Gear hobbing machine

WMW ZFWZ 6300x40

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm max. module 10 (18) min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Axial travel 1.000 mm Tedpoyv Ipfsfx Amyea tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW spindle turning speed range 3.500 - 12.000 U/min tool diameter 320 mm total power requirement 80 kW weight of the machine ca. 25,00 t

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid Tjdpfex Ii Hvjx Amyoa The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0518018, Offer 24600 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. Tedpfx Amjvncfmsysa - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: used, Year of construction: 1973, turning diameter over bed 490 mm turning diameter over slide rest 280 mm turning length 2000 mm centre height 245 mm centre distance 2000 mm spindle bore 62 mm total power requirement 7,5 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 3,78 x 1,17 x 1,42 m Tedpfjtqqvvex Amyea Accessories: 3-jaw chuck 240 mmø, face plate 400 mmø, MULTIFIX-tool post, solid steady, coolant

Condition: like new (used), functionality: fully functional, workpiece weight (max.): 3 kg, feed length X-axis: 100 mm, feed length Y-axis: 100 mm, feed length Z-axis: 200 mm, workpiece diameter (max.): 180 mm, milling length: 200 mm, overall weight: 5,000 kg, rotational speed (max.): 3,000 rpm, rotational speed (min.): 400 rpm, tool diameter: 80 mm, Equipment: documentation/manual, rotational speed infinitely variable, This machine is completely dismantled and rebuilt from the ground up. During the overhaul, it undergoes comprehensive modernization with state-of-the-art technology and the latest premium-quality components. Following refurbishment, the machine is presented in a technical and visual condition equivalent to new – reliable, high-performance, and future-proof. Tjdpox Af A Hsfx Amyoa The equipment and configuration can be tailored individually to your requirements, ensuring maximum productivity in your production environment.

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t Todpfx Amjvr Hgvjyea dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Wire spool dispenser Tedpfsu Afttjx Amyja Lincoln Idealarc DC-1000 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 1000 Amps at 100%. Idealarc® DC-1000 Submerged Arc Welder Input voltage: 230/460 Input current: 193/96.5A Input Hertz: 60 Input phase: 3 Input power: 230/460/3/60 Mode icon: DC/DC Output range: 150-1300A DC,16-46V Polarity: DC Nominal output: 1000A/44V/100%

Condition: used, Year of construction: 1992, spindle speed (min.): 7,500 rpm, spindle speed (max.): 24,000 rpm, 4 motorized grinding spindles (liquid-cooled, purge air / oil mist lubrication) including REFU HF frequency converter, e.g. for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 Tsdpfel Tn Afex Amyea 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as is – manufacturing year approx. 1992 A collection of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request All technical data subject to error or omission. We sell exclusively to countries within the European Community.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111254, MACHINE SPECIFICATION Table size 660mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Approximate weight 3220Kg Tjdpfx Amoyrrx Uoyea MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control Swarf auger Filtermist extraction system 10 off assorted BT40 toolholders Programmable coolant nozzle Automatic lubrication system Lighting Enclosed guarding

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW Tsdpfsxcuicjx Amyja weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted