Beer tank buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
2

Beer transport tank Gebo / Belgien 41 Hl

BGM Dr. Altman Straße 27, 92431 Neunburg, DEGermany
6840 km
1988
good (used)
Beer transport tank Content 41 Hl 3,5 bar Vertical Inox Bb0omlhcte With trailer more
1
M8y3r Capacity: 143 hl Pressure: 4,3 bar Location / Position: vertical accessories: Fittings No.: 201189 more
5

Beer tank 181 T

Europa - DanmarkDenmark dealership location
6263 km
used
A-3570-Beer Tank 181T 2qhqla Stainless steel vertical tank for beer. Equipped with jacket! Conical bottom. AISI304, Capacity 181.000 L Dia. Ø 4200 mm H 15.400 mm more
1
Kat. No. 09-1049-3 standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 “ AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,950 mms of weight: 126 kg surcharge / piece: fermentation connector DN 50 35 euros fermentation lock 129 euros B208f sample valve 58 euros CIP cleaning 189 euros blind cap DN 50 13 euros temperature controll unit 58 euros The pric... more
2

Beer transport tank Unbekannt 30 Hl

BGM Dr. Altman Straße 27, 92431 Neunburg, DEGermany
6840 km
1988
good (used)
Beer transport tank Content 30 Hl Ftkrrfox 3,5 bar Vertical Inox Without trailer more
3
Capacity: 347 hl Pressure: 2,8 bar Location / Position: vertical Basic construction: torospherical head Bavhj2pk0r accessories: Available armatures: 3 pneumat. valves with pressure regulator more
6

STANKO 3KTC 1580 L

BabberichNetherlands dealership location
6320 km
used
Bb7kpzt2qg more
5

Center Lathe STANKO 16 K 20

Bünde/BielefeldGermany dealership location
6460 km
1983
used
turning diameter over bed 430 mm turning diameter over slide rest 220 mm turning length 710 mm centre height 220 mm spindle bore 52 mm spindle turning speed range 12,5 - 1600 U/min total power requirement 10 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,50 x 1,19 x 1,5 m Condition: ready for operation Electric 380 Volt Cooling equipment Machinelight 3 jaw chuck 310 mm carriage-rapid traverse Rapid transfer steel-holder 2im2jzmnn Applicatiopns for rapid transfe... more
2
Small radial drilling machine Manufacturer Stankoimport Type 2M53Y Built in 1981 Tool holder MK4 Speeds from 35.5 to 1,400 rpm in 8 steps Number 6 feeds, maximum feed force 800kp Maximum drilling capacity in steel mm 35 mm RADIUS max 1.000mm RADIUS min. 290mm Maximum distance between spindle end face and base plate 1,120 mm Maximum distance between spindle end face of table 630 mm Column diameter 250 mm Of the machine foot width 800 mm 1,850 mm length of the machine 2,430 mm heigh... more


beer tank
every day

New machines via email!

Be informed!
2
bore capacity in steel (diameter) 25 mm arm length 300 / 800 mm workpiece height max. 1000 mm distance table - lower edge spindle 125 / 1000 mm spindle turning speed range 63 - 1600 U/min feeds 0,125 - 0,2 - 0,315 mm/U max. torque on the spindle max. 90 Nm column diameter 180 mm spindle taper MT 3 quill stroke 250 mm base plate surface area 800 x 630 mm 3cw2jjlkw crossrail adjustment vertical 625 mm bore head horizontal movement 500 mm boring head swiweling right/left 90 ° total power requirem... more
5
tank system for Diesel / heating oil 2,000 litres Yrehcs tank drip pan CHEMO - year of construction 2008 barrel pump Horn with counter and nozzle performance of pump system 55 litres / minute electrical data 220 V space requirements length - 2,800 x depth - 880 x height - 2,300 mm weight approx. 420 kg more
6

Stanko 7A430

BabberichNetherlands dealership location
6320 km
1980
used
Bb33erp73b more
4
table length: 500 mm table width: 200 mm weight of the machine approx.: 52 kg Dimensions (HxWxD): 500x210x280 mm Angular Table (Sinus Table) for a vertical installation on a Milling Machine Lqzlp - table 500x200mm - inclinable right + left with 45° - tiltable front and rear 30° - rotatable to left and right 20° - without displayed T-slote plate!!!(underneath on the pictures!!!) - T-slots 4 pcs 14 mm width - installation clamping area: 270x170mm - clamping distance vertical 100mm - clamping dis... more
13
Spare parts for Tischbohrwerk VO / Stankoimport / Gertner, Fuhrmeister & CO E.g. complete spindle SK50 Ball screw spindles from the three axes Electric motors, 3 x feed motor, spindle motor complete control Siemens or control cabinet Control Panel with digital device 38butvlka Glass scales Detachable faceplate diameter 360 mm Radial movement of the faceplate-support 100 mm Converter / transformer Angle drilling head Dividing head Spindle diameter ø 110 mm tool holder ISO 50 ... more
2
spindle diameter 125 mm x-travel 1600 mm y-travel 1400 mm z-travel 1600 mm table-size 1800 x 1600 mm spindle taper MT 6 drilling depth in one stroke 1000 mm quill stroke 1000 mm turning speed range - spindle 8 - 1250 U/min turning speed range - facing chuck 5 - 315 U/min feeds longditudinal/cross/vertical 1 - 800 mm/min table rotating 360 ° indexing 0,5 ° distance table - spindle center 50 - 1350 mm radial face slide feeds: 1 - 800 mm/min facing chuck dia. 800 mm spindle motor 17 kW Up2qyq9oo ... more
6
max. wheel diameter 500 mm gear width 3.000 mm max. module 10 Bboy7kh2j9 min. wheel diameter 50 mm hobbing length 2.500 mm workpiece length - max. 3.000 mm [...] angle 45 ° workpiece weight 4000 kg faceplate diameter 560 mm height of centering tips over bed 450 mm number of teeth 25-250 hob dia. - max. 250 mm hob length - max. 300 mm axis distance between cutter and workpiece - min. 60 mm axis distance between cutter and workpiece - max. 385 mm weight of the machine ca. 28 t dimensions of the... more
6

Center Lathe STANKO 165

OstwestfalenGermany dealership location
6460 km
1974
used
turning diameter over bed 1100 mm turning diameter over slide rest 600 mm turning length 5000 mm centre height 500 mm spindle bore 80 mm spindle turning speed range 24 / 5 - 500 U/min longitudinal feeds: 0,20 - 3,05 mm/U face feeds 0,07 - 1,04 mm/U tailstock taper ISO 50 workpiece weight max. 5 t total power requirement 22 kW weight of the machine ca. 15,7 t dimensions of the machine ca. 8,2 x 2 x 1,76 m Condition: ready for operation Electric 400 Volt 3 jaw chuck Forkardt F 500 Mvkpl M... more
4
grinding length: 450 mm grinding diameter: 200 mm workpiece height: 220 mm spindle speed max.: 6300 U/min grinding wheel diameter: 200 mm grinding head vertical adjustable: 220 mm grinding spindle - swivable: 306 ° table surface area: 240x1000 mm table adjustment: schräg 7° re/li ° table travel longitudinal: 450 mm table travel cross: 260 mm total power requirement: 1,14 kW weight of the machine ca.: ca. 1,5 t space requirements of the machine approx.: T:1,5xB:1,6xH:1,5 m transport measurements ... more
5
faceplate diameter:2240 mm swing diameter:2500 mm turning height:1600 mm slides vertical travel:1200 mm workpiece weight:16 t C2ljnkm88 horizontal adjustment:1390 mm angle adjustable from - to:+ - 30 Grad faceplate turning speed range:1,6 - 80 U/min main drive motor:65 kW total power requirement:70 kW weight of the machine ca.:36 t dimensions of the machine ca.:5,4 x 5,1 x 5,0 m In 2008 complete overhauled with new electric with two vertical RAM´s 4-axes digital readout HEIDENHAIN 2 gear ste... more
6
max. workpiece diameter 500 mm Xwidgba threading length 3000 mm max. module 20 / 25 min. module - max. wheel diameter 500 mm min. wheel diameter 50 mm hobbing length 2800 mm number of teeth 6 - 200 milling cutter diameter 250 mm cutter length max. 300 mm milling head speed 10 - 103 U/min feeds axial 0,2 - 575 mm/min radial feed 0,36 - 7,1 mm/rev main gear-box motor 18,5 kW max. angle of teeth +/- 45 Grad workpiece weight 4000 kg Distance between centres 3200 mm center height over square guid... more
5

Slotting Machine - Vertical STANKO 7 A 420

Bünde bei BielefeldGermany dealership location
6460 km
1976
used
max. ram stroke 200 mm throat 480 mm table diameter 500 mm ram stroke 20 - 200 mm table movements: X = 500 / Y = 400 / 360° tool cross-section 20 x 30 mm ram adjustment 264 mm stroke speeds 40/64/102/163 m/min table feeds longitudinal and cross 0,1 - 1,2 table rotation speed 0,066 - 0,799 U/min rapid traverse longitudinal and cross 1,8 m/min rapid power traverse circular 3,4 U/min total power requirement 4,1 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,3 x 1,27 x 2,18 m E... more
6
plate width: 2000 mm plate thickness: 6,3 mm distance between columns: 2280 mm cutting angle - upper blade: 1°30` ° back gauge - adjustable: [...] manuell mm number of cutting strokes max.: 60 Hübe/min height over floor: 900 mm voltage: 380/50 V / Hz total power requirement: 11,8 kW Weight approx.: 4,3 t space requirement of the machine approx.: 3,0x0,7x1,55 m S8wquomak crank guillotine shears continous + single stroke possible driven by electric motor down (force = 940kp) with guard limit stop... more
1
x-travel:340 mm y-travel:200 mm z-travel:300 mm spindle turning speed range:20 - 2000 U/min Table area:650 x 200 mm spindle stroke:60 mm feeds:12,5 - 400 mm/min weight of the machine ca.:1,5 t total power requirement:3 kW Fq0z3wj dimensions of the machine ca.:1,5 x 1,2 x 1,8 m more
3
2 pieces heating oil storage tanks - block arrangement Gra7ed2qi contents 620 litres each registration number Z-40.21-161 total space requirements - width - 1,400 x depth - 720 x height - 1,700 mm total weight approx. 230 kg more
6

Heavy Duty Lathe STANKO-RYAZAN RT 950 F3 x 6000

ab Werksstandort,unter StromGermany dealership location
6405 km
2007
used
turning diameter over bed 1880 mm turning diameter over slide rest 1500 mm turning length 6000 mm spindle turning speed range 1 - 250 U/min turning tool - shaft cross cut 40x50 mm longitudinal adjustment 6000 mm cross adjustment 810 mm 7ijaehemo rapid traverse longitudinal 4000 mm/min rapid traverse cross 2000 mm/min controlled axis 2 main drive motor 80 - 130 kW bed width 1350 mm threading metric 1 - 120 mm/Stg. threading WHITWORTH 28 - 0,25 TPI thread - module 0,5 - 30 module Control Sinumer... more
Cagxtzfr more
6
Make: De Dietrich and Cle NiederbronnYear of manufacture: 1979capacity: 5430l 7nnsgpxmu more
5
faceplate diameter:4500 mm swing diameter:4870 mm turning height:2300 mm Bblqubzdub slide stroke:1300 mm ram head dimension:300 x 300 8-edge mm faceplate turning speed range:1 -25 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Modernisation with CNC SIEMENS 840 D in 2012 Tool Basic holder KM 80 In process camera screen coolant attachment and chip conveyor more
6
turning diameter over bed 700 mm turning diameter over slide rest 360 mm turning length 3000 mm spindle bore 72 mm spindle speed: 10 - 1250 U/min Ciqzsjd tailstock quill taper MT MK 5 quill adjustment 300 mm total power requirement kW weight of the machine ca. 5,8 t dimensions of the machine ca. 5,3 x 1,7 x 1,8 m with digtal read out system in y+x axis more
6

STANKO K3TC

BabberichNetherlands dealership location
6320 km
used
Guqgrfkpw more
6
A FLAMCO expansion vessel coming from a building demolition of a bank to sell. Technical data: Type: FLEXCON AIRFIX D E Year of manufacture: 02/05 Nominal capacity: 300 Liter Permissible operating pressure: 16 bar Test pressure: 22.9 bar Permissible operating temperature min. / Max 0 / 70 ° C Connection: DN40 / PN 16 Diameter: 550 mm Height: 1845 mm Inspection valid until 01/15 Space Lxwxh: 750 x 600 x 1850 mm Weight: 165 kg Baiqqgp3fr Changes / error... more
3
570 liter capacity4 Atü (approx. 4 Bar) 7nnszscuw more
3
Max diameter of gears cut 800 mm Max module 12 mm Max cutter stroke 200 mm Saddle indexing gear diameter: 360 mm Axes distance (tool and table) 0-700 mm Largest tool diameter 200 mm Cutter arbor diameter 44.443 mm Taper M5 Table diameter 800 mm Distance from floor to table 870 mm Indexing gear diameter: 762 mm Table hole diameter: 120A mm Double s.p.m. 33-188 mm Range of table feed rates per cutter double stroke: -Circular 0.2-1.5 mm -Radial 1-5.4 mm Bbxjkzrqyc Table rapid rotat... more
6

Stanko Russia 16 K 40

BabberichNetherlands dealership location
6320 km
2003
used
Bbj7hipz2s more
5
used from plant disassembly 2qyobm was as a domestic hot water tank of a laser cutting system in use External dimensions Lxwxh: CA. 2400 x 1100 x 1800 mm Tankmasse Lxwxh: approx. 2200 x 900 x 1700 ~ approx. 3000 L Feeding tube Ø 500 mm 3 processes partially with Cap 1 overflow Changes / errors in the specifications and subject to prior sale more
5
: - kg : - kW : - °C tank capacity: 1000 l Mt3bn Oil combi tank with housing double walled application: storage of heating oil EL, diesel fuel, lubricant oil and hydraulic oil General Construction Approval: Z-40.21-53 Condition as good as new! more
5

Gear Shaping Machine STANKO 5 M 150 P

ab Lager Monheim am RheinGermany dealership location
6405 km
1988
used
max. wheel diameter 800 mm Xtixnyw gear width 170 mm max. module 12 min. module 1 max. number of teeth 400 min. number of teeth 10 max. angle of teeth 23 mm max. ram stroke 200 mm dia. of shaper cutter 200 mm dividing plate diameter 672 mm taper Morse Nr. 5 faceplate diameter 800 mm Length movement of the table 700 mm double strokes/min. 33 - 188 Stück electrics - voltage/frequency 380 / 50 V/Hz workpiece height max. 300 mm total power requirement 15 kW weight of the machine ca. 10,5 t dim... more
6
0 20000 l 0 200 °C temperature min. -10 °C print area -1/+3 bar Test pressure +6 bar Dtxbpkmj more
Type 3M197 - was previously used to manufacture hydraulic cilinders High level of accuracy: 8 microns!! due to the stirdy build of the machine in combination with the considerable foundation which is required. L8iad max workpiece length: 4000 mm   max workpiece weight: 10 ton max workpiece in steadie: 450 mm max workpiece without steadie: 800 mm min workpiece in steadie: 80 mm min workpiece without steadie: 80 mm centerheight: 410 mm movement of table: 4300 mm -----... more
4

CNC Lathe STANKOMASHSTROJ ST16A25

Lager EnnepetalGermany dealership location
6422 km
2017
used
turning diameter 0500 mm turning length 1000 mm control Fanuc 0i turning diameter over slide rest 280 mm spindle turning speed range 21- 1620 U/min longitudinal feeds: 0-1000 mm/min cross feeds: 0-1000 mm/min spindle passage 77 mm total power requirement 10 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 2,5 x 1,37 x 1,69 m 9rgrelwwp NEW MACHINE as a flat bed machine ! Machine with housing (CE conform), 6 position turret and three jaw [...] Fanuc 0i more


beer tank
every day

New machines via email!

Be informed!

to

to

Change search
BEER TANK
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close