INOX GC Magusa, Linde AG Fermentation and storage cellar (2015)

INOX GC Gär- und Lagerkeller

Condition: used, Year of construction: 2019, Overview This carbonator from Italian Manufacturer Sfoggia was built in 2019. It has had very little use and is in immaculate condition.   Technical Details Capacity: 2,500 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels - max pressure: 6 bar Dimensions (LxWxH): 1000mm x 820mm x 2100 mm Weight: 150 kg Dujdpfjr A S E Hjx Afkjp

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio Dodpfx Aot Eui Iofkoup * Optionally with oil or gas burner Technical data: * Boiler output 40 kW * Hourly output up to 550 liters (10-78 °C) * Dimensions (H/W/D) approx. 140 x 100 x 115 cm * Empty weight approx. 190 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: used, Year of construction: 2001, Overview  This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available.  Technical Details  Capacity: 13,000 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels 0-8 g/l CO2 8200 l buffer tank CO2 content can be adjusted on control panel Siemens S7 control panel Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc Dedpfxjvdd Uus Afkeup

Year of construction: 2017, condition: like new (used), - Special: with carton box passage - Very few operating hours - Condition technically and optically practically as good as new Dodpsh Agqlsfx Afkjup Dimensions: - Length: 3300 mm - Width: 900 mm - Height: 1800 mm

Condition: used, Year of construction: 2022, Overview  This carbonating unit was manufactured in 2022 by German company KH TEC. The machine is designed for beer carbonation. The unit is stopped, still in production condition, and equipped with HMI and automated operation. It is available immediately and can be visited on request. The machine is being sold as it will be replaced by a new system. Technical data Capacity: 20 HL/hour Application: Beer Configuration: Automated, HMI-controlled   Duodpfx Afoyk Ab Dskjp

Condition: used, Year of construction: 2014, Overview  This set of 6 isobaric fermentation tanks was manufactured in 2014 by the Spanish company Talleres Perman S.L.. Each tank has a capacity of 1,000 liters and is designed for fermentation and maturation under pressure, ideal for beer, cider or sparkling wine. The tanks have integrated cooling jackets and have decorative wooden cladding on the outside, which can be removed if necessary. The tanks are for sale as a planned increase in production was ultimately not realized. Available immediately. Technical details  Capacity: 6 x 1,000 liters Working pressure: up to 3 bar Diameter: approx. 125 cm Height: approx. 190 cm Base design: conical base with 30° angle Type: Isobaric fermentation and maturation tanks with cooling jacket With integrated cooling jackets With decorative wooden cladding (removable) Scope of delivery  6 x Talleres Perman DI1 | Year of construction 2014 isobaric fermentation and maturation tanks Dusdpswzb T Ujfx Afkep

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 3 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tanks, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Serial number - KB-20211022002 Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Dusdpfewl H Nisx Afkop Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Year of construction: 1991, condition: used, Storage tank, insulated, stainless steel, cooling jacket for glycol cooling. Dedpfx Aew Tldysfksup Additional title: Insulated tank with cooling jacket Capacity: 13 hl Width: 1300 mm Height: 2300 mm Formats: Flat conical Operation / Control: Manual Material: stainless steel 1.4301 Position: vertical Base construction: on 4 feet Features: double-walled with full jacket cooling, with sampling tap, pipe connections

Condition: new, Factory-new stainless steel transport container with anchor agitator Type: SLA1150RWA Volume: Approx. 1150L Design: Vertical construction with forklift pockets Execution: Single-walled, min. 1.5mm wall thickness Material (media-contacting): 1.4301 stainless steel Surface: Satin finish outside, IIId inside Internal weld seams: Pickled, passivated, and brushed Operating pressure: Atmospheric Top cover: Central traverse with two hinged lid halves Bottom: Torispherical head with discharge groove Dusdjw Dy Ngepfx Afkjp Tank dimensions: Tank diameter: 1190mm Cylinder height: 1000mm Total height: 1300mm (plus agitator motor) Features: - Central traverse with two hinged lid halves, stainless steel perforated plates underneath the hinged lid as reach-in protection, bolted, removable - Tank mounted on a stainless steel transport base with forklift openings - DN50 disc valve outlet fitting DIN1185, seal EPDM - Nameplate Agitator: Central anchor agitator Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTGMK/0.75-13 Power: 0.75KW Speed: 13 RPM Operating voltage: 3PH 400V Product-contacting material: 1.4301 stainless steel - Gearbox by Getriebebau NORD - Solid agitator shaft connected to the agitator motor with a sleeve coupling, removable - Agitator shaft balanced for smooth rotation within the speed range - Large-surface stainless steel anchor-style agitator, welded design, weld seams pickled, passivated, and brushed - Stainless steel flange with shaft seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, no-voltage release, emergency stop Fully prewired

Year of construction: 2011, condition: used, tank capacity: 1,100 l, GENERAL Equipment: Level indicator (without guarantee), disc valve, spray head, crane lugs Design: upright Year of manufacture: 2011 Notes: Exhibition tank - slight signs of use; yeast plug installed inside Outer diameter: 1,200 mm Inner diameter: 1,000 mm Total height: 2,580 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 50 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.00 bar Support type: feet Location: Bremen Technical documentation: drawing, TÜV certificates, CE marking and declaration of conformity, operating instructions Cylinder temperature control: thermoplate Nameplate: Volume: 1,100 liters Double jacket volume: 10.0 liters Double jacket material: V2A 1.4301 (AISI 304) Product-contact material: V2A 1.4301 (AISI 304) Condition: unused Cylindrical height: 1,000 mm TANK Max. permissible operating temperature: 50 °C Bottom: conical floor Number of feet: 4 pcs INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness: 100 mm FEATURES Manhole / access: in cylinder Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Internal surface: high-gloss Dodpfsxqcp Hjx Afkjup Feet material: stainless steel