Hydraulic press

WMW-ZEULENRODA PYE 250 S 1 M

Condition: ready for operation (used), Nominal force: 2500kN, operating pressure: 20MPa, ram speed down/up: 210/110mm/s, ram stroke: 500mm, throat depth: 360mm, max. distance between table and ram: 800mm, rated current: 41A, control voltage: 60V, rated voltage: 380V, connected load: 20.5kW, weight: 8t. An on-site inspection is possible. Fodpexcx Aaofx Ab Tegk

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle bore: 83 mm, turning length: 1,000 mm, turning diameter: 570 mm, turning diameter over top slide: 340 mm, quill diameter: 80 mm, quill travel distance: 200 mm, overall weight: 3,200 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The machine is in very good condition. Fgedpfx Aewxw S Isb Tok Immediately available! Can be tested under power.

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 Fodpowwwqhjfx Ab Tjgk weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Heidenhain TNC 640, total height: 29,620 mm, total length: 32,000 mm, total width: 28,480 mm, table load: 200 kg, rotary table diameter: 380 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 36 bar, Equipment: chip conveyor, documentation/manual, Victor 5-Axis Machining Center VC-AX380 with Heidenhain TNC640 Control 5-axis simultaneous machining incl. calibration tool KinematicsOpt incl. calibration ball. Standard options: -Cooling system with high-pressure coolant pump MTH4-40/4 and supply hoses -Full protection coolant cabin -Spindle oil cooler -Oil separator -Spiral chip conveyor -Rinsing gun and air gun -Operating tools and manuals Additional options: -Air through the spindle Fgodpfx Aeq Tafxjb Tjk -Air conditioning unit in the control cabinet -Chip conveyor -40 tools -36 bar ICS with Mahle Duplex -Table rinsing -Workpiece measurement TS460 -Automatic door -Interface -8" 3-jaw chuck Images are exemplary and may differ. From stock Bergneustadt (subject to prior sale)

Condition: new, Year of construction: 2018, For sale is an unused Rösler FKS 35 Tandem with soundproof cabin from the year of manufacture 2018. The unit is in its original packaging and is available in our warehouse. You are welcome to arrange an on-site viewing appointment by prior telephone arrangement. Fgsdel D Ex Dspfx Ab Tsk

Condition: good (used), Year of construction: 2018, functionality: fully functional, MITUTOYO Contracer CV-2100M4 contour measuring device Horizontal measuring range X = 100mm Fodjvun Tpepfx Ab Tjgk Vertical measuring range Z = 50mm Column travel range Z2 = 350mm Inclination +/- 45° Dimensions (W, D, H) 745mm x 450mm x 885mm Total weight approx. 150kg Incl. PC system, Incl. cross table 218-001 Incl. rotating vice 2028-003

Condition: as good as new (ex-display), 600 Kg load capacity welding rotary table adjustable in height with plate diameter 1000mm height min. 0,65m, max. 1,530m speed from 0,01 - 1,1 rpm inclination up to 135 hand and foot remote control with speed indicator very robust Fgodpfx Aed D D Hleb Tek

Condition: good (used), Robot Manfacturer: Staeubli Fedpfxebrhtdj Ab Togk Type: RX170

Condition: excellent (used), Year of construction: 1997, grinding diameter 80 - 250 mm grinding length 600 mm centre height 175 mm longitudinal feed 750 mm workpiece turning speeds 6 - 600 U/min grinding spindle speed 1500 - 3600 U/min Fgedpfx Asu D I Tleb Tek cross movement - autom. and by hand 320 mm Control Kelco 80 total power requirement kW weight of the machine ca. 4,4 t dimensions of the machine ca. 3,1 x 2,1 x 2,0 m

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Milling Machining Center - Vertical / Brand: DECKEL MAHO / Type: DMC 63V / Year of construction: 1999 The machine can be inspected by appointment under power. Well-maintained and very good functional condition. Spindle replacement: 18.03.2022 Fedpfjv Nxbyex Ab Togk Spindle hours (03/13/2025): 51.206 h The machine has a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/axis drives: - Advancing force X, Y, Z (100 % ED): 6.000 N - Feed rate: 0 - 30.000 mm/min - Rapid feed X, Y, Z: 30 m/min - Diameter ball screw/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z-axis to VDI/DGQ 3441: 0,015/0,010 mm (indirect/direct measuring system) Distance measuring system: - Input unit: 0,001 mm Working spindle: - Drive power (40/100 % ED): 13/9 kW - Torque (40/100 % ED): 83/57 Nm - Speed range: 1 - 10.000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12.000 N Tool magazine: - Tool changing system: Pick-up - Number of magazine positions: 24 - max. Tool-Ø with vacant neighboring spaces: 80/140 mm - max. Tool length: 300 mm - max. Tool weight: 7 kg - Chip-to-chip time: 6,5 sec - Rotational speed/tool magazine: 47 rpm - max. Maximum loading weight of the tool magazine (24 x 3 kg): 72 kg Machine/Working table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (set-up weight): 500 kg - Loading height: 850 mm - max. Workpiece height (at max. tool length): 240 mm EQUIPMENT: - CNC-Control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - Internal cooling through the spindle, 15 bar - Coolant system (emulsion) - Electronic hand wheel - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -