Single Column Press - Hydraulic

WMW ZEULENRODA PYE 40 S1

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 40 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 380 mm, oil tank capacity: 300 l, total length: 1,150 mm, total width: 1,750 mm, total height: 3,050 mm, overall weight: 3,200 kg, distance between stands: 800 mm, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. Hnjdpfx Aewbt Uqoa Ejp The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: used, pressure 55 t throat 250 mm stroke 10-90 mm Hodpfx Aascp Apyo Eenp table-size 640 x 495 mm no. of strokes 120 Hub/min ram adjustment 55 mm ram surface 290 x 210 mm ram hole 40 H7 mm hole in the table 220 x 190 mm T-slots 22 clamping plate 620 x 485 x 65 mm total power requirement 4,5 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 m

Condition: refurbished (used), 50 m³ / 50,000 l fire water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked and driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blind cover, gasket and screws. Available new or used, immediately! The container has been emptied, cleaned, completely overhauled and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire hose coupling / fixed coupling A according to DIN 14319 in form B, without a level gauge connection - Vent flange stub in DN 100 with cap, with a total length of approx. 1,300 mm, suitable for 800 mm of ground cover and 500 mm above ground Hnedpfx Aohh Sproa Esp - Externally coated with bitumen for protection - If required, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will immediately receive the exact freight costs. Inspection is possible at any time by prior appointment. We can also offer trade-in and purchase of tanks/containers of all types. Please contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke Hnodpswp Nv Hsfx Aa Eep 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm Hnsdpevc Awxofx Aa Esp mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm Hnjdpfx Aasw D Awme Eep distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 2024, pressure 70 t throat 325 mm stroke 800 mm die cushion capacity 35 t drawing stroke 280 mm ejector stroke 240 mm rapid traverse - down 650 mm/sec working feed 58-199 mm/sec dayligth 1050 mm table surface area 900x580 mm ram surface 460x460 mm total power requirement 45 kW weight of the machine ca. 6,3 t Hnsdpfovn U Sxsx Aa Esp dimensions of the machine ca. BxTxH 1000x2200x4000 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, A used four-column automatic punching press MABU with MPC200 control in very good technical condition. Compressive force 30° before UT: 250kN Stroke rate, infinitely variable: 80-400 rpm Stroke adjustment: 7-62mm Tool holder: Diameter 40H7x90mm Clearance between the front/side uprights: 404/334mm Further tech. Data see pdf- document. Hnsdpjuh U Etsfx Aa Eep Tech. Data and dimensions: Errors excepted.

Condition: used, pressure 10 t Hnedpfx Aajd R Szuj Eop stroke 400 mm feed down 200 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 8,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. m

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Hnjdelc N Ryjpfx Aa Ejp