 2003, Overview This PALL Microflow filtration system is designed for the crossflow filtration of beer, enabling continuous and fully automated clarification processes. The system is configured as a tandem installation with a capacity of up to 50 hl/h, suitable for medium to high-capacity brewery operations. It operates with membrane filtration modules, allowing gentle product handling and stable filtration performance. The unit includes pumps, integrated CIP system, and Siemens-based automation, ensuring a high degree of process control and hygiene. Technical Specs  - Capacity: approx. 50 hl/h (tandem system, 24h operation) - Filtration type: Crossflow (microfiltration) - Number of modules: 48 - Operating temperature range: 0°C to 70°C - Equipment: Pumps, integrated CIP system, complete piping, control system - Control system: Siemens S7 with Siemens OP07 HMI - Automation level: Fully automatic Equipment  - Filtration modules (48 units) - Product pumps - Integrated CIP system Bwjdpfxoy Etcps Aknjw - Complete piping system

Condition: used, machine/vehicle number: LC594, Used Sidel Alsim PET bottling line for carbonated water and drinks - 14.000 bphTechnical Specifications & Performance DataThis complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations.Production speed: 13,000–14,000 bottles per hourContainers: PET bottles, neck finish 28 1881Blow molder: Sidel SBO10, 10 cavities, neck finish: 28 1881Preform handling: Sidel EBH 2050 preform hopperAir conveyor: Sidel-AlsimRinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10KRinser: 48 clamps, 1 water treatmentFiller: 60 isobaric valvesCapper: 10 headsPremix/Mixer: Sidel-Alsim, 30 m³/h outputBottle dryer: ACILabeling machine: Krones Contiroll, rotary, 15 dishes, PET wrap-around, roll-fedShrink wrapper: Acmi Fenix, film-only configurationHandle applicator: Smipack HA 35-50-70Palletizer: Alsim Valiant 1I 1P, fully automatic, push-typePallet wrapper: PM Pragometal OBS Rotomatic StandardAdvanced Automation & Control SystemsThe line integrates component HMIs and automatic control features at each station to streamline operation and changeovers. The isobaric filling block ensures precise filling for carbonated beverages, while the roll-fed rotary labeling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format components help maintain uptime and reduce setup times in beverage production environments.Production Line Integration CapabilitiesDesigned for inline operation from preform loading through palletizing, the system features smooth bottle transfer via air conveyors and synchronized starwheels in the filling monoblock. It integrates upstream blowing with downstream labeling, shrink wrapping, handle application, and palletizing, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights associated with the 28 1881 neck finish.Machine Condition & Maintenance HistoryThis second hand line is available for sale and is presented in ready-for-operation condition. Component years range from 1996 to 2019, reflecting a well-curated selection of bottling equipment. Buyers can arrange inspection to assess performance, equipment condition, and overall line integration prior to deployment in beverage production.Operational Performance & VersatilityOptimized for carbonated products, the isobaric filler provides accurate CO₂ retention and foam control. The Sidel blow molder delivers stable bottle quality, while the Krones Contiroll rotary labeler ensures precise PET w... Bwjdpsydn A Hjfx Aknow

Condition: used, Year of construction: 2019, This empty crate inspection system was built in 2019 by the German manufacturer Indspect. The machine is until October 2025 in running production. Bsdpfxsyhmzpe Akneww Technical data - Capacity: Adjustable - For the inspection of damage empty crates

Condition: used, Year of construction: 2022, Overview Bodsym D R Eopfx Akneww This Gravity Filler for Cans was manufactured in 2022 by Italian company Emma. The machine has never been used and is immediately available. It is designed for small-scale can filling, particularly suited for 15 cl and 25 cl slim cans, with manual loading and a production speed of up to approx. 600 cans per hour. Technical data - Capacity: approx. 600 cans/h - Formats: 15 cl slim, 25 cl slim - Dimensions: L.1480 mm x W.850 mm x H.1800 mm (max. 3000 mm) - Weight: 350 kg - Power: 0.8 kW - Air consumption: 190 Nl/min - Operating pressure: 6 bar, dry and non-lubricated air - Voltage: 220 V (Single-phase) - Frequency: 50 Hz - Auxiliary voltage: 24 V DC - Ambient temperature: 2 °C to 40 °C

Condition: used, Year of construction: 2015, Overview  This tank package was manufactured between 2015 and 2025 by Spanish manufacturers Inox GC and Magusa, as well as German company Linde AG. It includes multiple isobaric and atmospheric fermenters, an electric lifter and a hop torpedo for pressure dry hopping. Technical data & Scope of Delivery  - Isobaric Fermenter (Unit 1) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket - Isobaric Fermenter (Unit 2) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket - Isobaric Fermenter (Unit 3) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Bwedpjyb S Dvofx Aknjw - Isobaric Fermenter | Inox GC | — | 2019 | 2,000 L; cylindro-conical; isobaric; dual glycol jacket - Isobaric Fermenter | Inox GC | — | 2021 | 3,000 L; cylindro-conical; isobaric; dual-wall cooling - Isobaric Fermenter | Inox GC | — | 2024 | 4,800 L; cylindro-conical; isobaric; Double jacket for glycol circulation; carbonation stone in the cone - Atmospheric Fermenter (Unit 1) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket - Atmospheric Fermenter (Unit 2) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket - Electric Lifter | Linde AG | L14 | — | Electric; 1,400–1,700 kg load capacity - Isobaric Hop Torpedo | Inox GC | — | 2025 | Approx. 50 L; vertical isobaric dry hopping vessel; new

Condition: used, Year of construction: 2004, Used filling monoblock CUSTOM ALPHA 32 32 8 11000 BPH The Used filling monoblock Costum Alpha 32-32-8 bottles carbonated beverages and water both still and sparkling in PET containers using an isobaric process. Custom manufactured this model in 2004 consequently it reaches a production capacity of 11000 bottles per hour for the 0.25 L format with reduced speeds for larger formats. Main Technical Features The Used filling monoblock CUSTOM ALPHA 32 32 8 11000 BPH operates with a clockwise rotation system and integrates three main operational sections rinsing filling and capping. Therefore it ensures a smooth production process. Rinsing Section of the Used filling monoblock Costum Alpha 32-32-8 The machine uses 32 grippers to handle bottles and applies a single treatment for internal container cleaning before filling. By eliminating additional washing phases it optimizes efficiency and reduces process times. As a result production runs more efficiently. Filling Section The filler contains 32 isobaric filling valves with fixed nozzles that maintain a constant and controlled liquid flow. Additionally this system delivers high dosing precision and minimizes the risk of overfilling or product waste. In other words it ensures both accuracy and minimal loss. Capping Section in the Used filling monoblock Costum Alpha 32-32-8 The integrated capping system supports plastic screw caps and operates with 8 capping heads. Specifically it is designed for 1881 and 1810 neck types. Consequently the system included in the Used filling monoblock Costum Alpha 32-32-8 applies caps securely ensuring an airtight seal and protecting the bottled product. Moreover it enhances product safety. Formats and Productivity The Used filling monoblock Costum Alpha 32-32-8 processes bottles of various capacities adjusting productivity accordingly. For example it fills 11000 bottles per hour for the 0.25 L format while the speed decreases to 4900 bottles per hour for the 1.5 L format. Similarly intermediate formats such as 0.33 L and 0.50 L achieve proportional productivity levels. As a result it provides a flexible solution for different production needs. Electrical Data and Dimensions Bedpsv Ng Uhjfx Aknsww The machine operates at 380V 50Hz with a power consumption of 6 kW. Furthermore its dimensions are Width 3150 mm Length 4200 mm Height 2500 mm Safety and Lifecycle of the Used filling monoblock Costum Alpha 32-32-8 The Used filling monoblock Costum Alpha 32-32-8 includes safety devices that maintain compliance with current regulations. In addition these features enhance operational reliability. The machine will remain in operation until the end of 2026 thus allowing for several more years of use before requiring an upgrade or replacement. Given this longevity it represents a valuable investment. The machine provides a reliable technical solution for companies needing an efficient isobaric filling system. Furthermore it remains compatible with various PET bottle types and is suitable for medium scale production. As a final point its design ensures long term efficiency and performance.

Condition: used, Year of construction: 1999, Used filling monoblock SICMEA Cometa 12/5 4500 bph The used filling monoblock SICMEA Cometa 12/5 4500 bph provides a technical solution for filling oil into PET containers. Since Sicmea manufactured this model in 1999 , it ensures a production capacity of 4500 bottles per hour while designing it for packaging formats of 2 L and 5 L. Consequently, it remains a reliable option for industrial bottling lines. Technical features of the Used filling monoblock SICMEA The SICMEA Cometa 12/5 4500 bph uses a volumetric filling system, which ensures precise dosing regardless of the product’s viscosity. Additionally, the monoblock integrates 12 filling valves, and each valve features a fixed nozzle, which guarantees a uniform flow throughout the entire filling cycle. As a result, the machine provides good consistency. Moreover, the capping system handles plastic screw caps efficiently. The 12 capping heads operate in sync with the filling process, ensuring high production efficiency and a hermetic seal for the container. Furthermore, this setup minimizes product wastage while maintaining precision. The machine follows a clockwise operating cycle, thereby optimizing the arrangement of mechanical components to maintain continuous and uninterrupted operation. Similarly, its structural design enhances workflow efficiency. Bwjdpfxjv Nyzbs Aknjw Power supply and electrical data The SICMEA Cometa 12/5 4500 bph filling monoblock operates with a power supply of 380V, 5 kW, and 50 Hz. These parameters make it compatible with major industrial production lines. Consequently, it ensures operational stability and optimizes energy consumption. Additionally, its electrical system supports high-efficiency performance. Safety and compliance The system includes safety devices that protect the operator and ensure compliance with current regulations. In particular, mechanical guards and emergency stop sensors minimize the risk of accidents and maintain a safe working environment. Moreover, its safety mechanisms improve workplace efficiency while reducing downtime. Applications and compatibility The SICMEA Cometa 12/5 4500 bph efficiently fills oil into PET containers, ensuring a precise and reliable bottling process. In addition, its compatibility with 2 L and 5 L formats allows manufacturers to manage production flexibly and adapt to various market needs. As a result, businesses benefit from increased versatility. With a capacity of 4500 bottles per hour, this monoblock supports high-volume production. Furthermore, it allows easy integration into existing bottling lines. Since its design enhances automation, it streamlines production processes effectively. Conclusion of the Used filling monoblock SICMEA The used filling monoblock SICMEA Cometa 12/5 4500 bph delivers a technical solution for volumetric oil filling in PET containers. Thanks to its optimized design, robust structure, and fully automated configuration, it ensures high production performance. Additionally, the integrated safety systems and efficient operation make this monoblock a reliable option for companies that require a high-performance system that meets industrial standards. Ultimately, this machine represents an effective solution for large-scale oil bottling operations.  

Condition: used, Year of construction: 2010, Overview  This semi-automatic pouch filling machine was manufactured in 2010 by AIT. The machine is available for sale because it is no longer in use by the seller. It is suitable for filling liquids and semi-liquid products into Doypack bags with screw caps. Thanks to its simple and user-friendly interface, the AIT DOYPACK is ideal for small to medium production volumes. The machine is promptly available. Technical data Bwsdpfowiu Hkex Aknew - Capacity: Up to 600 bags/hour (depending on product viscosity and format) - Volume range: 0.5L – 3L - Pressure: min. 6 bar - Bag type: Doypack with screw cap - Filling principle: Gear pump with high-precision flowmeter - Operation: Semi-automatic (manual bag positioning, automatic filling and capping) - Frame: Stainless steel - Cleaning/Sterilization: Integrated cleaning and sterilization functions - Control panel: Touch screen Scope of Delivery  - AIT DOYPACK semi-automatic filling and capping machine - Integrated gear pump and flowmeter - Touch screen control panel

Condition: used, Year of construction: 2004, Overview  This low-pressure vacuum filler was manufactured in 2004 by MBF. The machine was in use until 2017 and was fully functional at the time of shutdown. It was replaced due to the increased demand for carbonated products, which required a different filling principle (counter-pressure). Since then, the machine has been stored dry and protected, with only minor dust present. It is promptly available for sale. Technical data  - Capacity: - 6,000 bph (1.0 l bottles) - 7,000 bph (0.75 l bottles) - Bottle diameter: 55–120 mm (via steplessly adjustable in/outfeed stars) Bwedowiu Nlspfx Aknjw - Bottle height: 150–370 mm - Number of filling valves: 36 - Filling principle: Low-pressure vacuum filling - Running direction: Left to right - Filling valve type: Electropneumatic - Special features: - Programmable bottle parameters with automatic adjustment for bottle height and fill level - Hot filling capable with auto shutdown at temperature deviation - Automatic speed adjustment based on bottle infeed - CO₂ pre-flushing of bottles - Inert gas overlay possible in the filler bowl - Auto fill level control depending on product temperature - Auto wine changeover via CIP tray - CIP dummy bottles and semi-automatic cleaning program - Remote maintenance modem - Complete documentation (spare parts list, wiring diagram) - Central electric fill level adjustment Scope of Delivery  - MBF Fillmatic 36LV Filler - CIP dummy bottles - CIP tray - Tele-Modem - Complete documentation (electrical and spare parts)

Condition: used, Year of construction: 2011, Overview This crate washer was manufactured by the German company Klotzki in 2011. It is designed for cleaning beverage crates and has been regularly serviced. The machine is immediately available and was last used in a beverage production plant. It shows regular signs of use, but is still in working condition. The operator platform is not included in the scope of delivery. Technical data  - Capacity: 1,500 – 2,500 crates/h (adjustable) - Treatment time per crate: ~91 sec at 1,700 crates/h, ~65 sec at 2,400 crates/h - Crates in machine: 48 pieces - Crate format: customizable - Running direction: transverse - Spray pressure: approx. 4.0 bar Bedjwu S Sujpfx Akneww - Lye tank volume: approx. 1.0 m³ - Treatment section length: approx. 34 meters - Main pump: 15 kW, 80 m³/h - Drive units: - Main drive: 0.33 kW - Crate infeed: 0.55 kW - Crate outfeed: 0.55 kW - Dimensions: - Length: 3,000 mm - Width: 2,000 mm - Height: approx. 5,000 mm - Crate infeed height: 1,100 mm - Crate outfeed height: 4,100 mm - Weight: approx. 1,500 kg - Water connections: - Cleaning water inlet: R 1 1/4” - Rinsing connection: R 3/4” - Construction: stainless steel (except drives) - Control system: LOGO controller - Electrical installation: per customer specification Scope of Delivery  - Spiral crate washer (upper unit) - Lower tank body

Condition: used, Used bottling line Cortellazzi for CSD in PET bottles – 8000 bph General overview of the line The used Cortellazzi bottling line for carbonated soft drinks in PET bottles 8000 bph delivers an integrated solution for producing soft drinks and sparkling water in 0.50 L and 1.5 L containers. Specifically designed for industrial environments, the system provides a complete technical configuration. It maximizes production efficiency and ensures operational safety by including protection devices and quality control systems at every stage. Moreover, the layout supports continuous operation with minimal downtime. Filling unit and blow molders The Cortellazzi Fintec VEGA 40.70.10 isobaric filling monoblock 1998 handles carbonated products while maintaining constant pressure during the filling process. As a result, the system preserves CO2 content and prevents product loss. Two separate blow molding machines feed the containers. A Sidel SBO8 from 1999 ensures continuous high efficiency production, while a Kosme KSB-4000 from 1998 serves as a backup or support unit. In addition, both machines allow quick format changes and stable operation under load. Bwodpfx Akjwukuzonjw Carbonator and CO2 management The Cortellazzi Kristal Mix 1998 controls carbonation and saturates the product with CO2. Consequently, the unit ensures consistency and stability throughout the filling phase. Notably, it also supports fine tuning of pressure and temperature parameters. Labeling and customization Three labeling systems carry out specific functions. The Kosme Ekstrahotmelt 12TS1E1 1998 applies labels using hot melt glue. Meanwhile, the KHS Carmichael 1995 handles traditional label application. Furthermore, the Esleeve ESM 3200M 2004 applies shrink sleeves to PET containers in various formats. Together, these machines offer flexible labeling solutions for different product lines. Quality control and heat tunnel The Krones Miho module 2008 inspects containers and labels, detecting any defects or irregularities. If necessary, the system can reject non compliant items without interrupting the production flow. Then, the Krones Shrinkmatt 3000 tunnel 2008 uses steam to shrink the sleeves uniformly onto the containers. In particular, this tunnel guarantees even heat distribution, preventing sleeve distortion. Secondary packaging The Dimac Bluestar F30 2007 wraps products into shrink film with speed and precision. As such, this unit optimizes grouping and prepares the packs for palletizing. Additionally, it minimizes material waste and ensures a clean wrap. Handle and cap application The Twin Pack MGE 1997 applies handles to the grouped bottles. Simultaneously, the Bortolin Kemo 1997 feeds caps consistently and ensures uninterrupted sealing of containers. This way, the two systems maintain rhythm and alignment on the line. End of line and automation The Keber Meg Arm palletizer 1998 arranges the finished packs onto pallets.

Condition: used, Year of construction: 2007, Overview  This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Bjdewhkhhspfx Akneww Technical data  - Capacity: 18,000 bottles per hour - Label positions: Full bottle sleeve or partial bottom sleeve - Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery  - CLEVER Machines GS 4001 sleeving unit - Shrink tunnel CLEVER Machines STJ 3

Condition: used, Year of construction: 1994, Overview This Solo Screw Capper was manufactured in 1994 by French company Zalkin. The machine was used to apply plastic caps on 75cl cider glass bottles with a capacity of up to 9,000 bottles per hour. It is immediately available as the production at the previous facility was stopped in 2022. The cap hopper pneumatic system is included. Technical data  - Capacity: up to 9,000 bph - Formats: 75cl cider glass bottles - Dimensions: L.220 cm x W.150 cm x H.320 cm Scope of Delivery  Bodewhkq Njpfx Aknoww - Zalkin CA6 Solo Screw Capper - Cap hopper with pneumatic system

Condition: used, Year of construction: 2006, Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Bwedpfswhkywox Aknjw Technical data  - Capacity: 9,000 – 12,000 bottles per hour - Formats: 75cl glass bottles (cider, champagne type) - Dimensions: L 200 cm × W 150 cm × H 250 cm - Application: Cone application (distributor, oven, spinner) Scope of Delivery  - Cone distributor - Cone oven - Cone spinner - Operator platforms

Condition: excellent (used), Year of construction: 2013, - Content: 68 + 7 HL - With vibrating beak - 3 side elevation of the hopper - Lifting frame, max. lift: 1000 mm - Max. discharge height: 2150 mm Bjdoq Uk Rlopfx Aknjww - Machine only very little used - In very good condition Dimensions : - Hopper length : 4740 mm - Width : 2200 mm - Dump height : 1440 mm

Condition: good (used), - Capacity : max. 3000 bph - With cork presence control, at the inlet - Cork dust blow-off on the bottle - With capsule applicator - With shrink head - Running direction: left - right - Machine completely overhauled - Machine in very good condition Bwodpfx Aeralrusknow

Condition: used, Year of construction: 1998, Overview  This all-copper brewhouse of type CBS-15 was manufactured by the German manufacturer Wachsmann in 1998 and first put into operation in 1999/2000. It is currently in storage in Bavaria and has recently been professionally overhauled - including new controls and motors. The system is available immediately. The brewhouse is being sold at a much more attractive price than previously invested. Originally, a recommissioning was planned as part of our own brewing project, but this could not be realized due to the lack of a building permit. Bsdpfow Afhfsx Aknsww Technical details  - Design: all-copper brewhouse incl. copper-clad smoke pipe and dummy extractor hood - Hot wort: 17 hl - Pouring: approx. 270 kg - Commissioning: 1999/2000 - Floor space: approx. 5.25 × 1.80 m (with control cabinet: 2.25 m) - Recommended room height: min. 4.2 m - Weight (empty): approx. 4,000 kg - Control system: renewed after 2017

Condition: used, machine/vehicle number: LC579, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. Bwjdpjw Imp Hefx Aknew A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is elect...

Condition: used, Year of construction: 2009, Overview The labeller was built in 2009 by Italian manufacturer PE Labellers. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Techn. Details - Capacity: 12.000 bph - Adapted for: 1.0L and 1.5L - Working sense: entry left – exit right (counter-clockwise) - Number of labelling heads: 12 - Label position: wrap-around  - Label material: OPP with hot melt - Machine drive: Siemens S7 Bodpfx Asw En Utjknjww - Bottles processed & format tools incl.: 0.25L – 0.50L – 1.0L

Condition: used, Year of construction: 2024, Warehouse Service  for Used Machines  Our storage service extends greater flexibility for both buyers and sellers seeking to purchase or sell used beverage machines. With access to our dedicated warehouse, sellers can improve their resale value by extending the selling cycles, while buyers can take advantage of temporary storage options to better coordinate their used machinery purchases with their delivery requirements. For Sellers  Get your machines out on time and still maximize your resale value: We store your machine as long as it takes to get the best resale value for your asset. Store-And-Sell Option Avoid scrapping Maximize resale values For Buyers  Secure your machine and plan your project with no time pressure: We store your machine as long as you need to set-up your project and be ready for assembly. Buy-And-Store Option Secure purchase opportunities Increase logistics efficiency Our Expertise Our services cover everything from pre-storage to post-storage operations. Prior to storing your machines, we take care of professional dismantling, documentation, transportation, unloading, and installation. Once in storage, we offer cleaning, maintenance, machine adaptation, spare parts exchange, and machine presentations based on project requirements. When it is time for stored machines to leave our facilities, we provide fullservice logistics to ensure a seamless transition, from taking them out of storage to transport and re-installation at new production sites. The facility located in Bippen, Germany offers the different features to best serve your needs: Open space, closed roof (open and closed sidewalls) and heated premises.    Get in touch with us:  Bwedpfx Akou Ax Abonjw

Condition: used, Year of construction: 2005, Overview  This cold glue labelling machine was manufactured in 2005 by German company HEUFT. The machine is no longer in production use and is now available for sale. It includes two integrated laser coders for date marking and supports a wide range of bottle formats. Ideal for high-speed beverage production environments. Technical data  - Capacity: Up to 60,000 bottles per hour - Formats: Supports 11 bottle formats Bwsdpfx Aswd Uk Seknjw - From 0,3l - 0,66l - Steini, NRW, Longneck - Container types: Glass, not transparent, non-contoured - Container diameter: 60.4 – 69.1 mm - Container height: 174 – 270 mm - Label positions: - Front (up to 2 labels) - Back (up to 1 label) - Label size range: - Width: 70 – 111 mm - Height: 33 – 100 mm - Band height: 1100 mm - Max. ambient temperature: 40°C - Power connection: 400 V - Machine design: Straight version, size L (approx. 3360 mm wide) - Bottle carousel diameter: 1610 mm - Number of bottle plates: 42 - Bottle rotation in carousel: Mechanical - Guide star diameter: 690 mm - Labelling stations: - 2 x Cold glue labelling stations - 8 glue pallets - 9 gripper positions - Automatic magazine feeding Scope of Delivery  - 1 x Labelling Machine | HEUFT | TORNADO | 2005 - Including: - 2 x Integrated Laser Coders | Bluhm - Complete labelling setup with format parts for 11 bottle formats - Cold glue stations, glue pallets, gripper arms, and automatic magazine - Technical documentation

Condition: used, Year of construction: 2017, Overview  This brewhouse was manufactured in 2017 by a Finnish company. It is a manually operated 3-vessel system with 1,000-liter capacity, consisting of hot water tank, boiling vessel, and mashing vessel. The equipment is stored in a separate warehouse and available immediately. A viewing can be arranged upon request. Technical data  Bjdpfowfqyxsx Aknsww - Capacity: 1,000 liters per batch - Number of vessels: 3 - Automation level: Manual operation Scope of Delivery  - Hot water tank - Boiling vessel - Mashing vessel - Accessories for connection

Condition: used, Year of construction: 2020, Overview These fermentation tanks were manufactured in 2020 by the German company Speidel. They are CE-certified, equipped with a cooling jacket, and rated for up to 2.5 bar pressure. The tanks are in good condition and available immediately. Bodpfx Aowfq Dkeknsww Technical data  - Capacity: 2 × 1,250 liters - Pressure rating: 2.5 bar - Cooling jacket: Yes - Certification: CE Scope of Delivery  - 2x 1,250-liter fermentation tanks  

Condition: used, Year of construction: 2004, Overview  This cold glue labelling machine was manufactured in 2004 by German company KHS. The machine was running until January 2025 and is now stored in the company. The labeller has a camera system for the orientation of the labels in the neck area for swing-top glass bottles. Technical data  - Capacity: Up to 26,000 bottles per hour - Working direction: anticlockwise - Formats: - 330 ml Longneck glass bottles - 330 ml Steinie glass bottles - 330 ml Swing-top glass bottles - 500 ml NRW glass bottles - Label positions: - Front (up to 2 labels) - Back (up to 1 label) - With a Siemens S7 control Bwedpfewhwwvjx Aknsw - New HMI touch panel in 2019

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 Bwodpjwh U Avsfx Aknew - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel