Vertical machining center

YCM NXV1680A

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Lodetycg Sjpfx Ac Ijab Year of construction: Approx. 1981

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 Laodpoyyybhefx Ac Isb X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 - including chip conveyor - coolant tank - immediately available Laodpfxjv S Svve Ac Iob

Condition: excellent (used), Year of construction: 2007, operating hours: 8,000 h, functionality: fully functional, turning length: 750 mm, turning diameter: 330 mm, spindle bore: 41 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, spindle motor power: 11,000 W, quill diameter: 50 mm, quill stroke: 110 mm, turning diameter over bed slide: 435 mm, overall weight: 1,400 kg, center height: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale is a cycle-controlled WEILER E30X750 CNC lathe with a Siemens 810 D control. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control: Siemens 810 D Condition: good, fully functional Location: Austria (Graz) Inspection: on-site or via video call by arrangement Pictures/Video: Additional pictures and videos of the machine in operation will be provided upon request. Technical data: Working area: Center height: 165 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 160 mm Distance between centers: 750 mm Turret: Turret according to DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter in the front bearing: 70 mm Max. torque on the turret: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 min⁻¹ Number of speeds: stepless Feed / Rapid traverse Feed drive: Three-phase AC feed drives Feed range (stepless): Ljdsvphv Tspfx Ac Ioab longitudinal: 0.001–50 mm/rev (Note: additionally stated 0–20 mm/rev) lateral: 0.001–50 mm/rev Feed force: longitudinal: 6,000 N lateral: 3,000 N Max. rapid traverse speed longitudinal/lateral: 8 / 4 m/min (Note: additionally stated 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 threads/inch Tailstock / Quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / Weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Contact us for further information and to arrange an inspection.

Condition: used, Thread rolling machine ORT RP30U 2-roll 30 ton swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Lsdpfx Ast H Ty Uoc Ieab Power (Ton): 30 Number of rollers: 2

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details shown on picture. Ledjrpn Dvspfx Ac Isab

Year of construction: 2001, condition: ready for operation (used), A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1997. The line has no base boards. 8) Stone finisher Omag S22 140-90, year of manufacture: 2001. Documentation available. An on-site inspection is possible. Laedpfsw R Uziox Ac Ijb

Condition: good (used), Year of construction: 2005, Horizontal machining center Machine type: Mori Seiki NH 8000 DCG Control: Fanuc 18 imb + Mapps 2 Year of construction: 2005 TECHNICAL DATA: Travels: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Rapid traverse: (X/Y/Z): 50 m/min. Speed range: 10,000 1/min. Drive power: 30 / 25 kW Tool holder: BT 50 Tool changer Tool places: 140 Pallet system Number of pallets: 2 Ljdpev Nhylofx Ac Isab Pallet size: 800 x 800 mm Machine weight: 32,000 kg Space requirement (LxWxH): 9.200 x 4.900 x 3.920 m Equipment features: Internal cooling (IKZ): bar Chip conveyor High pressure pumps

Condition: good (used), Year of construction: 2013, grinding diameter 140-355 mm grinding length 3000 mm centre height 260 mm Lajdpfx Acjynmpyj Iob weight of the machine ca. 8,3 t dimensions of the machine ca. 8500 x 3500 mm SA 6Ux3000 external cylindrical grinding machine Year of manufacture: 1981 Retrofit: 1 x 2013 SERWEMA Maximum grinding diameter with tailstock: 140 mm Maximum grinding diameter without tailstock: 355 mm Maximum grinding length: 3,000 mm Center height 260 mm Workpiece weight max. 500 kg Machine footprint 8500 x 3500 mm Machine weight 8500 kg

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool Lasdpfx Acex Rkvqe Ijb ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI