Folder closer

Wuko 1004

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Ksdpfx Aog U Utvshvsdi Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: new, Year of construction: 2025, SPIRAL DUCT PRODUCTION MACHINE Metformer MTF 1602 TUBEFORMER Designed for the production of round SPIRO-type ducts. The produced duct complies with DIN EN 12237, BS, and Eurovent standards. Features: Coil decoiler with vertically adjustable brake Forming strips for duct production Burr-free high-speed cutting with circular cutting blades LCD touchscreen control Automatic lubrication system Automatic cutting during duct production Production reporting system (daily-weekly-monthly output) Automatic error detection Technical Data: Diameter range: 80–1600 mm Thickness range: Galvanized steel: 0.4–1.2 mm Stainless steel: 0.4–0.7 mm Aluminum: 0.4–1.3 mm Strip width: For 0.4–1.0 mm thickness: 137 mm For 1.1–1.3 mm thickness: 140 mm Production speed: 60 m/min Motor power: 11.25 kW Beading: Smooth, single or double Lock: External lock Cutting system: Circular cutting system Weight: 2900 kg Machine dimensions: 1900 × 2050 × 1500 mm Decoiler dimensions: 1780 × 1130 × 1250 mm Table dimensions: up to 2700 × 950 × 1200 mm Operating Environment: Power supply: 3-phase, 380V, 50Hz Clean surroundings Kjdpfx Ahowa Skhevodi Maximum ambient temperature: 40°C Minimum ambient temperature: -5°C Humidity: 55–85% Altitude:

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. Kdsdpem Twnlefx Ahvoi The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, ANAK – MATIC 7 CNC – 3-Axis machining center | HEIDENHAIN TNC 426 | 1000 x 500 x 505 mm. Compact and reliable 3-axis CNC machining center, ideal for precise milling operations. Equipped with high-speed spindle and HEIDENHAIN control. 🛠 Key specifications: • X-axis travel: 1000 mm • Y-axis travel: 500 mm • Z-axis travel: 505 mm • Main spindle: 7.5 kW – 6000 rpm • CNC control: HEIDENHAIN TNC 426 • Number of axes: 3 • Table size: 1150 x 475 mm • Machine weight: 5000 kg ✅ Perfect for: • Small to medium part production. • Job shops and subcontract machining. • Tooling, moldmaking, general precision parts. Kdjdpfjkuz I Nex Ahvei 📌 Ready for immediate delivery. Stable, accurate, and proven – powered by HEIDENHAIN.

Condition: new, Year of construction: 2025, Profile machine MZP-02 2m The MZP machine is used to corrugate sheets to ensure stiffness of thin sheets in the ventilation duct sector. Rolls made of high quality steel can roll 2mm aluminum sheets and 1.2mm black steel sheets. The machine is equipped with transport wheels that allow you to quickly change the location of the machine in the workshop. Kjdpfefwxm Djx Ahvodi Machine Specs: Engine with editor Chain driven roller system Fully welded construction Transport possible thanks to the wheel The pressing force can be easily adjusted with the help of adjusting screws Adjustable intermediate distance between the upper and lower shafts The lower and upper rollers are made of hardened long-life steel A practical machine that can be used by people operating in the ventilation industry for many years. Technical specification MZP-02 2000 Working length: 2000mm Range of processed sheets: 0.40 / 1.20mm Engine power: 0.37kW Length: 2240mm Width: 530mm Height: 1050mm Weight: 360 kg

Condition: used, DALLAN Rollforming machine | Omega profiles 60mm & 80 mm With 11 forming stations, fully equipped and currently set up for Omega 60 mm, the line includes additional tooling for Omega 80 mm profiles. This machine is complete, in excellent condition. DALLAN rollforming line with 11 forming stations: · Maximum sheet width: 300 - 350 mm · Controls: Dual console · Shaft diameter: 60 mm · End unit: Integrated cutting station · Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm · Idle decoiler · Tooling box (approx. 1,000 kg) for producing other profile types · Dimensions: 10,000 x 1,400 x 1,600 mm (L x W x H) · Weight: 10 tons Maximum sheet width: 300 - 350 mm Controls: Dual console Shaft diameter: 60 mm Kedexugf Hspfx Ahvsdi End unit: Integrated cutting station Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm

Condition: new, Year of construction: 2026, Robust, high-quality CNC-controlled double standing seam roll forming machine for roof coverings. Maximum sheet width at the infeed side: 850 mm Maximum material thicknesses: Copper / Titanium zinc / Aluminium 0.8 mm / Galvanized steel sheet 0.7 mm Minimum workpiece length (panel length): 400 mm 2 x 7 forming stations Maximum seam height: 26 mm Infinitely adjustable processing speed up to 15 m/min Drive power: 1.5 kW Power supply as per customer specification: 220V or 400V Kdsdeyf U Npepfx Ahvji Weight: 500 kg - Transverse and longitudinal cutting device - Manual adjustment of the transverse cutting device - CNC-controlled longitudinal cutting with an accuracy of +/- 1 mm Optionally available with a longitudinal stiffening rib unit (for introducing reinforcing ribs)

Condition: good (used), Year of construction: 1980, machine/vehicle number: 27-3, Offer 23317 Technical data: - max. working width 2040 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - Bending angle setting electronically preselectable 0 - 135 ° - smallest bending radius 1.25 x sheet thickness - Smallest inner flange height 6 x sheet thickness - Automatic sequence control for a complete work process - Operation via hand or foot switch - largest opening width / stroke of the upper beam 200 mm - Height adjustability - of the bending beam 80 mm - of the lower beam 80 mm - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 1.5 kW Kjdpfx Asrklfrehvjdi - Manual backgauge can be operated from the front - Space requirement approx. W 3300 x H 1350 x D 1500 mm - Weight approx. 2600 kg

Condition: good (used), functionality: fully functional, Year of construction: 2002, Ajial 3100x125tn CNC Cybelec Press Brake 2023 Brand: Ajial Model: 30125 Year: 2002 Kjdpewnxwqefx Ahvedi Bending distance: 3,100mm Force: 125tn Piston stroke: 200mm Motor: 12.5HP Three-phase 380V Axes: Y1, Y2, X Lower die pistons for compensation. New Cybelec CybTouch 8 control, installed in 2023

Condition: good (used), The machine used for washing fruit and olives is in good condition Kdsdpfsvtf T Dsx Ahvei