Used Bale presses for sale (214)

Year of construction: 2010, Condition: like new (used), 3- 400 V 7,5 kW Crelnjhwi Dbs Nr Dyob 15,5 A

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, Functionality: fully functional, pressing force: 78 t, bale weight: 600 kg, filling opening width: 750 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), net weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Csln Nr Devgrh Ueyerb Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Croln Nr Dsur Raveyob Year of construction: 2013 The equipment is incomplete and is sold as a part Fault: Hydraulic pump missing Control is missing Power supply unit missing

Condition: excellent (used), Year of construction: 2018, Two balers, Bramidan X30 - second-hand - : Price (for both together) ex location: 17.500.-€ (net) Crelnstq Hrie Nr Dysb Please note that one of the two balers has to be repaired - there is a cost estimate of approx. 1.500.-€ (net)! Manufacturer: Bramidan Type: X30 AD Machine number PEY395533 (second number on request) Year of construction: 2018 Pressing force: 30 t Bale size: WxDxH (mm) 1200 x 800 x 1000 FILLING OPENING: WxH (mm) 1090 x 655 BALE WEIGHT: Cardboard (kg) 275-350, plastic film (kg) 325-425 Recyclable material types: Cardboard, plastic film, paper, PET bottles, aluminum cans, tin cans, hard plastic, textiles, styrofoam. 3 x 230 - 400V, 50Hz, Amp: 25/16 db: 59-60 Weight: 1.650kg Condition: good - very good Available: immediately Location: 21465 Reinbek

Condition: reconditioned (used), Year of construction: 2018, Functionality: fully functional, For sale: Vertical baler Dixi 60S Year of manufacture 2018 tested, serviced and fully functional Several machines are available. Year of construction 2010-2019 Hydraulic door closer/opener Tying with wire Automatic opening of the filler flap Automatic pressing when closing the filler flap Hydraulic bale ejector Overall height 217cm = no assembly required when setting up Technical data Motor: 7.5 kW Supply voltage: 400/50 V/Hz Pressing force: max. 600 kN Cycle time: 36 s Pressing time: 16 s Filling opening W x H: 116 x 55 cm Height from floor: 118 cm Bale ejected W x H x D: approx. 120 x 80 x 110 cm Bale weight*: max. 340 - 500 kg Dimensions W x D x H: 189 x 140 x 217 cm Cjln Njq Tb Azor Dysrb Weight: 2430 kg Commercial offer - sale only to traders Offer prices are net prices Invoice + VAT We will gladly prepare an offer incl. delivery

Condition: new, SLR 50 TN CONTACT FOR DETAILED INFORMATION Croln Nrovfp Ngs Dyjb

Condition: used, Year of construction: 1995, Baler HSM 75 VL , Vertical baler Size (H x W x D): 215 cm x 82 cm x 110 cm Weight: approx. 650 kg Power supply: 400 V, 50 Hz Power: 2.2 kW Year of construction: 1991 Dow07D Pressing force: 90 kN Bale size (H x W x D): 60 x 90 x 55 cm Bale weight: 70 to 120 kg (depending on material) Price: 1400 Euro net / 1 piece If you have any questions, please do not hesitate to contact me. Delivery by arrangement and surcharge possible Prices net 1400 Eur . ex stock 85107 Baar-Ebenhausen. Colnevf Ewmj Nr Dysrb Invoice with VAT will be issued.

Condition: reconditioned (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, system pressure: 250 bar, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. Colnotvat Ts Nr Dysrb After refurbishment, this baler is sold with a 2-year warranty.

Condition: defective spare-parts repository (used), Year of construction: 2016, Manufacturer: HSM Tip: HL 4809 Re The device is incomplete, for sale in the condition shown, defect: Check: incomplete Power supply unit is missing The hydraulics of the main motor are missing Celn Nreur N Uxs Dyjrb For sale as a spare part

Condition: used, Year of construction: 2011, machine/vehicle number: 340000674, The HSM V-Press 403 baler is a compact solution for the efficient compaction of waste and recycling materials. This used baler offers excellent performance and is ideal for companies looking to optimize their waste management and save space. With its robust design and user-friendly operation, it is perfect for use in various industries. Technical details: Machine no. 6113.114 Serial number 340000674 Pressing force: 33 kN Power supply: 400 V / 50 Hz Dimensions: approx. 1,200 x 800 x 1,500 mm (L x W x H) Output: 1.1 kW Colnounzn Ns Nr Dysrb Rated current: 2.6 AMP Year of construction: 2011 Weight: approx. 300 kg

Year of construction: 1982, Condition: good (used), machine/vehicle number: 14320, Vertical Baling Press Csln Nreiuky Ij Dysrb

Condition: reconditioned (used), Functionality: fully functional, We offer numerous used and tested spare parts for Dixi presses 60 and 80 SLD and SLS. Photos are only examples. Crolsvfnfmjn Nr Dyob

Condition: excellent (used), Year of construction: 1990, operating hours: 25,000 h, Functionality: fully functional, machine/vehicle number: 24.955, bale weight: 600 kg, Equipment: documentation/manual, Baler type KONTI-275 B - Performance, reliability and efficiency in material compaction Discover the KONTI-275 B baler, the ideal solution for efficient waste management of plastic, cardboard and other recyclable materials. Designed for maximum performance, this industrial baler is perfect for companies looking to optimize storage space and reduce waste volume. Key Features: Impressive pressing force, with a capacity of up to 200 bar, ensuring materials are efficiently compacted in a short time. Variable bale weight ranging from 20 to 600 kg, depending on material processed and pressing settings. Advanced hydraulic system utilizing ISO VG 68 hydraulic oil, guaranteeing constant and efficient operation even under heavy use. Compact and sturdy dimensions, optimized for industrial premises, with varied feeding options and workflow adaptation. Automation and safety: the press is equipped with a fully automated system that ensures easy and safe operation, reducing the risk of breakdown. Benefits: Crjln Neuqxpcjr Dyob Significant waste volume reduction, saving space and transportation costs. Fast and efficient operation thanks to full automation and seamless operation. Minimum maintenance with clear service recommendations to ensure long equipment life. Versatility: can be used for various materials, from plastic and cardboard to other recyclable waste.

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. Crsln Nr Djtvau Ajyeb General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: good (used), Manufacturer: HSM Tip: HL 4010 Re Basket tilt arm missing, Crjln Nrour N Huo Dyeb

Condition: good (used), Year of construction: 1993, pressing force: 60 t, bale weight: 500 kg, filling opening width: 1,050 mm, filling opening length: 1,500 mm, bale length: 1,200 mm, total length: 6,661 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 12,000 kg, oil tank capacity: 800 l, year of last overhaul: 2023, Equipment: documentation/manual, HSM VK 6015 automatic channel baler I offer for sale a baler that worked for me for more than 4 years. Previously worked in a warehouse in DE, came to us in original condition. Currently dismantled, but it will be possible to start up before purchase. Optional equipment: Pre-crush flap, excess material knockout, oil cooling upgraded to a large radiator, cabinet and tank heating, wire end, bale binding sound. After disassembly replaced: Tying system (replaced all bearings, chains, sprockets, new tying heads upgraded to new HSM type, new needles) It is possible to purchase the machine with ascending belt feeder without channel. Crsln Nroudzv Ds Dyob Crushing force: 600kN /. Unit pressing force: 106 N/cm² Drive power: 50 kW Voltage / frequency: 400 V / 50 Hz Work cycle time: 17 s Year of manufacture 1993 Capacity when working with cardboard 3t/h at a density of 30kg/m3 187 m3/h Bale weight depending on material 400-550kg Depth x width of loading opening: 1020 x 1500mm Bale width x height x length: 1100 x 750 x 600-1200 mm Total length x width x height: 6661 x 3994 x 2583 mm Machine weight: 12 t Type of consumables: wire Pressed material: film, mixed paper, cardboard, die-cutting machine waste, Oil tank capacity of 800l

Condition: good (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: S80001419, Excellent condition paper press DIXI 60S made in Germany only one left, the price does not include transportation or any extra costs. Crsln Nrjvd A Uas Dyob

Condition: excellent (used), Year of construction: 2010, ZENTEX PPH 5 baler is a device for compacting and crushing cardboard and foil. The baler makes it possible to reduce the volume of waste material and is ideal for warehouses, wholesalers and logistics companies. The cardboard baler is equipped with a swing door, maximum bale size 70x50x45 cm. Pressing time including return stroke 23 s. Advantages of the Zentex PPH 5 carton press: - Reduced volume of waste going to recycling - Saves time spent on waste management - Equipped with a module to compact paper and film - Prevention of space restriction by stored cardboard and foil in alleys and aisles. Crolnendcxgo Nr Dyjb The offer concerns the Zentex PPH5 waste paper and film baler : - Manufacturer: ZENTEX - Product condition: used - Year of manufacture : 2010,2012,2013 - Model: PPH5 - Width: 84 cm - Depth: 72 cm - Height: 207 cm - Weight: 360 kg - Power: 1500 w - Voltage: 400 v Net price : 1890.00 euro each year of manufact. 2010 (Product code: MTP000234) 1990.00 euro each year of manufact. 2012 (Product code: MTP000235) 2090.00 euro each year of manufact. 2013 (Product code: MTP000236) The Zentex PPH 5 cardboard compactor is a professional device that effectively reduces waste. It bales waste into ready-to-collect bales, which are double-bound by strapping. The baler is ideal for companies with small quantities of waste, small wholesalers, food shops and clothing shops. * Large quantities available, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: excellent (used), Year of construction: 1991, Baler BOA 45 K Baler BOA 45 K 1 Description, Technical data baler: Manufacturer BOA Type 45 K Year of construction 1991/ 2013 completely overhauled and renewed the PLC Press power main press 70 tons Feed channel 1,500 x 1,000 mm Volume press space 1,7 m³ Theoretic cycle time 18 seconds Bale size 700 x 1,150 mm, length variable Driving motor 2 x 18,5 kW Connected load 60 kW Tying system 4-fold vertical, 2-fold horizontal, fully automatic Throughput rate 6 up to 10 tons/hour, depends on material Crsln Noqhnw Asr Dyjb Bale weight 500 up to 600 kg, depends on material PLC Unitronics EX-D16A3-T016 Volume hydraulic oil tank 800 l Transport dimensions only baler 9,800 x 2,250 x 3,200 mm (l x w x h) Machine weight baler approx. 18 tons Condition: The press was completely overhauled in 2013, provided with a new PLC and is in a good condition. Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2012, Functionality: fully functional, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm The weight of the equipment is 2,030 kg Croln Nr Djttay Tjyob

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, pressing force: 40 t, bale weight: 400 kg, filling opening width: 1,400 mm, filling opening length: 860 mm, bale length: 1,200 mm, total width: 1,330 mm, total length: 4,600 mm, type of input current: three-phase, bale height: 1,000 mm, bale width: 800 mm, overall weight: 6,500 kg, year of last overhaul: 2023, operating pressure: 200 bar, tank capacity: 280 l, cutting force: 40 t, ABT 4000V automatic channel baler For sale channel baler with automatic binding. The machine in our use for 3 years, currently works with a conveyor and has a modified enlarged hopper. It bales cardboard foil, we are selling because we need a larger machine. Since the purchase in the machine has been replaced hydraulic oil, part of the hoses, two new pumps with modification, one preliminary fast the other main, which allows to definitely speed up binding. The machine also had its keel sliders replaced currently fully operational does not require repairs. It has additional equipment, i.e. a knockout/scraper for excess material. Ele. cabinet modernized in 2005. New pumps 2 pcs. in 2022r New oil in 2023r New sliders in 2022r overhaul of needles Machine fully operational, Manufacturer ABT 4000V Main motor 15kW Binding motor 3kW Pump 200bar Cjln Nr Doudzuaeyerb Oil tank 280l Weight 6500kg Length 4600mm, width 1330mm Channel dimensions 1000-700mm Bale weight 300-500kg depending on the material The baler has applied a unique solution of the possibility of its transport by hooklift. I have the original DTR in DE ora translation PL

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 1003203664, Four pieces HSM V-PRESS 1160 & one piece DIXI 60S slightly used the price is per piece Colnoul Uhke Nr Dyjrb

Condition: good (used), Year of construction: 2011, Functionality: fully functional, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Creln Nr Dettaytsyob Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm Bodhzadl7zw The weight of the equipment is 2,030 kg

Condition: good (used), Year of construction: 2013, Compressive force 548 kN Crjlnsttav Ne Nr Dyob The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm Bodhzadl7zw The weight of the equipment is 2,030 kg

Condition: good (used), Year of construction: 2012, Functionality: fully functional, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Celnottal Aj Nr Dysrb Dimensions 1,797 x 1,062 x 2,985 mm The weight of the equipment is 2,030 kg