Used horizontal band saws - half-automatic - cutting range 0-300mm for sale (113)

Condition: used, Year of construction: 2005, cutting diameter 230 mm saw band length 2770 mm table height 940 mm capacity 90 degrees: round 230 mm capacity 90 degrees: flat 280 x 150 mm Hfsdpfx Aew Tdyasg Djr capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round R 180 mm capacity 45 degrees: round L 200 mm capacity 45 degrees: square R 155 x 155 mm capacity 45 degrees: flat R 180 x 90 mm capacity 45 degrees: square L 180 x 180 mm capacity 45 degrees: flat L 200 x 100 mm capacity 60 degrees: round 135 mm capacity 60 degrees: square 95 x 95 mm capacity 60 degrees: flat 130 x 90 mm clamping head: 280 mm cutting speed 40 / 80 m/min total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 0,9 x 1,3 x 1,8 m Semi-automatic miter band saw - Double miter - Micro spray device

Condition: good (used), Year of construction: 1985, range L-W-H 400x300x200 mm Hodpfx Agovf N Sus Dofr saw diameter 420 mm weight of the machine ca. 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm.

Condition: used, Year of construction: 2009, cutting diameter 255 mm saw band length 2750 x 27 x 0.9 mm capacity 90 degrees: flat 300 x 200 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 170 x 120 mm capacity 60 degrees: round 110 mm capacity 60 degrees: flat 110 x 150 mm table height 900 mm Control konv. cutting speed 36 m/min clamping range 305 mm total power requirement 1.5 kW weight 440 kg range L-W-H 2000 x 1200 x 1950 mm Features: - Electro-hydraulic metal band saw - With miter adjustment 45° right / 60° left - Manual saw cut (with manual lowering) - Hand switch on the saw frame (saw blade on/off) Hjdpfx Agjxacb Is Dsfr - Electro-hydraulic material clamping (close/open switch) * Includes handwheel for vise adjustment - Handwheel for manual saw blade tensioning - Coolant system - Emergency stop button at the front - Operating instructions (English)

Year of construction: 1992, condition: good (used), machine/vehicle number: 29-0288, Offer 04612 Hedpegin Ndofx Ag Defr Technical data: - Cutting range at 90° round 260 mm - flat 450 x 240 mm - Cutting range at 45° round 230 mm - flat 240 x 200 mm - Machine is mounted on original turnstile - saw band dimension 3660 x 25 x 0,9 mm - cutting speeds 20 / 35 / 50 / 70 m/min - Hydr. lifting + lowering of the saw frame - cutting pressure infinitely variable 0 - 10 m/min - Total drive power 400 V / 0,8 kW - Coolant device - space requirement approx. W 2100 x H 1200 x D 1000 mm - weight approx. 500 kg

Condition: new, Year of construction: 2025, Compact, fully automatic band saw (also miter cuts up to 45°) Torsion-resistant, robust cast iron saw frame Driven chip removal brush Powerful industrial worm gear motor Automatic shut-off after cutting and subsequent raising of the saw frame to the continuously adjustable, preset starting position Mechanical saw blade tensioning with electrical blade breakage monitoring Minimum remaining piece length 180 mm, smallest possible diameter 5 mm Feed accuracy of 0.2 mm Electric coolant pump Hodpfx Aotpg Saog Defr Precision carbide saw blade guides, ground (adjustable) Easily removable chip collection tray Including saw blade with combi-toothing 4/6 Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 12-month warranty for single-shift operation Motor: Three-phase, 400 V, pole-changing (kW) 1.1/1.5 Saw blade dimensions (mm) 2720 x 27 x 0.9 Flywheel diameter (mm) 300 Cutting speed (m/min) 40 – 80 Clamping width (mm) 275 Working height (mm) 768 2220 x 1650 x 1730 mm Weight (kg) 495 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 2009, functionality: fully functional, Bomar semi-automatic bandsaw, supplied with spare blades, easy loading Hfjdpoxbhlzjfx Ag Djr

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m EXHIBITION MACHINE at a special price!!! Hedsxfwcdjpfx Ag Dsfr Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling

Condition: good (used), Year of construction: 1995, range L-W-H 3,50/2,40/2,20 mm weight of the machine ca. 3500 kg Producer: KASTO, Type: HBA 420 AU, C93I8De Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off, Hedpfx Agsw N S Ecs Dsfr Dimensions (width x height x depth): approx. 400x200x350 cm

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950 x 27 x 0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg Hfodpexaa S Rsfx Ag Djr dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: excellent (used), Year of construction: 2018, operating hours: 400 h, functionality: fully functional, machine/vehicle number: ERGONOMIC 320.250 DG, saw band length: 2,910 mm, saw band width: 1 mm, total height: 27 mm, overall weight: 345 kg, table width: 900 mm, table length: 1,650 mm, working height: 1,250 mm, empty load weight: 345 kg, Slightly used bandsaw, fully functional. Available for testing by appointment. Hedow T U Afepfx Ag Dofr

Condition: new, Year of construction: 2025, Standard Features Torsion-resistant, robust cast iron saw frame Powered chip removal brush Powerful industrial worm gear motor Automatic shut-off after cutting Mechanical saw blade tensioning with electrical blade breakage monitoring Slidable quick-action vise Hydraulic saw frame lowering with rapid traverse function (infinitely adjustable) Electric coolant pump Precision carbide saw blade guides, ground (adjustable) Large round support table, rotates during miter cuts, miter indicator (scale) on the operator side Direct switching from manual to lowering mode Easily removable chip collection tray 500 mm material stop with scale Hjdefg Eq Repfx Ag Djfr Including saw blade with 4/6 combi toothing. Technical Specifications Motor: Three-phase 400 V, pole-changing, 1.1/1.5 kW Blade dimensions: 2720 x 27 x 0.9 mm Flywheels: 300 mm Ø Cutting speed: 40/80 m/min Vise clamping width: 275 mm Working height: 978 mm Weight: 370 kg Machine dimensions (W x D x H): 1150 x 1588 x 1477 mm Cutting area: see data sheet Please inquire about additional accessories. DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2022, IN STOCK -- Semi-automatic metal bandsaw machine with high cutting precision! With this machine, miter cuts up to 45° on the left and up to 30° on the right are possible (swivel range 45° on the left and 60° on the right) Technical data: ● Cutting range: - 90° round: 280 mm / square: 240 mm / rectangular: 420 x 200 mm - 45° right round: 260 mm / square: 240 mm / rectangular: 260 x 200 mm - 30° right round: 170 mm / square: 160 mm / rectangular: 160 x 160 mm - 45° left round: 200 mm / square: 180 mm / rectangular: 250 x 100 mm ● Drive power: 0,9-1,5 kW / 400 V / 50 Hz Hsdpsmf T Hpefx Ag Dsfr ● Band saw speed: 35 / 70 m/min ● Saw blade dimensions: 3270 x 27 x 0,9 mm Basic equipment: ● Hydraulic control of the saw frame ● Automatic height limitation of the saw frame via contact sensors ● Easy and convenient clamping of the material via a hydraulic short-stroke cylinder ● Hydraulic cutting pressure regulation ● Simple, continuous adjustment of the saw for miter cuts ● Electrical blade tension monitoring with saw blade breakage control

Condition: new, 1 brand new semi-automatic horizontal band saw machine with double mitre Make: HUVEMA / Beka-Mak, Origin Türkiye Model: HU 230 DGH-4 / BMSY 230 DGH Technical data: Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Semi-automatic operation • Hydraulically clamping vice via foot pedal • Mitering on both sides using a swivel frame o The material to be sawn remains straight in space! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Hydraulic vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle, after sawing the arm moves back up automatically and the vice opens • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Emergency stop switch • CE-compliant Hfodpfx Aevyidmsg Dor Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: like new (used), PILOUS - ARG 260 Plus Bandsaw mitre cutting left & right Ø 260 Optional roller conveyor D-300 x 2000 mm = EUR 550(6 rollers / 60 diameter / 300 Kg load 1 Mtr) Optional roller conveyor D-300 x 3000 mm = EUR 650(10 rollers / 60 diameter / 300 Kg load 1 Mtr.) Capacity 90°: 260° Cutting flat 90°: 300 x 200mm Capacity L 45°: 175° Capacity R 45°: 200° Cutting speed Vario:35 + 70 Circle blade size: 2880 x 27 x 0,9mm Hfodpfxewvkato Ag Der Power: 1,4kW Length: 1900mm Width: 1800mm Height: 2000mm

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering Hjdoxaatbepfx Ag Dsfr - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable Hfjdpfeilg Hdsx Ag Dor standard equipped with: - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically after the end of the cut, it returns to the starting position stops the saw band and opens the vice. - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Monitoring of saw band tension, electromechanical - Chip clearing brush - Measuring stop with scale 1.000 mm - coolant device - Operating instructions

Condition: new, Year of construction: 2025, Fully hydraulic lowering and raising function of the saw frame Hydraulic opening and closing of the vice Shutdown after cutting, return of the saw arm to its starting position Torsion-resistant saw frame made of cast steel (multi-ribbed) Hydraulic short-stroke cylinder for the vice Precision-ground carbide saw blade guides, adjustable Electric coolant pump Manual blade tension with display, including electric saw blade and cutting pressure monitoring Hydraulic vice (opening and closing) Revolving chip removal brush Large, solid round support table, rotating for miter cuts with a predefined cutting channel, manual miter adjustment, readout via scale 500 mm material stop with scale Including combi-toothed saw blade 4/6 Machine color: - Saw frame RAL 7035 Hfjdpfxscl Tc Aj Ag Dsr - Machine body RAL 7005 Motor: 400 V three-phase, frequency-controlled, 1.5 kW Saw blade dimensions: 2910 x 27 x 0.9 mm Flywheel diameter: 325 mm Cutting speed: 20-120 m/min. Vice clamping width: 320 mm Working height: 760 mm Sawing range: at 0° = round diameter 250 mm, square 240 x 240 mm, rectangle 320 x 190 mm Machine dimensions (W x D x H) 1480 x 1700 x 2000 mm Weight: 420 kg Please inquire about additional accessories. DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Hodpfx Aefibfajg Dsfr 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from

Condition: new, Year of construction: 2023, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, cutting height (max.): 150 mm, BERG+SCHMID GBS 250 Super AutoCut double mitre bandsaw Speed: 18-110 - Mitre left 60° + right 45° - Sliding quick clamping vice - Solid vice + machine casting - Ball bearing rotary table - Hydraulic brake cylinder - Solid, large material support - Automatic cooling system - Worm gear running in oil bath - Closed saw frame - Adjustable ball roller bearings - Tool compartment - door in the base - Cut monitoring by ammeter - Cutting pressure feed regulator - Support roller (infeed side) - Machine base (supplied disassembled) GBS 250 Super AutoCut 3-stage system: I. Automatic lowering of the saw frame via the hydraulic cylinder, infinitely adjustable feed, with limit switch at the end of the cut II. high-speed lowering of the saw frame to the workpiece, then switch to normal saw feed. (e.g. for scribing) III. Hydraulic cylinder works as brake cylinder: a) Manual operation (e.g. for notching) or b) Lowering in idle state Hsdpfor Ik Sqjx Ag Dsfr Saw blade dimensions: 2765x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: new, Optimum OPTIsaw SD 351 AV Semi-automatic double miter metal band saw With Siemens inverter drive. Professional and robust saw with a cutting capacity of up to 350 mm Description: Heavy industrial design Quiet running Manual or semi-automatic operation Infinitely adjustable saw band speed from 0-80 m/min. High cutting accuracy thanks to vibration-free operation Miter adjustment up to 60° by swiveling the entire saw frame With high-quality bi-metal saw blade as standard End stops adjustable to the degree chip brush Micro switch for automatic limit switch Roller support adjustable for long and heavy workpieces coolant pump Ball-bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed using the feed control valve on the control panel Generously dimensioned, hydraulic quick-release vice, self-closing, adjustable for large cross-sections Fully equipped machine; The user can work productively immediately after commissioning EMC class C2 2-channel safety chain with emergency stop Converter Siemens Sinamics G110M Functionality semi-automatic operation Closing the vise and activating the motor Lowering the saw frame for cutting The motor stops and the saw arm returns to the starting position Technical specifications: Dimensions and weights: Length (product) approx.: 1935mm Width/depth (product) approx.: 1425mm Height (product) approx.: 1626mm Weight (net) approx.: 600kg Electrical data: Power drive motor: 2.2kW Connection voltage: 400V Mains frequency: 50Hz Engine power hydraulic pump: 1.4kW Engine power coolant pump: 50W Total connection value: 3.8kW Machine data: Saw band speed(s): 15 - 100m/min Speed levels: continuously adjustable Saw band length: 2925mm Saw band width: 27mm Saw band thickness: 0.9mm Cutting angle: -45 – +60° Manual operation: hydraulically via push button Semi-automatic operation: automatic Cutting areas: Cutting range 0° round (solid material): 270mm Cutting range 0° square (full material): 230mm Cutting range 0° standing rectangular (solid material): 230 x 350mm Cutting range -45° round (solid material): 230mm Cutting range -45° square (full material): 170mm Cutting range -45° standing (solid material): 140 x 200mm Hsdpfedc H Ukex Ag Defr Cutting range +45° round (solid material): 230mm Cutting range +45° square (full material): 200mm Cutting range +45° standing rectangular (solid material): 210 x 220mm Cutting range +60° round (solid material): 140mm Cutting range +60° square (full material):140mm Cutting range +60° standing (solid material): 140 x 220mm

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: round 120 mm Hfsdpfx Agow U U Uws Der capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: flat 110 x 110 mm vice 285 mm turning speed range: 36 + 72 m/min dimensions of saw-band 2950 x 27 x 0.9 mm Control MEP NC coolant tank 95.0 l total power requirement 1.5 / 1.8 kW weight of the machine ca. 435 kg dimensions of the machine ca. 1000 x 2000 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRY) - With miter cuts up to 60° - MEP EVO microprocessor control for controlling all functions * Front right, rotatable - Optional manual or automatic saw bow lowering * Continuously adjustable saw bow lowering - Saw blade guide made of carbide plates - Hydraulic saw blade tensioning - including digital value display - 2 saw blade speeds - 1 bi-metal saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating instructions in German Functioning of semi-automatic operation: - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vise

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW Hfodpsfh R Tyjfx Ag Djr

Condition: new, Year of construction: 2024, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, cutting height (max.): 150 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min - Mitre left 60° - For cutting steel, stainless steel and aluminum profiles - Quick-clamping vice with quick-clamping device a. - Built-in blade tension control b. - Saw blade guide made of carbide c. - Electric automatic cooling system - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut Hedpfx Agst I R Eds Djfr 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed 3. manual operation - hydraulic cylinder works as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: new, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models on request ! Motor power 1,5/1,8 kW Bank opening 285 mm belt dimensions 2950x27x0,9 mm Weight 485 Kg Speed 36/72 m/min. cutting surface 0° 250 / 220x220 / 280x220 cutting surface 45° right 230 / 200x200 / 220x200 Cutting area 45° left 200 / 170x170 / 200x140 Cutting area 60° right 120 / 80x80 / 140x80 Cutting area 60° left Description Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic manual function, has MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At cycle start occurs: - Vise closes and motor starts - Saw head lowers for cut - Motor shuts off - Saw head raises - Vise opens. Semi-automatic dynamic system (manual lowering of the saw band to the desired position and cycle start via the manual button). Some features: New centralized control panel on articulated arm to allow the operator to easily switch from any working position. Control panel with low voltage: Membrane keypad in polyester with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in user language). * Alarms (description of alarm causes) * Status of inputs and outputs * Counting of the cuts * Time used for the performed cut * Current consumption of the saw band motor * Saw band tension * Saw band speed * Numerical display of the head position. Switch handle IP55 of the manual 24 V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for particular applications. New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. Large work surface with turntable mounted on roller bearings, of 265 mm with preloaded thrust bearing. Double speed of the belt (36/72 m/min.) with control. Provided for the inclusion of an electronic inverter for the continuous regulation of the band speed from 20 to 90 m/min. Stroke of the saw bow programmable directly from the control panel, for adaptation to the material to be cut. Clamping device laterally movable to the left and right, with quick-action vice. Manually operated band tension control with display on the screen by means of electronic converter. Base frame with extendable coolant tray. Electric coolant pump for cooling and lubrication of the saw band. Preparation for the installation of the minimum lubrication kit of the saw band (optional), in addition to the conventional standard lubrication with emulsion oil. Hfjdpfxscgbq Io Ag Der Chip clearing brush. The machine is designed for lift truck transport. Length stop for cuts of the same length material support arm with roller, for fixing the loading platform Bimetal saw band for solid and profiled material. Tools and instructions for use in the user's language. For further technical data, please refer to the attached PDF document.

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Hodpfx Agjg S Ui Aj Djfr