Center lathe

XYZ Machine Tools 1550VS Centre Lathe

Condition: new, New lathe with large spindle bore. Brand : KMS Type : CS6250C TDC : 1000mm Bljdpehhm Edjfx Ab Tsr Turning diameter over bed : Ø 500 mm Turning diameter over slide : Ø 300 mm Turning diameter in bag : Ø 710 mm Turning length in bag: 240 mm Bed width : 390 mm Spindle diameter : Ø 105 mm Spindle speeds : 12 (36 - 1600 rpm) Tailstock spindle diameter : 75 mm Tailstock range : 150 mm Tailstock recording : MC 5 Machine dimensions : ± 2630 x 975 x 1270 mm (L x W x H) Machine weight: ± 2100 kg Machine equipped with: - Longitudinal and transverse feed. - Rapid traverse on longitudinal and transverse feed. - Movable and adjustable stops for automatic longitudinal feed. - Thread cutting shaft (Metric/Inch/Module/DP thread cutting possible. - Multifix type quick change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock). - 4-jaw chuck Ø 400, bore 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Steady rest Ø 120- Ø 260 mm. - Follow rest Ø 20 – Ø80 mm. - Coolant device.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 5,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, technical inspection anytime after appointment Technical data: - distance between centers/turning length: 5000 mm Bledpfewk Iq Eex Ab Ter - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 1800 mm height: 1800 mm total weight: 7300 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Blsdpfxsw Dcccs Ab Tsr

Condition: new, The Sinus 400/1500 D, a top-tier model in the Conventional Horizontal Lathes category and part of the Engine Lathes product group, exemplifies robust engineering and innovative design. KNUTH has crafted this universal lathe with a sturdy one-piece cast machine bed, ensuring high accuracy and low-noise operation even at elevated cutting power. The lathe features a removable bridge allowing machining of large parts with diameters up to 1035 mm, alongside rapid feed capabilities across two axes for swift positioning. Additional highlights such as its manual multi-disc clutch, hardened guideways, and well-designed safety functions further enhance its performance and reliability in various machining applications. This Engine Lathe is equipped with essential accessories like a 3-axis position indicator and a comprehensive toolset for operator convenience. For those looking for a high-performance lathe capable of handling demanding tasks, the Sinus 400/1500 D is the optimal choice – request a quote today! Bsdpfxsq Rdp As Ab Telr

Condition: new, Parallel lathe with display Fervi T075/400V3A. Monoblock cast iron base. Height of Centers 230 mm Max. diameter on Bench 460 mm Blodpovbqv Hjfx Ab Tor Max. diameter on Carriage 270 mm Max. diameter on Slot 690 mm Tool Height 25 mm Distance between Centers 1500 mm Distance between Guides 300 mm Bar Taper CM MT7 Bar Passage 58 mm Spindle Attachment Camlock D1-8 Spindle Speed (12)25-1700 rpm Longitudinal Feeds (42) 0.031 - 1.7 mm/rev Cross Feeds (42) 0.014 - 0.784 mm/rev Metric Threads (41) 0.1 - 14 mm Inch Threads (60) 2 - 112 TPI Tailstock Spindle Stroke 130 mm Tailstock Taper CM MT4 Motor 400 V 50 Hz 5.5 kW Coolant Pump 400 V 50 Hz 90W Machine Dimensions 2750 x 1080 x 1370 mm Net Weight 2020 kg Total Dimensions 2870 x 1180 x 1570 mm Gross Weight 2200 kg Accessories Included: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Drive flange Ø350 mm Fixed steady rest Moving steady rest Reduction bushing CM 7 / 4 Fixed tailstock CM 4 Rotary tailstock CM 4 Thread comparator Turret guard Spindle guard Rear splash guard Quick change turret type B LED lamp Cooling system Electromechanical foot brake Bathed carriage gears oil Quick-lock tailstock carriage

Condition: new, Year of construction: 2023, functionality: fully functional, center width: 390 mm, center height: 310 mm, overall weight: 61 kg, input voltage: 230 V, spindle speed (min.): 50 rpm, spindle speed (max.): 3,500 rpm, spindle mount: MK 2, power: 0.75 kW (1.02 HP), - Fully cast headstock, tailstock and support for smooth running. - User-friendly operation of the cast iron hand rest. - Induction motor with high torque even at low speeds. Bljdpfx Aetuuv Neb Ter - Digital speed display. - Hardened steel edge of the hand rest. - 24-step division for locking the workpiece. - Storage compartment means you always have your tips to hand. - Drive-out mandrel and wrench for tightening the clamping disk. - Pre-drilled holes for lighting the headstock. - Easy mounting of accessories: stand, extension, lighting and mobile base frame. - Machine bed width is 160 mm! Medium-sized LAGUNA 1216 lathe is characterized in particular by its robust elements: Cast iron headstock, tailstock, precisely ground bench bed and tool rest with resistant edge made of hardened steel. Another highlight: ergonomic control panel made of anodized aluminium with duralumin speed control. Working speeds: 50-525, 325-1750, 650-3500 rpm. Stepless speed control with duralumin regulator and change between three gear ratios with a simple lever mechanism. The motor technology ensures high torque even at low speeds. Locking the tailstock at the rear: it does not interfere with work, but is still easy to reach. Ergonomic handles with eccentric lock for a very firm grip. - Type: REVO 1216 - Recommended use: Professional production - Power (230 V): 750 W - Speed: 50-525, 325-1750, 650-3500 rpm - Max. Machining diameter over guideway: 310 mm - Center distance: 390 mm - Spindle thread: M33 × 3.5 mm - Headstock / tailstock taper: MK2 / MK2 - Tool rest / tailstock bore: 17 / 17 mm - Quill adjustment: 63 mm - Hand rest shank size: 25.4 mm (1") - Length × width × height: 750 × 226 × 442 mm - Weight: 56.3 kg - Length x width x height: 750 × 226 × 442 mm - Weight incl. packaging: 61 kg - Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: - Driver tip - center point - face plate - Hand rest - Punch with brass tip - Key for spindle lock

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available with distance between centers also 2000 and 3000 mm. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 280 mm Max. diameter over bed 560 mm Max. diameter over carriage 360 mm Max. diameter over pocket 770 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1400 x 1500 mm Net weight 2920 Kg Gross weight 3555.00 kg Bjdjvbquispfx Ab Telr Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Bjdpfx Asvzmtzob Tjlr Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Blsdpfju St S Ajx Ab Tsr Availability: immediately Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg

Condition: new, ELMAG INDUSTRIE 1000/230 HD Universal center lathe 88173 incl. RÖHM lathe chuck incl. 3-axis position indicator incl. quick-change steel holder 'Set', Multifix system Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out Heavy lead and feed spindle lathes, 5,500 watts: The quality of the INDUSTRIE 230 HD models becomes clear as soon as you switch them on: barely audible drive noise. No vibrations at large cutting depths. In fact, at 2,635, 2,835 and 3,055 kg, the 230 HD models are the heaviest in their class and, thanks to their extremely robust design - e.g. high-frequency hardened prismatic guides - are ideally suited for heavy-duty and continuous operation. At 80 mm, the 230 HD offers an extra-large spindle bore for processing bar stock up to 2 1/2 inches in diameter (76.1 mm). A turning size via slides of Ø 290 x 1,000, 1,500 or 2,000 mm and a maximum turning diameter of 460 or 700 mm leave almost nothing to be desired for machine, steel, plant and tool construction - as well as 12 speeds for 170 longitudinal and cross feeds and 150 leadscrew pitches for metric and inch threads. Standard equipment: - including digital position indicator - RÖHM three-jaw lathe chuck Ø 250 mm Bjdpfx Ajtw Dxkjb Telr - Four-jaw faceplate chuck Ø 315 mm - Clamping disk Ø 350 mm - 2 fixed centers - Rotating center point MK 5 - Moving steady rest - Steady rest - Quick-change steel holder set, 5-piece MB - Thread gauge - Halogen machine lamp - Emergency stop button / zero voltage release - Rotating chuck guard with safety switch - Underframe / chip tray / splashback - Tool kit / operating instructions / CE Special accessories: - Insert turning tool set 25 x 25 mm, 7-piece - 7-piece insert set for turning tool set 25 x 25 mm - Turning tool set 'Camlock' 25 x 25 mm, 7-piece - Cut-off tool holder 25 x 25 mm, length 150 mm - Cutter for cut-off tool holder 25 x 25 mm ADVANTAGES: - 'CE' compliant machines with maximum safety and machine accuracy in accordance with DIN - Powerful and robust for trade & industry - Coolant tank and pump integrated in the machine base TECHNICAL DATA: Center width 1000 mm Center height 230 mm Turning diameter over bed 460 mm Turning diameter over slide 290 mm Turning diameter without bridge 700 mm Machine bed width 340 mm Bridge length 200 mm Cross slide travel 280 mm Top slide travel 100 mm Turning tool cross-section, max. 25x25 mm Lathe chuck holder D1 - 8 Spindle holder (turning spindle) MK 7 mm Spindle bore 80 mm Speed 25 - 1800 rpm Speed steps 12 Longitudinal feeds (170) 0.04 - 2.46 mm/rev Transverse feeds (170) 0.02 - 1.23 mm/rev Metric thread dimension (24) 0.5 - 20 mm metric modular thread (20) 0.25 - 10 mm Inch thread, threads G (61) 1-5 / 8 - 72 G/' Inch modular thread, threads G (45) 3-1 / 4 -96 G/' Lead screw pitch 6 mm Lead screw diameter 40 mm Quill holder MK 5 Quill diameter 75 mm Quill travel 130 mm Motor power 5500 W Coolant pump 40 W Mains connection 400/50 V/Hz Length (total) 2310 mm Height (total) 1255 mm Weight 2635 kg