Used horizontal band saws - manual - cutting range 221-299mm for sale (70)

Condition: used, Year of construction: 1994, Semi-automatic horizontal bandsaw for solid material and profiles Gusdewbfhcjpfx Abmec Cutting capacity up to approx. Ø 260 mm Robust cast construction Manual feed and hydraulic cutting cycle Swivel head for angular cuts Integrated coolant system Ideal for workshops and industrial use

Condition: new, Used MACC SPECIAL 411 CSO Gravity descent bandsaw New CE The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, band guides, band tensioning) have been carefully studied to avoid the yielding of the band, increase its duration, improve linearity and cutting time. - Sawing machine with cut by falling arc regulated by a hydraulic circuit, manual bar feeding and vice closing, manual head return. - Vertical rotation on pivot with adjustable conical bearings without backlash - Band control with two-speed motor and special reducer with bronze gear and hardened and ground worm screw - Appropriately sized flywheels - Sturdy belt guides made of watertight bearings and adjustable widia plates - Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control - Vice with rapid approach device - Accident prevention safety device on the flywheel cover, on the control knob and on the blade - Hydraulic cylinder for controlled descent - Cutting thickness 1,2 mm - Cutting range 45° left 60° right - Adjustable stop for cuts of the same size - 24 V low voltage system - 0.06 kW electric pump for belt cooling - Pedestal with drawer for chips collection and extractable tank for the cooling liquid Gsdpfx Absficb Tsmeuc - Machine predisposed

Condition: new, Good brand new No. 1 available for immediate delivery! Warranty " CE " Made in Italy Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Gjdpfx Abjfibfgomsuc Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm Godpfxog U Uv Re Abmsuc -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, Year of construction: 2026, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. Gedpfx Aoi D Dgwobmsuc The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Ø max 260 mm /perpendicular cutting H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 1,5 kW Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 280 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2000, gebraucht 2000 6253 prompt, Zwischenverkauf v 1900 € 1 Schwenkrahmen 2480 x 0,9 x 27 mm 45 / 90 m/min 225 mm 180 x 245 mm rund 100 mm, 100 x 100 mm rund 160 mm, 160 x 160 mm 935 mm 1.1 kW 1500 mm 700 mm 1400 mm 225 kg Downfeed with damper cylinder and manual valve Coolant equipment Vice with fast clamping lever Godpoynmy Eofx Abmsuc Roller table 2000 mm with manual gauge 3 pcs. spare bands Operating manual with EC conformity declaration OPTIONS: Further roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2023, gebraucht 2023 6242 prompt, Zwischenverkauf v Italien 5400 € 1 Schwenkrahmen 2450x27x0,9 mm 35/70 m/min 220 mm 220 mm 260x140 mm rund 160 mm, quadrat 155 rund 95 mm, quadrat 95 mm 965 mm 1200 mm 1100 mm 1860 mm 240 kg demo machine / mint condition net price (price for new machine € 6.730,00) manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment OPTIONS: Roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details: Gusdpjwiqpzjfx Abmoc

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width max. 245 x 150 mm voltage 230 V power capacity 1,5 kW dimensions of saw-band 2480 x 27 x 0,9 mm Gjdpfjy Ty Dpjx Abmeuc mitter cutting 0 - 60 ° cutting speed 20 - 90 m/min weight of the machine ca. 185 kg dimensions of the machine ca. 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device

Condition: new, Band saw machine Gujdecuntzopfx Abmec Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: - horizontal vice - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions

Condition: good (used), Cutting range 90° round: 240 mm Square approx.: 260 x 180 mm Saw band: Guedeimqt Aopfx Abmec Cutting speeds: Fixed jaw: 310 x 110 mm Moving jaw: 190 x 110 mm Opening: 270 mm Equipment: mobile Condition: good Connection: 1,1 kW Weight: 230 kg Dimensions: 1.400 x 800 x 1.300 mm

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m Gedpehpktvofx Abmouc The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, Year of construction: 2026, BAND SAW MACHINE CORMAK BS912N Specification: The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The lowering speed of the saw arm is adjusted using a hydraulic cylinder. The appropriate speed is achieved via a valve regulating oil flow between the cylinder chambers. The desired blade speed is obtained by changing the transmission ratio on the belt pulleys between the worm gearbox and the drive motor. A coolant tank with an electric pump is located in the base. High precision and solid construction place this machine among the leading band saws in its class, offering a large cutting capacity of up to 230 mm and angle cutting from 0° to 45°. The CORMAK BS912N band saw, thanks to innovative improvements combined with high-quality bimetal blades, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are essential. The cutting angle is set using a swivel vise in the range of 0°–45°. The vise features massive walls made of durable cast iron. At the rear of the vise, there is an angle scale for quick and convenient angle adjustment. Both blade guides are equipped with a cooling system that supplies coolant to the blade and the workpiece. This model includes a convenient blade tensioning handle and a quick-release vise clamp for the workpiece. The saw arm features a blade tension indicator and a chart for selecting blade tooth pitch and cutting speed depending on the type of steel being cut. At the lower position of the arm (after completing the cut), the blade drive is automatically switched off via a modern limit switch. Safety during operation is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops it after cutting, an emergency stop button (“mushroom type”), and multiple micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Additionally, the machine is equipped with a wire brush that cleans chips from the blade, preventing clogging and improving cutting efficiency. The blade guides are fitted with special carbide plates and bearings, significantly improving blade guidance, durability, straightness, accuracy, and cutting quality. Carbide guiding greatly reduces wear of both the machine and the blade. The arm, made of profiled ductile cast iron, ensures rigidity during operation and absorbs vibrations. The control panel is mounted on the saw arm. Technical Data: Technical specifications Gujdpfey En E Sox Abmec Motor 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Belt dimensions 2655x27x0.9 mm Belt speeds 24/36/49/71 m/min Cutting angle range From 0 to +45 degrees Machine packaging dimensions 1420x500x1150 mm Weight 151/202 kg MANUAL IN ENGLISH

Condition: new, Year of construction: 2026, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW TAPE SPEED - 36 / 72 m min-1 Gedsi D Di Sspfx Abmeuc DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2007, Used semi-automatic band saw MACC special 650di Cutting angle from -60° to +60° Blade dimensions: 5270 x 34 x 1.1 mm Digital angle display Cutting capacity at 0° - round 460mm - square 450x450mm - rectangle 620x450mm Machine weight: 1250kg Gsdpfx Asyzadlobmouc The machine is fully serviced.

Condition: new, Year of construction: 2025, – 2 speeds – Double mitre cut – Hydraulically adjustable sawing pressure – Quick-clamping device – Cooling – Automatic shut-off – Emergency stop – Documentation – 400V Guodpfx Ajyhh Tasbmoc

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, saw band length: 2,700 mm, saw band width: 27 mm, Features: - solid saw frame made of cast steel - miter cuts 0° - 60° right and 0° - 45° left - hard metal saw blade guides - manual vice with quick-release lever - movable vice - mechanical blade tension with electrical blade monitoring - ergonomically arranged controls Technical data: Motor power 1.3 kW Belt speed 35/70 m/min. Vice clamping width 275 mm Belt dimensions 2700x27x0.9 mm Electric coolant pump 0.06 kW Working height 990 mm Machine weight 424 kg Machine dimensions WxDxH 0.9x1.45x1.6 m Cutting range: Round Square Rectangle Guodpfxjvpuqks Abmsc 90° 240 mm 240x240 mm 310x200 mm 45° R 175 mm 170x170 mm 240x155 mm 60° R 110 mm 105x105 mm 140x100 mm 45° L 150 mm 135x135 mm 145x125 mm

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, total height: 27 mm, coolant pump power: 80 W, saw band length: 3,420 mm, saw band width: 9 mm, Semi-automatic metal band saw (fully hydraulic) for miter cuts from 0° to 60° right and 0° to 45° left -3-part saw frame: 1. Die-cast aluminum on the front to reduce weight and vibration dampening 2. Traverse made of rectangular steel tube 120x100x4 mm 3. Cast steel on the motor side to reduce vibration -solid substructure with integrated 40 l coolant tank -Hydraulic lowering of the saw frame, continuously adjustable via a flow regulator -Automatic raising of the saw frame after the end of the cut; the lifting is automatic up to the last starting position, which saves time due to unnecessary "air sawing" -solid, hydraulic vice, can be moved on linear guides -mechanical saw blade tension with electrical blade monitoring -gear reduction gear with slanted, hardened and ground teeth Gusdpfovph Hfsx Abmsc -drive roller fastening using an adjusting nut -infinitely variable blade speed from 16 - 100 m/min -hard metal blade guides -solid rotary table with cutting channel to prevent damage to the table. -engraved degree scale -mechanical miter stops at 0°, 45° and 65° -chip removal brush integrated in the saw blade guard -electric coolant pump and coolant shut-off valves on each blade guide block -ergonomically arranged control panel -24 volt control

Condition: new, manual bandsaw / self-lowering with double-sided mitre Cutting capacity 90° round 230 mm / flat 275 x 230 mm / square 230 mm 45° right round 195 mm / flat 190 x 190 mm / square 190 mm 45° left round 170 mm / flat 185 x 150 mm / square 150 mm 60° right round 120 mm / flat 120 x 85 mm / square 85 mm Material support height 760 mm Saw blade size 2720x27x0.9 mm Cutting speed 40/80 m/min. Drive power 1.1/1.5 kW//400V//50 Hz Smallest diameter 5 mm Dimensions (L x W x H): 1600 x 1150 x 1477 mm Weight 370 kg Gujdpsdx Nf Hsfx Abmoc - Installation of a minimum quantity lubrication system possible at extra cost. - Suitable roller conveyor and material stops available.

Condition: new, Semi-automatic metal bandsaw with high cutting accuracy. This machine allows for 90° cuts as well as mitre cuts, infinitely adjustable—left up to 45° and right up to 30°. (Swivel range: left 45° and right 60°) Standard features: - Large, rotatable support table with zero wear! (The saw band’s cutting channel rotates with the mitre) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Saw frame height limitation via potentiometer from the control panel Gedpoctgkzofx Abmjuc - Hydraulic cutting pressure regulation (solid material – tube) - Lowering of the saw arm via a hydraulic cylinder; infinitely adjustable - Easy, manual movement of the vice left/right - Electric band tension monitoring with saw blade breakage detection - Coolant pump with dual feed to the saw band guides - Carbide saw band guides and guide rollers - Bi-metal saw band M42 - Chip brush Technical Data ● Cutting capacity: 90° round 250 mm / flat 320 x 235 mm / square 235 x 235 mm 45° right round 220 mm / flat 230 x 210 mm / square 210 x 210 mm 45° left round 180 mm / flat 205 x 160 mm / square 160 x 160 mm 30° right round 130 mm / flat 130 x 105 mm / square 105 x 105 mm ● Drive power: 1.5 kW / 400V / 50 Hz ● Total connected load: 3.35 kVA ● Band speed: 20–120 m/min, stepless ● Saw band dimensions: 2910 x 27 x 0.9 mm ● Remnant piece length: 20 mm ● Smallest diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1480 x 2000 mm ● Weight: 410 kg Price on request!

Condition: new, Year of construction: 2024, * manual cutting cycle * autom. cut: (via selector switch) with infinitely variable adjustment of the lowering speed and adjustment of the cutting pressure via compensation spring * Sturdy, torsion-resistant and low-vibration saw frame made of cast steel * large, easily adjustable and mounted turntable, centered by central axis bolts with indexing at 0° / 45° / 60° and internal table clamping for intermediate angles * Vise with quick adjustment * HM band guides for highest cutting precision * hydraulic unit for saw blade tensioning and monitoring with display on manometer * clearly arranged control panel with all control elements * Base frame, coolant trough, coolant pump, chip brush * cutting diameter 250 mm * Cutting width 280 mm * saw blade dimensions 2950 x 27 x 0.9 mm * Vise opening max. 285 mm Godpfx Asftmxvebmjuc * belt speed 36 / 72 m/min * Cutting range at 90 degrees: round 250 mm * Cutting range at 90 degrees: square 220 mm * Cutting range at 90 degrees: flat 280 x 220 mm * Cutting range at 60 degrees: round 120 mm * Cutting range at 60 degrees: flat 140 x 80 mm * Cutting range at 60 degrees: square 80 mm * Cutting range at 45 degrees: around 200 mm * Cutting range at 45 degrees: flat left 220 x 200 / right mm * Cutting range at 45 degrees: square left 200 / right 170 mm * Machine weight approx. 0.4 t * Space requirement approx. 1.8 x 1.3 x 1.8 m

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 10370 € 199.1 € Schwenkrahmen 3120 mm 35/70 m/min 280 mm 240 mm 350x140 mm rund 230 mm, quadrat 200 Gsdpfx Aoynmq Djbmeuc rund 150 mm, quadrat 130 rund 200 mm, quadrat 170 830 mm 1550 mm 1400 mm 1750 mm 420 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment digital readout for mitre cuts

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 11070 € 212.54 € Guedpfx Aeynmqwobmsc Schwenkrahmen 3270x27x0,9 mm 35/70 m/min 280 mm 240 mm 420x200 mm rund 260 mm, quadrat 240 rund 170 mm, quadrat 160 rund 200 mm, quadrat 180 830 mm 1600 mm 1400 mm 1800 mm 438 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment

Condition: excellent (used), Year of construction: 1999, Cutting diameter round: 200 mm Gsdpfx Ajyvtcwobmsuc Saw band length: 2,830 mm Cutting angle adjustment: 45° right/left

Condition: good (used), Year of construction: 2021, Mitre cuts up to 60° left and 45° right Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Infinitely variable band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 420 kg Ball-bearing rotary table Quick-release vice Large material support Coolant system Including: Infeed roller conveyor 2x2000 mm Measuring unit 4000 mm on the discharge side with digital display Godpfxjyuyb Ne Abmsuc

Condition: new, input voltage: 400 V, cutting height (max.): 225 mm, pivoting range: 60 °, Equipment: CE marking, documentation/manual, - 2 speeds - Mitre cut - Hydraulically adjustable cutting pressure Godpfjyhibrjx Abmsuc - Quick-release vice - Cooling - Automatic shutdown - Saw blade 2480 × 27 × 0.9 mm - Emergency stop - Documentation - 400V