Used horizontal band saws - manual - cutting range 221-299mm for sale (84)

Condition: used, Metal band saw Hans Schreiner MBS270, good condition, 1.5 kW, 2450 mm band length, 227 kg Hedpfowzzgnsx Aansnr Subject to price changes, errors, printing and typographical mistakes excepted.

Condition: used, Metal band saw Hans Schreiner MBS270FH, very good condition, 1.5 kW, 260 mm cutting length, 140 mm cutting length, 227 kg Hedpjx H Ui Tofx Aanenr Prices subject to change without notice. Errors, misprints, and typographical mistakes excepted.

Condition: new, Year of construction: 2025, cutting diameter 280 mm saw band length 3660 x 27 mm cutting width 0,9 mm capacity 90 degrees: square 270 x 270 mm capacity 90 degrees: flat 210 x 330 mm total power requirement 1,5 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1350 x 2250 x 1860 mm The GERD WOLFF KMS 280 is a precision servo-driven bandsaw designed for Hnjdpfx Aaeyk Ii Henjr consistently accurate cutting.

Condition: used, Year of construction: 1992, cutting diameter 260 mm saw band length 3890 mm cutting width 340 mm cutting speed Stufenlos m/min total power requirement 2,4 kW Hnsdpfx Aaju Rt Hdoner weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5 x 1,4 x 2,0 m Vice can be adjusted for angle cutting.

Condition: new, Electrical voltage: 400 / 440 V Frequency: 50 / 60 Hz Hedpfxjd R Uzzs Aansnr Number of phases: 3 / 3 phases

Condition: new, Robust band saw for steel and stainless steel. Double-bevel cuts, up to 60° to the right and up to 45° to the left. 2 speeds: 35 and 70 m/min. Manual lifting of the saw frame, assisted by tension springs. Downward movement is achieved by gravity, dampened by an oil damper with an adjustable throttle valve. Cutting capacity examples: Round: 90°: 235 mm -45°: 165 mm +45°: 185 mm +60°: 115 mm Rectangular: 90°: 280 x 180 mm -45°: 185 x 80 mm +45°: 185 x 100 mm +60°: 115 x 80 mm With: Cooling system Vise with quick-release mechanism Mechanical material stop Hnedpfx Ajztu R Ioansr Manometer for saw blade tension Mechanical saw brush - Also available in the ARG 260 Plus version (cutting capacity for round stock: 260 mm) – available from stock!

Condition: ready for operation (used), Year of construction: 2026, Optimum 275 N demonstration machine Hedpjztcydefx Aanjnr Model: Opti S 275 N Technical data: Cutting range 0 degrees, round: diameter 225 mm Cutting range 0 degrees: 245 x 180 mm / rectangle Cutting range 45 degrees, round: diameter 160 mm Cutting range 45 degrees: 160 x 160 mm / rectangle Cutting range 60 degrees, round: diameter 100 mm Cutting range 60 degrees: 100 x 100 mm / rectangle Saw bow lifting: manual Feed: steplessly adjustable Errors and omissions excepted.

Condition: good (used), Year of construction: 2014, Cutting range examples: at 90° 260mm round 300x260mm rectangle at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. Hnodezrmk Rjpfx Aansr with the option of hydraulic lifting of the saw frame.

Condition: excellent (used), Cutting capacity, circular: 255 mm Cutting capacity, rectangular: 315 x 230 mm Cutting capacity, square: 230 mm Hnjdpfx Aeznh Nmoanor Cutting capacity, miter cut at 45° circular: 160 mm Saw blade dimensions: 27 x 0.9 x 2750 mm Saw blade speed, infinitely adjustable Saw blade drive: 400 V, 1.5 kW Space requirement: 1800 x 1600 x approx. 1800 mm Weight: 380 kg

Condition: new, Year of construction: 2025, functionality: fully functional, power: 1.1 kW (1.50 HP), input voltage: 400 V, type of input current: three-phase, total height: 1,700 mm, total length: 1,400 mm, total width: 685 mm, overall weight: 200 kg, cutting range round steel at 45°: 145 mm, cutting range round steel at 90°: 225 mm, cutting range square steel at 45°: 150 mm, cutting range square steel at 90°: 190 mm, saw band length: 2,480 mm, saw band width: 27 mm, Saw band --- 2480 x 27 x 0.9 mm Saw speed --- 45 - 90 m/min Motor --- 400V - 1.1 kW Weight --- 200 kg Cutting capacity at 0° ----- 225 mm / 190 x 190 mm / 245 x 150 mm Cutting capacity at 45° ----- 145 mm / 150 x 150 mm / 190 x 150 mm Cutting capacity at 60° ----- 90 mm / 90 x 90 mm / 120 x 90 mm INCLUDED * Adjustable material clamp * Graduations up to 60 degrees * Automatic shut-off * Low-noise electric motor * Enclosed worm gear transmission * Hydraulic pressure control * CE emergency stop Hnsdoga Tzqjpfx Aaner * Coolant pump * Base cabinet * Quick-release clamp * M42 Bi-metal saw band

Condition: used, Year of construction: 2026, The CORMAK HBS320 Metal Band Saw is a high-performance, professional cutting solution designed for workshops and industrial facilities that require a reliable machine for precise cutting of pipes, profiles, and solid metal stock. Its robust construction, wide mitre cutting range, and compatibility with material feeding systems make it a versatile metal band saw for both production and fabrication applications. Key Features Mitre cutting from -45° to +60° – allows bevel cuts in both directions without repositioning the workpiece. Powerful 1.5 kW motor – delivers consistent performance and cutting stability, even when processing hard materials. Cast iron saw bow – minimizes vibration, ensuring high cutting accuracy and long service life. Precision blade guides – equipped with bearings and carbide inserts to improve blade stability and extend blade life. Enhanced operator safety – protective guards and safety micro-switches stop the machine when required. Integrated coolant system – electric coolant pump improves cutting efficiency and assists with chip removal. Construction and Technology The machine features a welded steel frame mounted on a rigid base with an integrated coolant reservoir. The cast iron saw bow provides exceptional rigidity for the cutting assembly. Cutting is performed by a gravity-fed system with hydraulic cylinder feed control, ensuring smooth and consistent blade descent. A quick-action vise with a movable jaw allows fast and secure workpiece clamping. The machine offers two blade speeds, 44 or 88 m/min, together with infinitely adjustable feed rate control. Precision and Performance Thanks to its rigid blade guidance system, the HBS320 maintains excellent cutting accuracy even during continuous operation. The independent coolant tank and pump reduce cutting temperatures, improve cutting quality, and extend blade life. An automatic motor shut-off at the end of the cutting cycle helps reduce unnecessary wear on drive components. Applications Hodpfx Aezqrrwsanenr The CORMAK HBS320 metal band saw is suitable for cutting: Structural steel Stainless steel Tool steel Copper Aluminium Plastics It is an ideal solution for metal fabrication shops, tool rooms, steel structure manufacturers, maintenance workshops, and custom production facilities. Standard Equipment Quick-action machine vise Hydraulic feed cylinder with adjustable descent speed Coolant pump with coolant tray and chip collection system Two-speed blade drive Safety micro-switch protection system Optional Equipment Roller table extension Technical Specifications Specification Value Maximum round cutting capacity (90°) Ø 260 mm Maximum rectangular cutting capacity (90°) 320 × 160 mm Power supply 3-phase, 400 V Motor power 1.5 kW Feed control Hydraulic cylinder Blade size 2740 × 27 × 0.9 mm Blade speed 44 / 88 m/min Vise height 920 mm Overall dimensions 1400 × 880 × 1550 mm Weight 280 kg PLEASE NOTE! This machine is a returned item; it is second-hand but in working order. NO WARRANTY!

Condition: used, Pilous ARG 235 Plus Horizontal Bandsaw, Includes 4500mm x 800mm Infeed Roller Conveyor and 1300mm x 800mm Outfeed Conveyor. S/No. 123/19/0043. Country of Origin: Czech Republic Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Hedpfxezn Uwde Aanonr Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: new, Year of construction: 2026, The professional CORMAK BS912N metal bandsaw is a robust and precise machine designed for cutting tubes, profiles and solid elements. The model allows cutting materials with a diameter of up to 230mm and operation at angles from 0° to 45°. Automatic downfeed of the saw arm, lowering adjustment by means of a hydraulic cylinder, a cooling system and a stable cast iron construction make this machine ideal for metalworking shops, production workshops and craft workshops. CORMAK BS912N metal bandsaw – precise angled metal cutting The CORMAK BS912N metal bandsaw is a professional machine designed for precise cutting of tubes, profiles and solid elements. Its solid construction, automatic tool downfeed and hydraulic adjustment of the saw arm lowering ensure convenient operation, repeatability and high cutting quality. The BS912N model allows cutting of materials with a diameter of up to 230 mm and making angled cuts in the range from 0° to 45°. This makes the machine suitable for metalworking shops, production workshops and anywhere that accuracy, stability and machining speed matter. Main advantages of the machine Automatic tool downfeed increasing convenience and cutting repeatability Hydraulic adjustment of saw arm lowering using a cylinder and an oil flow control valve Cutting at angles from 0° to 45° thanks to the swivelling vice Heavy cast iron vice ensuring stable clamping of the material Blade guides with carbide inserts and bearings affecting cutting accuracy and quality Cooling system supplying coolant to the blade and the cut element Wire brush cleaning the blade preventing the blade from clogging Automatic drive shut-off after completion of the cut by means of a limit switch Construction and technology The material to be cut can be fed manually or by means of any mechanical device. The tool feed is automatic, which makes the operator’s work easier and allows stable, repeatable results to be achieved. The lowering speed of the saw arm is adjusted by means of a hydraulic cylinder. The appropriate speed is obtained thanks to a valve regulating the oil flow between the cylinder chambers. This solution makes it possible to adapt the machine operation to the type of material being processed and the expected cutting precision. The required linear blade speed is obtained by changing the ratio on the belt pulleys between the worm gearbox and the drive motor. In the machine base there is a coolant tank with an electric pump, responsible for effective cooling of the blade and the workpiece. Equipment and functions Automatic tool downfeed Hydraulic adjustment of saw arm lowering Swivelling vice with angle scale Quick vice clamp Convenient handle for blade tensioning Blade tension indicator Table for selection of blade tooth pitch and cutting speed Cooling system for the blade and cut material Wire brush cleaning chips from the blade Blade guides with carbide inserts and bearings Automatic limit switch after cut completion Emergency stop of the “mushroom safety” type Technical data Motor 230 V, 50 Hz, 1100 W / 400 V, 50 Hz, 1100 W Blade dimensions 2655 x 27 x 0.9 mm Blade speeds 24 / 36 / 49 / 71 m/min Cutting angle range from 0° to +45° Machine package dimensions 1420 x 500 x 1150 mm Weight 151 / 202 kg Angle Hnedpjy En E Sefx Aanor 0° Ø 229 191 x 305 max. 355 230 x 230 45° Ø 160 230 x 140 155 x 155

Condition: new, Year of construction: 2026, CORMAK S200R Manual Metal Band Saw The CORMAK S200R metal band saw is designed for both single-piece and series production. With the ability to perform angled cuts from -45° to +60°, it is an ideal solution for cutting pipes, profiles, and solid materials. The construction based on a massive cast-iron arm and a precise blade guidance system ensures high cutting accuracy and repeatability. The feed is gravity-controlled by a hydraulic cylinder with smooth descent adjustment, providing a controlled and efficient cutting process. Main Advantages of the Machine Solid cast-iron construction increases machine durability and cutting accuracy. Wide angle cutting range from -45° to +60° thanks to the rotating arm design. Blade guides with carbide inserts and bearings ensure straight cutting and extended blade life. Gravity feed controlled by a dual-chamber hydraulic cylinder provides smooth and precise cutting. High level of operator safety thanks to limit switches, micro-switches, and an emergency stop button. Automatic stop after completing the cut and blade break protection function improve safety and reliability. Construction and Technology The machine is built on a rigid steel base equipped with an integrated coolant tank and circulation pump. The saw arm is manufactured from a single cast-iron casting, significantly improving stability and vibration damping during operation. The drive system uses a three-phase motor with two blade speeds (36/70 m/min) selectable from the control panel. The arm inclination of 25° relative to the base extends blade life and improves cutting quality. Precision and Work Efficiency High cutting accuracy is achieved through the cooperation of carbide blade guides and rolling bearings, ensuring precise blade alignment. Maintaining optimal blade tension improves cutting efficiency and reduces the risk of failures. The automatic stop function after completing the cut eliminates operator errors and increases workplace safety. The combination of a rigid structure, precise blade guidance, and controlled hydraulic feed guarantees reliable performance in demanding applications. Applications The CORMAK S200R metal band saw is ideal for: Hnodpfjfy Ttiox Aanor industrial production plants, metalworking and fabrication workshops, steel construction companies, maintenance departments. The machine enables precise cutting of: carbon steel, stainless steel, tool steel, closed profiles, solid metal sections. Standard Equipment Mechanical quick-clamping vice Hydraulic cylinder with smooth descent adjustment Blade cleaning brush Coolant pump with closed circulation system Length stop with measuring scale Optional Equipment Material feeding roller system Technical Specifications Parameter Value Machine type Manual metal band saw Cutting method Gravity feed Blade speed 36 / 70 m/min Cutting angle range -45° to +60° Vice type Manual Saw blade dimensions 27 × 0.9 × 2910 mm Motor power 1.8 kW Vice base height 890 mm Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 500 kg

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. Hnsdpjmrnk Esfx Aanor The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg

Condition: new, Year of construction: 2026, The CORMAK MCB350HD Metal Band Saw is a professional-grade metal cutting machine designed for precise mitre cutting from -45° to +60°. Equipped with a heavy-duty cast iron saw bow and a gravity-fed hydraulic feed system, it is ideal for both small-batch and high-volume production. Its rigid construction and premium components enable efficient cutting of structural steel, stainless steel, tool steel, solid bars, pipes, and hollow sections. The machine is equipped with a quick-action vise lever, allowing fast and convenient workpiece clamping. Key Features Mitre cutting range from -45° to +60° – ideal for cutting pipes, profiles, and solid materials at various angles. Heavy-duty cast iron saw bow – provides exceptional rigidity, vibration resistance, and cutting accuracy. Precision blade guidance with carbide inserts – ensures accurate blade tracking while extending blade service life. Automatic shut-off after cutting – improves operator safety and reduces unnecessary power consumption. Gravity-fed hydraulic feed system – delivers smooth, continuously adjustable feed pressure throughout the cutting cycle. Construction and Technology The MCB350HD is built around a robust welded steel frame combined with high-quality cast iron components. The 25° inclined saw bow improves cutting efficiency while extending blade life. A durable worm gearbox drive system ensures reliable long-term operation, while the integrated blade tension indicator (dial gauge tension meter) provides precise blade tension adjustment for consistent cutting performance. The machine is also equipped with a blade cleaning brush, a closed-loop coolant system with electric pump, and a material stop with measuring scale, making repetitive cutting to identical lengths quick and accurate. Precision and Performance The CORMAK MCB350HD metal band saw offers two blade speeds of 36 and 72 m/min, allowing the operator to match cutting parameters to different materials. Precision blade guides featuring bearings and carbide inserts ensure straight, accurate cuts while minimizing blade wear. The coolant system delivers emulsion directly to the blade guides, improving cutting conditions, reducing heat generation, and extending tool life. Applications The MCB350HD is designed for manufacturing plants, metal fabrication shops, engineering workshops, and maintenance facilities where reliability, repeatability, and versatility are essential. It is suitable for cutting: Steel pipes Hollow sections Structural profiles Flat bars Solid round and square bars Stainless steel and other ferrous and non-ferrous materials Standard Equipment Blade cleaning brush Coolant system with pump and reservoir Material stop with measuring scale Bi-metal band saw blade Blade and gearbox safety guards Optional Equipment Roller conveyor table for material feeding Additional band saw blades Laser cutting line positioning system Technical Specifications Specification Value Blade dimensions 2950 × 27 × 0.9 mm Blade speed 36 / 72 m/min Minimum cutting diameter Ø 5 mm Minimum workpiece length 100 mm Vise base height 940 mm Total installed power 2.2 kW Hedpfx Aei D Di Soanonr Drive wheel diameter 330 mm Overall dimensions (L × W × H) 2000 × 1330 × 2020 mm Weight 540 kg

Condition: new, Year of construction: 2026, The CORMAK HBS320 Metal Band Saw is a high-performance, professional cutting solution designed for workshops and industrial facilities that require a reliable machine for precise cutting of pipes, profiles, and solid metal stock. Its robust construction, wide mitre cutting range, and compatibility with material feeding systems make it a versatile metal band saw for both production and fabrication applications. Key Features Mitre cutting from -45° to +60° – allows bevel cuts in both directions without repositioning the workpiece. Powerful 1.5 kW motor – delivers consistent performance and cutting stability, even when processing hard materials. Cast iron saw bow – minimizes vibration, ensuring high cutting accuracy and long service life. Precision blade guides – equipped with bearings and carbide inserts to improve blade stability and extend blade life. Enhanced operator safety – protective guards and safety micro-switches stop the machine when required. Integrated coolant system – electric coolant pump improves cutting efficiency and assists with chip removal. Construction and Technology The machine features a welded steel frame mounted on a rigid base with an integrated coolant reservoir. The cast iron saw bow provides exceptional rigidity for the cutting assembly. Cutting is performed by a gravity-fed system with hydraulic cylinder feed control, ensuring smooth and consistent blade descent. A quick-action vise with a movable jaw allows fast and secure workpiece clamping. The machine offers two blade speeds, 44 or 88 m/min, together with infinitely adjustable feed rate control. Precision and Performance Thanks to its rigid blade guidance system, the HBS320 maintains excellent cutting accuracy even during continuous operation. The independent coolant tank and pump reduce cutting temperatures, improve cutting quality, and extend blade life. An automatic motor shut-off at the end of the cutting cycle helps reduce unnecessary wear on drive components. Applications The CORMAK HBS320 metal band saw is suitable for cutting: Structural steel Stainless steel Hjdpei D Dgwefx Aanenr Tool steel Copper Aluminium Plastics It is an ideal solution for metal fabrication shops, tool rooms, steel structure manufacturers, maintenance workshops, and custom production facilities. Standard Equipment Quick-action machine vise Hydraulic feed cylinder with adjustable descent speed Coolant pump with coolant tray and chip collection system Two-speed blade drive Safety micro-switch protection system Optional Equipment Roller table extension Technical Specifications Specification Value Maximum round cutting capacity (90°) Ø 260 mm Maximum rectangular cutting capacity (90°) 320 × 160 mm Power supply 3-phase, 400 V Motor power 1.5 kW Feed control Hydraulic cylinder Blade size 2740 × 27 × 0.9 mm Blade speed 44 / 88 m/min Vise height 920 mm Overall dimensions 1400 × 880 × 1550 mm Weight 280 kg

Condition: new, Year of construction: 2026, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 230V Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Angle 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 Hnjdjmtwktspfx Aaner 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, For sawing, e.g., stainless steel, tool steel, hollow profiles, and solid materials. Two-pole drive motor enables saw blade speeds of 30 and 65 m/min. Hnodpfx Aog U Uv Reaner Monitoring of the saw blade tension electromechanically via microswitches. When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve – additional locking on the cylinder is therefore not required. Saw arm inclined by 25°, resulting in a longer service life of the saw blade. Precise and robust blade guides with adjustable carbide plates. After the cutting process is completed, the saw blade stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With continuously adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 30 / 65 m/min Speed stages 2 Saw blade length 2450 mm Saw blade width 27 mm Saw blade thickness 0.9 mm Material feed Table height, material feed 925 mm Cutting ranges 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular (lying, hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular (lying, hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular (lying, hollow profile) 90 x 90 mm Art. No.: 3680001 Location: In stock, 54634 Bitburg - immediately available -

Condition: used, Working mode: semiautomatic Machine type: Horizontal bandsaw Cut: Mitre cut Mitre cuts range: -60° – 60° Drive: 4 kW, 3×400 V/50 Hz Saw band speed: 20 – 120 m/min. Hsdpjydp Udefx Aansnr Saw band dimensions: 6 100×41×1,3 mm Material loading height: 770 mm Shortest remnant length: 40 mm Smallest sawing diameter: Ø 5 mm

Condition: new, 1 brand new horizontal bandsaw machine with a swiveling frame and double miter capability (R/L) Manufacturer: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm Hedpfxsfk Ew Eo Aanonr +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 760 mm Motor power, main drive 1.0 - 1.3 kW, 400 V, 50 Hz Motor power, coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Double miter capability through a swiveling frame o The material to be cut remains straight in space! o No need to turn the material for miter cuts! o High efficiency with enormous time savings! • Adjustable precision stops 0°, 45° and 60° on the left and 45° on the right • Interchangeable work table • Quick-release vise, can be shifted to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is regulated steplessly by a hydraulic cycle • Coolant system • Chip brush • Swiveling control panel • Electric safety switch for blade tension and saw blade guard • Automatic shutdown at the end of the cut • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: ready for operation (used), Year of construction: 1982, Band saw with miter cutting device, manufacturer: HESKA, type: HSE 260, year of manufacture: 1982. The machine has been partially overhauled and includes a support stand, machine documentation, and a coolant system. Hnjdpfozictcox Aanjr Sawing capacity for round stock: max. 260 mm.

Condition: new, Technical data: Cutting range: round 0°: 255 mm square 0°: 200 x 200 mm flat 0°: 320 x 200 mm round 45°: 195 mm square 45°: 195 x 195 mm flat 45°: 195 mm round 60°: 125 mm square 60°: 125 x 125 mm flat 60°: 130 x 120 mm round -45°: 200 mm square -45°: 170 x 170 mm flat -45°: 200 x 170 mm Cutting speeds: 35 / 70 m/min Saw band: 2750 x 27 x 0.9 mm Working height approx.: 930 mm Coolant pump: 100 W Saw motor: 1.5 kW Connection: 400 V Dimensions L x W x H, approx.: 2000 x 1250 x 1900 mm Weight, approx.: 350 kg Features: - Double miter saw with a swiveling saw arm from -45° on the left to +60° on the right - Ideal for cutting tubes, profile material, and solid material made of stainless steel, iron, etc. in commercial applications - Generously sized cast saw arm for vibration-free operation - With 2 saw band speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vise for easy and fast workpiece clamping - Precise, adjustable saw band guide for optimal cutting results - CE/IEC, German documentation and German service Scope of supply: Hnodpfx Aod R Sipjansr - Saw band - Material stop - Manometer (band tension) - Saw band carbide guides - Vise with quick-release mechanism - Integrated coolant system - Hydraulic arm lowering - Motor protection switch - Automatic end stop - Base frame

Condition: used, functionality: fully functional, SEGATRICE MANUALE usata, BIANCO 370 M.REVISIONATA e RIVERNICIATA. Hnedpfx Aaozhuptsnjr

Condition: used, functionality: fully functional, SEGATRICE MANUALE usata BIANCO 370. Hnedozhupaspfx Aansr